Пікірлер

• 
  @romuloecija262757 минут бұрын

  HI there, will this be compatible with the ClimateLineAir Air Tubing of ResMed AirSense 10? If so, can you show us how to do it? Thank? I new that Lunin Bullet is not compatible with my Air Tubing, I am hoping this one is. I hope you will find time to address my question. Thanks.

• 
  @user-ju8jg1fj6m9 сағат бұрын

  i can not open the water tank - what can i do ?

• 
  @dr.m.h.patterson8121Күн бұрын

  This is the most helpful of all the tutorials that I've watched - thank you Sir! I appreciate the mix of high level of detail but also keeping the explanations understandable for the layman. Thank you! Now, could you explain all of my philosophical thoughts about the world and the universe? THANKS!

• 
  @Amishjohn1986Күн бұрын

  I’ve not been able to sleep Since I got my new machine. I have been waking up with my nose itching terribly. I pray switching to manual and turning humidity up helps. Thanks for the video

• 
  @jenovaizquierdoКүн бұрын

  The WORSE nasal mask to use, I feel choking just because of how the nose part is, The ResMed machine always gives me high pressure with this mask because there is air leakage and my rating is low, I bought the ResMed AirFit P10 and it been wonderful and it feel much better, I can sleep much better now.

• 
  @Bo-zf2rjКүн бұрын

  What about when there is no electric power during the storm?

• 
  @mariaesthergonzalez5399Күн бұрын

  How you uploaded the cpa machine I stop using for 2 weeks and when I start using again they said uploaded before use tonight what I have to do to uploade.

• 
  @en6ads2 күн бұрын

  Can we get a summary of what voltages these devices need? I have a Z2 Auto which runs on 12v and 15v which is great, can use with any USB PD powerbank or 12v in car. Which others here run 20v, 15v or 12v?

• 
  @xxstaindrosesxx2 күн бұрын

  Thank you for making this video. I just purchased this battery to use with my CPAP since I have an upcoming flight and I found the directions a little difficult to navigate. Watching this video made everything self-explanatory so I really appreciate it.

• 
  @jamesmaestro53903 күн бұрын

  Why does my screen stay on after turning air flow off? I’m re-paping and my new machine is the Luna G3

• 
  @rebelrailroader3 күн бұрын

  Connectors don't work with my machine. They aren't they same style connection I have for my heated tube.

• 
  @lindagrace24 күн бұрын

  I've had my AirMini a few months now and have used it multiple times. Here's what has not worked for me and how I fixed it. I'm SUPER happy with what it is now. First of all I did not like the tube that came with it. Not sure why because it looks close to the one I replaced it with so it took me a while to change it but I tried the regular slimline tube. I got an adapter for it (very inexpensive) to go into the mini and use my regular headgear/mask combo. The therapy is now steady and I can even lower the pressure. With the original tube I kept having to jack up the pressure not to snore but it would get uncomfortably high and disrupted my sleep. Secondly I did not like the humidifier capsule that can be used in the mask but I do need humidification (allergies): I would wake up with a gummy feel in my mouth - very unpleasant. I can do one of two things: the simplest is the wet a washcloth (soaking wet) folded and placed it near the air intake of the mini, works super well. The other option is a mini humidifier next the intake: the water vapor does shoot up in the air but then it falls around the mini and that works perfectly to relieve dryness. Hopes this helps someone. I have found the mini very quiet, not really any different from my Airsense 11 or the previous 10 and I am horribly sensitive to noise. I'm saving money not buying the expensive humidifier capsules or the AirMini tube, just a standard slim line from the Drugstore for under $10.

• 
  @charlenewilson10244 күн бұрын

  How to work the wifi

• 
  @bellarose-au5 күн бұрын

  Brand new iBreeze 20A Pro ("for women"). The menu screen shows WiFi ON, status NOT CONNECTED. Then is says: "PLEASE USE YOUR SMART PHONE TO CONFIGURE WIFI INFORMATION. FOLLOW THE MENU DEVICE-> INITIALISE WIFI CONNECTION IN THE APP." I also have an alert on the machine screen saying: "PLEASE USE YOUR SMART PHONE TO CONFIGURE WIFI INFORMATION." My phone might be smart, but I am not. How do I use my phone to make the WiFi work on the CPAP? Can I use my tablet instead? (I don't want any more stuff on my phone. I don't know if I have any space left on it). Why does the instructions manual not have these instructions in it? And... why does my new machine make a little high pitched whistle noise when I'm exhaling? Oh, I hope you still monitor this channel and respond to viewers... I didn't think of that... 🤦🏻‍♀️

• 
  @bellarose-au5 күн бұрын

  After 10 years on CPAP, (F&P ICON PRIMO, with Simplus F/F mask and a Resmed Quatro head strap), I bought a new machine yesterday. I bought the iBreeze Auto 20A Pro. It was a bad first sleep attempt. Every time I exhaled, I could feel my breathing and the machine pressure change. It was so disconcerting and uncomfortable that I just couldn't sleep. I got to the point I wanted to give up and cry. After watching this video, I now know why. Hopefully I can figure out how to turn the exhalation thingy off so I can sleep a little easier. Severe sleep apnoea combined with insomnia, chronic pain and a new strange machine doing weird things was just a little too much. Thanks for the video.

• 
  @Rusty65075 күн бұрын

  What machine is that. I cannot find F&P machines in the US. WHY?

• 
  @sandan23585 күн бұрын

  How do you clean it

• 
  @themarktauber6 күн бұрын

  My 8-year-old ResMed is pre-set at 12 cmH2O to treat my apnea. The Luna G3 B, I was told, automatically adjusts pressure to appropriate levels for number of episodes of apnea. The Luna provided only 7-9 cmH2O throughout the night. I woke up sleep impaired. It was like I didn't use a CPAP at all. What should I do?

• 
  @Guitarbarella6 күн бұрын

  Went from the f20 mem foam to silicone to the Quattro mirage- thought I’d hate the Quattro- love it way better than the f20. Much better to seal at high pressures. F20 is not as good - can breath easier in the Quattro too

• 
  @faridehhosseiny3976 күн бұрын

  Thanks for great info. Very helpful

• 
  @thanos1000000fc7 күн бұрын

  Do you recommend a heated humidifier for people with a tracheostomy?

• 
  @CPAPmyway6 күн бұрын

  That unfortunately is a Dr question. I know that most of the customers I have dealt with use heated humidifiers, and they are the high end versions of the humidifiers.

• 
  @thanos1000000fc6 күн бұрын

  @@CPAPmyway I think everyone with a trach should have one.

• 
  @Jeremiah7-ox2nj8 күн бұрын

  This pimp likely works for Philips. DO NOT return your old, recalled CPAP machine. It's evidence you may need in case you have health problems later. Philips wants to remove your evidence to thwart any future claims. Don't fall for it!

• 
  @CPAPmyway7 күн бұрын

  That is the first time I have ever been called a pimp. And as a kid of the late 90s I will take it as a compliment. HAHA! No philips employees here. Do whatever you think is right with the CPAP return.

• 
  @Cathysnodgrass-zj5wp8 күн бұрын

  Can you use the F40 with the AirMini?

• 
  @CPAPmyway7 күн бұрын

  There is not an airmini adapter for the F40 yet, but there is an off brand adapter to help with that. Link below. cpapmyway.com/store/universal-tube-adapter

• 
  @fastsetinthewest8 күн бұрын

  I had the Portable Outlet CPAP Battery 2nd Generation plugged directly into the wall power source and my CPAP plugged into it. The Portable Outlet CPAP Battery 2nd Generation would get very hot. It finally died. I only had it work once when the power went out. When it died, I was fully awakened. Hahaha

• 
  @CPAPmyway7 күн бұрын

  That does not sound good. It has a warranty. Maybe you can get a replacement.

• 
  @fastsetinthewest7 күн бұрын

  @@CPAPmyway Thanks

• 
  @StilettoLafleur9 күн бұрын

  Thanks I needed this just got my machine.

• 
  @CPAPmyway8 күн бұрын

  Glad I could help

• 
  @kimberlyuryszvalade60869 күн бұрын

  Why does the diffuser filter turn black?

• 
  @CPAPmyway8 күн бұрын

  Maybe mold?

• 
  @sangrove6010 күн бұрын

  I'ved use a few. Pillows on small strap. Kept moving even with 6 hair clips with lots of air leaks. What I like is I'm 78 and have DISH which has taken out my left shoulder. With these clips I can deal with just right til in place where I can use my left too. First my old had an extended hose peice, but I lay on my back and hose keeper falling off bed. This hose swivels and can go behind my neck. Stays in place. My night mask goes under nose bridge piece, ear plugs,and mouth taped shut digally so water straw can be used. I'm go to go as long as I don't have to "go"😮

• 
  @CPAPmyway8 күн бұрын

  Good Luck!

• 
  @Rusty650710 күн бұрын

  Does this help with dry mouth? I cannot tolerate a chin strap…shoves my jaw into a painful position. Mouth tape helps, but that isn’t ideal.

• 
  @CPAPmyway8 күн бұрын

  Worth a try for sure.

• 
  @donnakaiser694211 күн бұрын

  Thank you! My tubing connector was fine, but the Grey circle wasn't positioned right and was leaking air LOUDLY! I saw how you positioned it when you were done and...ta-da! No more noise. Thank you so much!

• 
  @CPAPmyway8 күн бұрын

  Glad it helped!

• 
  @valerieconnery278112 күн бұрын

  Is the tube supposed to be blowing out air at the top? At the part where you hook it to the nose?

• 
  @CPAPmyway8 күн бұрын

  Some masks do that. What mask are you using.

• 
  @pitchkapizda835512 күн бұрын

  Yes they work the best just expensive

• 
  @CPAPmyway8 күн бұрын

  Thanks for the input.

• 
  @JF-kb3su12 күн бұрын

  Hi Great explanation and thank you. I have an Resmed air sense 10 and are under the care of the NHS UK which services it, I was issued a humidifier water tank yesterday at the hospital my set up is a standard Plastiflex classic 15 air tube (not Heated) Im using Nasal pillows with a humidity setting of 4 (default). My question is will the humidifier work with this set up, the humidifier green smiley face showed this morning after using last night on checking the water tank was still full on felling the water tank the water was at room temperature this was also evident of the warming plate at the bottom of the machine and water tank. do i need to apply any setting? Kind regards John

• 
  @CPAPmyway8 күн бұрын

  The humidifier will work with heated tubing.

• 
  @sharon9450312 күн бұрын

  One piece of important information is that if you are switching from an F20 to the F40 you need to switch your mask settings on your machine to pillows...this is due to the flexible mask AND the new additional length of hose.

• 
  @CPAPmyway8 күн бұрын

  Great input. Thank you.

• 
  @nickb853013 күн бұрын

  Luna = BMC M1 mini?

• 
  @CPAPmyway8 күн бұрын

  It is a BMC I will have to see what the M1 mini means. It is called the TravelPAP.

• 
  @lindathiessen722513 күн бұрын

  What if you want to interrupt the cycle. I mistakenly restarted when I wanted to open it.

• 
  @CPAPmyway8 күн бұрын

  It has to run through a cancellation cycle I believe.

• 
  @elizabetrodriguez777813 күн бұрын

  I did explain it compare one video I saw. Had hard time inside how to remove outlet seal. U explanation was better. Thank u 2024

• 
  @CPAPmyway8 күн бұрын

  Thanks for the input.

• 
  @McGillivrayDavid14 күн бұрын

  I can’t sync my blue tooth to dream mapper. It says can’t connect

• 
  @CPAPmyway8 күн бұрын

  You will have reach out to the DreamMapper team directly on that one.

• 
  @TraceyBecker-rk6jt15 күн бұрын

  Got the snow ❄️

• 
  @CPAPmyway8 күн бұрын

  Cool down process. it will blinking when the cool down is over.

• 
  @TraceyBecker-rk6jt15 күн бұрын

  Ya but I have a snow ❄️ what is this

• 
  @CPAPmyway8 күн бұрын

  Cool down process. it will blinking when the cool down is over.

• 
  @Ericoo15 күн бұрын

  I have the F20/F30 adapter for my F30 mask and when I exhale they make a lot of noise, you can hear the air coming out of the two holes in the adapter (the part that joins the mask, the one that says for Airmini), is this normal?

• 
  @CPAPmyway7 күн бұрын

  You will have exhalation coming out of the exhalation ports at all times while you are using it.

• 
  @spydude3816 күн бұрын

  I currently use an Omnicharge 20+. It provides multiple charging options to include DC out which you can setup for the output needed. I use it to power my Airmini. I can get 1-2 nights on a full charge. $249.00. Bonus is that you can actually power 120AC, USB-A and USB-C and it has pass through. Also meets TSA requirements.

• 
  @CPAPmyway7 күн бұрын

  Thanks for the input.

• 
  @knarf7825816 күн бұрын

  Thanks for this quick and simple video. The manual not clear at all on these filters. Good job to you for clearing it up.

• 
  @CPAPmyway7 күн бұрын

  Glad it was helpful!

• 
  @spigette16 күн бұрын

  Great video! I had to laugh though at "most people use Fahrenheit unless you're overseas" - my friend, the whole world including the rest of North America uses Celsius, even your neighbours to the North and South 😊🇨🇦.

• 
  @CPAPmyway7 күн бұрын

  HAHA! We do everything weird here. Keep us unique.

• 
  @marygaylebrown886217 күн бұрын

  How do you know which size to order?

• 
  @CPAPmyway7 күн бұрын

  There is a sizing gauge, but the setup pack has all sizes in most cases.

• 
  @maxshi230817 күн бұрын

  Does anyone need humidifier with travel CPAP machine? I`m struggling with dryness in mouth when using travel machines, anyone has walkaournd yet?

• 
  @nickb853013 күн бұрын

  there are waterless humidifiers but i have no experience with them yet, also they only fit certain masks by default. I made my own adapter to use my preferred mask but have not used it.

• 
  @CPAPmyway7 күн бұрын

  You can try an HME. That is what people on Travel CPAPs typically use. Link below explains this. cpapmyway.com/blog/what-is-a-hme

• 
  @nickb85307 күн бұрын

  @@CPAPmyway thanks!

• 
  @davidaldinger366618 күн бұрын

  I feel that if you have to use the muffler for the cpap to be quiet enough, it defeats the the purpose of making it small enough to travel with. Also I hate those big blocky plugs. They always take up all the space around them when you plug them into the wall. Better to have a regular plug and move the brick further down the wire.

• 
  @CPAPmyway7 күн бұрын

  Thanks for the input.

• 
  @chuckhaffner160218 күн бұрын

  I had been fighting with the noise coming from my AirMini. It was ridiculous compared to the 3B Luna II that I had for years and it compared even less favorably to the AirSense 10 that is my new "daily driver". Finally found out that the cause was the connector used for the HME. Somehow that thing just amplifies the noise traveling up the hose. After some experimentation, I found the best option was to eliminate the HME altogether, use a Zephair adapter to a Qlite muffler which then runs to a 15mm slimline hose. It's important to use a 15mm hose (still uses a 22mm connector) because that is the diameter of hose that the AirMini is optimized for. This setup will cost you the use of the HME for heat and humidification, but it will significantly quiet down the airflow out of the machine.

• 
  @CPAPmyway7 күн бұрын

  Great input. Thank you.

• 
  @jihadhakim371818 күн бұрын

  Thank you very much.

• 
  @CPAPmyway7 күн бұрын

  You are welcome!

• 
  @samescamilla7918 күн бұрын

  I had at least 4 thermal events. No notable fire but a smell of smoke similar to burning electronics or plastics. I did not know this was a problem unit the last time it happened. The first event was about 6 months ago. I’m worried that I could caused damage to my respiratory system while using this system. I have reported this to the manufacturer and to the FDA. I have not heard much from the manufacturer since I mentioned that I am concerned about what effects this could have on my health. I want to take the unit apart and to see what the root cause is but I would rather wait on FDA or other Lab to determine what happened. Until then I will not use the machine and uses my travel Cpap.

• 
  @CPAPmyway7 күн бұрын

  Thanks for the input.

• 
  @snowdrop62919 күн бұрын

  Thanks for the informative video I have had airmini for a long while but have hardly used it because I just couldnt get it right pressure wise. Sitting here in my front room wearing it trying out different pressures and it seems to be working. Question…. Is it possible /ok to use the air mini without the little round filter humidx insert? I dont need humidity on my airsense 10 so think I need it in this ‘dry’ format on the mini… any thoughts on that?

• 
  @CPAPmyway7 күн бұрын

  Yes you can use it without the HME.