Ronnie Sox, Herb McCandless, Dick Landy, Bill Grumpy Jenkins, Hubert Platt, wether GM, Ford, or Mopar, these guys were the greatest 4spd driving drag racers of all time!!! I'm at The All Chrysler Nationals in Carlisle Fairgrounds in Pennsylvania, I just talked with Buddy Martin and Herb McCandless!!! Mopar Nate Philadelphia, Pennsylvania
@bgivco10 сағат бұрын
Right on!!
@homeiswheremyhouseis55172 күн бұрын
My 2016 is completely different. Chevy sucks.
@bgivco2 күн бұрын
Yeah, think they pulled a mid-year change
@homeiswheremyhouseis55172 күн бұрын
@@bgivco Mine is an obvious 2015.
@af4od022 күн бұрын
In a Cackle Dragster, is there two separate onboard fuel tanks, one for methanol, the other for Nitromethane with a valve to switch between the two tanks? Does anyone know what the nitromethane percentage is in a cackle car? Does anyone know how many start ups can a car like this make before some basic internal rebuild? Big Daddy always puts on the best show.
@bgivco2 күн бұрын
Big Daddy fills the small tank on the back of the blower with gasoline. He warms up the engine with gasoline then eases the nitro valve to full flow about the time the gas runs out. 92% nitro with methanol in the Swamp Rat tank. I've seen others run as high as 98%- 100%. Nitro doesn't mix with gas, that's where the methanol comes in. Gas lights easier that methanol and is usually cheaper, that's why Don uses it on warm up. Nitro is hard to fire when cold, that's why a warm up is needed. Most cackle engines are using hydraulic roller cams & don't need freshening very often. Set it up a little on the rich side and that helps keep it cool. Thanks for watching!!
@af4od022 күн бұрын
@@bgivco thank you for the reply. Lots of great information. I have always thought having a cackle fuel car for car shows would be fun. I did once briefly get to talk to Mr Garlits about his engine set up. It was real noisy at the time and I missed a lot of his information. I did catch that there are special cams available for cackle engines with more lobe overlap to help create more intense and lengthy header flames. I would guess also dialing in the fuel delivery and timing would be specific also.
@markmccraw88636 күн бұрын
Thanks sir! Very helpful!
@dukeofurl75936 күн бұрын
If the valves don't float a bit between shifts you ain't power shifting
@bgivco7 күн бұрын
Glad the video helped, keep working on stuff, thanks for watching!
@3m3TyB7 күн бұрын
Thanks! Not too bad to do, but it was easier on a 2012 cruze. Might modify my glove box for easier access.😁
@bstew2k1220 күн бұрын
What size tool are you using
@ethomaswhthomas4585Ай бұрын
Lol
@timothyortiz2222Ай бұрын
Lower front. Raise rear. She aint fine to me.
@jerryb10872 ай бұрын
Why are these people taking foot off the gas
@michaelmadrigale77162 ай бұрын
Who's your Daddy 😂
@shanehoward97563 ай бұрын
I didn’t see where you took panel off under steering wheel, only saw you put back on, why did you remove that
@JohnDoesItAll3 ай бұрын
Cigars and wing tips. That's tough guy shit right there❤
@bgivco3 ай бұрын
Right On !! Thanks for watching!!
@markeuringer81063 ай бұрын
I don’t try to over analyze the songs. You either like the song/group or you don’t. One can find things wrong with any song ( live vs. Recorded ) so I’d just sit back and view the song /group and leave it at that
@GordBirch4 ай бұрын
Good vibes brother
@ethomaswhthomas45854 ай бұрын
Look at those moves! That made me smile. Good vibes
@bgivco4 ай бұрын
Glad you liked it, having fun & put a smile on my face too ha. Thought about doing a daily song with some toolbox toe tapping. If you wanna rock and roll, I can get her done. All about coasting awhile and kickin' it at the house whooooooooooo Thanks for watching!!!!!!!!!!!!
@zitherzon21214 ай бұрын
Walking out in her leathers and heels all down the line: Ronny, Mick, Keef ( monitor man, some roadie another roadie. etc.) HilariousGILF Well done!
@rcwhore65485 ай бұрын
NOPE... you gotta learn " No Lift shifting....you did it all wrong 😢
@theolivabrassproject89535 ай бұрын
Today, I met Elena at her shuffle class in NYC. Not only is she world class, but she's also the nicest, most humble person you'll ever meet. Seeing her in person after watching her videos for so long was like witnessing a famous movie star walking into the room. I can’t believe I’m learning from the best.
@user-nl2gz7wt2o5 ай бұрын
Those old pro-stocks still kick ass even in the21st century 😮
@user-ev4pb9xj7e5 ай бұрын
😂😂😂 mustang boy and girl😂 don’t even think your in the same class as those drag racing legends 😂😂😂😂
@aniaurbanczyk60126 ай бұрын
I also appreciate their style, especially Sheryl's
@patrickmagee64597 ай бұрын
It's just not the same as the live versions with Mick Taylor playing lead slide guitar.. No fan of Ron Wood.
@bobburnett16919 ай бұрын
Giving you a big ten plus is REALLY under rating you you were GREAT !!!!
@frankviterise73339 ай бұрын
Big Daddy Don the goat!
@ARIZJOE9 ай бұрын
One of the most undervalued Stones' songs. Sheryl a great addition here. Ronnie's slide guitar a valuable complement to Keith rhythm.
@bgivco9 ай бұрын
Ronnie's underrated in my opinion & what else can you say about Keith. Don't think I'll ever get tired of listening. Keep rocking Joe, thanks for watching!!
@mikenukem62473 ай бұрын
4sure, Mick Taylor was under rated also so was Brian Jones with out him who what the Stones would have ever been. Music What have been way different, today.
@buckfutter70389 ай бұрын
What head and size are the screws? 7 mm?
@herbertluthe68509 ай бұрын
High heeled Sheryl - wonderful, yeah!
@chriswyckoff268410 ай бұрын
So every chevy cruze has the original filter then lol
@bgivco10 ай бұрын
Lol Chris, thanks for watching!!
@ggc25910 ай бұрын
Don't underestimate the abilities of the geriatric.
@bgivco10 ай бұрын
Got that right ggc259! Keep rockin' !!
@ArmandoMPR10 ай бұрын
Love this song. It’s two minutes and 30 seconds of pure energy.
@bgivco10 ай бұрын
Armando, thanks for watching & keep rocking!!
@fosterhellendoorn465610 ай бұрын
Keep it simple.!!! ❤❤❤ Hey! Hey!!! You got me rocking.!!
@bgivco10 ай бұрын
Keep rocking, thanks for watching!!
@sharksrcbash10 ай бұрын
A super nice guy and a total bad ass racer.
@bgivco10 ай бұрын
Yeah, Big Daddy is still a class act at 91yo, thanks for watching & keep wrenching!!
@user-br1gm3et5w10 ай бұрын
4x4
@tubingpro11 ай бұрын
Nice Thanks!
@bgivco11 ай бұрын
You're welcome, glad the video helped!! Keep working on stuff
@user-ee8cx4mw9w11 ай бұрын
Thank you!
@bgivco11 ай бұрын
You're welcome Tony, keep working on stuff and thanks for watching!!
@johnmano1439 Жыл бұрын
Hello. I have a '99 Civic whose horn only works sometimes... I hear the relay's clicking noises when I press the buttons on the steering wheel. I bought another horn at a junkyard, thinking it was the horn, but it turned out not to be, as both work hooked up to a battery... What could it be? Help would be appreciated from anyone...
@bgivco Жыл бұрын
Makes me wonder if the relay's suffering intermittent problems or a sketchy ground somewhere
@johnmano1439 Жыл бұрын
@@bgivco, thanks for your reply. I wish I could figure this out without taking it to an auto electrician who'll just charge me an arm and a leg... Also, a good professional is hard to find, where I live... I'll keep you posted.
@thereelmccoy1440 Жыл бұрын
This is a good video. This approach works but the process can be done by using the tabs inside the glove box. The glove box can be dropped down and then pulled out easily without removing all of the panels. I owned a '98 VW Beetle, and the dealership I bought it from once replaced my headlamp by removing something like 4 parts to complete it. Turned out, there was a tab on the side of the light housing that only needed to be slid down and the whole lamp pulled out easily.
@jessegale2740 Жыл бұрын
Thanks so much buddy!!
@bgivco Жыл бұрын
No problem Bro, glad the video helped, thanks for watching & keep wrenchin'!!
@designervados Жыл бұрын
Thanks for your video and help ☺ It's real be easy.. GM engineers must payed you!)
@bgivco Жыл бұрын
Glad the video helped, keep working on stuff & thanks for watching!! Rock-on😎
@YippeeKiYayMrFalcon Жыл бұрын
There's no mistaking it as a fiberglass Willys. Badass! 👊🏻💥
@vinegarbowl Жыл бұрын
No reassembly? Would have been nice to see everything go back into place and if there was any struggle to do that.
@emoneyyghoney6404 Жыл бұрын
Knowing the process of changing it guarantees me that i must change mines. This video was very useful! Thank you
@bgivco Жыл бұрын
Glad the video helped, thanks for watching & keep working on stuff!!
@frankgutierrez6016 Жыл бұрын
Wow. Look at how yo change cabin filter on the 2012 -2015. Like three minutes if that.
@skeets6060 Жыл бұрын
I learned to shift from Grumpy !!
@jesuscobarrubias9970 Жыл бұрын
Very detail video, thank you.
@bgivco Жыл бұрын
Jesus, glad the video helped, thanks for watching Keep working on stuff, rock on Bro!!
@jamielouwhoify Жыл бұрын
Thanks for the tutorial king!
@bgivco Жыл бұрын
Jamie, thanks for watching, keep working on stuff!!
@gaetanodetorrice5555 Жыл бұрын
Boy I think my 66 barracuda it does have a 4-speed would be a great looking gasser😅👍
@gaetanodetorrice5555 Жыл бұрын
I love gassers my friend has a Henry j with a hemi in it.
Пікірлер
Ronnie Sox, Herb McCandless, Dick Landy, Bill Grumpy Jenkins, Hubert Platt, wether GM, Ford, or Mopar, these guys were the greatest 4spd driving drag racers of all time!!! I'm at The All Chrysler Nationals in Carlisle Fairgrounds in Pennsylvania, I just talked with Buddy Martin and Herb McCandless!!! Mopar Nate Philadelphia, Pennsylvania
Right on!!
My 2016 is completely different. Chevy sucks.
Yeah, think they pulled a mid-year change
@@bgivco Mine is an obvious 2015.
In a Cackle Dragster, is there two separate onboard fuel tanks, one for methanol, the other for Nitromethane with a valve to switch between the two tanks? Does anyone know what the nitromethane percentage is in a cackle car? Does anyone know how many start ups can a car like this make before some basic internal rebuild? Big Daddy always puts on the best show.
Big Daddy fills the small tank on the back of the blower with gasoline. He warms up the engine with gasoline then eases the nitro valve to full flow about the time the gas runs out. 92% nitro with methanol in the Swamp Rat tank. I've seen others run as high as 98%- 100%. Nitro doesn't mix with gas, that's where the methanol comes in. Gas lights easier that methanol and is usually cheaper, that's why Don uses it on warm up. Nitro is hard to fire when cold, that's why a warm up is needed. Most cackle engines are using hydraulic roller cams & don't need freshening very often. Set it up a little on the rich side and that helps keep it cool. Thanks for watching!!
@@bgivco thank you for the reply. Lots of great information. I have always thought having a cackle fuel car for car shows would be fun. I did once briefly get to talk to Mr Garlits about his engine set up. It was real noisy at the time and I missed a lot of his information. I did catch that there are special cams available for cackle engines with more lobe overlap to help create more intense and lengthy header flames. I would guess also dialing in the fuel delivery and timing would be specific also.
Thanks sir! Very helpful!
If the valves don't float a bit between shifts you ain't power shifting
Glad the video helped, keep working on stuff, thanks for watching!
Thanks! Not too bad to do, but it was easier on a 2012 cruze. Might modify my glove box for easier access.😁
What size tool are you using
Lol
Lower front. Raise rear. She aint fine to me.
Why are these people taking foot off the gas
Who's your Daddy 😂
I didn’t see where you took panel off under steering wheel, only saw you put back on, why did you remove that
Cigars and wing tips. That's tough guy shit right there❤
Right On !! Thanks for watching!!
I don’t try to over analyze the songs. You either like the song/group or you don’t. One can find things wrong with any song ( live vs. Recorded ) so I’d just sit back and view the song /group and leave it at that
Good vibes brother
Look at those moves! That made me smile. Good vibes
Glad you liked it, having fun & put a smile on my face too ha. Thought about doing a daily song with some toolbox toe tapping. If you wanna rock and roll, I can get her done. All about coasting awhile and kickin' it at the house whooooooooooo Thanks for watching!!!!!!!!!!!!
Walking out in her leathers and heels all down the line: Ronny, Mick, Keef ( monitor man, some roadie another roadie. etc.) HilariousGILF Well done!
NOPE... you gotta learn " No Lift shifting....you did it all wrong 😢
Today, I met Elena at her shuffle class in NYC. Not only is she world class, but she's also the nicest, most humble person you'll ever meet. Seeing her in person after watching her videos for so long was like witnessing a famous movie star walking into the room. I can’t believe I’m learning from the best.
Those old pro-stocks still kick ass even in the21st century 😮
😂😂😂 mustang boy and girl😂 don’t even think your in the same class as those drag racing legends 😂😂😂😂
I also appreciate their style, especially Sheryl's
It's just not the same as the live versions with Mick Taylor playing lead slide guitar.. No fan of Ron Wood.
Giving you a big ten plus is REALLY under rating you you were GREAT !!!!
Big Daddy Don the goat!
One of the most undervalued Stones' songs. Sheryl a great addition here. Ronnie's slide guitar a valuable complement to Keith rhythm.
Ronnie's underrated in my opinion & what else can you say about Keith. Don't think I'll ever get tired of listening. Keep rocking Joe, thanks for watching!!
4sure, Mick Taylor was under rated also so was Brian Jones with out him who what the Stones would have ever been. Music What have been way different, today.
What head and size are the screws? 7 mm?
High heeled Sheryl - wonderful, yeah!
So every chevy cruze has the original filter then lol
Lol Chris, thanks for watching!!
Don't underestimate the abilities of the geriatric.
Got that right ggc259! Keep rockin' !!
Love this song. It’s two minutes and 30 seconds of pure energy.
Armando, thanks for watching & keep rocking!!
Keep it simple.!!! ❤❤❤ Hey! Hey!!! You got me rocking.!!
Keep rocking, thanks for watching!!
A super nice guy and a total bad ass racer.
Yeah, Big Daddy is still a class act at 91yo, thanks for watching & keep wrenching!!
4x4
Nice Thanks!
You're welcome, glad the video helped!! Keep working on stuff
Thank you!
You're welcome Tony, keep working on stuff and thanks for watching!!
Hello. I have a '99 Civic whose horn only works sometimes... I hear the relay's clicking noises when I press the buttons on the steering wheel. I bought another horn at a junkyard, thinking it was the horn, but it turned out not to be, as both work hooked up to a battery... What could it be? Help would be appreciated from anyone...
Makes me wonder if the relay's suffering intermittent problems or a sketchy ground somewhere
@@bgivco, thanks for your reply. I wish I could figure this out without taking it to an auto electrician who'll just charge me an arm and a leg... Also, a good professional is hard to find, where I live... I'll keep you posted.
This is a good video. This approach works but the process can be done by using the tabs inside the glove box. The glove box can be dropped down and then pulled out easily without removing all of the panels. I owned a '98 VW Beetle, and the dealership I bought it from once replaced my headlamp by removing something like 4 parts to complete it. Turned out, there was a tab on the side of the light housing that only needed to be slid down and the whole lamp pulled out easily.
Thanks so much buddy!!
No problem Bro, glad the video helped, thanks for watching & keep wrenchin'!!
Thanks for your video and help ☺ It's real be easy.. GM engineers must payed you!)
Glad the video helped, keep working on stuff & thanks for watching!! Rock-on😎
There's no mistaking it as a fiberglass Willys. Badass! 👊🏻💥
No reassembly? Would have been nice to see everything go back into place and if there was any struggle to do that.
Knowing the process of changing it guarantees me that i must change mines. This video was very useful! Thank you
Glad the video helped, thanks for watching & keep working on stuff!!
Wow. Look at how yo change cabin filter on the 2012 -2015. Like three minutes if that.
I learned to shift from Grumpy !!
Very detail video, thank you.
Jesus, glad the video helped, thanks for watching Keep working on stuff, rock on Bro!!
Thanks for the tutorial king!
Jamie, thanks for watching, keep working on stuff!!
Boy I think my 66 barracuda it does have a 4-speed would be a great looking gasser😅👍
I love gassers my friend has a Henry j with a hemi in it.