Пікірлер

• 
  @bswins96483 күн бұрын

  Thanks for making this follow up video to your original troubleshooting vid. Looks like I need to order some new belts. 👍🏻

• 
  @buildingwithpapa3 күн бұрын

  Thank you for your comment and don’t forget in the description. I have the link for buying the belts.

• 
  @edgarbiii46617 күн бұрын

  Can these be installed on hollow doors?

• 
  @buildingwithpapa7 күн бұрын

  They’re designed for solid core doors and fire doors for emergency exits. They would not work well on hollow corridor. I hope this helps you and if you can leave me a thumbs up.

• 
  @jcb6158 күн бұрын

  Thanks for the video. I had this same issue and discovered a bad cable.

• 
  @buildingwithpapa8 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @jcb6156 күн бұрын

  @@buildingwithpapa Done!

• 
  @gregarchipow76439 күн бұрын

  best one I've seen so far

• 
  @buildingwithpapa9 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @AmenMoto9 күн бұрын

  Beautiful

• 
  @buildingwithpapa9 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @michelewaters415410 күн бұрын

  Thank you for this video. I was able to replace my swivel cord and the side foam that was pretty beaten up with ease . You made this possible

• 
  @buildingwithpapa10 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @rrlivesay1310 күн бұрын

  This was super helpful! Thank you for making this a DIY repair for me, and for it to go so smoothly!

• 
  @buildingwithpapa10 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @dwightelliott607311 күн бұрын

  Nice job!!! Why did you have to reinstall the original brake battery?

• 
  @buildingwithpapa11 күн бұрын

  Thank you for your question. The battery was already installed inside the trailer, but it only operated the lights but was not being charged so I had to run the wire to the battery so that it would be charged off the seven pin. I hope you like the video and if you can leave me a thumbs up.

• 
  @user-hr4rj3zz6y11 күн бұрын

  USE A BRAKÈR BAR MY MAN !!!!

• 
  @buildingwithpapa11 күн бұрын

  Yes, the breaker bar would’ve definitely helped. I’m 68 and I start to think that I can still do these things without a little help. Hope you like the video and if you can leave me a thumbs up.

• 
  @rongray411811 күн бұрын

  Santo - the only thing that I would add to your video is that the Hydrometer test would have been great to see for each cell before and after. Blessing to You and thanks for posting your video!

• 
  @buildingwithpapa11 күн бұрын

  Yes, I’ve had that comment before and I wish I would have done that. I hope you like the video and if you can leave me a thumbs up.

• 
  @user-cw2pe6lf1r13 күн бұрын

  great video, thanks

• 
  @buildingwithpapa13 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @idreamaworld717715 күн бұрын

  Thank you for the video. Do you have to disconnect the battery before you do this? I read somewhere that you do. Want to make sure I didn't miss a step. Thanks

• 
  @buildingwithpapa14 күн бұрын

  Thank you for your question. I did not disconnect my battery and I didn’t have any issues but it’s not a bad thing to do. It won’t hurt anything so you may want to do it but it’s up to you. I hope this helps you and if you can leave me a thumbs up.

• 
  @idreamaworld717714 күн бұрын

  Thank you

• 
  @markeverson584915 күн бұрын

  You worked your tail off on that for your friend I hope you appreciate it looks good

• 
  @buildingwithpapa15 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @lindseymcconnell431016 күн бұрын

  You saved my vacuum!! Thank you!!

• 
  @buildingwithpapa16 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @pstoneking341817 күн бұрын

  Great video. Too bad those adapters don't come with the generators. Just another way to squeeze another $70 out of us.

• 
  @buildingwithpapa17 күн бұрын

  Yes, it’s all about the money.

• 
  @pstoneking341817 күн бұрын

  It seems ecoflow always has ways to get extra money from of us for adapters we need but aren't included with their units. That's another $70 for the adapter to connect the pro to the generator. You can cgarge from the generators AC Outlet but without all the generators smart features that monitors the battery level. Plus, using the included cable, you are charging with DC to DC, which is more efficient. Actually, ecoflow could have a smart generator connector built into the pro instead of using one of the extra battery port.

• 
  @buildingwithpapa17 күн бұрын

  Yes, I was stunned when I realized the cable would not connect to my Delta Pro. It doesn’t make any sense why they would sell you a generator that works with the Delta pro and give you a cable that won’t connect to it that you have to buy an adapter and then the other thing is the cables short if you have your batteries at one end of the garage and you wanna put your generator outside the garage the cables not long enough, I’m glad you enjoyed the video and if you can leave me a thumbs up.

• 
  @AmenMoto22 күн бұрын

  Pretty neat.

• 
  @buildingwithpapa20 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @erinpompa22 күн бұрын

  Thank you

• 
  @buildingwithpapa22 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @bswins964822 күн бұрын

  Great start to the daily video goal. Look forward to whatever you decide to post. If you're taking requests, I'm having issue with my Dolphin again...starts and stops...won't climb walls even with new rings...passes the "turn it over on it's back" self test just fine. I rewatched the Dolphin videos you posted prior, but if you have any advice on Dolphin pool cleaners, and/or a good replacement to consider, I would appreciate it. Regardless, I love all your vids. Keep up the great work!

• 
  @buildingwithpapa22 күн бұрын

  Thank you for your comment. I was just thinking of putting up another video on my dolphin cleaner. I have to put new tracks on and I’ve had a couple questions that I haven’t had issues with so I’m going to look a little further into my unit so thank you again, and if you can leave me a thumb.

• 
  @aGibby30525 күн бұрын

  Do you have any recommendations on a blinking red light? The bag is empty and the tracks are clear?

• 
  @buildingwithpapa25 күн бұрын

  Which unit do you have? I’m not sure what you’re talking about. A red blinking light. Mine doesn’t have any red lights.

• 
  @jannaredington8825 күн бұрын

  After only 2 years, I need to replace the cable!?! Amazon reviews state you one you linked to does not have FLOATS and their machine flips on its back. Reviews also state: Update after one year: - cable deteriorated such that the rubber jacket/coating rubs off by hand (and leaves a mess all over the pool) - a kink developed in the middle (anti-kink swivel eh???) such that the rubber jacket is compromised and exposed the internal wires - the buoyancy issues below persisted - the unit will no longer run A comment below states you do NOT have to buy the entire cord, you can just buy a replacement swivel cable? 🤷‍♀️ Will NEVER purchase Maytronic products again. For the price, I have had to replace the far too many parts on this machine. You cannot find good quality in products anymore.

• 
  @buildingwithpapa25 күн бұрын

  Thank you for your comment. I showed to take the floats off my existing cable and put it on the new cable. I also show how to diagnose it whether it is the cable or not so you’re not replacing all the parts the moving parts that deteriorate just because I had them out, I hope this helps you and if you can leave me a thumbs up.

• 
  @robjaron842225 күн бұрын

  Still does not work! Replaced all components : guide wheels, pulley wheels, treads, and new wire cable. Motor engages and starts. But device fails to move through a cleaning cycle. Fan is spinning/water is moving but device will not crawl. :( Alot of money to purchase and now repair parts cost. Only 3 years old.

• 
  @buildingwithpapa25 күн бұрын

  Thank you for your comment. Did you do a diagnostic like I show on the video this way if it is a cable you just replace the cable I do recommend replacing the rollers and the pads because they do wear out. I hope this helps you and if you can leave me a thumbs up.

• 
  @bobjayp27 күн бұрын

  What about tinting the primer if you are doing dark paint.

• 
  @buildingwithpapa27 күн бұрын

  Thank you for your question. Yes you can tint the primer. I hope you enjoyed the video and if you can leave me a thumbs up.

• 
  @TimothyMagog27 күн бұрын

  Have pentair 920 prowler, runs for very short time and stops. Cannot climb side walls, continues to try then stops, also appears the back of the tracks (both sides) are slightly off the pool bottom

• 
  @buildingwithpapa27 күн бұрын

  I have not worked on that machine, but have you looked at the tracks? Are they worn down?

• 
  @tommyforgay895529 күн бұрын

  I wanted to know what the short hose is for. Also it Does come with a clamp for the Prime hose and it’s right there on the hose in the video. Also near the end he says that cup holder is to store the storage solution. No it’s where you place the end of the suction hose when not in use.

• 
  @buildingwithpapa29 күн бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @NormCote29 күн бұрын

  Kalorik air fryer rotisserie, how does it work model af-250ad2

• 
  @buildingwithpapa29 күн бұрын

  I don’t know anything about that air fryer. I hope you enjoyed the video and if you can leave me a thumbs up.

• 
  @NormCote29 күн бұрын

  Kalorik air fryer rotisserie, how does it work

• 
  @buildingwithpapa29 күн бұрын

  I’m not familiar with that air fryer if you can leave me a thumbs up.

• 
  @NormCote29 күн бұрын

  Can't get the rotisserie to work

• 
  @buildingwithpapa28 күн бұрын

  I don’t know what machine you have. Hope you enjoyed the video and if you can leave me a thumbs up.

• 
  @nancygaskins2813Ай бұрын

  Very helpful thanks

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @nancygaskins2813Ай бұрын

  Do you have to reprogram the vacuum when placing back in pool? after taking it apart.

• 
  @buildingwithpapaАй бұрын

  No, you do not have to reprogram the unit.

• 
  @brandonhandley488Ай бұрын

  How do you like it?

• 
  @buildingwithpapaАй бұрын

  I like it very much. It works very well. I hope you like the video and if you can leave me a thumbs up.

• 
  @javiervargas2542Ай бұрын

  I have the same exact set up coincidentally, thanks for the video

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment, I hope you enjoy the video and if you can leave me a thumbs up.

• 
  @user-cc5wt9pd8wАй бұрын

  Paint overspray specks went all over your porch .....

• 
  @buildingwithpapaАй бұрын

  Yes, I didn’t realize it at the time, but I had to replace the screen in that area. I hope you enjoyed the video and if you can leave me a thumbs up.

• 
  @domogini3149Ай бұрын

  How did you get the paint off your wood house😬

• 
  @buildingwithpapaАй бұрын

  Yes, when I was doing the video, I didn’t realize I was getting overspray on the screen so I just replaced the screen. Thank you for your comment and if you can leave me a thumbs up..

• 
  @chrisnewell2811Ай бұрын

  I have the same chair all it does is click when i turm it on Could that be the same problem

• 
  @buildingwithpapaАй бұрын

  Thank you for your question. Mine didn’t operate at all. It got stuck in one position so I’m not sure if it’s the same issue. I hope this helps and if you can leave me a thumbs up.

• 
  @Isyss18Ай бұрын

  Great video….how long did you leave the hose filling up the pump with water before you turned it on?

• 
  @buildingwithpapaАй бұрын

  I probably left it on about 15 or 20 minutes. It takes a while to refill the pipe when you drain the entire pipe just make sure you don’t have any leaks. If it takes you longer than 30 minutes then you may have a leak somewhere. Hope you enjoy the video and if you can leave me a thumbs up.

• 
  @madebymklanme1313Ай бұрын

  Hello. How does the sandpaper attach?

• 
  @buildingwithpapaАй бұрын

  Thank you for your question. It’s hook and loop so it attaches easily. I hope you like the video and if you can leave me a thumbs up.

• 
  @deadcleanerАй бұрын

  Thank you for the instructional help putting this together

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @ratusbagusАй бұрын

  It's called a microswitch if anyone out there wants to go look for the part. There's different ones, 2 wire, 3 wire, 2way y ones etc. but they're std sized and easy tobuy off Amazon.

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @ratusbagusАй бұрын

  But of course Matey. BTW. You inspired me to disassemble my smoking airfryer and clean out 80% of the fat it had accumulated. It refused to die on reassembly so I baked a baguette in it to make it smell nice and fresh. Love from London.

• 
  @EODHammerАй бұрын

  Excellent! Thanks!

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @darlaperry5670Ай бұрын

  how do you tighten the gear that hooks to the motor? That is my problem. I have checked everything else in the video, but that keeps pushing out?

• 
  @buildingwithpapaАй бұрын

  Which unit do you have? Do you have the Nautilus?

• 
  @artinistАй бұрын

  Can you please explain what the three settings on the controller do, I have not been able to find out

• 
  @buildingwithpapaАй бұрын

  I don’t know which power supply you have, but it’s usually number one is every day cleaning number two cleans every other day and number three cleans every three days. I hope this helps you and if you can leave me a thumbs up.

• 
  @lynnreynolds905Ай бұрын

  Great video I was looking for something that would help me put this together and this worked. Thanks

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment. I’m glad you like the video and if you can leave me a thumbs up.

• 
  @phigo4kinsАй бұрын

  Please, How did you Find this Leak? Its Shocking How The Drywall is not even Wet. So Trying To Find it With Traditional Method Of Using Moisture Meter is not going to work/find it. So this Is Scary, Because I Have This Problem too. I Smell Mold/Mildew In My House, But I Can't Find it. Its Been Making Me Sick For Years Now. I have Had Numerous Mold Inspectors Come Out, But None of them can Find anything. I Have Scoped The Whole House Inch By Inch With Moisture Meter and Infrared Camera, Yet Can't find/come up with anything. This could Be My Problem, Because I Keep Hearing Some Type Of Tank Running/Filling up Or As if My Water Heater Pump Keeps Running even though there's nobody in the house Using Water.. So Apparently the Water is Probably Being Lost Somewhere/Somehow.. I Wonder how you were able to Locate this Leak Please.??

• 
  @buildingwithpapaАй бұрын

  Thank you for your question finding a leak take someone who has knowledge, but can also look and see things that are happening differently. I have a real knack at this. I’ve been able to find leaks for people that couldn’t be found by anybody else I live in Florida Fort Lauderdale I don’t know where you are And it sounds like you’ve spent quite a bit trying to locate this problem. I would love to be able to help you but it’s hard to give you any insight I would need to be there physically too inspect the home.

• 
  @lauraklein5856Ай бұрын

  Papa, Your a crudge-mutton! Old guy who knows things you can’t find in books!

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment and if you can leave me a thumbs up.

• 
  @juanrpolloАй бұрын

  I made the mistake of following your instructions and checking continuity between source and unit, not realiziNg that the swivel also has contacts. The swivel cable has spring loaded pins and if the springs fail, there is no contact. A replacement swivel cable costs a fraction of the entire cable.

• 
  @buildingwithpapaАй бұрын

  Sorry to hear that, but I did not have a swivel cable. Mine was stationary with the swivel, you would have to disconnect that part and then do your continuity test sorry for the confusion. I’ve had good response with this video and has helped many people and no way that I intend to mislead anybody. I hope you still enjoyed the video and if you can leave me a thumbs up.

• 
  @juanrpolloАй бұрын

  No problem, turns out my old swivel was fine, I discovered it when the replacement cable failed and upon testing it was the swivel which turned on and off. I just thought that people should be aware and maybe sabe some bucks by replacing just the swivel.

• 
  @BrokefromsmokeАй бұрын

  Thank you 💪🏿

• 
  @buildingwithpapaАй бұрын

  Thank you for your comment. I’m glad you enjoyed the video and if you can leave me a thumbs up.

• 
  @prashanthprakasam8246Ай бұрын

  Wow really a great job sir. What is the height of the bucket and how tall is the tower?

• 
  @buildingwithpapaАй бұрын

  Thank you for your question. Mine is a little over 9 feet tall but all depends on the buckets you’re going to use. I made mine quite big but you can use less buckets and a smaller water container. I’m glad you like the video and if you can leave me a thumbs up.

• 
  @prashanthprakasam8246Ай бұрын

  @@buildingwithpapa Sure :) Are you still doing aeroponics? Any update video ? and what is the wattage of the submersible that you are using ?

• 
  @ShitlikeyouАй бұрын

  Just ordered cable. Let me try. Appreciated your video

• 
  @Thomas-fo9zuАй бұрын

  Can I use the 7 pin that runs the trailer lights to charge the winch battery?

• 
  @buildingwithpapaАй бұрын

  Thank you for your question. As long as it’s a 12 V yes you can. I’m glad you liked the video and if you can leave me a thumbs up.