Don’t look, Ethel! Too late. She’s already been mooned. But this is helpful since I have to undertake this project. I’m not looking forward to the puzzle.
@MarkRadle8 ай бұрын
Thank you very much your video help me alot i was ready go crazy could not find anything on KZread tell yours ....
@JI8149 ай бұрын
This video was a lifesaver! Thank you.
@Taylormayd0210 ай бұрын
This video was extremely helpful. Better than all the others on YT. I had been searching for full video. Thanks guys!!!!
@petterblack645911 ай бұрын
I like your video because you explain well and you show how remove the line thank you for the video
@anthonyriche552 Жыл бұрын
Thanks so much for this and you're right- there aren't too many people on KZread demonstrating this process. You are much appreciated for making this video!
@joeysibande4621 Жыл бұрын
Thank you
@bobpratt56252 жыл бұрын
helped me thanks
@homeroperez78343 жыл бұрын
Como se llama la pieza q de cambio
@francisjpk3 жыл бұрын
refuerzo/soporte de manija de puerta, o en ingles door handle reinforcement
@melissalove72103 жыл бұрын
3 of 4 doors will not open from inside or outside. Child locks are on on both back doors, how do I get doors open to fix handles without destroying external door or skin on the inside?
@JulioTijuana013 жыл бұрын
Hello guys , as much as I appreciate and thank you for this video, as it will become handy for me as I fix a similar problem on my car; I must make this observation for anybody watching this video: avoid as much as possible putting parts or tools on the hood, or trunk lid, nor use them as work surfaces. Always protect the car's paint from scratches while working. I used to work with my dad at his mechanic shop and that was rule number two (rule number one was "If your hands are in your pockets that means you got nothing to do, so go sweep the floor young man") Thanks again and keep up the good work.
@adamperkins26953 жыл бұрын
Are the o rings the same for the 6.9idi?
@planetmoving91803 жыл бұрын
6.9 idi used a same kind of injection. I think the rings are made the same. I got mine at Napa
@juansantana83083 жыл бұрын
i have a fsuper duty{350}7.3 diesel with the same problem question does the fuel line on top of the injectors use o ring my email [email protected]
@bigdreamsonsmallacres4 жыл бұрын
Thank you so much for this. I've owned a few 7.3 powerstrokes but this is my first IDI. Couldn't for the life of me figure out where fuel was leaking from and I think this is it. Same symptoms I was having. I gave a like, comment, and subscribed!
@joeysibande4621 Жыл бұрын
Same here man I have been experiencing the same symptoms with my truck it will run fine as long as it’s warm but if I let it sit for three hours or something like that I lose my fuel feed and it is a nightmare to get started
@alvinballou4 жыл бұрын
Definitely going to help me out when i do this later on today
@robertdavis31095 жыл бұрын
Are the gas struts mounted upside down? Might want to check..
@TheStruggleville5 жыл бұрын
$169.99 coupon - struggleville.net/01-185/
@TheStruggleville5 жыл бұрын
Hey Bud, they have a coupon for $169.99 on that cart. You can bring in your receipt and show them the coupon within 14 days and get a price adjustment. I'll link it in a separate comment in case it gets spammed.
@myersfamily60595 жыл бұрын
Thank for letting me know guys i will look in to that about the coupon and look the struts thank you both for commenting on this I like for you both like And subscribe if you already have it and thank you very much
@CrazedForLife135 жыл бұрын
Hey man! Just going to give a helpful hint as you're starting out. Vertical videos are not very KZread friendly, so before you start recording, turn your phone sideways. It's a small change that will really up the quality of your videos. The occasional blurring is just your phones auto focus. most cameras you buy also have this feature, so the best way around that is to get a small tripod and a static setup rather than you holding the camera. Since I've taken some film and photography classes (including editing) I would love to help you out and answer any questions. Keep up the good work!
Пікірлер
Don’t look, Ethel! Too late. She’s already been mooned. But this is helpful since I have to undertake this project. I’m not looking forward to the puzzle.
Thank you very much your video help me alot i was ready go crazy could not find anything on KZread tell yours ....
This video was a lifesaver! Thank you.
This video was extremely helpful. Better than all the others on YT. I had been searching for full video. Thanks guys!!!!
I like your video because you explain well and you show how remove the line thank you for the video
Thanks so much for this and you're right- there aren't too many people on KZread demonstrating this process. You are much appreciated for making this video!
Thank you
helped me thanks
Como se llama la pieza q de cambio
refuerzo/soporte de manija de puerta, o en ingles door handle reinforcement
3 of 4 doors will not open from inside or outside. Child locks are on on both back doors, how do I get doors open to fix handles without destroying external door or skin on the inside?
Hello guys , as much as I appreciate and thank you for this video, as it will become handy for me as I fix a similar problem on my car; I must make this observation for anybody watching this video: avoid as much as possible putting parts or tools on the hood, or trunk lid, nor use them as work surfaces. Always protect the car's paint from scratches while working. I used to work with my dad at his mechanic shop and that was rule number two (rule number one was "If your hands are in your pockets that means you got nothing to do, so go sweep the floor young man") Thanks again and keep up the good work.
Are the o rings the same for the 6.9idi?
6.9 idi used a same kind of injection. I think the rings are made the same. I got mine at Napa
i have a fsuper duty{350}7.3 diesel with the same problem question does the fuel line on top of the injectors use o ring my email [email protected]
Thank you so much for this. I've owned a few 7.3 powerstrokes but this is my first IDI. Couldn't for the life of me figure out where fuel was leaking from and I think this is it. Same symptoms I was having. I gave a like, comment, and subscribed!
Same here man I have been experiencing the same symptoms with my truck it will run fine as long as it’s warm but if I let it sit for three hours or something like that I lose my fuel feed and it is a nightmare to get started
Definitely going to help me out when i do this later on today
Are the gas struts mounted upside down? Might want to check..
$169.99 coupon - struggleville.net/01-185/
Hey Bud, they have a coupon for $169.99 on that cart. You can bring in your receipt and show them the coupon within 14 days and get a price adjustment. I'll link it in a separate comment in case it gets spammed.
Thank for letting me know guys i will look in to that about the coupon and look the struts thank you both for commenting on this I like for you both like And subscribe if you already have it and thank you very much
Hey man! Just going to give a helpful hint as you're starting out. Vertical videos are not very KZread friendly, so before you start recording, turn your phone sideways. It's a small change that will really up the quality of your videos. The occasional blurring is just your phones auto focus. most cameras you buy also have this feature, so the best way around that is to get a small tripod and a static setup rather than you holding the camera. Since I've taken some film and photography classes (including editing) I would love to help you out and answer any questions. Keep up the good work!