Can you explain more about stationing over a point?
@FLALUCIANАй бұрын
I'm doing a multi-story building with identical floors. Is there a way to "un-stake" all the layout points in the project file, so I can use the same file for the next floor without loading a fresh copy of the project? I don't want to lose all my added points and offset identity's if I don't have to.
@gabrielriverex5221Ай бұрын
Hello. I only have hf files from the ps 1000 scanner. Can that software read hf files? thanks.
@Truey962 ай бұрын
Have you ever had an issue where points or walls aren’t showing up on the tablet in the field? Cleaned drawing, Put all the points in through the profis office software all my layers are active when I export the project but when they try to view on the tablet stuff will be missing
@igorvolkov40562 ай бұрын
thanks. from 3d view NW isometry I have shape drawing (not 3d ) in cad. Is it depend of computer's memory ets?
@adamarditi823 ай бұрын
Thank you very much. You did a awesome job of explaining best practices. Well done and much appreciated.
@tomaszwrona52374 ай бұрын
this freaking thing is so counterintuitive. I've spent 2 hours to do this exact thing but putting a floor plan instead of the 3d model on the sheet. Didn't work. Thank you man!
@paulhofer24184 ай бұрын
if the unit is half as complicated as these instructions, ouch
@riotwarrior4 ай бұрын
Can I overlay a PDF on a PDF of same drawing with slight updates? 99% of file is identical just a 3 or four points no marked as layout points in the drawing in Profis already. Essentially I want to overlay and use the new drawing instead of having to start from scratch.
@mgrazo4 ай бұрын
Is there any way to erase all the measure points created for an asbuilt in a faster way than erasing one by one on the tablet?
@JiggingDjent4 ай бұрын
Really happy with this video. My employer has this tool, but nobody was able to explain how to use it as well as you did. Thank you sir!
@user-sk7qw2iv9z5 ай бұрын
your videos are amazing. Could you do a video of the following topic. This will be for initial set up. Say you receive the CSV files from the surveyors with control points/reference points. How do you overlay those onto the blueprint in Profis
@sandorgulacsi46125 ай бұрын
I would like to ask for help because unfortunately I deleted hilti from Windows CE. How can I reinstall it on my metering device. Hilti pos 15
@NaniK19916 ай бұрын
Is there any way to export a drawing using autocad or other software ? It would be very halpful also. Great videos and much appreciated
@jirkapaidar35167 ай бұрын
*PromoSM* 🙈
@joshcollins91257 ай бұрын
Often, this is all I need from Revit but I’ve never known how to do it. Thanks! Have you got one which shows how to take a sectional view or floor plans at different levels?
@stacycoggin32297 ай бұрын
How do you get the PLT300 Emulator?
@fabriziodelgado74428 ай бұрын
So I'm trying to align a pdf of a Right of Way map to a geolocation map. Sometimes the projects I work with the area they take place in have too many trees so I have to find a winter/early spring/late fall picture. I want to know how to scale and how to get those measurements to be able to scale it perfectly.
@PPW8659 ай бұрын
Clunky software at best.
@whereisfubu76969 ай бұрын
Very nice. Great vid.
@ukkauak9 ай бұрын
Your screen is black, my dude.
@sameerbilkhu73149 ай бұрын
Great stuff, how do you copy/paste entities?
@Frikando19859 ай бұрын
Hey sir Your videos are really good and helped me a lot, I just started using Hilti PLT300 with PLC400 tablet. But I ran into a problem with materializing the axes with a laser on a vertical wall. I would really appreciate Your help! So, if possbile, should I write the problem here in comments, or there is some other mean of communication to explain the problem? Thanks in advance!! 🙂
@muxutruk73259 ай бұрын
Yes
@mateuszszostek48809 ай бұрын
Hi are there any chances that you have an installer for HCL when I tried to update to 6.1 and there were errors, so it does not work for me now and I can not even open it
@blabit49839 ай бұрын
What
@ukkauak9 ай бұрын
Always very helpful, comrade, thank you for your dedication through the years in helping to make sense of that program's interface, wouldn't have made it without you.
@paulgoble57219 ай бұрын
Hi really appreciate this video very helpful. Just wondering if you could do a video on how to use the direct reflex in setting out.
@user-fk4qc9uz5d10 ай бұрын
did you have driver for 6 pin to usb cable thanks...
@edclarke145710 ай бұрын
your explaination of "seating the button" i find very important failure to do so may cause pinching users hand.
@edclarke145710 ай бұрын
Very clear instructions good humor
@VladanSpasenovic11 ай бұрын
Hi, I have pos150/PLC400 and have a hard time to precisely navigate with laser. It jumps abnormally or does not move at all. Do you have any tips and tricks for better laser navigation by tablet?
@timd9430 Жыл бұрын
Thank you, you explain things very well and simply. 1:07 Do you have a video that explains the SURFACE (GROUND) vs GRID coordinates ans scale / combined scale factors? This seems very complicated. I notice the SURFACE (GROUND) vs GRID coordinates are different by as much as 1000'??? Why? That is substantial. Elevations (orthometric based on geoid) are the same? Thanks!
@1bryangomez Жыл бұрын
Hey, are you able to update your windows version? I tried doing it on mine but it says some settings are managed by your organization.
@patriciastirb2689 Жыл бұрын
Can you drop your email? I have some questions and I would really appreciate your help!
@patriciastirb2689 Жыл бұрын
Can you drop your email? I have some questions and would really appreciate your help!
@TheDarkhorse82 Жыл бұрын
How did you get the Prism at the bottom? Do you unscrew the bottom, and unscrew the knob/bubble on the prism as well? Such expensive kit i didn't want to start messing with it and breaking it lol
@m.doroshenko Жыл бұрын
Thanks for video. It helps a lot
@JeremiahGriffith Жыл бұрын
We have a vendor (sells/rents Leica) that is swearing by IFC exports. I see that they are at least 5 times the size of a cleaned up 2D dwg. Their rebut is that even though the IFC files are rather large comparatively speaking, the ifc is way more stable of a file type. Thoughts on this?
@MaR-wr8mz Жыл бұрын
Can the diameter of the bars be determined from the reports? Thank you
@user-zg2ts6iy6h Жыл бұрын
Is it possible to place the point inside the family and exporting it? so it will follow it during late coordination
@normanroscher7545 Жыл бұрын
Am I limited to the 2x2 or 4x4 feet scanning area if the paper grid, or can I scan an entire floor or wall with it, too? I want to use this in combination with a 3D laser scanner and a drone to create an LOD 400 BIM model of an existing building. This wall scanner is supposed to show where pipes, beams and cables are beneath the surface, to include them in the CAD model.
@charlesroberts9545 Жыл бұрын
Hi I’m kind of new to this . I am trying to import the file of control points to a new file on the same job . Everytime I select the file to import it says import failed . Is there something I’m doing wrong or is it not able to import control points to a different file . Thanks
@rono_ke Жыл бұрын
How do i change the rebar size for image scan if its preset to 20mm in profis
@ghnwaobroy2521 Жыл бұрын
If I Don't know the direction of the rebar , how can I take my quick scan? .
@robsawyer9816 Жыл бұрын
why would my license manager not show up after installing on REVIT 2022
@daviddean77783 ай бұрын
I am having the same issue on revit 23'. Did you ever find a fix for it?
@blazeice111 Жыл бұрын
My sketch function is creating a second point over the last endpoint every time I turn and do a new line. How do I fix this?
@Chevy1030juan Жыл бұрын
Using Trimble at the moment, is HILTI harder to use than Trimble?
@gopalchaudhary6966 Жыл бұрын
Nepali ma
@mgrazo Жыл бұрын
how accurate is using this direct reflect mode? Is it recommended to use this direct reflex mode to set the station elevation from an existing benchmark?
Пікірлер
Can you explain more about stationing over a point?
I'm doing a multi-story building with identical floors. Is there a way to "un-stake" all the layout points in the project file, so I can use the same file for the next floor without loading a fresh copy of the project? I don't want to lose all my added points and offset identity's if I don't have to.
Hello. I only have hf files from the ps 1000 scanner. Can that software read hf files? thanks.
Have you ever had an issue where points or walls aren’t showing up on the tablet in the field? Cleaned drawing, Put all the points in through the profis office software all my layers are active when I export the project but when they try to view on the tablet stuff will be missing
thanks. from 3d view NW isometry I have shape drawing (not 3d ) in cad. Is it depend of computer's memory ets?
Thank you very much. You did a awesome job of explaining best practices. Well done and much appreciated.
this freaking thing is so counterintuitive. I've spent 2 hours to do this exact thing but putting a floor plan instead of the 3d model on the sheet. Didn't work. Thank you man!
if the unit is half as complicated as these instructions, ouch
Can I overlay a PDF on a PDF of same drawing with slight updates? 99% of file is identical just a 3 or four points no marked as layout points in the drawing in Profis already. Essentially I want to overlay and use the new drawing instead of having to start from scratch.
Is there any way to erase all the measure points created for an asbuilt in a faster way than erasing one by one on the tablet?
Really happy with this video. My employer has this tool, but nobody was able to explain how to use it as well as you did. Thank you sir!
your videos are amazing. Could you do a video of the following topic. This will be for initial set up. Say you receive the CSV files from the surveyors with control points/reference points. How do you overlay those onto the blueprint in Profis
I would like to ask for help because unfortunately I deleted hilti from Windows CE. How can I reinstall it on my metering device. Hilti pos 15
Is there any way to export a drawing using autocad or other software ? It would be very halpful also. Great videos and much appreciated
*PromoSM* 🙈
Often, this is all I need from Revit but I’ve never known how to do it. Thanks! Have you got one which shows how to take a sectional view or floor plans at different levels?
How do you get the PLT300 Emulator?
So I'm trying to align a pdf of a Right of Way map to a geolocation map. Sometimes the projects I work with the area they take place in have too many trees so I have to find a winter/early spring/late fall picture. I want to know how to scale and how to get those measurements to be able to scale it perfectly.
Clunky software at best.
Very nice. Great vid.
Your screen is black, my dude.
Great stuff, how do you copy/paste entities?
Hey sir Your videos are really good and helped me a lot, I just started using Hilti PLT300 with PLC400 tablet. But I ran into a problem with materializing the axes with a laser on a vertical wall. I would really appreciate Your help! So, if possbile, should I write the problem here in comments, or there is some other mean of communication to explain the problem? Thanks in advance!! 🙂
Yes
Hi are there any chances that you have an installer for HCL when I tried to update to 6.1 and there were errors, so it does not work for me now and I can not even open it
What
Always very helpful, comrade, thank you for your dedication through the years in helping to make sense of that program's interface, wouldn't have made it without you.
Hi really appreciate this video very helpful. Just wondering if you could do a video on how to use the direct reflex in setting out.
did you have driver for 6 pin to usb cable thanks...
your explaination of "seating the button" i find very important failure to do so may cause pinching users hand.
Very clear instructions good humor
Hi, I have pos150/PLC400 and have a hard time to precisely navigate with laser. It jumps abnormally or does not move at all. Do you have any tips and tricks for better laser navigation by tablet?
Thank you, you explain things very well and simply. 1:07 Do you have a video that explains the SURFACE (GROUND) vs GRID coordinates ans scale / combined scale factors? This seems very complicated. I notice the SURFACE (GROUND) vs GRID coordinates are different by as much as 1000'??? Why? That is substantial. Elevations (orthometric based on geoid) are the same? Thanks!
Hey, are you able to update your windows version? I tried doing it on mine but it says some settings are managed by your organization.
Can you drop your email? I have some questions and I would really appreciate your help!
Can you drop your email? I have some questions and would really appreciate your help!
How did you get the Prism at the bottom? Do you unscrew the bottom, and unscrew the knob/bubble on the prism as well? Such expensive kit i didn't want to start messing with it and breaking it lol
Thanks for video. It helps a lot
We have a vendor (sells/rents Leica) that is swearing by IFC exports. I see that they are at least 5 times the size of a cleaned up 2D dwg. Their rebut is that even though the IFC files are rather large comparatively speaking, the ifc is way more stable of a file type. Thoughts on this?
Can the diameter of the bars be determined from the reports? Thank you
Is it possible to place the point inside the family and exporting it? so it will follow it during late coordination
Am I limited to the 2x2 or 4x4 feet scanning area if the paper grid, or can I scan an entire floor or wall with it, too? I want to use this in combination with a 3D laser scanner and a drone to create an LOD 400 BIM model of an existing building. This wall scanner is supposed to show where pipes, beams and cables are beneath the surface, to include them in the CAD model.
Hi I’m kind of new to this . I am trying to import the file of control points to a new file on the same job . Everytime I select the file to import it says import failed . Is there something I’m doing wrong or is it not able to import control points to a different file . Thanks
How do i change the rebar size for image scan if its preset to 20mm in profis
If I Don't know the direction of the rebar , how can I take my quick scan? .
why would my license manager not show up after installing on REVIT 2022
I am having the same issue on revit 23'. Did you ever find a fix for it?
My sketch function is creating a second point over the last endpoint every time I turn and do a new line. How do I fix this?
Using Trimble at the moment, is HILTI harder to use than Trimble?
Nepali ma
how accurate is using this direct reflect mode? Is it recommended to use this direct reflex mode to set the station elevation from an existing benchmark?