Le Hussard FPV looks like you have a really good tune on your 7 inch drone. I have the same frame and motors but doesn’t fly near as good. Is there someway you could send me a screenshot of your PID settings for it? I know it’s different for every drone but it will give me a base I can start off from. Thank you very much!
@lehussardfpv4 жыл бұрын
Hello Aaron. Sorry but i cant send you the PID's because both of my 7 inch are running a Helio Spring... and as you know there's no PId with helio spring... only Q filtering thrust... all my (yaw roll and pitch) are on 2600. Soon i'll try on the HL7 betaflight, then i'll send you my PID's 😉
@danyel39014 жыл бұрын
What was your best flight time on this battery or others.. Thanks
@lehussardfpv4 жыл бұрын
My best flight with 5s 1800mah, Hqprop 7x35x3 and smooth flying = 10-12 minutes With 4s 2300mah infinity 8min.
@danyel39015 жыл бұрын
Very nice.. What distance can you go with crossfire. Thanks for PIDs. I like your equipment.. Très beau vol
@lehussardfpv5 жыл бұрын
Thank u! I was max 1km away, with rhe TBS unify HV 800mw... but with low altitude... the rssi of the crossfire was alway at 99%! I'll try soon the new TBS unify pro 32HV 1000mW ;)
@-McFly-4 жыл бұрын
@@lehussardfpv why don't use 300 mw 1.2 ghz or 2.4 ghz ? these frequencies are very efficient in video !
@lehussardfpv4 жыл бұрын
Şükrü Korkmaz yes i know, but not so easy to integrate it in my fatsharks?
@-McFly-4 жыл бұрын
@@lehussardfpv the video receiver and its antenna to the flight glasses or you can connect to the flight screen. look this is my flight video kzread.info/dash/bejne/ip1klc-PXcKtk6w.html
@ColtonCampbell5 жыл бұрын
Great flying, turtle v2 seems to the light handle well! Any settings you changed on the turtle?
@lehussardfpv5 жыл бұрын
Thanks, Nothing changed, all stock settings!
@Bertoos85 жыл бұрын
Nicr footage! What camera do you use?
@lehussardfpv5 жыл бұрын
That's The beta 85x HD with the stock caddx turtle v2 cam ;)
@brokenprop24745 жыл бұрын
What battery?
@lehussardfpv5 жыл бұрын
4S.... 😇
@brokenprop24745 жыл бұрын
Le Hussard FPV meant mah, trying to find the weight sweet spot.
@lehussardfpv5 жыл бұрын
4s tattu long size 450mah
@NordicBlueRC5 жыл бұрын
Very cool build. I'm looking at building a 7" this summer and the HL7 caught my eye. Are you still flying this bird and you like the frame still? What kind of flight time you getting from that 2200mah battery?
@lehussardfpv5 жыл бұрын
Yes i always fly with it! Waiting for the sun to fly again. It is more rigid than my cham ti 7 LR. I can fly 10min with that 2200mah but with 7035x3 props and smooth flying... with agressive flight and big props like 7056 its 3mins!!!
@NordicBlueRC5 жыл бұрын
@@lehussardfpv thanks!
@kikifpv6425 жыл бұрын
Ah il est beau ce spot de vol... le parc est superbe avec tout ces arbres en fleurs 👍😊
@lehussardfpv5 жыл бұрын
Achète donc un cinewhoop et viens !
@kikifpv6425 жыл бұрын
@@lehussardfpv ça me tente bien 😊
@FlyingFun.5 жыл бұрын
Nice, I love mine ... Will be going places nice like this with it.
@lehussardfpv5 жыл бұрын
Next time i'll try the ND8 and ND16 filters
@81velly5 жыл бұрын
Nice. I might have to pick one up.
@lehussardfpv5 жыл бұрын
Yes its urgent!! 😉
@naviluminor5 жыл бұрын
Quel fantastique endroit, vous êtes bien chanceux !
@lehussardfpv5 жыл бұрын
Merci! Oui un bien bel endroit avec des arbres magnifiques.
@goldenval5 жыл бұрын
Super! Elle va nickel cette petite machine
@lehussardfpv5 жыл бұрын
Je l'aime trop ce 85x 😍
@guiguiDuSud5 жыл бұрын
Did you tune the PID ?
@lehussardfpv5 жыл бұрын
yes i used the 75x tuning video and lowered the P for 4s because of full throttle oscillations
@flighttherapybullisticfpv1335 жыл бұрын
Hahaha I think that biker was loving it first and then when you buzzed him he couldnt wait to get away lol Awesome flight man are you still flying on these motors? Also have you ever tried them on 4s?
@lehussardfpv5 жыл бұрын
No Dont worry he is a friend!! Yes im still running these motors i love them. I use them with 4s 2200mah infinity and 5s 1800 tattu.
@antoniolaso5 жыл бұрын
Stock PIDS and props???
@lehussardfpv5 жыл бұрын
Stock props, but tuned PID's (lowered the P because full throttle vibrations with 4s)
@antoniolaso5 жыл бұрын
Le Hussard FPV thanks!!!!
@antoniolaso5 жыл бұрын
Great!!! 👏👏👏
@kikifpv6425 жыл бұрын
Ca whoopss fort au chateau ...👍😊
@kikifpv6425 жыл бұрын
Ça hoop à donf dans les bois ... Cool👍
@brandonshepherd33175 жыл бұрын
Nice. What kind of flight times with those motors? Auw?
@lehussardfpv5 жыл бұрын
Flight time up to 12 min with 5s 1800mah and hqprop 7x3.5x3 and with smooth flight But it can reach only 3 mins with dalprop 7x5.6x3 and full throttle...!!
@middleagedbaldguy67745 жыл бұрын
Nice! Been screwing around with 7 inch for about 6 months and still battling vibes. Whats your secret?
@lehussardfpv5 жыл бұрын
Hi! To solve the vibrations issues, you have to balance your props precisely. Dont use 2 blades props, but 3 blades props (like HQprop 7x35x3). Check the tracking of your props too, they have to move exactly in the same plan.And to eliminate all vibrations, i use the stabilisation of the gopro hero 5 ;)
@flighttherapybullisticfpv1335 жыл бұрын
What size motors are you using? My first 7 inch was with 2306 motors and I had vibes no matter what.. you need a more stout motor with a bigger stator volume to spool up a large disk load like that... switch to some BBBHOBBY 2407's or some Avenger V2 2507's and itll be smooth as your 5 inch
@LgRc856 жыл бұрын
joli vol et belle vidéo, liked
@kikifpv6426 жыл бұрын
Cool ce vol en duo 👍
@kikifpv6426 жыл бұрын
cool le Time-lapses du début 👍
@kikifpv6426 жыл бұрын
Yessssss Nico c'est bon ça 👍
@yandachs67506 жыл бұрын
Subscribed😀
@lehussardfpv6 жыл бұрын
Yan Dachs thanks! :)
@kikifpv6426 жыл бұрын
yesss ...
@MrMathMovies6 жыл бұрын
Génial !
@kikifpv6426 жыл бұрын
Coolllll ...;)
@jojo-rw4ji6 жыл бұрын
Bonjour Ou ce trouve votre Club ?
@lehussardfpv6 жыл бұрын
jojo bonjour, en seine et marne
@jojo-rw4ji6 жыл бұрын
Le Hussard FPV Il est situé ou? Je recherche un club pas trop loin de chez moi
@lehussardfpv6 жыл бұрын
jojo grisy suisnes près de Coubert
@jojo-rw4ji6 жыл бұрын
Le Hussard FPV J'ai trouvé une adresse c bien sa?
@lehussardfpv6 жыл бұрын
jojo non non, rue du bois du parc, 77166 Grisy-Suisnes. Nous organisons un concours voltige si tu veux passer ce week end!
@stevensmith65256 жыл бұрын
Le Hussard, have you been able to test how well the R9M penetrates objects/buildings/trees?
@lehussardfpv6 жыл бұрын
Steven Smith hi, no i didnt test it more than this video... the module fried with a 3s external lipo. and thats the 2nd who burned with the external power... on the manual is written : external power: 4v-12,6v.....so enough with that, i’ve buyed the crossfire!!
@dmitriyp77015 жыл бұрын
@@lehussardfpv frsky says that you should be careful with a 3s lipo because it can be more than 12.6v. They give an advice use only 2s lipo dude :)
@lehussardfpv5 жыл бұрын
@@dmitriyp7701 you're right.... but since i leaved for Tbs Csrf ;)
@CharlesTLam6 жыл бұрын
ANY ideas why my aurora 90 has 2 second input delay on all channels.. I’ve flashed newest firmware on Rx and Q7 tx. But still get a delay so I can’ fly at all..I’ve asked many people and no one has ever seen this before...I’ve rebound many times, flashed with different firmware , I have non Eu on my TX...tried everything. Sometimes it’s longer than 2 seconds, sometimes 3. Secs or it loses signal completely even after arming ....so confused.
@lehussardfpv6 жыл бұрын
Charles Lamoureux sorry, but i never saw this issue...
@CharlesTLam6 жыл бұрын
No problem, no one else has seen it either ...I’m thinking likely bad receiver
@W113bm6 жыл бұрын
Hi, amazing flying. Is it ok to use matek fchub-6s with 40a esc? It says 4x30a on the pdb. so it happens that I have same escs and pdb like in your setup, but I was afraid to use 40a with this pdb. Thanks
@lehussardfpv6 жыл бұрын
Mitja Bort yes! Works fine with 40A Esc, and the XNova, i have no problems, this PDB is really strong enough !! Have nice flights!
@W113bm6 жыл бұрын
Le Hussard FPV Thank you
@moonbunny93227 жыл бұрын
I have to know...how did you get your mAh gage to read on the Aurora90? After all the research I did it seems the minicube omnibus F3 flight controller doesn't have a current sensor. Are you using a virtual sensor? If not how on earth did you get it to work. No matter what I do I can't get amps proportional to throttle and I would need a scaling factor of around 1800 to get it to read the correct current at idle. Any help would be much appreciated.... Ps...Loved your fonts! I haven't got a chance to check out the font editor yet. :) Mark
@philipdezso29307 жыл бұрын
What camera do you use?
@philipdezso29307 жыл бұрын
And what lipo and props? Thanks.
@lehussardfpv7 жыл бұрын
On these videos it was the hawkeye firefly q6 from banggood. Now i broke it and buyed the runcam3.
@lehussardfpv7 жыл бұрын
Lipos: Dinogy Graphene ultra v2.0 1300mah 80c and tattu race series 95C Props: Rcaerstar 5x4.8x3 and kingkong 5x4.5x3 ;)
@rotormandan26577 жыл бұрын
Could you explain more no how to do this? I experienced both glitches several times , the last one breaking my prop in the death roll to the ground. LOL.
@lehussardfpv7 жыл бұрын
I always have the roll of death with my aurora 90 and my aurora 100. But the "clean air " Mod from furious FPV solved the pitch up glitch and the excessive propwash. Here is the link for the mod: kzread.info/dash/bejne/k2V5r5KMp7mahco.html
@rotormandan26577 жыл бұрын
thank you very much sir, great flying by the way :)
Пікірлер
excellent, the thing with the bird looked like a dogfight 😁👍
🤣🤣🤣
nice flight :)
Thanx ;)
Superbe vidéo mon Nico
Merci à toi 👍
T'aurais quand même pu nous faire un passage à l'intérieur de ton nouveau carosse^^
Very nice flying amigo! Have you tried it (bh 2507 1850kv) on 6s?
hello I have the same frame as you but I just can't solve the vibrations on the shooting of the sessions 5. I tried them all ... any advice?
C'est sûr que là où tu vas il n y a pas besoin de route ( avec le drone.... Lol) Mes amitiés aux cerfs.
Yes 👍
Belle réalisation cette Delorean SUPERBE 👍
great flight and footage ! which gopro _? 5 6 7 8 _?
Şükrü Korkmaz thanks! Gopro session 5
@@lehussardfpv thanks...
That was cool
Peux-tu mettre un screnn betaflight de tes pid dans une vidéo s’il te plaît
Yes je te fais ça quand je le brancherai sur beta ;)
Merci :)
Epic flight. But I am curious to know the name of the track that plays in the back ground.
Eric Robinson Hi, thanks, the music is « in the house » , « in a heartbeat » (from 28 days later soundtrack)
This is the geprc Mark 4, 7 inch. What do you think for long range cruiser.. And if easy, to tune +
Loved this one, nice for cruising mid range, and easy to tune . Now i fly with the iFlight HL7.
@@lehussardfpv could you add specification for your HL7??
@@matismatis-jy2ny HL7, brotherhobby avenger 2507 1850kv, F4 flame AIO, esc metal F3 80A, runcam rotorriot 2, tbs unify pro hv, crossfire nano rx, battery tattu 5s 1800mah, props HQprop 7x35x3
Le Hussard FPV looks like you have a really good tune on your 7 inch drone. I have the same frame and motors but doesn’t fly near as good. Is there someway you could send me a screenshot of your PID settings for it? I know it’s different for every drone but it will give me a base I can start off from. Thank you very much!
Hello Aaron. Sorry but i cant send you the PID's because both of my 7 inch are running a Helio Spring... and as you know there's no PId with helio spring... only Q filtering thrust... all my (yaw roll and pitch) are on 2600. Soon i'll try on the HL7 betaflight, then i'll send you my PID's 😉
What was your best flight time on this battery or others.. Thanks
My best flight with 5s 1800mah, Hqprop 7x35x3 and smooth flying = 10-12 minutes With 4s 2300mah infinity 8min.
Very nice.. What distance can you go with crossfire. Thanks for PIDs. I like your equipment.. Très beau vol
Thank u! I was max 1km away, with rhe TBS unify HV 800mw... but with low altitude... the rssi of the crossfire was alway at 99%! I'll try soon the new TBS unify pro 32HV 1000mW ;)
@@lehussardfpv why don't use 300 mw 1.2 ghz or 2.4 ghz ? these frequencies are very efficient in video !
Şükrü Korkmaz yes i know, but not so easy to integrate it in my fatsharks?
@@lehussardfpv the video receiver and its antenna to the flight glasses or you can connect to the flight screen. look this is my flight video kzread.info/dash/bejne/ip1klc-PXcKtk6w.html
Great flying, turtle v2 seems to the light handle well! Any settings you changed on the turtle?
Thanks, Nothing changed, all stock settings!
Nicr footage! What camera do you use?
That's The beta 85x HD with the stock caddx turtle v2 cam ;)
What battery?
4S.... 😇
Le Hussard FPV meant mah, trying to find the weight sweet spot.
4s tattu long size 450mah
Very cool build. I'm looking at building a 7" this summer and the HL7 caught my eye. Are you still flying this bird and you like the frame still? What kind of flight time you getting from that 2200mah battery?
Yes i always fly with it! Waiting for the sun to fly again. It is more rigid than my cham ti 7 LR. I can fly 10min with that 2200mah but with 7035x3 props and smooth flying... with agressive flight and big props like 7056 its 3mins!!!
@@lehussardfpv thanks!
Ah il est beau ce spot de vol... le parc est superbe avec tout ces arbres en fleurs 👍😊
Achète donc un cinewhoop et viens !
@@lehussardfpv ça me tente bien 😊
Nice, I love mine ... Will be going places nice like this with it.
Next time i'll try the ND8 and ND16 filters
Nice. I might have to pick one up.
Yes its urgent!! 😉
Quel fantastique endroit, vous êtes bien chanceux !
Merci! Oui un bien bel endroit avec des arbres magnifiques.
Super! Elle va nickel cette petite machine
Je l'aime trop ce 85x 😍
Did you tune the PID ?
yes i used the 75x tuning video and lowered the P for 4s because of full throttle oscillations
Hahaha I think that biker was loving it first and then when you buzzed him he couldnt wait to get away lol Awesome flight man are you still flying on these motors? Also have you ever tried them on 4s?
No Dont worry he is a friend!! Yes im still running these motors i love them. I use them with 4s 2200mah infinity and 5s 1800 tattu.
Stock PIDS and props???
Stock props, but tuned PID's (lowered the P because full throttle vibrations with 4s)
Le Hussard FPV thanks!!!!
Great!!! 👏👏👏
Ca whoopss fort au chateau ...👍😊
Ça hoop à donf dans les bois ... Cool👍
Nice. What kind of flight times with those motors? Auw?
Flight time up to 12 min with 5s 1800mah and hqprop 7x3.5x3 and with smooth flight But it can reach only 3 mins with dalprop 7x5.6x3 and full throttle...!!
Nice! Been screwing around with 7 inch for about 6 months and still battling vibes. Whats your secret?
Hi! To solve the vibrations issues, you have to balance your props precisely. Dont use 2 blades props, but 3 blades props (like HQprop 7x35x3). Check the tracking of your props too, they have to move exactly in the same plan.And to eliminate all vibrations, i use the stabilisation of the gopro hero 5 ;)
What size motors are you using? My first 7 inch was with 2306 motors and I had vibes no matter what.. you need a more stout motor with a bigger stator volume to spool up a large disk load like that... switch to some BBBHOBBY 2407's or some Avenger V2 2507's and itll be smooth as your 5 inch
joli vol et belle vidéo, liked
Cool ce vol en duo 👍
cool le Time-lapses du début 👍
Yessssss Nico c'est bon ça 👍
Subscribed😀
Yan Dachs thanks! :)
yesss ...
Génial !
Coolllll ...;)
Bonjour Ou ce trouve votre Club ?
jojo bonjour, en seine et marne
Le Hussard FPV Il est situé ou? Je recherche un club pas trop loin de chez moi
jojo grisy suisnes près de Coubert
Le Hussard FPV J'ai trouvé une adresse c bien sa?
jojo non non, rue du bois du parc, 77166 Grisy-Suisnes. Nous organisons un concours voltige si tu veux passer ce week end!
Le Hussard, have you been able to test how well the R9M penetrates objects/buildings/trees?
Steven Smith hi, no i didnt test it more than this video... the module fried with a 3s external lipo. and thats the 2nd who burned with the external power... on the manual is written : external power: 4v-12,6v.....so enough with that, i’ve buyed the crossfire!!
@@lehussardfpv frsky says that you should be careful with a 3s lipo because it can be more than 12.6v. They give an advice use only 2s lipo dude :)
@@dmitriyp7701 you're right.... but since i leaved for Tbs Csrf ;)
ANY ideas why my aurora 90 has 2 second input delay on all channels.. I’ve flashed newest firmware on Rx and Q7 tx. But still get a delay so I can’ fly at all..I’ve asked many people and no one has ever seen this before...I’ve rebound many times, flashed with different firmware , I have non Eu on my TX...tried everything. Sometimes it’s longer than 2 seconds, sometimes 3. Secs or it loses signal completely even after arming ....so confused.
Charles Lamoureux sorry, but i never saw this issue...
No problem, no one else has seen it either ...I’m thinking likely bad receiver
Hi, amazing flying. Is it ok to use matek fchub-6s with 40a esc? It says 4x30a on the pdb. so it happens that I have same escs and pdb like in your setup, but I was afraid to use 40a with this pdb. Thanks
Mitja Bort yes! Works fine with 40A Esc, and the XNova, i have no problems, this PDB is really strong enough !! Have nice flights!
Le Hussard FPV Thank you
I have to know...how did you get your mAh gage to read on the Aurora90? After all the research I did it seems the minicube omnibus F3 flight controller doesn't have a current sensor. Are you using a virtual sensor? If not how on earth did you get it to work. No matter what I do I can't get amps proportional to throttle and I would need a scaling factor of around 1800 to get it to read the correct current at idle. Any help would be much appreciated.... Ps...Loved your fonts! I haven't got a chance to check out the font editor yet. :) Mark
What camera do you use?
And what lipo and props? Thanks.
On these videos it was the hawkeye firefly q6 from banggood. Now i broke it and buyed the runcam3.
Lipos: Dinogy Graphene ultra v2.0 1300mah 80c and tattu race series 95C Props: Rcaerstar 5x4.8x3 and kingkong 5x4.5x3 ;)
Could you explain more no how to do this? I experienced both glitches several times , the last one breaking my prop in the death roll to the ground. LOL.
I always have the roll of death with my aurora 90 and my aurora 100. But the "clean air " Mod from furious FPV solved the pitch up glitch and the excessive propwash. Here is the link for the mod: kzread.info/dash/bejne/k2V5r5KMp7mahco.html
thank you very much sir, great flying by the way :)
U're welcome, with pleasure! Have nice flights!
Aïe, aïe,aïe les pauvres hélices... ;)
Et PAF dans ta face les portes!! ;)