Do you by chance have a preset profile you can share for download? I cant get my slicer to slice at .04 without crashing. Thank you
@G15Movies21 сағат бұрын
I don´t understand why my Bambu Slicer is not showing the 27 Layers I have in HueForge. The Layerhight is adjusted to the same as in Hueforge...
@G15Movies20 сағат бұрын
Ok the Problem was that I rescaled the print in the Slicer. Bambu Slicer also reduced the thicknes of the print.
@Iam2lazy2register4 күн бұрын
honestly the naming is counter intuitive to me how about this: bright enhance --> shadow boost/clarity/detail dim--> "highlight clarity"
@hueforging2 күн бұрын
You are correct, I just haven't gotten around to changing them
@Iam2lazy2register2 күн бұрын
@@hueforging brilliant. I appreciate your dedication and creativity!
@MychCrowGames7 күн бұрын
Question! in the part where i need change the color filaments it says layer 20 but i only have 11...if u can help me? ty
@hueforging6 күн бұрын
I believe I already helped you. Your slicer was set to 0.2/0.2 layer heights and HueForge was set to 0.08/0.16.
@sprain088 күн бұрын
Please help, no matter what I do the amount of layers that slice on Bambu studio do not match the directions from HueForge. My max layer on Bambu Studio is 22 but Hueforge is saying do color swaps at layer #34
@hueforging6 күн бұрын
I suspect you either scaled in the slicer or have your layer heights set incorrectly.
@sprain086 күн бұрын
@@hueforgingI tried to copy all of the setting I could see in this video
@hueforging6 күн бұрын
Did you rescale your model in the Slicer? Please send me pictures of your entire HueForge window and your slicer with the layer heights settings visible to the email address on my contact page (not the form, above the form is an email address).
@samuellopca10 күн бұрын
What is the meaning of a coloraware filament? Can't you use your own filaments? I can't seem to get good results
@hueforging6 күн бұрын
This is just premade sets to give you an idea of how to set them up on the sliders. You may absolutely use any filaments you want. But the idea of stacking them Black, Color, White, Black, Color, White, Black, Color, White is what the sets really try to get across.
@KaliKavala10 күн бұрын
WOOOW, this is major. I have spend so much time trying to work out such photos. I am so happy to see this implemented. And all the small things that are "ease of life" are premium work. Great job, great job!
@hueforging6 күн бұрын
Really glad you are enjoying the updates!
@KaliKavala10 күн бұрын
Woaaaah Undo/Redo at last. Great :) I like most of the new features and think they are very nicely done
@MrRosiesman16 күн бұрын
How do I adjust the windows inside of the program
@hueforging15 күн бұрын
Drag them around. But there are limits on how much they can be adusted.
@MsLostboysforever18 күн бұрын
This is a good video and a great program, but why do I not have a left hand panel with colours on it, I have just installed 7.2 and that panel is not there?
@hueforging17 күн бұрын
Sounds like it accidentally got closed. If you go up to the Windows menu you should see Filaments as an option and it will be unchecked. Just check it again.
@MsLostboysforever17 күн бұрын
@@hueforgingThank you for the info, really great product, just learning it now, but I can already see the potential of this software 👍
@edwardrivera971321 күн бұрын
I bough the program but every time i send the file to bambu it wont give me the right amount of layers to change the colors. this is so frustrating.
@hueforging21 күн бұрын
Sounds like you have a mismatch between HueForge and Bambu Studio in terms of first layer and/or layer heights. Either that or you are rescaling in BambuStudio and changing the Z height and number of layers. I actually have a video on this. kzread.info/dash/bejne/qWypxquJhqaeYMo.html
@biboobz42721 күн бұрын
Hey mate your doing an amazing job ! Love hueforge so much. However, I have some issues with getting a correct result with some types of imagine...is there anyway I can share that with you ?
@Lebron3d23 күн бұрын
What software are you are using to do this color control
@hueforging22 күн бұрын
I'm using Affinity Photo 2 (which is currently on a 50% off Flash Sale)
@Lebron3d22 күн бұрын
@@hueforging Thank you so much.
@teleyeti24 күн бұрын
I made this box, but only had 12v LED strips laying around in my scrap box. I used these with a 9v power source, and this gave me TD's that were pretty close to filaments I had that are in the Hueforge library already. A bit early to say if this is a good idea but seems to be working out in a pinch.
@Lebron3d27 күн бұрын
I like the software, but it's so hard to get the settings right, and so many people use other software to manipulate the colors of the image before they use the hueforge if you are going to make a video please make it with how your really getting these great images out hueforge. Thank you.
@hueforging27 күн бұрын
I normally only do very basic adjustments if any. But the most recent video on Color Aware walks through one of the easier ways to adjust images.
@mattevans809029 күн бұрын
Thanks for this info, a lot to unpack in 4 minutes. Love this art you're teaching on, do you happen to know what style it would be considered?
@hueforging29 күн бұрын
It looks like the prompt was: full frame high contrast weathered wood and stone carving in high relief nature spirit emerging from the stone
@CGrecifulАй бұрын
Dude I was getting my life in order, getting my yardwork done, cleaning the house, then I started Hueforging every photo I've ever taken and I've been stuck on the couch ever since. "Thanks!" haha
@CGrecifulАй бұрын
that's a compliment somehow :-)
@hueforgingАй бұрын
Well maybe take some time from HueForge to make more memories to HueForge :)
@seangholland3055Ай бұрын
why since the update do i not see the left hand side picture of the print pre-view?
@hueforgingАй бұрын
If it did work in v0.7.1 and now it doesn't, probably Windows isn't properly associating your GPU with HueForge. If v0.7.0 worked and you never tried v0.7.1, I'm guessing you have an AMD GPU. If it's relatively modern, please update it's driver. If it is 11-14 years old, I think I know what the issue is, but I don't have a fix yet. It appears to be an incompatibility in their GL implementation.
@KenRossPhotographyАй бұрын
Super helpful to think of these as "bins" or "zones" that aren't necessarily tied to the RGB values. You could almost picture having a "bin 1", "bin 2", "bin 3" set of markers next to the gradient map and under the sliders to really drive the point home. Don't want 3 bins, turn off one of the RGB colors - it all kinda works 😁
@hueforgingАй бұрын
I hope to eventually let you arbitrarily define the bins to your hearts content. The number and the "color" of the bin. Right now you can turn off the RGB color but it doesn't actually turn off the bin, the bin still takes up some space. But yes, think off them more as bins than colors and you will open yourself to a lot of new ideas with how to use Color Aware.
@Leo-yh1ljАй бұрын
How many colors you need for this, and also how many color changes does this take? Would love to see a video how this is all done on a 3D printer.
@hueforgingАй бұрын
I used 7 unique colors. I could have made choices to reduce the number of colors somewhat, but probably only by 1. There were 13 swaps during this print. The Blue section : Black, Polymaker Starlight Neptune, Bambu Jade White The Red section : Black, Paramount 3D Iron Red, Polymaker Wine Red, Bambu Yellow, Bambu Jade White The Green Section: Black, Paramount 3D Iron Red, Bambu Lab Orange, Bambu Jade White, Bambu Yellow, Bambu Jade White The Black and White were the same throughout.
@MonkeyButlerLabsАй бұрын
Another great tutorial on how to use outside tools to make your HueForge dance to the tune you want. Thanks for this!
@ivank7570Ай бұрын
Nice example how to work with. Thank you.
@hueforgingАй бұрын
Glad it was helpful!
@ChivasKimberАй бұрын
Keeps getting better and better! Great purchase!
@hen3drikАй бұрын
Thank you. I love this software so much! Keep going!😊
@hueforgingАй бұрын
Thank you! I saw your rings this week, kind of wondered about a hybrid HueForge/ring model. Like the ring in the fire at Frodo's house.
@hen3drikАй бұрын
@@hueforging I’m already onto something with hueforge. Experimenting experimenting 😅 not sure if it‘ll work.
@hueforgingАй бұрын
@@hen3drik I'm excited to see what you come up with :) ! I'm sure it will be epic.
@SandyToesDetectingАй бұрын
I am finding this so confusing, I have a photo of a friends of ours, black couple, they are wearing bright clothing, I cannot get anywhere near a match of colour to real photo.
@user-ig9ix8wf8gАй бұрын
Hello HueForging, I'd like to know how to get TD values of other brands' filaments. Do you have any links for reference? Thank you!
@hueforgingАй бұрын
In the Tools folder is the Seashell Test with a PDF guide on how to read it.
@user-ig9ix8wf8gАй бұрын
Thanks a lot
@user-ig9ix8wf8gАй бұрын
@@hueforging I have read the instructions in the PDF and conducted tests, which turned out great! However, I have another question. Since the tests in the examples were conducted using black and white colors, can I simply replace white with other colors to test the TD values? For instance, black + orange or black + green?
@hueforgingАй бұрын
Yes, that is the expectation
@KenRossPhotographyАй бұрын
Super helpful - thanks! Really changed how I was looking at color aware - viewing it as three distinct ranges makes a lot of sense 😊
@MonkeyButlerLabsАй бұрын
This is going to be huge for people just getting into HueForge. Not only the detail on how color aware works but the external image work tips are a bonus in value almost equal to the original explanation. Thanks for this!
@vinokuax1097Ай бұрын
Im really very happy with this software, good job really that you make
@GliposyАй бұрын
Is it possible to implement a feature in HueForge that automatically selects the closest preselected filament colors to match the original image colors as closely as possible? I'm curious about the technical feasibility and any reasons it might not be included.
@hueforgingАй бұрын
Well you can already right click on an image and have it sort the filament to the closest match. So it's easy to find a Filament that matches the image. But what you are asking is extremely complicated due to 1) The number of available Filaments, 2) they all blend differently based on TD, often 3 or 4 colors deep. 3) Stacking order matters not just for blending but also for how coherent the resulting image and how easily it prints.
@GliposyАй бұрын
@@hueforging That makes sense. Thanks for replying
@grifftechАй бұрын
love this, thank you so much!!! Can't wait for Color Match also!!
@firsthope8196Ай бұрын
when is this version going to be available?
@hueforgingАй бұрын
I wanted it out yesterday, but found some late bugs and ran out of time to fix them. Should be today. But you don't need it to follow these instructions. 0.7.1 does all of the same things
@ThisisDDАй бұрын
Loved this! Learned a lot! Can't wait to get my TD1!
@ModitRCАй бұрын
Does repeating a color have any advantaged? Like black to white then black again?
@hueforgingАй бұрын
Yes it can. In color pop and color aware for certain but it can be useful in standard mode as well. A trivial example might be Black, White (to make gray) colors, then white again.
@bombsczech4338Ай бұрын
It would be nice to have TD library of filaments where filamens are always same or on filament brand file. Prusament has HUE of filaments on their page that is big help for hueforge. Or some algorythm that would find filaments with matching TD tests from more people. I háve question how hard was to made hueforge? Do you have somene or team or tou did it all its amazing. It was quite hard for me to understand this TD thing which files i need to do swatch in that box of yours in link from video ? I saw three videos on hueforge and somehow i understood TD from video where it was instructed like for idiots i hope im not only one. Its hard to imagine merging layers and how they make new colors.
@hueforgingАй бұрын
I'm not sure what you mean here. HueForge has a library of this but we cannot guarantee that vendors don't change formulas or maintain TD carefully
@RandomSmithАй бұрын
did you design this file with 1.6mm layer heights so that hueforge would allow you colour each layer and I guess since the layer height is 1.6 in stl - would you set the layer height in hueforge to 0.4 and that gives you more layers than the original stl step height 1.6mm, ie 4 hueforge layers per 1.6mm step in stl?
@hueforgingАй бұрын
I set it up with 0.16mm layers yes. But I just used 0.16mm layer heights in HueForge as well though if you wanted a finer color control at the expense of print time, you could also set it to 0.08mm if you wanted to in order to get intermediate blends.
@michaking3734Ай бұрын
A great feature would be if you could import a mesh, I tried a dart wing shape, had to scale the STL in slicer, that made everything worse
@hueforgingАй бұрын
You can import a mesh. But you can't drape an image over it. You should always scale on HueForge
@michaking3734Ай бұрын
@@hueforging it works thanks for the great work !
@joegonzalezlt71Ай бұрын
How did you make it to where you dont have a color tower?
@hueforgingАй бұрын
It's in the other settings. Turn off the purge tower
@kdschloemp2 ай бұрын
insted of pulling the filament you can right click like you did to set the filament color and add a pause
@Murexx2 ай бұрын
wie soll man das so genau drucken können , wenn ich die farben vom filament nicht besitze? es gibt ja nicht jede einzelne farbe bis ins detail , würde gerne es besser können ?
@hueforging2 ай бұрын
You can't make every color. But you can make a lot more colors than you have by blending them. I think people get too caught up in trying to make a perfect copy when making your own version is more satisfying and enjoyable.
@affliction91six2 ай бұрын
Great video! Being able to manually type in the number update for the color sliders by x+6 (example the first slider starts at 6 and being able to type 12) would be quicker than having to hit the up arrow 6 times. Just a thought!
@hueforging2 ай бұрын
Interesting idea, I have some other things up my sleeve that makes this a whole lot easier but that wasn't one I'd considered and I'll think on it for sure.
@Souldamnation132 ай бұрын
hey man, i absolutely love hueforge at the moment. but im having some issues that when i want a particular spot a certain color green, it also fills another spot green aswell eventhough its NOT green but because its the same shade of grey i suppose. would it be possible to have a tutorial to work around this or added more features that lets you color a certain area only? i dont know how this would be done. If i were to mark a certain area i get another set of sliders for that spot only? i dont know, im just a user. Would love to discuss this with further in private if you will.
@hueforging2 ай бұрын
You nailed this, the gray area is the same luminance. Since this is on the color pop video, I assume you are trying this in color pop mode? If that is the case, then I'm guessing your tolerance isn't high enough and you should slowly increase it until the gray turns gray and the green stays green.
@samgar73492 ай бұрын
so once I have sliced each individual file, how do i print them? usually with a normal hueforge on 1 file it will print fine, but i don't see how i can print 3 separate files together.
@hueforging2 ай бұрын
You print the files separately and glue them together afterwards. I do recommend several dry fittings before you commit to the ca glue or gloop
@J0shua0292 ай бұрын
I made the lifetime license purchase last month!!!! Thank you so much for your hard work and dedication to this community!!!! You can do some incredible stuff with this. My dad really likes ducks, it’s almost like an unhealthy obsession haha. I printed him the most amazing pintail drake hueforge on my A1 Mini. It’s the first hueforge I’ve actually done myself- I can definitely say it is going to be a while before I master this software but the possibilities are ENDLESS!!!!!!! I fell in love with hueforge the first time I saw one ❤
@ecruzpinto2 ай бұрын
I have resolved the issue using.08 and .16 initial layer. Thank you.
@hairlessjo47882 ай бұрын
Is it possible to have the border be a specific color? As opposed to the color of the top layer?
@hueforging2 ай бұрын
You can make it shorter to pick one of the other color layers or add a swap after the mesh is done
@CGreciful2 ай бұрын
This method no longer works in current version, correct? I imported my smaller pieces (i.e. eyes in the example) and Hueforge automatically changed the scale to make the "eyes" really big (fit to frame), ignoring the overall document/image size.
@hueforging2 ай бұрын
Did you crop the image to just the small pieces?
@CGreciful2 ай бұрын
No, just dragged image onto the right. It's an easy workaround. I added a border to the document when importing my inner image (forcing the background size not to auto crop), then used mesh boolean in the slicer to get rid of the border later. Who knows, maybe it's an artifact of the meta data, I'm using Inkscape for the pre-processing b/c it's what I'm familiar with. BTW, I'm making a prominence in color and the rest grayscale of my father's eclipse images! Rad.
@CGreciful2 ай бұрын
In the end I liked the results I got using the new color pop feature in HF. Also much easier to print off multiple copies...
@hueforging2 ай бұрын
@@CGreciful Ahh there might be an issue with SVG import not respecting Aspect Ratio
@theputnamto34682 ай бұрын
all i want to do is have an stl thats 2.35 mm, why is it so complicated, why cant you just have a box that says thickness, and then let me put in how thick i want the whole thing.
@hueforging2 ай бұрын
Because part of it needs to not be part of the blending or you will get really fragile prints.
@briant4442 ай бұрын
I request a modifications of the UI. I would like the dropdown menu for selecting presets, such as color aware, color pop etc, stays open when i select one of these. Now after i select one, the dropdown closes and if i want to see results of different ones i have go thru the procedure again and again. I know the filament library can be dragged out but that doesnt help. I want to be able to click on one after another to pick which one closest matches my expected outcome. Thank you.
@hueforging2 ай бұрын
This is not actually as useful as you think. Because you almost always need to adjust sliders etc to get that mode to look good, you can't just go into a new mode and have it auto adjust, so it wouldn't be a useful operation.
@briant4442 ай бұрын
@@hueforging well that gives you a new project to work, lol.
@Ryxxi_makes2 ай бұрын
wow amazing, will there be even more color stacking updates ?
Пікірлер
Do you by chance have a preset profile you can share for download? I cant get my slicer to slice at .04 without crashing. Thank you
I don´t understand why my Bambu Slicer is not showing the 27 Layers I have in HueForge. The Layerhight is adjusted to the same as in Hueforge...
Ok the Problem was that I rescaled the print in the Slicer. Bambu Slicer also reduced the thicknes of the print.
honestly the naming is counter intuitive to me how about this: bright enhance --> shadow boost/clarity/detail dim--> "highlight clarity"
You are correct, I just haven't gotten around to changing them
@@hueforging brilliant. I appreciate your dedication and creativity!
Question! in the part where i need change the color filaments it says layer 20 but i only have 11...if u can help me? ty
I believe I already helped you. Your slicer was set to 0.2/0.2 layer heights and HueForge was set to 0.08/0.16.
Please help, no matter what I do the amount of layers that slice on Bambu studio do not match the directions from HueForge. My max layer on Bambu Studio is 22 but Hueforge is saying do color swaps at layer #34
I suspect you either scaled in the slicer or have your layer heights set incorrectly.
@@hueforgingI tried to copy all of the setting I could see in this video
Did you rescale your model in the Slicer? Please send me pictures of your entire HueForge window and your slicer with the layer heights settings visible to the email address on my contact page (not the form, above the form is an email address).
What is the meaning of a coloraware filament? Can't you use your own filaments? I can't seem to get good results
This is just premade sets to give you an idea of how to set them up on the sliders. You may absolutely use any filaments you want. But the idea of stacking them Black, Color, White, Black, Color, White, Black, Color, White is what the sets really try to get across.
WOOOW, this is major. I have spend so much time trying to work out such photos. I am so happy to see this implemented. And all the small things that are "ease of life" are premium work. Great job, great job!
Really glad you are enjoying the updates!
Woaaaah Undo/Redo at last. Great :) I like most of the new features and think they are very nicely done
How do I adjust the windows inside of the program
Drag them around. But there are limits on how much they can be adusted.
This is a good video and a great program, but why do I not have a left hand panel with colours on it, I have just installed 7.2 and that panel is not there?
Sounds like it accidentally got closed. If you go up to the Windows menu you should see Filaments as an option and it will be unchecked. Just check it again.
@@hueforgingThank you for the info, really great product, just learning it now, but I can already see the potential of this software 👍
I bough the program but every time i send the file to bambu it wont give me the right amount of layers to change the colors. this is so frustrating.
Sounds like you have a mismatch between HueForge and Bambu Studio in terms of first layer and/or layer heights. Either that or you are rescaling in BambuStudio and changing the Z height and number of layers. I actually have a video on this. kzread.info/dash/bejne/qWypxquJhqaeYMo.html
Hey mate your doing an amazing job ! Love hueforge so much. However, I have some issues with getting a correct result with some types of imagine...is there anyway I can share that with you ?
What software are you are using to do this color control
I'm using Affinity Photo 2 (which is currently on a 50% off Flash Sale)
@@hueforging Thank you so much.
I made this box, but only had 12v LED strips laying around in my scrap box. I used these with a 9v power source, and this gave me TD's that were pretty close to filaments I had that are in the Hueforge library already. A bit early to say if this is a good idea but seems to be working out in a pinch.
I like the software, but it's so hard to get the settings right, and so many people use other software to manipulate the colors of the image before they use the hueforge if you are going to make a video please make it with how your really getting these great images out hueforge. Thank you.
I normally only do very basic adjustments if any. But the most recent video on Color Aware walks through one of the easier ways to adjust images.
Thanks for this info, a lot to unpack in 4 minutes. Love this art you're teaching on, do you happen to know what style it would be considered?
It looks like the prompt was: full frame high contrast weathered wood and stone carving in high relief nature spirit emerging from the stone
Dude I was getting my life in order, getting my yardwork done, cleaning the house, then I started Hueforging every photo I've ever taken and I've been stuck on the couch ever since. "Thanks!" haha
that's a compliment somehow :-)
Well maybe take some time from HueForge to make more memories to HueForge :)
why since the update do i not see the left hand side picture of the print pre-view?
If it did work in v0.7.1 and now it doesn't, probably Windows isn't properly associating your GPU with HueForge. If v0.7.0 worked and you never tried v0.7.1, I'm guessing you have an AMD GPU. If it's relatively modern, please update it's driver. If it is 11-14 years old, I think I know what the issue is, but I don't have a fix yet. It appears to be an incompatibility in their GL implementation.
Super helpful to think of these as "bins" or "zones" that aren't necessarily tied to the RGB values. You could almost picture having a "bin 1", "bin 2", "bin 3" set of markers next to the gradient map and under the sliders to really drive the point home. Don't want 3 bins, turn off one of the RGB colors - it all kinda works 😁
I hope to eventually let you arbitrarily define the bins to your hearts content. The number and the "color" of the bin. Right now you can turn off the RGB color but it doesn't actually turn off the bin, the bin still takes up some space. But yes, think off them more as bins than colors and you will open yourself to a lot of new ideas with how to use Color Aware.
How many colors you need for this, and also how many color changes does this take? Would love to see a video how this is all done on a 3D printer.
I used 7 unique colors. I could have made choices to reduce the number of colors somewhat, but probably only by 1. There were 13 swaps during this print. The Blue section : Black, Polymaker Starlight Neptune, Bambu Jade White The Red section : Black, Paramount 3D Iron Red, Polymaker Wine Red, Bambu Yellow, Bambu Jade White The Green Section: Black, Paramount 3D Iron Red, Bambu Lab Orange, Bambu Jade White, Bambu Yellow, Bambu Jade White The Black and White were the same throughout.
Another great tutorial on how to use outside tools to make your HueForge dance to the tune you want. Thanks for this!
Nice example how to work with. Thank you.
Glad it was helpful!
Keeps getting better and better! Great purchase!
Thank you. I love this software so much! Keep going!😊
Thank you! I saw your rings this week, kind of wondered about a hybrid HueForge/ring model. Like the ring in the fire at Frodo's house.
@@hueforging I’m already onto something with hueforge. Experimenting experimenting 😅 not sure if it‘ll work.
@@hen3drik I'm excited to see what you come up with :) ! I'm sure it will be epic.
I am finding this so confusing, I have a photo of a friends of ours, black couple, they are wearing bright clothing, I cannot get anywhere near a match of colour to real photo.
Hello HueForging, I'd like to know how to get TD values of other brands' filaments. Do you have any links for reference? Thank you!
In the Tools folder is the Seashell Test with a PDF guide on how to read it.
Thanks a lot
@@hueforging I have read the instructions in the PDF and conducted tests, which turned out great! However, I have another question. Since the tests in the examples were conducted using black and white colors, can I simply replace white with other colors to test the TD values? For instance, black + orange or black + green?
Yes, that is the expectation
Super helpful - thanks! Really changed how I was looking at color aware - viewing it as three distinct ranges makes a lot of sense 😊
This is going to be huge for people just getting into HueForge. Not only the detail on how color aware works but the external image work tips are a bonus in value almost equal to the original explanation. Thanks for this!
Im really very happy with this software, good job really that you make
Is it possible to implement a feature in HueForge that automatically selects the closest preselected filament colors to match the original image colors as closely as possible? I'm curious about the technical feasibility and any reasons it might not be included.
Well you can already right click on an image and have it sort the filament to the closest match. So it's easy to find a Filament that matches the image. But what you are asking is extremely complicated due to 1) The number of available Filaments, 2) they all blend differently based on TD, often 3 or 4 colors deep. 3) Stacking order matters not just for blending but also for how coherent the resulting image and how easily it prints.
@@hueforging That makes sense. Thanks for replying
love this, thank you so much!!! Can't wait for Color Match also!!
when is this version going to be available?
I wanted it out yesterday, but found some late bugs and ran out of time to fix them. Should be today. But you don't need it to follow these instructions. 0.7.1 does all of the same things
Loved this! Learned a lot! Can't wait to get my TD1!
Does repeating a color have any advantaged? Like black to white then black again?
Yes it can. In color pop and color aware for certain but it can be useful in standard mode as well. A trivial example might be Black, White (to make gray) colors, then white again.
It would be nice to have TD library of filaments where filamens are always same or on filament brand file. Prusament has HUE of filaments on their page that is big help for hueforge. Or some algorythm that would find filaments with matching TD tests from more people. I háve question how hard was to made hueforge? Do you have somene or team or tou did it all its amazing. It was quite hard for me to understand this TD thing which files i need to do swatch in that box of yours in link from video ? I saw three videos on hueforge and somehow i understood TD from video where it was instructed like for idiots i hope im not only one. Its hard to imagine merging layers and how they make new colors.
I'm not sure what you mean here. HueForge has a library of this but we cannot guarantee that vendors don't change formulas or maintain TD carefully
did you design this file with 1.6mm layer heights so that hueforge would allow you colour each layer and I guess since the layer height is 1.6 in stl - would you set the layer height in hueforge to 0.4 and that gives you more layers than the original stl step height 1.6mm, ie 4 hueforge layers per 1.6mm step in stl?
I set it up with 0.16mm layers yes. But I just used 0.16mm layer heights in HueForge as well though if you wanted a finer color control at the expense of print time, you could also set it to 0.08mm if you wanted to in order to get intermediate blends.
A great feature would be if you could import a mesh, I tried a dart wing shape, had to scale the STL in slicer, that made everything worse
You can import a mesh. But you can't drape an image over it. You should always scale on HueForge
@@hueforging it works thanks for the great work !
How did you make it to where you dont have a color tower?
It's in the other settings. Turn off the purge tower
insted of pulling the filament you can right click like you did to set the filament color and add a pause
wie soll man das so genau drucken können , wenn ich die farben vom filament nicht besitze? es gibt ja nicht jede einzelne farbe bis ins detail , würde gerne es besser können ?
You can't make every color. But you can make a lot more colors than you have by blending them. I think people get too caught up in trying to make a perfect copy when making your own version is more satisfying and enjoyable.
Great video! Being able to manually type in the number update for the color sliders by x+6 (example the first slider starts at 6 and being able to type 12) would be quicker than having to hit the up arrow 6 times. Just a thought!
Interesting idea, I have some other things up my sleeve that makes this a whole lot easier but that wasn't one I'd considered and I'll think on it for sure.
hey man, i absolutely love hueforge at the moment. but im having some issues that when i want a particular spot a certain color green, it also fills another spot green aswell eventhough its NOT green but because its the same shade of grey i suppose. would it be possible to have a tutorial to work around this or added more features that lets you color a certain area only? i dont know how this would be done. If i were to mark a certain area i get another set of sliders for that spot only? i dont know, im just a user. Would love to discuss this with further in private if you will.
You nailed this, the gray area is the same luminance. Since this is on the color pop video, I assume you are trying this in color pop mode? If that is the case, then I'm guessing your tolerance isn't high enough and you should slowly increase it until the gray turns gray and the green stays green.
so once I have sliced each individual file, how do i print them? usually with a normal hueforge on 1 file it will print fine, but i don't see how i can print 3 separate files together.
You print the files separately and glue them together afterwards. I do recommend several dry fittings before you commit to the ca glue or gloop
I made the lifetime license purchase last month!!!! Thank you so much for your hard work and dedication to this community!!!! You can do some incredible stuff with this. My dad really likes ducks, it’s almost like an unhealthy obsession haha. I printed him the most amazing pintail drake hueforge on my A1 Mini. It’s the first hueforge I’ve actually done myself- I can definitely say it is going to be a while before I master this software but the possibilities are ENDLESS!!!!!!! I fell in love with hueforge the first time I saw one ❤
I have resolved the issue using.08 and .16 initial layer. Thank you.
Is it possible to have the border be a specific color? As opposed to the color of the top layer?
You can make it shorter to pick one of the other color layers or add a swap after the mesh is done
This method no longer works in current version, correct? I imported my smaller pieces (i.e. eyes in the example) and Hueforge automatically changed the scale to make the "eyes" really big (fit to frame), ignoring the overall document/image size.
Did you crop the image to just the small pieces?
No, just dragged image onto the right. It's an easy workaround. I added a border to the document when importing my inner image (forcing the background size not to auto crop), then used mesh boolean in the slicer to get rid of the border later. Who knows, maybe it's an artifact of the meta data, I'm using Inkscape for the pre-processing b/c it's what I'm familiar with. BTW, I'm making a prominence in color and the rest grayscale of my father's eclipse images! Rad.
In the end I liked the results I got using the new color pop feature in HF. Also much easier to print off multiple copies...
@@CGreciful Ahh there might be an issue with SVG import not respecting Aspect Ratio
all i want to do is have an stl thats 2.35 mm, why is it so complicated, why cant you just have a box that says thickness, and then let me put in how thick i want the whole thing.
Because part of it needs to not be part of the blending or you will get really fragile prints.
I request a modifications of the UI. I would like the dropdown menu for selecting presets, such as color aware, color pop etc, stays open when i select one of these. Now after i select one, the dropdown closes and if i want to see results of different ones i have go thru the procedure again and again. I know the filament library can be dragged out but that doesnt help. I want to be able to click on one after another to pick which one closest matches my expected outcome. Thank you.
This is not actually as useful as you think. Because you almost always need to adjust sliders etc to get that mode to look good, you can't just go into a new mode and have it auto adjust, so it wouldn't be a useful operation.
@@hueforging well that gives you a new project to work, lol.
wow amazing, will there be even more color stacking updates ?
Yes. Color aware is three color groups stacked