Custom made RC boat trailers by ALL WATER RC CUSTOM BOAT TRAILERS, INC. ~ New Orleans, Louisiana - USA
All boat trailers are all hand made by yours truly using high grade 1/8th inch aluminum, stainless steel screws, and real hardwood runners that are covered with marine grade outdoor carpet for realism. Trailers can be painted or pin stripped, and can also have LED lighting and other accessories pre-installed for additional fees. I highly recommend that you do all of your own mods to your liking or you will be stuck with what is agreed on during the course of the commission. All sales are final once payment is made!!! A full deposit is required for all builds as I do not offer easy pay scheduled payments or financing. Thanks!!!
Пікірлер
Be better without the gay music everyone uses.made me stop watching
Nice, but the music is overused when it comes to heli vids.
Looks beautiful. I wonder how many you sold?
None. I usually keep them if I buy or build them.
Nice 😊 flight ✈️
Cool run video. So, just curious, are these Hotrods ideal for some side by side drag racing run fun? And, if so, what's their approximate top speed out of the box? Also, what all hop up's did you add to it? Have a link for the motor sound add-on? Did you do any spur gear revisions? Thank you for your time. Stay safe!
they can be roeal fun and definitely used as drag racers. 2s stck speed was roughly low 30's.graded will be 50+ mph on the 3s setup and faster 75mph+ with spur gear upgrades
👍👍😎😎
Nice
Thanks
Nice man I got 75+ on mine
What setup are you using? ESC, Gears??? Sounds pretty fast.
@@maximumthrottlerc5939Castle 5700KV 3s motor. Castle SW4 ESC. I’m running Gence Ace 3s 4000mah 65c lipo, is the largest battery it can fit on 3s. Tamiya 93T Spur Gear ⚙️ an 36T pinion, my gear ratio is 2:5 to 1 revolutions
@@maximumthrottlerc5939because this is a Crazy setup on this car. To get to these speed territory, really gotta gradually ease in the power to top speed. Under right conditions wide open space and proper throttle management it top speed is 100+. But I have yet to master the skills to reach those numbers before catching air underneath chassis or spinning out and blowing tires
If you do run this setup I will suggest getting a second body for the car because believe me or not it will backflip at the slightest uneven surface or change in win direction at those speeds
Very nice ..really scale..i wish i knew how to fly a heilo most definitely on the list
very easy to learn with these. very stable in GPS mode
No good it will get overheat
Bad ESC from factory. They replaced the bad one with a good one and now everything works just fine. Props are good and good speeds
Hi have you done a maiden run ?
Yes. It runs great. Will be doing run videos soon. Keep an eye out for them!!!
@maximumthrottlerc5939 I did a maiden on mine with the scale seven outboard on it did not work rolled the boat over instantly
"PromoSM" 😪
2300kv * 14.80v = 34040 rpm's... that stock outrunner motor know how max rpm can make? Max i did on my older Recoil was 89kmh. On this new v2 max i did was 99kmh. But neither had stock eletrics! And was runing a doctor prop's on the first model...need to try on the 99kmh...but afraid to burn the esc's...ok just a couple of passes and see! :) thanks for the video!
Nice result. Now I'm thinking of an F-1, too
Always wanted to do a Tamiya F1 speed run car. Nice work
Thanks!!! Go for it!!! You'll thank me later 😉
Love the F1 car bro
Thanks 👍
Nice car and run👍
Thanks 👍
Nice! You dont see many of us around. I have many Tamiya F1s. Take it to the tennis courts and use joggers orange cones to make a course. kzread.info/dash/bejne/paBq1ZSSna-vabQ.html kzread.info/dash/bejne/m5irt5KeZJnahdI.html
I like the one with Ukrainian code arms.
All of my boats have Doctor Props propellers by Alex over in Ukraine. Best props you can ever buy 😉
Hello, thanks for the upload😊 So if I understand correctly, you Didnt install the strut offset? And I Wonder, any issues with strut and rudder inline?
Absolutely no issues and easier to turn in both directions
Sweet video bro 👍 I have a 3.3 stamped
very cool
❤🎉😮😊ไฟไฟไฟแอดพ์😊
Nice man. I have this same setup coming together soon. I got 56mph out of that motor with a 27t pinion in the current RC.
Nice 👍
hi guys. any heat problems with the esc or motor using a 4S batery ?
not at all
thanks ! does it still self rights with the 4S batery ? which is the size of the stock flexshaft ?
@@eduardonessim4499 it does self-righting with no issues. Temps were 110/115°F. Pretty sure you can find that information on the Horizon Hobby website.
@@maximumthrottlerc5939 thanks !
Looking forward to seeing it run I have one that I plan on using one motor and a gear box to drive counter rotating twin screw set up
Man I want this monster bad❤
They're really nice but need a few things done to them to make them run better
I should have taken Dramamine earlier. Good runner!
This was done with the older GoPro hero 3 which unfortunately did not have stabilization on board. You really do get the full effect lol 😆
@@maximumthrottlerc5939see😢🎉 3:31 3:31 3:31
Nice Apache but It would have been good to see the boat run instead of just seeing where it was going sorry
Nice I have one that has the decals installed but no running gear yet
Very cool
Sweet boat! Inlay looks fantastic
Thanks JP!!! I'm getting better at doing the inlays. It's definitely an art so-to-speak. The more you do the better you get. It's the one part in the whole process where you definitely do not want any outside distractions while you're working with it. Especially if you're using a fast drying mixture which I honestly do not recommend using. I prefer the long set because it gives you time to work with it, get all the bubbles out, and fix any uneven areas that you may visually notice during the sponging process.
I haven't tried to do a inlay yet. Guess I need to.
@@jaymeparker27 it's not that difficult and once you do a few you'll be able to do others and make a little extra on the side for the hobby 💰
Looks great, MHZ have some serious good looking hulls, I’m currently busy on a MHZ Chaparral 😊
Possibly my next one as well. Like the P1 style v's personally
@@maximumthrottlerc5939 Yes,their looks in fact amazing!However I appreciate cats,mono dragsters flat vees and hydroplanes as well ,but these time I was looking for a boat which is well drivable in rough water conditions since we had had a lot of wind these year and the other boats of my fleet aren’t good at rough water,lol
@@voneboy my reasons are exactly the same and I love all boats including the ones mentioned
Oh I "just Love the smell of Lipo power in the morning , smell like victory". great video thanks for sharing, looking forward to your next ones.
Thanks!!! Doing my best to juggle the channel and caring for my wife. She was recently diagnosed with advanced stages of incurable cancer and is at home in my care until further notice. I definitely appreciate the kind comments and assure you that there will be more videos coming. I'm actually in the middle of two projects but will be posting very soon.
Nice! Is this the df pathfinder 28?
Yes. I bought the empty hull from OSE
Why put the music, nobody wants to hear that crap.
Gopro Hero10 black is really awesome, I have same camera
Cool
TOP 👌 👌
Thank you my friend!!!
TOP MY FRIEND SHARE TO MY GROUPS FROM ITALY 😊
Okay 👌 thanks my friend
What part of this beautiful country are you running in?
Southern Louisiana USA without being too specific
Very Nice! What prop did u use? Whats the plan to get it to 60mph
custom made prop and it did 62.9mph using a 4s 2200 mAh 100c lipo
Not sure what size the prop was but if you message Alex @ Doctor Props he can make one for you. It's a custom made prop and he does not stamp numbers on any of his props. This one was a test model that he sent to me as a gift. I'm the USA distributor for Doctor Props USA and a good friend of his. Just tell him that Andrew sent you.
Try to send me a link for that I lite kit . Please and thank you for the review.
Motion RC sells them. They come in different sizes. This is the smallest one with 64mm ducted fan. I installed the extra LED lighting myself
nice setup......... im subscribed now
Thanks for both!!! Welsome aboard.
p̶r̶o̶m̶o̶s̶m̶
???
I've had mine at 52 lean it out like 3/4 out on hi side run a good race oil in it sharpen screw
Nice, better than what my Zelos performed, same prop and I can only get 37mph, I’m interested how you max performance of it.
I changed my oil to gas mix ratio to 16:1 mix, tuned the carb, and added the 6717- 3 blade prop made by Alex @ Doctor Props - Ukraine and only use high grade non-ethenol petroleum
Nice video mate, wish you had included a little bit of video showing inside the boat though! Maybe next time 👊
Lol .. Next weekend I actually planned to get Perry to dive into his setup and show everyone what it looks like. Can't always cover everything in one video... Especially when you also have boats sitting out. Makes for great follow up content 😉
@@maximumthrottlerc5939 I am just finishing my own hellcat build, it was a 2 stroke and has been converted to a single 12s setup and a full respray. Look forward to your next video
Did you start with a blackjack 24 for that boat or is it a custom made hull?
It's a ProBoat BJ24 hull
I know for a fact that concrete and rocks are very unforgiving on a fiberglass boat
They can be, but at the same time I also pay as close attention to my boat's direction of travel when operating them, so I am not too worried about the rocks or the concrete walls lol
Scale the persons? AliExpress?
American Diorama on Amazon
Какое озеро
це гарна розвага. Спасибі tse harna rozvaha. Spasybi
Nice Pond for boating where is it?
LaFraniere Park - Metairie, Louisiana
@@maximumthrottlerc5939 that's a long way from Northern California to go boating
@@vinniebuiltRC flat lands vs mountain view... I'd rather Cali 🤣
Wow....
Thanks for the WOW my friend!!! This adds an entirely new perspective to running your boat doesn't it? Waiting for the GoPro 10 to arrive for better stabilization of the video during high speed runs so stay tuned!
@@maximumthrottlerc5939 👌 🆗️.... share to my groups rc boat Facebook from italy please....
@@CARMELOGUARRASI can you send me a link? If you do - I will post it for you. Thanks!!!