Пікірлер

• 
  @maciejcegowski657Күн бұрын

  Congratulations!

• 
  @user-zx8de8op9lКүн бұрын

  Nice turntable, I have been using a SL-1200 since 1993

• 
  @michaklaarenbeek7966Күн бұрын

  Grest video, which Peek polishing product did you use?

• 
  @dexqce864Күн бұрын

  When I was Child in my hometown a lot of Vietnamese and there was 4 family my fathe give them lived with us the same house. There come the most tragic story that they told us about unlucky peoples in sea meet Thailand fishing boats and they looting them rape the beautiful women after they done Thailand fishing boats crash their boat and sinking them into sea. That was the most tragic story that US govt and US loyal dog Thailand govt never let their peoples and world know about Vietnam boat peoples. PS.Sorry for English

• 
  @ernestgutierrez41892 күн бұрын

  Whats the link to the holder you are using for the turntable? I am interested in getting something like this.

• 
  @acdcfan56724 күн бұрын

  I have the same radio but mine powers on by the volume knob. My blue dial background doesn’t work either, but has a white dial clear indicator. I am looking for information about the Buss fuse that sits behind the indicator in the metal housing inside to get the light to work again. Mine also says it’s a 35w radio, so yours is probably the same

• 
  @mattgrimaldi134 күн бұрын

  Nice. I need two black buttons for my pat5. Dynamo does not stock them. Any leads?

• 
  @navydiving3 күн бұрын

  @@mattgrimaldi13 I may have two. On vacation til 7 Aug. Will check when I get back. Email cldo9201 at gmail dot com

• 
  @pkojovic6 күн бұрын

  Hi, good video. Thank you. Can you please demistify is there option to adjust azimuth on TP60 and TP11 an 16 tonearms? I saw some claims that Thorens designed TP60 to change azimuth in way that with one hand holding headshell and with other armwand tube and then twist it (torsion movement) in order to make azimuth adjusted? I'm completely suspicious about this claims...

• 
  @navydiving5 күн бұрын

  @pkojovic which azimuth are you talking about? Short answer is you can sufficiently adjust azimuth in all three axes if need be...🤔 If you are talking about trying to keep the top of the headshell parallel with the record surface (which should be adjusted to be parallel to the floor) then yes I use a tiny spirit level on top and twist the headshell gently until the bubble shows level...

• 
  @asterixx68786 күн бұрын

  'Manfred Mann's Earth Band' is playing in the background. You obviously have a good taste for music.👍

• 
  @georgeprice42128 күн бұрын

  W2…..Columbia House pressing.

• 
  @jlcougilljr9 күн бұрын

  enjoyed the vid Tim! greetings from Indiana... and thank you for your service brother. \m/ \m/

• 
  @JHulbert179 күн бұрын

  What kind of speakers are those? Sounds great! Thanks for sharing

• 
  @navydiving9 күн бұрын

  @@JHulbert17 Boston Acoustics A100

• 
  @jens9n11 күн бұрын

  You end up buying this model?

• 
  @carlosoruna717417 күн бұрын

  Sold a few of those in the mid 70s.. Great amp..Total system 1 racks sold 2 amps 30 LOL raated at 100 watts per channel. They were very underated and outperformed 300 watt amps

• 
  @artSFCA20 күн бұрын

  Impressive!

• 
  @joemartin643921 күн бұрын

  Yuo have to let new bright dry then buff of the dark black off to start then wax

• 
  @joemartin643921 күн бұрын

  I have to remove the old face plate and get a new black metal face on my TD-160 and a rosewood armboard for my TD-160. Use contact cement

• 
  @buddafingahz905723 күн бұрын

  Thanks for posting this video. I picked up one of these at the thrift store a couple weeks ago and thought I checked all functions but alas, I missed the malfunctioning left deck, just like yours. I took a quick peek inside and yep, I could see the gear was missing a couple teeth. Thanks so much for posting the link to the gear part. I ordered 2 just in case. It arrived today and it took me about 3 hours to replace. It’s my first time attempting any audio repairs. I used to be into cars but that was many years ago. Anyways, after I got it all back together and tested it, it would play for a while and then stop. I was desperate at that point and just kept rewinding, fast forwarding and playing in both directions. Eventually it came around and now seems to be working perfectly Thanks again for posting your vid, I wouldn’t have been able to do it without your help. I feel pretty good about saving this deck.

• 
  @randyscott338623 күн бұрын

  That goes to the shitter , that goes out from the shitter , that goes into the shitter that goes outa the shitter , I don't have any idea what that is , that doesn't go to the shitter or out'ta the shitter . Well ! Do you wan'na buy it ?

• 
  @navydiving23 күн бұрын

  @@randyscott3386 had a 3288 after this video. This was merely one we looked at early on. We now have a 1996 3988

• 
  @laurakissmann344323 күн бұрын

  Just loved this - and yes, wiping the tears

• 
  @nghitran890226 күн бұрын

  Tàu tôi bị hư máy trôi 4 ngày trên biển thì gặp tàu đánh cá Malaysia kéo vào hoang đảo.chúng tôi phải ăn lá cây để sinh tồn

• 
  @navydiving26 күн бұрын

  How to sync two jbl partybox 110

• 
  @Vinylfromtheunderground26 күн бұрын

  What stabilizer clamp will fit this model that I can buy on Amazon? The spindle is fat and found that very few fit this

• 
  @navydiving25 күн бұрын

  @Vinylfromtheunderground I have several from Amazon and they all fit. I am not a big fan of them on sprung tables. If you do plan to use one regularly you will need to retunebyour springs which is not an easy chore...

• 
  @Vinylfromtheunderground25 күн бұрын

  I was hoping you had a clamp recommendation that fits the TD165. Clamps have no extra weight

• 
  @navydiving24 күн бұрын

  @Vinylfromtheunderground Sorry, I simply don't really use such frivolous things. It seems to me a weightless clamp would kinda defy the laws of physics...🤔🤣

• 
  @Luckiestmanalive-bb1mi26 күн бұрын

  Good work! I think the volume control is an old carbon-based pot that would be better treated with Deoxit faber-lube than D5, which can be too aggressive. Also, I find it easier to fit the annoying slider and spring and hold it there with your finger as you fit it back into the case. The dreaded cracked main gear is a common fault on the DD models but can also plague the WM-02, it seems.

• 
  @Luckiestmanalive-bb1mi26 күн бұрын

  I agree with you - I think this unit has not been opened before. The original belt can become soft so that playing it stretches it to a point where it falls off one of the wheels but the other wheels keep going - stretching it until it gets so large it eventually falls off.

• 
  @ericgonzales854Ай бұрын

  Did it sell?

• 
  @navydivingАй бұрын

  @ericgonzales854 not yet. Using it in my garage system in the meantime.

• 
  @ericgonzales854Ай бұрын

  @@navydiving how much for the set?

• 
  @SpiritgummАй бұрын

  Any suggestion for a back insert for compact 3-cd jewel cases? The tray has a hub for a disc so they aren't designed to accommodate one. I can only think you'd have to cut out a circular center to fit around the hub, and the disc sits on the insert.

• 
  @mikele5756Ай бұрын

  Well done. That was really interesting.

• 
  @artSFCAАй бұрын

  How did you connect the tape deck to the receiver?

• 
  @sourceonepaintingАй бұрын

  Hello Tim. I hope you get this comment. This video is two years old. I watched all nine episodes and took notes. I am and always been a stereo guy. I have modern gear. During covid, i discovered vintage, and I am hooked. I set up a little electronic work shop in my garage and have been learning how to restore old receivers and the like. I do own a SX950 I bought last year. I think the 950 is a little advaved for me, so I rescued some old Radio Shack gear to restore. Thank you again for such a good series of videos on the SX 950. Tom Sacramento California

• 
  @Kersten1966Ай бұрын

  I put of the pully and a spring comes out, the spring is inside the plastic part. Why? Ist where any adjustment of the brass part on top?

• 
  @MusicSashoАй бұрын

  How this compares with the PAT 3 tube preamp?

• 
  @navydivingАй бұрын

  I am not a fan of tube amps. That is just my opinion though. Feel free to form your own opinion...

• 
  @MRTWINTURBO88Ай бұрын

  Awesome video!!! Loved it!

• 
  @westeagle00Ай бұрын

  Thanks for imparting your knowledge of these great turntables for posterity!

• 
  @nickn5870Ай бұрын

  It looks good ! And 40w/channel hard to beat. Great.

• 
  @anx46Ай бұрын

  thanks man, big help

• 
  @kenanguliyev1947Ай бұрын

  @navydiving Good evening! I want to purchase this device. I would like to know your opinion as a real owner of this device.

• 
  @navydivingАй бұрын

  It is a good turntable but I would get a better cart for it. I didn't keep it long though. Got a good deal on a Thorens turntable shortly afterwards and sold this one.

• 
  @keng33282 ай бұрын

  Good old Rustyguts

• 
  @hiu71952 ай бұрын

  Freedom

• 
  @garycotz5632 ай бұрын

  THIS is what I've been looking for... the S100 operation... THANKS

• 
  @navydiving2 ай бұрын

  I really need to do an update video to this because the remote control does indeed hame a helm indicator on it similar to the one below. After playing with it a number of times while underway, I discovered the menu to display the helm position. It work real good so I am now very happy. Next time I go out I will film an update. Cheers. Tim

• 
  @radiofan24542 ай бұрын

  What 3D printer do you use?

• 
  @navydiving2 ай бұрын

  Voxelab Aquila and/or Monoprice IIIP Select Mini

• 
  @radiofan24542 ай бұрын

  @@navydiving Thanks! I have printed the headshell with and without the bullet. I first tried printing using a 0.4mm nozzle with various layer heights on a Creality K1, and while the prints turned out okay, I wasn't overly pleased with the results due to spacing gaps. I ended up switching to a Creality Ender 3 Pro with a 0.2mm and printed at a 0.12mm layer height and the print turned out considerably better. I'm going to next try a 0.08mm layer height to see if that is better yet. The only downside to the Ender 3 Pro with the 0.2mm nozzle is it takes A LOT LONGER to print; however, it's worth the wait for the finer detail. I'm Going to try and find a 3D printable bullet to see how it works out. It would be nice to have a 100% 3D printed solution. Thanks!

• 
  @obtugtxivtub2 ай бұрын

  WOW sounds good even through my phone speakers.

• 
  @wesmoore16822 ай бұрын

  Something like this could be caused by failure of solder to penetrate the coating on the board. I've had new factory assembled items that were doa. Then I found the failed connection. It looked ok. But no contenunity between solder spot and trace on board.

• 
  @Hoaang-nt5qh2 ай бұрын

  Nạn nhân của ông thiên đường xã hội chủ nghĩa. Do bố Nga xô. Và bố tàu cộng chống lưng.

• 
  @OMAIRAMARTINEZ-lu1cr2 ай бұрын

  I need teamplate thanks

• 
  @navydiving2 ай бұрын

  And where would I send this?

• 
  @patrickchavez88332 ай бұрын

  @@navydiving Please add a link to the description, this is a very good tutorial and many people would benefit from having a link to access this file.

• 
  @NateTurnage2 ай бұрын

  Thanks to your previous videos, I’ve become a big fan of all the Dynaco gear. I just finished a full upgrade in an ST-120, and I have two PAT-4s that I’m upgrading, one with their full complement of replacement boards, and one that’ll have the phono upgrade and keep the original, but upgraded, line stage boards. Keep up the great videos. 👍

• 
  @davesanders43812 ай бұрын

  I just got through re-caping my LX-3. I did not find any of the removed capacitors to be defective or out of tolerance. However, the two in the Record Level Circuit (C130 & C230) were 820pf and not 680pf as the schematic shows. Was there a service bulletin which changed this values?

• 
  @Sonic_Specialties_LLC2 ай бұрын

  Shut those dang dogs 🐕 up 😂😂

• 
  @Sonic_Specialties_LLC2 ай бұрын

  Polish the cover for the win!

• 
  @navydiving2 ай бұрын

  Or DIY a new one like I did in this next video (you should have checked all my videos). 😉🤣 kzread.info/dash/bejne/dZVstNBwddG1daw.htmlsi=l8F7nH35BSUiaG8T

• 
  @cuonghoang-uk2ne2 ай бұрын

  On route to a special assignment in South China Sea.