Пікірлер

• 
  @gamblehealthy928436 минут бұрын

  You did good brother

• 
  @kedrickdagogetta3428Күн бұрын

  What’s good bro where you got your axle done at for the 5x4.75 pattern

• 
  @lifeuptown7516Күн бұрын

  Straight Frame on Job perfectly done ✅👍🏽 can't wait to hear that motor start up my brother 💪🏽

• 
  @lifeuptown7516Күн бұрын

  Man it's so Important to know your car from front to back and top to bottom,, hands on you doing all your work homie,, I salute that for sure 💪🏽💯

• 
  @GoodShotLv2 күн бұрын

  aye bro you should start an affiliate account and start posting links to the stuff you use and make some extra $$

• 
  @odianosae2 күн бұрын

  Love you video Pimp! Can I get the part number for the longer wheel studs?

• 
  @edwardlover81753 күн бұрын

  "Whenever she get going..she is ready to stop!" 🤣🤣🤣

• 
  @terrywhite68353 күн бұрын

  I started my 84 caprice because of you

• 
  @GT-pf6nb4 күн бұрын

  If I got a wagon, probably be real ol school. 1960 something.

• 
  @tyler2384 күн бұрын

  Low key I love these updates bro.. I tune in every time… you need a shop bro 💪🏾

• 
  @stevebowcobrasvt80944 күн бұрын

  You doing ya thing on the box kinfolk 🔥🔥🔥🔥.

• 
  @AndresRodriguez-gl1io4 күн бұрын

  I got a 1989 chevy caprice classic for sale right now. CLEAN TITLE 89K MILES 1 OWNER !

• 
  @EnnisAutomotive4 күн бұрын

  Making great progress, I see it coming along.

• 
  @travisedwards57075 күн бұрын

  What headers are you running

• 
  @SouthSideNate4 күн бұрын

  Speed engineering long tubes!

• 
  @Starchybugger5 күн бұрын

  🤘

• 
  @blkmontecarlo5 күн бұрын

  It is looking great

• 
  @tyronedavis12045 күн бұрын

  Bet my bottom dollar it is a ignition coil grounding issue

• 
  @SouthSideNate5 күн бұрын

  hopefully it’s something simple but I honestly don’t know and i’m done chasing it, i’m gonna let the shop get me right. I’m ready to ride this baby.

• 
  @dmoney28984 күн бұрын

  He getting gas and fire. I believe it's something in the harness or the computer... I'm just up looking ugly then motor was doing the same thing basically and it was his computer... Dumb question but is the vats deleted?

• 
  @SouthSideNate4 күн бұрын

  @@dmoney2898 Not a dumb question! But yes the holly system already has all of that taken care of it just needs a start up tune because it’s not an stock engine. fully forged rotating assembly from bottom to the top, aftermarket cylinder heads, etc. if i had a windows operated laptop i could get someone to do it via mobile tune but i have all Apple products

• 
  @guaranteedj29425 күн бұрын

  Glad you came out my man!! Appreciate the love on my DGGM in the disabled spot!🫡

• 
  @wooteddy315 күн бұрын

  Nate I think you would do good if you tried 2 paint cars bra you like 2 take your time with your crafts

• 
  @victorblaylock49195 күн бұрын

  Hey Nate ,where you get the axles from and the rear brake kit From what company?

• 
  @SouthSideNate5 күн бұрын

  I forgot to share the links. 🤦🏾‍♂️ i purchased the axles from someone on facebook marketplace, the rear brakes are stock 96 impala caliper, rotors and pads all ordered from amazon

• 
  @ayjizzel5 күн бұрын

  Love 2c summer rain the process and progress is going up

• 
  @SouthSideNate5 күн бұрын

  She almost there i can’t wait to drive this baby!!

• 
  @ayjizzel5 күн бұрын

  Clean caprice and impala meet

• 
  @mikew.74555 күн бұрын

  I need the company you used for the disc brakes.

• 
  @SouthSideNate5 күн бұрын

  it’s a 96 impala rear end it’s all stock replacement parts

• 
  @SouthSideNate5 күн бұрын

  got everything from amazon

• 
  @mikew.74554 күн бұрын

  @@SouthSideNate appreciate bruh

• 
  @brucespivey85 күн бұрын

  💯

• 
  @javiersolis68005 күн бұрын

  You highly respect on my end… keep pushing every time you drop I watch every second of your videos!! Blessed!!

• 
  @SouthSideNate5 күн бұрын

  I appreciate that! 💯🦾

• 
  @Kmoney_19995 күн бұрын

  Wassup Southside Nate

• 
  @SouthSideNate5 күн бұрын

  What it do fam! 🦾💯

• 
  @Kmoney_19995 күн бұрын

  Wassup Southside Nate

• 
  @Worst_Part5 күн бұрын

  Bro you can get new holes drilled in the rear axles for 5x4.75

• 
  @SouthSideNate5 күн бұрын

  see you be thinking!! 🦾💯

• 
  @PrimeG25 күн бұрын

  Looking really good Nate, your work is A1 bro! Keep it up, I cannot wait to see the final result!

• 
  @bigt40076 күн бұрын

  My boy Nate really did a frame off without doing a frame off typeshit🫡💪🏾🔥🔥

• 
  @bernandoturner48406 күн бұрын

  Chevy Looks Great.. I think the White Letter Tires look the Best.. Please dont Forget the Sound Deadner' you where you can put it on every Crack of this Car.. Nice Build.. You the Real Deal.. That Sun Roof Top you Did look's Factory.! Stay Up' your A Good inspiration' for Man to Stay Busy.. idle man hands' is the devil mans hands.. I stay busy too.👍🏾🍀🍀🍀🍀🍀

• 
  @lario10306 күн бұрын

  💪🏾💪🏾

• 
  @Staytrue4ver6 күн бұрын

  Southside what it do gang? Hope all is well wit chu & the family! Salute my G.

• 
  @SouthSideNate5 күн бұрын

  Yessir!! All is good. Thanks 🦾💯

• 
  @renstonprince87256 күн бұрын

  That will make it not crank

• 
  @renstonprince87256 күн бұрын

  Bro did you hook up the o2 sensor

• 
  @SouthSideNate5 күн бұрын

  yes everything was connected when i was trying to get it started. A start up tune has to be done before it’ll start. It can be done remotely with the proper equipment and i’m sure i can find someone to come do it too. i’m just gonna finish doing what i can then send it to the shop so when it’s done there i can drive it o

• 
  @gosstg096 күн бұрын

  Liked before I even watched, know it’s gonna be a banga

• 
  @SouthSideNate5 күн бұрын

  Appreciate that fam!! 🦾💯

• 
  @makinithappengarage14886 күн бұрын

  596 views 120 likes, yall hit that like button support Brodie, he’s sharing knowledge we gotta do better ‼️ Support don’t cost 💲

• 
  @SouthSideNate6 күн бұрын

  Thanks for that!! 💯

• 
  @lario10306 күн бұрын

  🔒w bro you doing yo thang with this build💪🏾🥶

• 
  @mikewade28185 күн бұрын

  💯

• 
  @tyler2384 күн бұрын

  Btw congrats on the sponsors my guy.. I love to see that 💯 💪🏾

• 
  @DJ-du1mf6 күн бұрын

  Bro, how do I order them wheel stickers?

• 
  @SouthSideNate6 күн бұрын

  Tiresticker.com

• 
  @anthonygonzalez3526 күн бұрын

  Bro you've done too much work to this car you can find you a cheap set of 24s or 26s on marketplace and they would look a lot better on that car I think there's a guy in Knoxville got a cheap set of 24 inch irocs no tires but I think he wants like 400 bucks they would look sweet on your car 💯💯💯

• 
  @SouthSideNate6 күн бұрын

  I’m going to share a pic of the wheels i plan on getting!! The 16s are just some clean stocks to have temporarily. You speaking facts tho. the ones i plan on getting are 🔥🔥

• 
  @anthonygonzalez3526 күн бұрын

  @@SouthSideNate bro I'm just waiting to see that beautiful car on a nice set of aftermarket wheels like Jeezy said 22s or better LoL I just think if you got to change the wheels you might as well go ahead and put the final wheels on it and they need to be aftermarket no point in spending money on factory wheels 💯💯💯💯

• 
  @Tel08196 күн бұрын

  Man at least you have a positive attitude about that damage to your hood I just had a whole tantrum about a rock chip from a dump truck makes me feel foolish now.

• 
  @SouthSideNate6 күн бұрын

  When i first seen it i was pissed off. if i didn’t already have other things wrong ill still e mad frfr..

• 
  @Sweetdollar007Tv6 күн бұрын

  We ready for it

• 
  @SouthSideNate6 күн бұрын

  Me too! i just gotta pace myself not trying to go broke building this bih just to sell it when im done

• 
  @96southernboy146 күн бұрын

  What size are the wheel studs are you running on the rear end?

• 
  @SouthSideNate5 күн бұрын

  i shared the links in my last box chevy episode 57

• 
  @bigtim76276 күн бұрын

  What if you were up under the hood of your car when that happened? Not just there anywhere. Bullets ain't got no name on em

• 
  @SouthSideNate5 күн бұрын

  Facts!!

• 
  @turkeyssr6 күн бұрын

  Beauty! Keep on the grind!

• 
  @SouthSideNate6 күн бұрын

  Thank you! Will do! 🦾💯

• 
  @supersportrsz286 күн бұрын

  Can't wait to see that post when you get her running. Curious what the issue is for sure.

• 
  @SouthSideNate5 күн бұрын

  It needs a start up tune! i’ve done tons of research and tried everything just to find out that it’s not going to start without a start up tune.