Пікірлер

• 
  @davidlowe75355 күн бұрын

  Do you have a clear picture of the torque specs?

• 
  @herpabetic5 күн бұрын

  @davidlowe7535 negative but all specs are online per make and model

• 
  @morrisschwarts482611 күн бұрын

  I use 2 large C channels. Only difference is I don't bolt them together like yours. I haven't had a problem but yours looks more solid.

• 
  @herpabetic11 күн бұрын

  @morrisschwarts4826 yea I have used a similar set up a few time..but thos works great too

• 
  @paullybrew111 күн бұрын

  It looks like you put the tone ring on the wrong side .

• 
  @herpabetic11 күн бұрын

  @@paullybrew1goes in from one side.Only... The notch for the snap ring it is on the side. It slides in from it.Can't go the other way

• 
  @siphesihlegasa557815 күн бұрын

  Awesome job 👍

• 
  @herpabetic14 күн бұрын

  @@siphesihlegasa5578 thanks ...glad I could help

• 
  @siphesihlegasa557814 күн бұрын

  @@herpabetic you saved me a lot of money thanks you

• 
  @Movingcompanyhustle18 күн бұрын

  Great video. I just replaced mine. Does it need to be programmed? I’m not seeing code P160B.

• 
  @herpabetic18 күн бұрын

  @@Movingcompanyhustle Thank you. And no, it doesn't normally need programmed, but I normally will go back through it with a scanner. Certain things do need programmed in or reset, but not normally the globe plug modules

• 
  @user-mp3mt4rz3w18 күн бұрын

  My dream truck, looking for a cab myself 😈🤟

• 
  @herpabetic14 күн бұрын

  Sold come get...lol

• 
  @dariusbrown537821 күн бұрын

  Nice video I’m doing the same thing now 🎉

• 
  @herpabetic21 күн бұрын

  @@dariusbrown5378 join the fun...lol..

• 
  @TheQwerty4me25 күн бұрын

  How would I go about just deleting the def system for off road purposes?

• 
  @herpabetic25 күн бұрын

  @@TheQwerty4me Honestly, just by the kit and you will have to reflash your computer to accommodate equipment without the d.P f system

• 
  @herpabetic25 күн бұрын

  If you need any info or anyway, I can help you. Just let me know.I try to get back to everybody that messages me

• 
  @TheQwerty4me25 күн бұрын

  @@herpabeticI’m not concerned with the dpf or the egr. That can stay in there. My question is how can I delete just the def system. The pump is bad and the dealer wants $4000 to fix it. I’d like to just bypass the DEF system with a tune so I could use it off road. It’d be wrong to sell the truck with the system deleted though so I wouldn’t want to take any physical components off.

• 
  @herpabetic25 күн бұрын

  @@TheQwerty4me Okay, now I understand but it will definitely end up.Plugging up on you if you don't match the system with the correct computer and settings

• 
  @aztecfighter529 күн бұрын

  Jesus you inhaling that brake dust😢

• 
  @herpabetic29 күн бұрын

  @@aztecfighter5 cancer time...lol

• 
  @upsidedowndog1256Ай бұрын

  Hell yeah!

• 
  @Stan69voАй бұрын

  +2 HP nice work

• 
  @GTA-7Ай бұрын

  awesome!

• 
  @Hanzo_FNАй бұрын

  Nice work broda, earn you a subscribe😁

• 
  @TheR4RАй бұрын

  How many horsepower did it lost?

• 
  @herpabeticАй бұрын

  @@TheR4R might have gained one or two horse Maybe just wanted it louder

• 
  @ares679Ай бұрын

  Here in southeast asia some modifies their stock muffler into loud exhaust just like that but a lot smoother sound, first you remove all the suppression and catalytic of your stock muffler until it's fully empty and then add rolled metal mesh from the main pipe to the muffler end, and then fill the inside of the muffler with fiber wool, seal it and you're ready to go. If you find my idea confusing just search "Kalkal pipe tutorial" here on youtube and check on it 😁

• 
  @KEREMCE001Ай бұрын

  Hı where iş the vin code frame

• 
  @herpabeticАй бұрын

  @@KEREMCE001 I couldn't tell you exactly, but I can tell you normally stamped a few places on the frame and you will not see them if it's all rusted out. You've got to clean it the whole thing

• 
  @AdamLassiter-zn2nbАй бұрын

  Nice video!

• 
  @Mendez06Ай бұрын

  Nice video im getting ready to bag my 80 caddy this was super helpful thanks.

• 
  @herpabeticАй бұрын

  Welcome man. That's why I do it. I'm always frustrated when there's no instructions with stuff anymore

• 
  @Mendez0619 сағат бұрын

  Yeah my kit didn't come with instructions as well 😒

• 
  @ibrahimibro9452Ай бұрын

  Is iz possible to go from coil to airmatic ?

• 
  @herpabeticАй бұрын

  To be honest, you could do anything you wanted with any spring and coil. And air suspension anymore. They make just about anything. You could imagine Google it. I'm sure you'll find what you're looking for I've been converting a whole bunch of vehicles back-and-forth. And they make better air systems than what is featured on that car. In the video as well

• 
  @korek637Ай бұрын

  Good shit my guy🫡

• 
  @herpabeticАй бұрын

  Hell yeah you're welcome bro

• 
  @herpabeticАй бұрын

  There's a lot of cool stuff on my channel if you have time to take a look

• 
  @uredskivid2 ай бұрын

  I'm STILL struggling with the drum 'jack screws' what the heck.. diameter and thread pitch... are those push/ jack screws?

• 
  @herpabetic2 ай бұрын

  Yes, there is a slight push clip and there is two on each drum

• 
  @andrewpena26242 ай бұрын

  How many tons is your jack and stands

• 
  @herpabetic2 ай бұрын

  I ran I believe two 6 ton jack stands and two 3.5 ton jacks... These trucks are pretty darn heavy buddy, but you can pull it off. Just be safe, don't chance it. Man, make sure everything is on point

• 
  @uredskivid2 ай бұрын

  Best video . Get yerself a camera tri pod .. THANKS

• 
  @herpabetic2 ай бұрын

  L o l yeah definitely need to.. Gonna start to go fund me for all the stuff. I need to make this better. Ha ha ha.. No I will do some investing, but yeah, I plan on keep making videos. It's working out OK besides stuff like this has saved my ass. Multiple times

• 
  @joepearlzz85042 ай бұрын

  What codes did you get to change these sensors? I get multiple codes, but started with po0016 crank/cam position correlation bank1 sensor A

• 
  @herpabetic2 ай бұрын

  Sorry I've been extremely busy anyway. I've got a good scanner and I went off live data of what was a sporadic reading if I remember right. It has been a while but I was giving a horrible reading on a cam sensor if I do recall correctly. I don't have the code anymore, but I know it did work. This was on a customer's car

• 
  @manthis222 ай бұрын

  What was the brand of those bars?

• 
  @herpabetic2 ай бұрын

  Sorry I've been very, very busy, but it has been so long. I can't honestly remember what brand bars does were. I will ask my friend that I put them on his bike for tomorrow. He no longer owns that bike he has bought a newer one. I will try to remember the name of those

• 
  @speedwayman1002 ай бұрын

  where's part 2?

• 
  @herpabetic2 ай бұрын

  Unfortunately me and my partner building this at a fallout. I never did get to finish it. I've got some more footage on my phone, but it's kind of useless

• 
  @bbrown-ed6if2 ай бұрын

  I like it, great job on the fab and welding !!

• 
  @herpabetic2 ай бұрын

  Much appreciated, even though we can buy them cheaper. I know mine was made better. Ha ha ha

• 
  @PaperBoy962 ай бұрын

  How much to install that same unit on tge same type of ride? And where would i have bring my ride?

• 
  @herpabetic2 ай бұрын

  I'm in Tacoma Washington..but super buried

• 
  @ATVR672 ай бұрын

  nissan did not pair up with dodge cummins is not dodge dodge buys cummins engines from cummins not owned buy dodge .

• 
  @herpabetic2 ай бұрын

  Yea..was a really weird combo..I just build what they want...lol...learnings..haha

• 
  @destinhook38262 ай бұрын

  Thanks for the video man it will help a lot

• 
  @herpabetic2 ай бұрын

  Welcome sir

• 
  @alexxxnavaa2 ай бұрын

  I just bought this bike on Saturday does it only show the gas when ur running low ?? There no display on how much gas you have 😭

• 
  @herpabetic2 ай бұрын

  Yes a yellow/orange gas light..and you get about 10miles before u run out...I always refill mine at every 100 miles...they make it about 130...depending on how hard u are on the gas ...lol

• 
  @karelirodriguez4992 ай бұрын

  Thank you, you help me a lot!!

• 
  @herpabetic2 ай бұрын

  Welcome and I still make small videos on these

• 
  @storminnormangunworks49112 ай бұрын

  Can you please make an update video? And how to adjust them. How much for the kit?

• 
  @herpabetic2 ай бұрын

  Sorry buddy that car is long gone..but I left the bolt holes a hair big so that they could be adjusted any direction needed...any issues just let me know...these impala and caprice are a hard door to do

• 
  @bryantstewart91443 ай бұрын

  Is there a difference between cam shaft and crank shaft??

• 
  @herpabetic3 ай бұрын

  Most are separated..there are a few that are different..definitely check google..look at wiring schematics

• 
  @pineappleguy17573 ай бұрын

  Thank you so much, didnt know about rubber piece and second loosener

• 
  @herpabetic3 ай бұрын

  Always welcome boss

• 
  @alexandera4123 ай бұрын

  I am considering cleaning the EGR myself, but I am a bit afraid; however, your video has increased my confidence to do it. I wish you were in California; I would go to your shop without hesitation. Thank you so much for taking the time to make the video and explaining it very clearly; I appreciate the fact that you go straight to the source and the purpose of your videos and do not waste your time or our time as viewers; thank you for teaching very well. If you have the EGR gasket kit part number, please let me know, I would appreciate it. Thank you.

• 
  @herpabetic3 ай бұрын

  No sweat and you're definitely welcome.. I do have the part numbers at work... what year is you're truck also?

• 
  @alexandera4123 ай бұрын

  @@herpabetic is a 2014 Isuzu NRR. Also; by any chance do you know of a scanner for the is Isuzu that I can purchase to perform a Force Regeneration? maybe one that you know it works for sure for the 2014 Isuzu, Amazon or eBay? Years ago I bought one but it won't let me perform a force regeneration, I really appreciate your help.

• 
  @herpabetic3 ай бұрын

  I use an upper end autel 906 I believe..about 2k but does everything.. cheaper than snap on but lots of similar capabilities

• 
  @herpabetic3 ай бұрын

  @alexandera412 ok I must have thrown away the boxes but I do have the old set of egr coolers with numbers on them..I use napa auto parts for most parts or if u call isuzu they will provide the part numbers. Have you're plate numbers and vin available to identify

• 
  @alexandera412Ай бұрын

  @@herpabetic Thank you for all your help, my mechanic friend I did exactly the job you did, and it went well; we just had an issue with a bolt at the end of the engine where it attaches on the passenger side that broke; it took as a while a lot of drill bits to fix it; but in the end all worked out well. Thank you so much

• 
  @tonymata59683 ай бұрын

  How far in do you push new one? All vids on KZread are the type that bolts and this is my exact one ..I have c5500 Kodiak and I pushed my old one in to far and wore down the tip .. oops lol

• 
  @herpabetic3 ай бұрын

  It will stop...or bottom out..u will def know ...push all the way in

• 
  @feletoa1043 ай бұрын

  Diggin' the content and all the clear explanations. Getting ready to bag a '84 coupe deville. Just wondering about how much time did it take on this build?

• 
  @herpabetic3 ай бұрын

  Welcome..and a days worth of work just ake sure those lines are away from heat and exhaust pipes...and clamp em good.. they can rub through easily

• 
  @feletoa1043 ай бұрын

  @herpabetic appreciate you boss 🙏

• 
  @kieoneyoungphotos3 ай бұрын

  Is it manual only, or is there a powered option?

• 
  @herpabetic3 ай бұрын

  These ones are Manuel but very sure they have automatic ones as well just alot cheaper im sure

• 
  @herpabetic3 ай бұрын

  Sure there has to be an electric one by now..

• 
  @kieoneyoungphotos3 ай бұрын

  Please add a tripod so you can film your process! I enjoyed watching you do this!

• 
  @herpabetic3 ай бұрын

  Yes we will do soon...been needing to for sure

• 
  @kieoneyoungphotos3 ай бұрын

  @@herpabetic what city and state are you in? I'm in Dallas

• 
  @herpabetic3 ай бұрын

  @kieoneyoungphotos i am mostly in Eatonville wa outside of tacoma...sometimes las vegas

• 
  @Chris-ft9kf4 ай бұрын

  Where are you located? I'm looking for something similar for my farm truck.

• 
  @herpabetic4 ай бұрын

  Eatonville wa

• 
  @DoyleKeeton4 ай бұрын

  What bearing are you using for the spindle / rotor?

• 
  @herpabetic4 ай бұрын

  It's been a while, but i' pretty sure that kit came with bearings inside the spindle, it was all a kit

• 
  @JoseRivas-vo5tv4 ай бұрын

  En español

• 
  @herpabetic4 ай бұрын

  A little habla Español

• 
  @MrUriel2504 ай бұрын

  Don't you have to change the O-Ring? Does the old O ring still make a good seal? And whats that long rubber stick? Can be seen at 26secs in your video. My replacement filter (Bosch) came with it, not sure if it should be installed on the Isuzu or meant for other cars?

• 
  @herpabetic4 ай бұрын

  Yeah, I always a good idea to change it. I put it slight amount of grease on mine. So they stayed better longer. And yeah, put that little rubber piece back in

• 
  @MrUriel2504 ай бұрын

  Thanks. Which grease is good for it? Synthetic or red grease?​@@herpabetic

• 
  @voyasystem4 ай бұрын

  How much did it cost. I got a npr in seattle and I'm sitting about 1/2" of bump stop

• 
  @herpabetic4 ай бұрын

  If I remember correctly around 1500 for springs

• 
  @voyasystem4 ай бұрын

  @@herpabetic where's your shop. I'd like to chat about it more

• 
  @herpabetic4 ай бұрын

  @@voyasystem Part of the time Eatonville Washington, the other part Las Vegas. I mean eatonville for a few more months

• 
  @herpabetic4 ай бұрын

  @@voyasystem There's a place in Tacoma that I get Springs made. They are the fastest that I can tell you and definitely a lot cheaper than ordering... I ordered a set. It took me 3 months to get him and I had him set made over here. I had them the next day

• 
  @kalef12343 ай бұрын

  My 06 has 3 leaves on the front, two seems like nothing!

• 
  @user-md3xw3cf7l4 ай бұрын

  Good day. Do you know where I can get the old original exhaust system. I have to take my Nissan for warrant

• 
  @user-md3xw3cf7l4 ай бұрын

  Good day. Do you know where I can get the old original exhaust system. I have to take my Nissan for warrant

• 
  @user-md3xw3cf7l4 ай бұрын

  Good day. Do you know where I can get the old original exhaust system. I have to take my Nissan for warrant

• 
  @herpabetic4 ай бұрын

  I kept all this guys exhaust he might be up for selling it

• 
  @user-md3xw3cf7l4 ай бұрын

  I need your old exhaust.

• 
  @Turd4203 ай бұрын

  😂

• 
  @DJDISCIPLEDREW5 ай бұрын

  How would you make the car not slam to the ground. Add some ride height? I'm fixing to install bags on mine.

• 
  @herpabetic5 ай бұрын

  O k that could be answered in two ways... How fast it drops... Or how low it go

• 
  @herpabetic5 ай бұрын

  There is adjustable valves to slow down how fast it goes down. And on the other ends, I like to make mine just high enough. To drive but I do that by measurement. And you can extend the cup pieces or shortening for heist

• 
  @DJDISCIPLEDREW5 ай бұрын

  @@herpabetic OK thank I will probably have to end up extending cups. Thanks What's the best way to get a higher hop with bags?