Putting Philadelphia on the map for Rc fans. This is just the beginning. Hopefully I can bring the passion of RCs out of people in Philadelphia? I love this hobby!!! Rc4life
I don't think you can accurately compare the xmaxx to an outcast. xmaxx has a longer wheelbase and is not quite as wide as outcast. Off the top of my head I don't know what each has for a motor and esc, but you have to take that into consideration. I'm not knocking either. Xmaxx sits higher. And the xmaxx may run better on the new belted sledgehammers.
@wilber8637Күн бұрын
😇Brother, I am sorry to bother you...🥰Brother, I would like to ask if it is easy to find the parts of this Kagama and Sketer.??? 😅Because I plan to buy one of these two cars, Kagama or Sketer, on July 20th, but I am worried that I can't find their parts...Because you have more experience and are good at controlling the car, so I want to ask you...
@RacerRCКүн бұрын
Is that the long chassis or short
@MrMeDos2 күн бұрын
Losi racing makes a 2.0mm pinion for that motor. But dont even mess with 2.0mm shaft motors it will eventually break on you anyways, it happened to me with the correct pinion on the motor. come to castle creations with me lol..4400,5600,6350kv motors 1/8 bore plus they make sleeves to fit 5mm bore pinions with the.05 mod pitch.
@rcbeast1012 күн бұрын
Thanks. I should have watched your videos first. I saw your setup after, and it looks and runs great 👍.
@canal04.2 күн бұрын
🎉🎉😊
@Shreddylife2 күн бұрын
The pin snapped off because its a 2.0mm shaft motor and that pinion is a 2.3mm so it was off balance. That would explain why the gears where very loud also. I made the same mistake and ended up returning the 2.0mm setup for a 2.3mm and the gears are smooth as butter now.
@rcbeast1012 күн бұрын
Thanks for the info 👍.
@ShreddylifeКүн бұрын
@@rcbeast101 💯 🤙
@WuDidit4122 күн бұрын
Yo Philly that’s hard!!! MojaveLife. Thanks for sharing 💪🏿 Leggo
@baltimoreslonewolfmook3 күн бұрын
Baltimore in the building 🏚️ Nice vid🔥🔥
@rcbeast1013 күн бұрын
Thanks
@FrifjellDrivesRC3 күн бұрын
You used the stock pinion with a 2.3mm bore whereas you should have used a 2mm sized pinion. It happend to several other KZreadrs. Don’t you take a look what the others are doing?
@boduke94282 күн бұрын
Lol, Apparently not. I can see not a creator not watching other reviews before they make theirs so they aren't influenced. Heck, lack of time even more likely. Maybe if enough of these guys break the shaft making the same mistake it'll save more of us from doing it.
@FrifjellDrivesRC3 күн бұрын
😂 that battery and ESC. You made my day
@rcbeast1013 күн бұрын
Lol
@ryand47864 күн бұрын
Is the Outcast heavier ? Xmaxx is cool but they seem sluggish in any videos I’ve seen.
@rcbeast1013 күн бұрын
The Outcast is 40 pounds. X-Maxx is about 30 or less.
@wilber86374 күн бұрын
😍my dream car..❤
@wishiwasoff4 күн бұрын
Hey what size shocks did u use on ur big rock 3s I like ur big rock 3s looks great with that spoiler so I am ordering a spoiler for my big rock right now later
@rcbeast1014 күн бұрын
Team corally 6s shocks off my Dementor.
@Doug_Morgan5 күн бұрын
Nice video. I have a Xmaxx and a XRT. Both running stock electronics with 20/46 hardened gears. Having a blast with them but may also pick up either the 8s Outcast or Kraton.
@Wanderingpyro5 күн бұрын
That's one of the biggest ghettos I've ever seen
@wilber86375 күн бұрын
😮Waooo...😂brother take too much car brother think want to play how long time..😇have a good days..
@wilber86375 күн бұрын
😅I love rewatching your videos bro...this is the third time I've watched this video...I also love watching cars running in dusty areas and doing backflips...May God bless you
@jagergerg97715 күн бұрын
Both excellent monsters. I got both of the, Outcast is stock electronics 30/39. I do have M2C dog bones and thicker shock shafts. Xmaxx is Max5 1100 kv 25/35, I think it’s almost all M2C out. Best 1/5 scale out there
@rcbeast1015 күн бұрын
Awesome 👌.
@Hungrybird4745 күн бұрын
Yeah man , I ll be gettin one of these
@MrAmn20045 күн бұрын
Nice video as usual. That lambo body goes hard!
@rcbeast1015 күн бұрын
Thanks
@paulrakis5 күн бұрын
NICE MAN. Im thinking about getting the Mojave 4S. That super baja rey is sweet man. yes i love how the suspension works on all of them. they drive almost like a real car. how are things in philly bro. long time no talk
@rcbeast1015 күн бұрын
Pretty good 👍. The 4s Mojave is a beast. Get one. Thanks for watching.
@paulrakis4 күн бұрын
@rcbeast101 awesome man. Yeah of course. I'm probably gonna get on too whenever they go on sale hopefully.
@alantaylor3536 күн бұрын
Absolutely drop dead gorgeous.!!! 👍 👍 👍
@BeautyBeastRC6 күн бұрын
Looking clean af 💪🏾
@rcbeast1016 күн бұрын
Thanks
@sons-braddalton7 күн бұрын
Thank you!
@sparetimerc7 күн бұрын
They're both great 5th scale, I just don't like how the body is designed, I will say that the XMaxx is one tough truck but the gears aren't that great. Great run, awesome video.
@LondonzRC8 күн бұрын
Niceeee!
@Gixxer5158 күн бұрын
Great way to compare but damn that slipper clutch in the Mojave is a bit loose !
@matt_cars8 күн бұрын
Those method wheels are junk. I roasted a full set on 1 pack drifting around a bit and a few open throttle passes and they were done. Need to get some vipaz wheels.
@BeautyBeastRC6 күн бұрын
No grip is no fun tho, vipaz seem a little to extreme unless you just don't care about speed at all while bashing.
@LondonzRC9 күн бұрын
Looking nice, ima have to get that dodge off of you😂
@rcbeast1018 күн бұрын
Cool.
@magnusstone9 күн бұрын
Two best looking 6s street arrmas on yt
@louiesfixit9 күн бұрын
Yo, both of them kook crazy I'm loving the Lamborghini body. Wow great video bro
@rcbeast1019 күн бұрын
Thanks.
@itzjoeylo45019 күн бұрын
ARRMA beats Traxxas Every Time
@gamercat700410 күн бұрын
The trick to unclip the pins is to lift the curve upward end and slide😁
@donniemarks9410 күн бұрын
Love my Xmaxx now I want a kraton 8s or an XRT, still undecided
@Moggmodels2310 күн бұрын
Fantastic video Phil I love the Xmax but the arrma outcast exb 8s is got the top number 1 I think 🤔 Because we all think Xmax is not a good basher go for the arrma outcast 😊😊😅😅
@rcbeast10110 күн бұрын
Outcast is 👑
@ismaelmorales657310 күн бұрын
Great video from the comments from what I see I guess the RPM arms are two flexible in the heat... I think maybe you just need to have the screws to hold the pins in place that was going to be my next upgrade I'm just saying 💯💨🔥🔥💯🔋👍🏽
@rcbeast10110 күн бұрын
That will work.
@boduke942810 күн бұрын
M2C has a Mega Outcast kit!!! We can put the Max4 650kv 70125 Hobbywing in it just like the mega Kraton. I ordered the Mega Kraton yesterday and saw it. My Max 5 760 is basically undrivable on 12s as it is. Not sure how the Max 4 650 would be. I bought 2 Outcast rollers last year when they were on sale and I've had one still in the box waiting for something to do with it. Finally decided to use it for a Mega Kraton build and then I'll have the unused parts for my Outcast if needed.
@rcbeast10110 күн бұрын
Sounds good. Good luck 👍.
@sosdeathvalley11 күн бұрын
I like both but ARRMA for the win they have upgraded parts already on them
@UrbanLegendRC11 күн бұрын
Nice session bro I can’t wait until I get me outcast next month
@rcbeast10110 күн бұрын
Cool, I can't wait to see the video and hear your thoughts.
@jagergerg977111 күн бұрын
Xmaxx better basher, Outcast better handling.
@LondonzRC11 күн бұрын
nothing like a morning banger while eating breakfast
@rcbeast10110 күн бұрын
Thanks
@rctezluh4206911 күн бұрын
upvoted!!
@RcGraveyard11 күн бұрын
I have both trucks. Both have pros and cons. I highly recommend anyone interested in fifth scale cars to get both. That was some odd breaks for the Xmaxx. I typically have to avoid side landings and breaking axle cups. Other than that nothing else really breaks on mine. I did install the complete hinge pin kit though
@rcbeast10110 күн бұрын
The rpm arms are flexing way too much. And it's hot outside. Thanks for watching.
@Matthewjeter600311 күн бұрын
That Asuga is out the box Tough💯
@JJ-lu6mg11 күн бұрын
Both great trucks 🔥🔥🔥The XMaxx is obviously more durable, but the Outcast is better in every other department. I never run RPM arms in the summer even on my 6s Arrma’s.
@LondonzRC11 күн бұрын
I love me some shredder lol I got one I actually have a twin motor build of it.
@LondonzRC11 күн бұрын
I love it! I have been watching you for a while.
@rcbeast10111 күн бұрын
Thanks, I appreciate that .
@surfside7511 күн бұрын
Very nice video comparison. If i didnt already own 2 6s mojave I'd be all over the 4s. Trying to get some solid advice. The choice is between Kraton v1 6s $549 or the kraton 4s v2 with center diff. Help😅
@rcbeast10111 күн бұрын
Kraton 4s is a better choice.
@RandyandCyndi11 күн бұрын
Awesome burnout brother keep up the great content
@RC.PowerHouse.20712 күн бұрын
The Mojave all day. I have both, and I let my kids use my Slash(training mode, of course). Im pretty partial to my Mojave. Lol
@rcbeast10112 күн бұрын
The Mojave is one of my favorite rigs . The Maxx Slash has potential, but it needs work. Thanks for watching.
Пікірлер
I don't think you can accurately compare the xmaxx to an outcast. xmaxx has a longer wheelbase and is not quite as wide as outcast. Off the top of my head I don't know what each has for a motor and esc, but you have to take that into consideration. I'm not knocking either. Xmaxx sits higher. And the xmaxx may run better on the new belted sledgehammers.
😇Brother, I am sorry to bother you...🥰Brother, I would like to ask if it is easy to find the parts of this Kagama and Sketer.??? 😅Because I plan to buy one of these two cars, Kagama or Sketer, on July 20th, but I am worried that I can't find their parts...Because you have more experience and are good at controlling the car, so I want to ask you...
Is that the long chassis or short
Losi racing makes a 2.0mm pinion for that motor. But dont even mess with 2.0mm shaft motors it will eventually break on you anyways, it happened to me with the correct pinion on the motor. come to castle creations with me lol..4400,5600,6350kv motors 1/8 bore plus they make sleeves to fit 5mm bore pinions with the.05 mod pitch.
Thanks. I should have watched your videos first. I saw your setup after, and it looks and runs great 👍.
🎉🎉😊
The pin snapped off because its a 2.0mm shaft motor and that pinion is a 2.3mm so it was off balance. That would explain why the gears where very loud also. I made the same mistake and ended up returning the 2.0mm setup for a 2.3mm and the gears are smooth as butter now.
Thanks for the info 👍.
@@rcbeast101 💯 🤙
Yo Philly that’s hard!!! MojaveLife. Thanks for sharing 💪🏿 Leggo
Baltimore in the building 🏚️ Nice vid🔥🔥
Thanks
You used the stock pinion with a 2.3mm bore whereas you should have used a 2mm sized pinion. It happend to several other KZreadrs. Don’t you take a look what the others are doing?
Lol, Apparently not. I can see not a creator not watching other reviews before they make theirs so they aren't influenced. Heck, lack of time even more likely. Maybe if enough of these guys break the shaft making the same mistake it'll save more of us from doing it.
😂 that battery and ESC. You made my day
Lol
Is the Outcast heavier ? Xmaxx is cool but they seem sluggish in any videos I’ve seen.
The Outcast is 40 pounds. X-Maxx is about 30 or less.
😍my dream car..❤
Hey what size shocks did u use on ur big rock 3s I like ur big rock 3s looks great with that spoiler so I am ordering a spoiler for my big rock right now later
Team corally 6s shocks off my Dementor.
Nice video. I have a Xmaxx and a XRT. Both running stock electronics with 20/46 hardened gears. Having a blast with them but may also pick up either the 8s Outcast or Kraton.
That's one of the biggest ghettos I've ever seen
😮Waooo...😂brother take too much car brother think want to play how long time..😇have a good days..
😅I love rewatching your videos bro...this is the third time I've watched this video...I also love watching cars running in dusty areas and doing backflips...May God bless you
Both excellent monsters. I got both of the, Outcast is stock electronics 30/39. I do have M2C dog bones and thicker shock shafts. Xmaxx is Max5 1100 kv 25/35, I think it’s almost all M2C out. Best 1/5 scale out there
Awesome 👌.
Yeah man , I ll be gettin one of these
Nice video as usual. That lambo body goes hard!
Thanks
NICE MAN. Im thinking about getting the Mojave 4S. That super baja rey is sweet man. yes i love how the suspension works on all of them. they drive almost like a real car. how are things in philly bro. long time no talk
Pretty good 👍. The 4s Mojave is a beast. Get one. Thanks for watching.
@rcbeast101 awesome man. Yeah of course. I'm probably gonna get on too whenever they go on sale hopefully.
Absolutely drop dead gorgeous.!!! 👍 👍 👍
Looking clean af 💪🏾
Thanks
Thank you!
They're both great 5th scale, I just don't like how the body is designed, I will say that the XMaxx is one tough truck but the gears aren't that great. Great run, awesome video.
Niceeee!
Great way to compare but damn that slipper clutch in the Mojave is a bit loose !
Those method wheels are junk. I roasted a full set on 1 pack drifting around a bit and a few open throttle passes and they were done. Need to get some vipaz wheels.
No grip is no fun tho, vipaz seem a little to extreme unless you just don't care about speed at all while bashing.
Looking nice, ima have to get that dodge off of you😂
Cool.
Two best looking 6s street arrmas on yt
Yo, both of them kook crazy I'm loving the Lamborghini body. Wow great video bro
Thanks.
ARRMA beats Traxxas Every Time
The trick to unclip the pins is to lift the curve upward end and slide😁
Love my Xmaxx now I want a kraton 8s or an XRT, still undecided
Fantastic video Phil I love the Xmax but the arrma outcast exb 8s is got the top number 1 I think 🤔 Because we all think Xmax is not a good basher go for the arrma outcast 😊😊😅😅
Outcast is 👑
Great video from the comments from what I see I guess the RPM arms are two flexible in the heat... I think maybe you just need to have the screws to hold the pins in place that was going to be my next upgrade I'm just saying 💯💨🔥🔥💯🔋👍🏽
That will work.
M2C has a Mega Outcast kit!!! We can put the Max4 650kv 70125 Hobbywing in it just like the mega Kraton. I ordered the Mega Kraton yesterday and saw it. My Max 5 760 is basically undrivable on 12s as it is. Not sure how the Max 4 650 would be. I bought 2 Outcast rollers last year when they were on sale and I've had one still in the box waiting for something to do with it. Finally decided to use it for a Mega Kraton build and then I'll have the unused parts for my Outcast if needed.
Sounds good. Good luck 👍.
I like both but ARRMA for the win they have upgraded parts already on them
Nice session bro I can’t wait until I get me outcast next month
Cool, I can't wait to see the video and hear your thoughts.
Xmaxx better basher, Outcast better handling.
nothing like a morning banger while eating breakfast
Thanks
upvoted!!
I have both trucks. Both have pros and cons. I highly recommend anyone interested in fifth scale cars to get both. That was some odd breaks for the Xmaxx. I typically have to avoid side landings and breaking axle cups. Other than that nothing else really breaks on mine. I did install the complete hinge pin kit though
The rpm arms are flexing way too much. And it's hot outside. Thanks for watching.
That Asuga is out the box Tough💯
Both great trucks 🔥🔥🔥The XMaxx is obviously more durable, but the Outcast is better in every other department. I never run RPM arms in the summer even on my 6s Arrma’s.
I love me some shredder lol I got one I actually have a twin motor build of it.
I love it! I have been watching you for a while.
Thanks, I appreciate that .
Very nice video comparison. If i didnt already own 2 6s mojave I'd be all over the 4s. Trying to get some solid advice. The choice is between Kraton v1 6s $549 or the kraton 4s v2 with center diff. Help😅
Kraton 4s is a better choice.
Awesome burnout brother keep up the great content
The Mojave all day. I have both, and I let my kids use my Slash(training mode, of course). Im pretty partial to my Mojave. Lol
The Mojave is one of my favorite rigs . The Maxx Slash has potential, but it needs work. Thanks for watching.