Ill be trying this, my fiat randomly started this today of all days
@thilluminatin14 күн бұрын
Glad I saw your vid. Thought the headphones were broken 😂
@TiffanyMclean-nw1or11 күн бұрын
I will be trying this tomorrow fingers crossed 🤞
@skygardenАй бұрын
thanks very thorough & helpful. it's recommended to wait [a long time] before waxing new paint or clearcoat bit otherwise 👍
@vincentvalente78342 ай бұрын
Love Angus tattoo !
@Jackdaripper_102 ай бұрын
Are you able to do one for ps5? My right side of the headpiece is not working.
@robertfelix80512 ай бұрын
Thanks mate it help
@heretic1243 ай бұрын
I have three spots like this on my hood and one on passenger's door. Been to three auto paint "specialists" and all told me the whole part needs to be sprayed anew, like 600€ per part. Strip it off the old color and paint it again. And since the car is worth like three times the service they told me just to ignore it. All three of them. WTF? They didn't even try to scam me for new paintjob. I'm so fucking pissed right now. This is what? 40€ fix that I can do myself? I'd rather have specialist do it but it seems like I know more about it now then them? How is that possible?
@katemarriner74234 ай бұрын
Ur bloody awesome ty even my ford garage could not fix this, you bloody legend u ❤❤❤❤❤❤❤❤
@anthonyshaw74976 ай бұрын
Thankyou
@1joeymcgava8 ай бұрын
Are you sanding the entire area that the clear coat has chipped off? Or just edge of the chipping clear coat?
@dustinswatsons915010 ай бұрын
You know I hated every forum with fiat owners because they never talk about this stuff they're always talking about accessories and the fancy shat way2go some practical crap
@bartlett38510 ай бұрын
Absolutely fantastic video!! Thank you so much. I’m a 51 year old lady and I fixed my fiat on the side of the road, watching this video. Super grateful to you. Love your hat 😊
@TheFakhri2111 ай бұрын
Thank you
@BorrachoGames Жыл бұрын
Just in case anyone finds this helpful video like I did and needs the part numbers here they are... 46840510, 60669020, 60801906, or 1543231. I ordered Mopar 60669020 for my 2012 Fiat 500 TwinAir 900cc UK spec in Japan.
@hswp3276 Жыл бұрын
Solid video. Just changed this on my abarth. Seems to have solved it. Thanks
@peterdelamare Жыл бұрын
This was useful. Thanks.
@iancarr9794 Жыл бұрын
Does anyone no if this works on bravo t jet as no power steering and shows eps unavailable.
@levicarvalho4389 Жыл бұрын
bought one of these, it's garbage, can't event put into portrait orientation
@fatandhappykid Жыл бұрын
Well it is older technology now, there will be far more better ones now
@amirhaynes6016 Жыл бұрын
I just purchased an MK6 GTI, and the roof structure is peeling in the same spots as your car! I visualized myself doing this exact procedure and thought, "It can't be that simple." you, sir, have given me the confidence to pull the trigger.
@bettykwati133 Жыл бұрын
Thank you for this informative video. I have the exact same projector but mine is giving me issues with the picture quality. The picture colours make it seem like any video look like "cartoons" (for lack of a better word) and i can barely make out the image. Any advice?
@Jesus-in3oz Жыл бұрын
Have you fixed this issue?
@ryanchernochan9366 Жыл бұрын
I know this video is fairly old but it’s the first time I’ve watched it. Could you put a single coat of clear coat over the damaged part as the very first step, before sanding to simply protect the base paint when you start sanding? Would that have worked? To ensure you don’t scuff the base paint? Just wondering as I am going to attempt this on my own car and it’s a very similar situation…
@hayleydownes3392 Жыл бұрын
Did you get a reply? Have you attempted that?
@ryanchernochan9366 Жыл бұрын
@@hayleydownes3392 no and no. I’m waiting for the weather in my area to get warmer as I’ll have to do this outdoors. I’ve never seen anyone try what I was suggesting so I doubt there’s an answer to it…
@RebuildingScotland Жыл бұрын
I'm thinking this is the way to go too, as at least it will protect the colour coat. After all, the aim is to fill the area of missing lacquer with more lacquer! The sanding is to remove excess lacquer from the original ,so the final finish is all one level. Also, I'm going to try an airline around the edges of the peeling area, to remove nay loose material. It may work, but has to be better than trying anything mechanical to remove the already-peeled lacquer
@bloffs3352 Жыл бұрын
Cheers for the video mate. You just saved me so much guessing.
@subhashparmar1571 Жыл бұрын
Matharbord cahiye
@mertyildiz7769 Жыл бұрын
👌
@nicolaflora3947 Жыл бұрын
what is the name of the substituted piece?
@jimker3955 Жыл бұрын
Hello, I have one question: Does the engine check yellow light open because of the faulty asr/hill holder switch? I see that after you solve the problem and you ignite the car the engine check light turns off, but at the beggining of the video you don’t start the car, so you have on both lights(engine chech & asr lights).
@AndTodaysProjectIs Жыл бұрын
It looks good for this old of a car. Looked like there was a bit of orange peel left over at the end of the video? Would sanding with 2000 or something between clear coats make it even better?
@hughtube86 Жыл бұрын
Very helpful!! 🙌🏼
@megaruhe6296 Жыл бұрын
Yes. No music.
@stevieg7403 Жыл бұрын
I don’t suppose you have the part number for that cylinder?
@fatandhappykid Жыл бұрын
Will post in comments shortly:)
@hellaswaggy3786 Жыл бұрын
I did my 350z after watching this video, 2000 grit worked fine for me, it took longer ofc because finer grade but no worries about going to deep.
@andyvits1 Жыл бұрын
Thanks mate, my wife's car just threw up those warnings this morning. Great video, thanks for the help 👍
@crasto2760 Жыл бұрын
Toppppp sei stato grande
@ricardopaccionilaurino8098 Жыл бұрын
nice Tip, even our drive side be on left i will follow your steps - tks and regards
@christopheranichol9982 Жыл бұрын
Thanks this was very helpful, had the same problem with my Abarth 500.
@fatandhappykid Жыл бұрын
Awesome thank you so much for choosing my video to watch
@torahulj Жыл бұрын
Music too loud, can hardly hear the explanation.
@fatandhappykid Жыл бұрын
There is a version of this video on my channel with no background music :)
@petersavage1989 Жыл бұрын
Was the background music vital?
@fatandhappykid Жыл бұрын
Yes
@Tony95192 Жыл бұрын
Excellent video! May I ask the part number of the switch please?
@lefosman7239 Жыл бұрын
i cant see movies through usb stick?
@johnhite4211 Жыл бұрын
This gave my confidence to try myself. Can you share what brand of clear coat you used?
@ninadabro66332 жыл бұрын
👌🏾
@ninadabro66332 жыл бұрын
Thank you 😊 finally someone right here at home made more senses 👌🏾😊 definitely going to show this video to my husband.
@WhiteDieselShed2 жыл бұрын
Excellent a video that actually does what the video description shows. Keep that new pipe handy though, seems the join rusts badly and causes the pipe to leak. Dissimilar metals on the connectors.
@fatandhappykid2 жыл бұрын
Thanks and yes still have the new pipe on the parts shelve :)
@craigbmm46752 жыл бұрын
nice work .. looks really good .. about to do my Camry
@markahomer2 жыл бұрын
Before you replace the switch spray the end (which should pop out) with WD40 High Performance Silicone Lubricant. One fault is the switch sticks in the 'in position' so when the brake is applied it does not pop out setting off the dash warning. You can see this if you apply the brake. The end of the switch should be free moving.
@fatandhappykid2 жыл бұрын
Yeah the good old toolbox in a can 😀
@fatandhappykid2 жыл бұрын
The one in mine did need a replacement part but good to try ur idea 1st to see if it helps before looking into a replacement,
@markahomer2 жыл бұрын
@@fatandhappykid Worked for me. Hope it helps others.
@amybeth94829 ай бұрын
When you say spray the end. Which part do you mean? The white part? And do I spray all over ?
@bigdaddyproduction72662 жыл бұрын
I have ESC HILL HOLDER + TIRE PRESSURE + CONTROL ENGINE with abarth. I changed the brake contactor.... still have the problem. Brought it to Abarth 2 times. They never fixed the issue.
@majurbludd Жыл бұрын
Did you get it fixed? I swapped the brake switch and throttle body thus far. Next is the accelerator pedal itself. I also suspect the harness in the rear tailgate.
@amounce12 ай бұрын
My wife's 2018 abarth has just thrown up the exact same warning lights. Searching yt I found your comment. Did you get it fixed? And if so, what was the procedure etc. Many thanks in advance
@mgml2 жыл бұрын
Thanks. Now I know where it is.
@lynneversley3322 жыл бұрын
Thank you thank you thank you!!!! You are a lifesaver ❤️
Пікірлер
Ill be trying this, my fiat randomly started this today of all days
Glad I saw your vid. Thought the headphones were broken 😂
I will be trying this tomorrow fingers crossed 🤞
thanks very thorough & helpful. it's recommended to wait [a long time] before waxing new paint or clearcoat bit otherwise 👍
Love Angus tattoo !
Are you able to do one for ps5? My right side of the headpiece is not working.
Thanks mate it help
I have three spots like this on my hood and one on passenger's door. Been to three auto paint "specialists" and all told me the whole part needs to be sprayed anew, like 600€ per part. Strip it off the old color and paint it again. And since the car is worth like three times the service they told me just to ignore it. All three of them. WTF? They didn't even try to scam me for new paintjob. I'm so fucking pissed right now. This is what? 40€ fix that I can do myself? I'd rather have specialist do it but it seems like I know more about it now then them? How is that possible?
Ur bloody awesome ty even my ford garage could not fix this, you bloody legend u ❤❤❤❤❤❤❤❤
Thankyou
Are you sanding the entire area that the clear coat has chipped off? Or just edge of the chipping clear coat?
You know I hated every forum with fiat owners because they never talk about this stuff they're always talking about accessories and the fancy shat way2go some practical crap
Absolutely fantastic video!! Thank you so much. I’m a 51 year old lady and I fixed my fiat on the side of the road, watching this video. Super grateful to you. Love your hat 😊
Thank you
Just in case anyone finds this helpful video like I did and needs the part numbers here they are... 46840510, 60669020, 60801906, or 1543231. I ordered Mopar 60669020 for my 2012 Fiat 500 TwinAir 900cc UK spec in Japan.
Solid video. Just changed this on my abarth. Seems to have solved it. Thanks
This was useful. Thanks.
Does anyone no if this works on bravo t jet as no power steering and shows eps unavailable.
bought one of these, it's garbage, can't event put into portrait orientation
Well it is older technology now, there will be far more better ones now
I just purchased an MK6 GTI, and the roof structure is peeling in the same spots as your car! I visualized myself doing this exact procedure and thought, "It can't be that simple." you, sir, have given me the confidence to pull the trigger.
Thank you for this informative video. I have the exact same projector but mine is giving me issues with the picture quality. The picture colours make it seem like any video look like "cartoons" (for lack of a better word) and i can barely make out the image. Any advice?
Have you fixed this issue?
I know this video is fairly old but it’s the first time I’ve watched it. Could you put a single coat of clear coat over the damaged part as the very first step, before sanding to simply protect the base paint when you start sanding? Would that have worked? To ensure you don’t scuff the base paint? Just wondering as I am going to attempt this on my own car and it’s a very similar situation…
Did you get a reply? Have you attempted that?
@@hayleydownes3392 no and no. I’m waiting for the weather in my area to get warmer as I’ll have to do this outdoors. I’ve never seen anyone try what I was suggesting so I doubt there’s an answer to it…
I'm thinking this is the way to go too, as at least it will protect the colour coat. After all, the aim is to fill the area of missing lacquer with more lacquer! The sanding is to remove excess lacquer from the original ,so the final finish is all one level. Also, I'm going to try an airline around the edges of the peeling area, to remove nay loose material. It may work, but has to be better than trying anything mechanical to remove the already-peeled lacquer
Cheers for the video mate. You just saved me so much guessing.
Matharbord cahiye
👌
what is the name of the substituted piece?
Hello, I have one question: Does the engine check yellow light open because of the faulty asr/hill holder switch? I see that after you solve the problem and you ignite the car the engine check light turns off, but at the beggining of the video you don’t start the car, so you have on both lights(engine chech & asr lights).
It looks good for this old of a car. Looked like there was a bit of orange peel left over at the end of the video? Would sanding with 2000 or something between clear coats make it even better?
Very helpful!! 🙌🏼
Yes. No music.
I don’t suppose you have the part number for that cylinder?
Will post in comments shortly:)
I did my 350z after watching this video, 2000 grit worked fine for me, it took longer ofc because finer grade but no worries about going to deep.
Thanks mate, my wife's car just threw up those warnings this morning. Great video, thanks for the help 👍
Toppppp sei stato grande
nice Tip, even our drive side be on left i will follow your steps - tks and regards
Thanks this was very helpful, had the same problem with my Abarth 500.
Awesome thank you so much for choosing my video to watch
Music too loud, can hardly hear the explanation.
There is a version of this video on my channel with no background music :)
Was the background music vital?
Yes
Excellent video! May I ask the part number of the switch please?
i cant see movies through usb stick?
This gave my confidence to try myself. Can you share what brand of clear coat you used?
👌🏾
Thank you 😊 finally someone right here at home made more senses 👌🏾😊 definitely going to show this video to my husband.
Excellent a video that actually does what the video description shows. Keep that new pipe handy though, seems the join rusts badly and causes the pipe to leak. Dissimilar metals on the connectors.
Thanks and yes still have the new pipe on the parts shelve :)
nice work .. looks really good .. about to do my Camry
Before you replace the switch spray the end (which should pop out) with WD40 High Performance Silicone Lubricant. One fault is the switch sticks in the 'in position' so when the brake is applied it does not pop out setting off the dash warning. You can see this if you apply the brake. The end of the switch should be free moving.
Yeah the good old toolbox in a can 😀
The one in mine did need a replacement part but good to try ur idea 1st to see if it helps before looking into a replacement,
@@fatandhappykid Worked for me. Hope it helps others.
When you say spray the end. Which part do you mean? The white part? And do I spray all over ?
I have ESC HILL HOLDER + TIRE PRESSURE + CONTROL ENGINE with abarth. I changed the brake contactor.... still have the problem. Brought it to Abarth 2 times. They never fixed the issue.
Did you get it fixed? I swapped the brake switch and throttle body thus far. Next is the accelerator pedal itself. I also suspect the harness in the rear tailgate.
My wife's 2018 abarth has just thrown up the exact same warning lights. Searching yt I found your comment. Did you get it fixed? And if so, what was the procedure etc. Many thanks in advance
Thanks. Now I know where it is.
Thank you thank you thank you!!!! You are a lifesaver ❤️
Please say name of part and supply part number.
The break switch