Watching this video the night before I get thermal paste and hearing you say at 4:21 70°C meanwhile my laptop has been running at 95°C for months (it's 4 years old never opened up before untill last week)
@Humaam2958 күн бұрын
MSI laptop moment, can't really say anything else :p Really not sure what they were thinking while putting just one tiny fan in the laptop producing this much heat.
@markusdaffue57328 күн бұрын
@@Humaam295 but yeah this is the first time I'm working on a laptop so idk what fans other pc's have
@Humaam2958 күн бұрын
@@markusdaffue5732 Usually, laptops will have 2 fans that blow air through the back. For whatever reason, MSI just went with one fan for this model. PCs are a whole different story as you can choose different fans which are mounted in the case, and can be customized as per your needs. The CPU then has its own fan, and the same for the GPU. There are also different cooling methods (eg: liquid cooling) that you can use too.
@markusdaffue57328 күн бұрын
@@Humaam295 ahh my bad yeah no i don't have the model in the video it's the GF65 thin 9sexr just wanted to see the thermal paste method ^^
@markusdaffue57328 күн бұрын
Btw considering the temp is at 95°c and my games on the lowest setting possible freeze from time to time that's the thermal throttling right?
@Humaam29524 күн бұрын
makerworld.com/en/models/551496 www.printables.com/model/950590-controller-holder-under-desk-xbox-series-xs www.thingiverse.com/thing:6704761 Uploaded to Makerworld, Printables, and Thingiverse. Use whichever platform you prefer!
@SnaMProd25 күн бұрын
Bro, how did you mount the SSD to the plate without screws? Btw I received it with a cable that my friend told me it's to connect the ssd to pc, but yours was already in without anywhere attached. Nvm tho, I won't mess up with it tbf, but I might actually do, I will buy condensed air or however it's called, thermal paste etc so I can make it better after 4 years, oh yeah, hope I wont have problem unstucking CPU 😂 Edit: Nevermind I just realized I had some screws on a small bag, need to find them too 😂. I put the glassy cover and saw them, with the cable I told you etc. Clearly YT is my best friend to learn about systems, and about tools I ask my friend cuz it's his work.
@Humaam29525 күн бұрын
Sometimes, SSDs can come with (usually red/black) SATA cables, but usually these smaller PCs just have the cable attached to the motherboard from factory. For the SSD, I ended up just using some 3M double sided tape. For some reason mine didn't come with screws and I couldn't find spare ones in time :p Good luck with repasting your CPU! It can make quite a difference in thermals. Made a video repasting my laptop too.
@SnaMProd25 күн бұрын
@@Humaam295 oooh I see! Yeah, I got that wire and I have the very same PC as you show, or at least of its series. It came with 32gb ram, 2tb m.2, i7-9700kf and rtx 2080 ti. About motherboard i dont remember but tbf it really made me shocked to see that you coule put a 30XX series into this system. About thermal paste and stuff I'm scared tho, cuz unscrewing it's easy, but I'm fraid of forgetting what goes where 😂.
@SnaMProd25 күн бұрын
Need this for when the time comes to clean my pc... After 4 years of use 💀. Idk how to change thermal paste tho, I feel like it would have already become one big brick 😭, cuz I use it 24/7 🥹.
@jorgegallegos615127 күн бұрын
I have the 7th gen version what would be the best gpu and would tou recommend me to get a better power supply if i have the 240 one
@Humaam29525 күн бұрын
As long as the motherboard supports the GPU, and as long as you have the correct cables, you should be good to go for a drop in place GPU swap. The stock GPU in the 9th gen used about 120W TDP, while the 4060 that I installed had a listed TDP of 115W on the amazon page. As long as the GPU you are planning to buy has a TDP that is the same/lower than your current GPU, you should be good to go. If you don't know the TDP of your current card, try using a tool like GPU-Z to find out about your exact GPU model, then go from there. Hope this info helps!
@jorgegallegos615124 күн бұрын
@@Humaam295 thank you so much.
@Syrian-guyАй бұрын
What happens if I dont change the thermal paste? I only play for 2 hours per day with cooler boost on
@Syrian-guyАй бұрын
What happens if I dont change the thermal paste? I only play for 2 hours per day with cooler boost on
@Rangure0229 күн бұрын
Your temps?
@Syrian-guy28 күн бұрын
@@Rangure02 60-70
@Rangure0228 күн бұрын
@Syrian-guy You are fine
@Humaam29524 күн бұрын
You don't *have* to change the thermal paste, I just did it as mine was getting pretty hot. Seeing that your other comment says you get 60-70, that's actually a really good range to be in. You shouldn't have to repaste it any time soon :)
@Captiv8photographyАй бұрын
how was the typing experience with the mda? i'm thinking of doing the same
@Humaam29524 күн бұрын
Wasn't that bad honestly. Some keys were getting stuck but that could just be me smashing the keys. I'm planning on getting some XDA keycaps, will post a video about those if and when I do get them.
@nekozapАй бұрын
how is your laptop doing? i bought a msi gf63 11uc, it has been 11 months since, should i repaste?
@Humaam29524 күн бұрын
It's just fine, but I honestly cannot recommend MSI products to anyone. If you notice that your laptop is running hotter/throttling more, you could try repasting. Though, do some tests before opening it and repasting it, as it can be a pretty annoying process. Good luck!
@CompaRichyАй бұрын
I have the same setup running DCS AT HIGH while using VR and it runs perfectly fine (using windows 10 lite)
@Lavoste.CАй бұрын
whats the password when connecting to pc
@richarddiss16432 ай бұрын
👍🏾🙏🏾
@lilinh42962 ай бұрын
Hi there! Your video is great. My PC is trident 3 9si, it's drive me crazy today. The GPU is 1660ti, and I updated NVIDIA drives two days ago. Today my computer keeping black refresh, I can't do anything cuz it pause my work. Before it completely can't reboot, I tried reinstall drives, even old version drives, nothing helpful. I'm sure there is something wrong with my GPU or the drives. After watch your video, I'm thinking about would it fix the problem if I buy a new GPU. BTW have you met same problem as my before?
@Humaam2952 ай бұрын
Hey! First of all, thanks for taking the time to watch the video. If you have tried reinstalling the drivers, the GPU being damaged over time could be a potential issue. I haven't experience what you are having, but you might be better off getting a new GPU. Just make sure it has a good return policy before getting it :p
@migidid2 ай бұрын
do you have print bed adhesion issues with your SE?
@Humaam2952 ай бұрын
Honestly, not at all. It just pops off every single time off the bed. I tried using a glue stick and tape at first, but it worked the best without any of them. If it sticks too much for you, try using those options, and let it cool for about 5 minutes off the hot bed before flexing both sides. Should come right off.
@migidid2 ай бұрын
@@Humaam295 My issue is more of not sticking to the bed well. need to retry multiple times just to get the first layer done well. But after my message i contacted Creality and they sent me new print bed to see if it fixes it. bed is leveled. first i thought it was z offset and i kept fiddling with it but seems it just doesnt work 5/6 then works perfectly fine once. with same settings. i think creality print software is not working right the settings get overrided by the printer own settings and those were just set to max of exerything. not like on V2 printers. weird. im using octoprint server and have disabled power loss recovery.
@Autuz2 ай бұрын
silly funny guy
@Humaam2952 ай бұрын
www.thingiverse.com/thing:2933666/files
@Humaam2952 ай бұрын
www.thingiverse.com/thing:6138051
@krisprat2 ай бұрын
Hey I have trident 3 8th gen with 1060(6pin connector), thinking about upgrading to 4060 zotac solo. Is the power cable you used in the video from MB to GPU 6-8pin? any problems so far?
@Humaam2952 ай бұрын
Hey there! The PC has been working great since. Just make sure the TDP of your current GPU matches/is lower than the one you are planning on getting.
@Humaam2952 ай бұрын
I'm not sure why I'm not getting notifications for comments, only get them once every week. I'll try to keep up with questions and answer them as soon as I see them. Sorry for the late respones!
@eycso2 ай бұрын
Im gonna throw that pc through the window i swear, cant take the top left screw off. Its like literally impossible.
@Humaam2952 ай бұрын
Has the screw been stripped? See if you can use the rubber band method to get it off
@avalunch13 ай бұрын
Hello, may i know which bios version you were running? Can you share a link for that
@Humaam2952 ай бұрын
www.msi.com/Desktop/Trident-3-9th/support This is the link i used, it says version 950 but I've seen some other people talk about version 1.0 and 2.0 too. See if updating with this makes a difference.
@avalunch12 ай бұрын
@@Humaam295yeah i realized 8th didnt get bios updates like 9th, so i got 3060 instead sadly. Contacted msi support to and they didnt suggest using other bios updates not to brick the whole system
@Humaam2952 ай бұрын
@@avalunch1 Yeah, not sure what obsession MSI has releasing products then just killing it off like that. I had also contacted them and they said more or less the same thing
@averagejoe40573 ай бұрын
Did you have to get a 330 watt power supply for that 4060, or was the 240 watt enough ?
@Humaam2952 ай бұрын
Nope, in my case the GPU I got used less TDP somehow, so it was a simple plug and play for me
@jarrett963624 күн бұрын
@@Humaam295and urs came with the 230watt correct? Mine came with the 1650s that uses 100watts and I see this one is rated at 115watts so should be fine with my factory 230watt PSU right?
@Buds1x4 ай бұрын
can u list the graphics card used in this video im trying to upgrade my trident 3 but i dont want to buy the wrng 1 please n ty!
@bensan19904 ай бұрын
Not sure which one he used, but I recommend the RTX 3060 12GB Aero (make sure is an Aero, with 1 fan), 3060 Ti 8GB Aero as well and the 4060 8GB Solo.
Is it possible to install full size chery keycaps? I didn't know that. How do they fit? Do they press to the very bottom?
@Humaam29524 күн бұрын
Unfortunately full cherry keycaps will not work on any low profile switches. You can look into something like XVX or XDA. I am planning on trying out XDA keycaps, and I'll post a video if I get around to doing that.
@beh0lder014 ай бұрын
How did you manage the screws
@MacaroniMatt5 ай бұрын
What is your power supply. And how can I check and see if I got enough for a better gpu. I got a 1650 super
@Humaam2954 ай бұрын
I didn't change the PSU at all, just using the one that came with. Check the TDP rating of the GPU that you are buying. The 1650 that was in this PC had a TDP of 120W, while the 4060 that I installed had 115W. It's been used for about 4 months now with no issues at all.
@Aquarium3663 ай бұрын
@@Humaam295 1650 its 75 w and rtx 4060 115 w , its work with 230w ?
@mazik938029 күн бұрын
@@Aquarium366 The same question
@shuny11r235 ай бұрын
NIce!! Im thinking about Swapping the 3060 on mines for a 16gb 4060ti
@shuny11r233 ай бұрын
@@ramiad90 how it won't work? It's about the same size and not that much power drawn
@shuny11r233 ай бұрын
@ramiad90 that happened to me when I installed a 3060 to mines. After a few tries it randomly started working. So far been using mines for 2yrs now. So chance that is the same thing
@errolchrysantetan89055 ай бұрын
My MSI Thin GF63 Thin 9SC still freezes randomly even if idle. Even though I re-applied thermal paste for cpu and gpu using Kryonaut Thermal Grizzly, replaced the WI-FI card to Intel AX200, upgrade my RAM to 32GB, and what not. It seems that this freezing problem of mine is common with this model. :( I would not buy MSI laptops ever again.
@Humaam2954 ай бұрын
Honestly same, the QC over a lot of MSI products doesn't seem to reliable from what I've seen online. You could have received one of those ""faulty"" or slightly off products honestly. Hopefully you can resolve it with software updates :(
@hongjianwong13633 ай бұрын
HI I have the same computer as you. 9750+1650 max-q I have used it for three years and changed the thermal conductive paste twice(one is the thermal kryonaut last year just now change it to thermalright TH9 ) (ps some post already say the kryonaut was not the good choose thermal for laptop i think is correct because i open it the thermal already dry and showing out the die maybe i everyday open pc for playing ) . I haven't met you so far.I met BSOD twice last month because I updated the new OS version, but so far there is no problem. If your computer is still under warranty, it is recommended to go to the place where you bought it (although you have changed the thermal paste and damaged the sticker)
@captianmurlock19775 ай бұрын
Is the stock power supply enough to run that? ive read mixed reviews on upgrading
@Humaam2955 ай бұрын
It really varies from GPU to GPU, but the one that I used somehow had a TDP less than the stock one lol. Make sure to do your research before getting the parts though! The stock GPU in this model used about 120W TDP, while the 4060 that I installed had a listed TDP of 115W on the amazon page.
@aw37655 ай бұрын
Please someone help me. I just disassembled my gf63 to change its thermal paste. But after I assembled it won't turn on and the charging indicator lamp didn't turn on too. Can someone give me suggestions what's wrong with my gf63?
@Humaam2955 ай бұрын
Did you plug the AC adapter in after you closed up everything? Make sure to double check all the connectors as well, sometimes they aren't fully connected
@LeffyzАй бұрын
Have you disconnected the battery when repasting? If not then you are cooked my guy 💀
@badrbennani380125 күн бұрын
Did you find the solution ?
@MehTechyGuy5 ай бұрын
The GOAT is back.
@ApocalipxeRester5 ай бұрын
Thank you 😀
@EinSwitzer6 ай бұрын
4c difference from hotspot to edge of core if sanded
@EinSwitzer6 ай бұрын
NITR0 loves his MSi Thin Gf63 cyborG upgrade the ram and put heatsink gel on all the plastic package ic and power controllers let it get hot under its own power to pull in hell into itself using thermal direction and movement inside of things
@MehTechyGuy6 ай бұрын
Cool
@MehTechyGuy6 ай бұрын
If Humaam enters his villan arc it qill be a real problem
@gamingonly68806 ай бұрын
What percent alcohol you used
@deepanshu44176 ай бұрын
bro mara ko be ak ardino care banani ha mara pass sab kuch ha but code nahi ha pizz code da do bro
@hienha36466 ай бұрын
What size for case please
@ishaanaggarwal45016 ай бұрын
Tell someone
@sobeythomas63067 ай бұрын
I found the manual. I have it on my onedrive. I tried to post the link here but the message gets deleted. If anyone wants it or better knows how I can share it here, please suggest.
@daniloliwanagjr.59698 ай бұрын
Can i use this for gym workout? Are sweat resistance?
@drelan36068 ай бұрын
Nice vid man, where do you buy switches for this kb?
@drelan36067 ай бұрын
@amozebus-ym1tf nope, redragon uses a diferent type on this kb
@bradynauto8 ай бұрын
step:1 place both IQ budzs into their corresponding position inside the charging case step:2 after a few seconds, you will see onee bud flashing white quickly and the other flashing white once every 5 seconds. wait for the voice prompt "pairing" step:3 open the bluetooth connection list on your device and connect to "IQBUDZ08"
@rishanthrishu87258 ай бұрын
Hii please reply
@itsumairtech8 ай бұрын
Thank you for video. One question When did you get temp issues first time after using your laptop How many months
@riffgamerz51137 ай бұрын
U need to change minimum every 3 month if u use ur laptop for gaming all the time, and the maximum is 6 month
@abdelkarim13110 ай бұрын
How to Rest
@noaneal941910 ай бұрын
Nice! 😮
@sarahsherif188710 ай бұрын
Is it hot swap?
@Humaam29510 ай бұрын
Yep! It does use a specific pin layout however, so make sure to get those. Redragon has their own key pin style.
@Ruoja7111 ай бұрын
You really made me feel anxious by casually lying your heatsink on the motherboard and pressing on in with the paper towel :D By the way, let me ask you a question: is your case still getting hot to the touch in the heatsink area after the clean up? I have exact same model and last clean up was about a year ago now. I still get idle 49C and max stress arround 80-85C, but sometimes I can barely keep my fingers on the area between F keys and the display.
@Humaam2955 ай бұрын
KZread somehow didn't notify me for these comments :/ It was still pretty hot even after the thermal repasting, but at least it was bearable. It is a huge improvement from the factory, but I use an external keyboard anyways. (Also yeah I know i could and should have put the heatsink aside instead of on the mobo lol)
Пікірлер
Watching this video the night before I get thermal paste and hearing you say at 4:21 70°C meanwhile my laptop has been running at 95°C for months (it's 4 years old never opened up before untill last week)
MSI laptop moment, can't really say anything else :p Really not sure what they were thinking while putting just one tiny fan in the laptop producing this much heat.
@@Humaam295 but yeah this is the first time I'm working on a laptop so idk what fans other pc's have
@@markusdaffue5732 Usually, laptops will have 2 fans that blow air through the back. For whatever reason, MSI just went with one fan for this model. PCs are a whole different story as you can choose different fans which are mounted in the case, and can be customized as per your needs. The CPU then has its own fan, and the same for the GPU. There are also different cooling methods (eg: liquid cooling) that you can use too.
@@Humaam295 ahh my bad yeah no i don't have the model in the video it's the GF65 thin 9sexr just wanted to see the thermal paste method ^^
Btw considering the temp is at 95°c and my games on the lowest setting possible freeze from time to time that's the thermal throttling right?
makerworld.com/en/models/551496 www.printables.com/model/950590-controller-holder-under-desk-xbox-series-xs www.thingiverse.com/thing:6704761 Uploaded to Makerworld, Printables, and Thingiverse. Use whichever platform you prefer!
Bro, how did you mount the SSD to the plate without screws? Btw I received it with a cable that my friend told me it's to connect the ssd to pc, but yours was already in without anywhere attached. Nvm tho, I won't mess up with it tbf, but I might actually do, I will buy condensed air or however it's called, thermal paste etc so I can make it better after 4 years, oh yeah, hope I wont have problem unstucking CPU 😂 Edit: Nevermind I just realized I had some screws on a small bag, need to find them too 😂. I put the glassy cover and saw them, with the cable I told you etc. Clearly YT is my best friend to learn about systems, and about tools I ask my friend cuz it's his work.
Sometimes, SSDs can come with (usually red/black) SATA cables, but usually these smaller PCs just have the cable attached to the motherboard from factory. For the SSD, I ended up just using some 3M double sided tape. For some reason mine didn't come with screws and I couldn't find spare ones in time :p Good luck with repasting your CPU! It can make quite a difference in thermals. Made a video repasting my laptop too.
@@Humaam295 oooh I see! Yeah, I got that wire and I have the very same PC as you show, or at least of its series. It came with 32gb ram, 2tb m.2, i7-9700kf and rtx 2080 ti. About motherboard i dont remember but tbf it really made me shocked to see that you coule put a 30XX series into this system. About thermal paste and stuff I'm scared tho, cuz unscrewing it's easy, but I'm fraid of forgetting what goes where 😂.
Need this for when the time comes to clean my pc... After 4 years of use 💀. Idk how to change thermal paste tho, I feel like it would have already become one big brick 😭, cuz I use it 24/7 🥹.
I have the 7th gen version what would be the best gpu and would tou recommend me to get a better power supply if i have the 240 one
As long as the motherboard supports the GPU, and as long as you have the correct cables, you should be good to go for a drop in place GPU swap. The stock GPU in the 9th gen used about 120W TDP, while the 4060 that I installed had a listed TDP of 115W on the amazon page. As long as the GPU you are planning to buy has a TDP that is the same/lower than your current GPU, you should be good to go. If you don't know the TDP of your current card, try using a tool like GPU-Z to find out about your exact GPU model, then go from there. Hope this info helps!
@@Humaam295 thank you so much.
What happens if I dont change the thermal paste? I only play for 2 hours per day with cooler boost on
What happens if I dont change the thermal paste? I only play for 2 hours per day with cooler boost on
Your temps?
@@Rangure02 60-70
@Syrian-guy You are fine
You don't *have* to change the thermal paste, I just did it as mine was getting pretty hot. Seeing that your other comment says you get 60-70, that's actually a really good range to be in. You shouldn't have to repaste it any time soon :)
how was the typing experience with the mda? i'm thinking of doing the same
Wasn't that bad honestly. Some keys were getting stuck but that could just be me smashing the keys. I'm planning on getting some XDA keycaps, will post a video about those if and when I do get them.
how is your laptop doing? i bought a msi gf63 11uc, it has been 11 months since, should i repaste?
It's just fine, but I honestly cannot recommend MSI products to anyone. If you notice that your laptop is running hotter/throttling more, you could try repasting. Though, do some tests before opening it and repasting it, as it can be a pretty annoying process. Good luck!
I have the same setup running DCS AT HIGH while using VR and it runs perfectly fine (using windows 10 lite)
whats the password when connecting to pc
👍🏾🙏🏾
Hi there! Your video is great. My PC is trident 3 9si, it's drive me crazy today. The GPU is 1660ti, and I updated NVIDIA drives two days ago. Today my computer keeping black refresh, I can't do anything cuz it pause my work. Before it completely can't reboot, I tried reinstall drives, even old version drives, nothing helpful. I'm sure there is something wrong with my GPU or the drives. After watch your video, I'm thinking about would it fix the problem if I buy a new GPU. BTW have you met same problem as my before?
Hey! First of all, thanks for taking the time to watch the video. If you have tried reinstalling the drivers, the GPU being damaged over time could be a potential issue. I haven't experience what you are having, but you might be better off getting a new GPU. Just make sure it has a good return policy before getting it :p
do you have print bed adhesion issues with your SE?
Honestly, not at all. It just pops off every single time off the bed. I tried using a glue stick and tape at first, but it worked the best without any of them. If it sticks too much for you, try using those options, and let it cool for about 5 minutes off the hot bed before flexing both sides. Should come right off.
@@Humaam295 My issue is more of not sticking to the bed well. need to retry multiple times just to get the first layer done well. But after my message i contacted Creality and they sent me new print bed to see if it fixes it. bed is leveled. first i thought it was z offset and i kept fiddling with it but seems it just doesnt work 5/6 then works perfectly fine once. with same settings. i think creality print software is not working right the settings get overrided by the printer own settings and those were just set to max of exerything. not like on V2 printers. weird. im using octoprint server and have disabled power loss recovery.
silly funny guy
www.thingiverse.com/thing:2933666/files
www.thingiverse.com/thing:6138051
Hey I have trident 3 8th gen with 1060(6pin connector), thinking about upgrading to 4060 zotac solo. Is the power cable you used in the video from MB to GPU 6-8pin? any problems so far?
Hey there! The PC has been working great since. Just make sure the TDP of your current GPU matches/is lower than the one you are planning on getting.
I'm not sure why I'm not getting notifications for comments, only get them once every week. I'll try to keep up with questions and answer them as soon as I see them. Sorry for the late respones!
Im gonna throw that pc through the window i swear, cant take the top left screw off. Its like literally impossible.
Has the screw been stripped? See if you can use the rubber band method to get it off
Hello, may i know which bios version you were running? Can you share a link for that
www.msi.com/Desktop/Trident-3-9th/support This is the link i used, it says version 950 but I've seen some other people talk about version 1.0 and 2.0 too. See if updating with this makes a difference.
@@Humaam295yeah i realized 8th didnt get bios updates like 9th, so i got 3060 instead sadly. Contacted msi support to and they didnt suggest using other bios updates not to brick the whole system
@@avalunch1 Yeah, not sure what obsession MSI has releasing products then just killing it off like that. I had also contacted them and they said more or less the same thing
Did you have to get a 330 watt power supply for that 4060, or was the 240 watt enough ?
Nope, in my case the GPU I got used less TDP somehow, so it was a simple plug and play for me
@@Humaam295and urs came with the 230watt correct? Mine came with the 1650s that uses 100watts and I see this one is rated at 115watts so should be fine with my factory 230watt PSU right?
can u list the graphics card used in this video im trying to upgrade my trident 3 but i dont want to buy the wrng 1 please n ty!
Not sure which one he used, but I recommend the RTX 3060 12GB Aero (make sure is an Aero, with 1 fan), 3060 Ti 8GB Aero as well and the 4060 8GB Solo.
www.zotac.com/us/product/graphics_card/zotac-gaming-geforce-rtx-4060-8gb-solo
Is it possible to install full size chery keycaps? I didn't know that. How do they fit? Do they press to the very bottom?
Unfortunately full cherry keycaps will not work on any low profile switches. You can look into something like XVX or XDA. I am planning on trying out XDA keycaps, and I'll post a video if I get around to doing that.
How did you manage the screws
What is your power supply. And how can I check and see if I got enough for a better gpu. I got a 1650 super
I didn't change the PSU at all, just using the one that came with. Check the TDP rating of the GPU that you are buying. The 1650 that was in this PC had a TDP of 120W, while the 4060 that I installed had 115W. It's been used for about 4 months now with no issues at all.
@@Humaam295 1650 its 75 w and rtx 4060 115 w , its work with 230w ?
@@Aquarium366 The same question
NIce!! Im thinking about Swapping the 3060 on mines for a 16gb 4060ti
@@ramiad90 how it won't work? It's about the same size and not that much power drawn
@ramiad90 that happened to me when I installed a 3060 to mines. After a few tries it randomly started working. So far been using mines for 2yrs now. So chance that is the same thing
My MSI Thin GF63 Thin 9SC still freezes randomly even if idle. Even though I re-applied thermal paste for cpu and gpu using Kryonaut Thermal Grizzly, replaced the WI-FI card to Intel AX200, upgrade my RAM to 32GB, and what not. It seems that this freezing problem of mine is common with this model. :( I would not buy MSI laptops ever again.
Honestly same, the QC over a lot of MSI products doesn't seem to reliable from what I've seen online. You could have received one of those ""faulty"" or slightly off products honestly. Hopefully you can resolve it with software updates :(
HI I have the same computer as you. 9750+1650 max-q I have used it for three years and changed the thermal conductive paste twice(one is the thermal kryonaut last year just now change it to thermalright TH9 ) (ps some post already say the kryonaut was not the good choose thermal for laptop i think is correct because i open it the thermal already dry and showing out the die maybe i everyday open pc for playing ) . I haven't met you so far.I met BSOD twice last month because I updated the new OS version, but so far there is no problem. If your computer is still under warranty, it is recommended to go to the place where you bought it (although you have changed the thermal paste and damaged the sticker)
Is the stock power supply enough to run that? ive read mixed reviews on upgrading
It really varies from GPU to GPU, but the one that I used somehow had a TDP less than the stock one lol. Make sure to do your research before getting the parts though! The stock GPU in this model used about 120W TDP, while the 4060 that I installed had a listed TDP of 115W on the amazon page.
Please someone help me. I just disassembled my gf63 to change its thermal paste. But after I assembled it won't turn on and the charging indicator lamp didn't turn on too. Can someone give me suggestions what's wrong with my gf63?
Did you plug the AC adapter in after you closed up everything? Make sure to double check all the connectors as well, sometimes they aren't fully connected
Have you disconnected the battery when repasting? If not then you are cooked my guy 💀
Did you find the solution ?
The GOAT is back.
Thank you 😀
4c difference from hotspot to edge of core if sanded
NITR0 loves his MSi Thin Gf63 cyborG upgrade the ram and put heatsink gel on all the plastic package ic and power controllers let it get hot under its own power to pull in hell into itself using thermal direction and movement inside of things
Cool
If Humaam enters his villan arc it qill be a real problem
What percent alcohol you used
bro mara ko be ak ardino care banani ha mara pass sab kuch ha but code nahi ha pizz code da do bro
What size for case please
Tell someone
I found the manual. I have it on my onedrive. I tried to post the link here but the message gets deleted. If anyone wants it or better knows how I can share it here, please suggest.
Can i use this for gym workout? Are sweat resistance?
Nice vid man, where do you buy switches for this kb?
@amozebus-ym1tf nope, redragon uses a diferent type on this kb
step:1 place both IQ budzs into their corresponding position inside the charging case step:2 after a few seconds, you will see onee bud flashing white quickly and the other flashing white once every 5 seconds. wait for the voice prompt "pairing" step:3 open the bluetooth connection list on your device and connect to "IQBUDZ08"
Hii please reply
Thank you for video. One question When did you get temp issues first time after using your laptop How many months
U need to change minimum every 3 month if u use ur laptop for gaming all the time, and the maximum is 6 month
How to Rest
Nice! 😮
Is it hot swap?
Yep! It does use a specific pin layout however, so make sure to get those. Redragon has their own key pin style.
You really made me feel anxious by casually lying your heatsink on the motherboard and pressing on in with the paper towel :D By the way, let me ask you a question: is your case still getting hot to the touch in the heatsink area after the clean up? I have exact same model and last clean up was about a year ago now. I still get idle 49C and max stress arround 80-85C, but sometimes I can barely keep my fingers on the area between F keys and the display.
KZread somehow didn't notify me for these comments :/ It was still pretty hot even after the thermal repasting, but at least it was bearable. It is a huge improvement from the factory, but I use an external keyboard anyways. (Also yeah I know i could and should have put the heatsink aside instead of on the mobo lol)