Good video FYI your product link to Amazon is to a GoPro not the O rings.
@PupupTorrao8 күн бұрын
Harbor freight has the open end sockets so you can remove the nut at the top of shock and use the Alan wrench thru the top of socket to keep it from spinning
@kadenbourgeois115 күн бұрын
Is this one specifically made for e46 or 36?
@Rightfootdown15 күн бұрын
This over was specific for the E46! I haven't seen it appear back on eBay since I bought it
@mohameddattebayo7602Ай бұрын
كيف يمكنني التواصل معا الاخ حسين
@jahblessin3996Ай бұрын
Great video I’m thinking of picking up a 996 or 997 wish I had a Chris to look at my car
@DRIFT_CORE2 ай бұрын
Spoiler alert
@mikelutts70882 ай бұрын
Just did mine… pretty easy BuT that bottom bolt is a B! Still have a little whinny noise though.. not sure what’s up… filled the fluid and still there when I accelerate…
@Rightfootdown15 күн бұрын
Glad you got it done!
@familyandwhatnot61852 ай бұрын
Where's the link
@Rightfootdown15 күн бұрын
Sadly they no longer make them!
@dockins2 ай бұрын
Thanks!
@mikeygifford2 ай бұрын
Not feasable to get 460hp out of this engine without racing gas or some special type of fuel
@VegasRey3 ай бұрын
Some moron was driving recklessly and knocked my entire driver side mirror off Thank you for this video!
@Rightfootdown15 күн бұрын
Glad it helped!
@slick_flawlessbikerz3 ай бұрын
Well I messed up and didn't get about half these features on my 2010 535i 😅
@beauhendricks75273 ай бұрын
Just bought a 2011 civic SI with 123k miles
@user-dn8fp7ol5z4 ай бұрын
A thin layer film of Honda power steering fluid should have been applied to those o ring gaskets before final tightening oh well its so easy and cheap to replace them if they leak again it's not that big a loss but I'm sure they will eventually leak again sooner than later since they were installed without putting on a thin film of power steering fluid upon final installation
@kylefillmore19124 ай бұрын
Would it fit on a sedan?
@obesekid69474 ай бұрын
Hey man i have potentially a really stupid question, but.. im gonna ask anyway. I love the look of the wing but im not really a fan of the bottom part thats sticking out beyond the trunk of the car. Is it possible to remove that bottom half and take just the top part of the wing and install it?
@JaneDodds-ce7hr4 ай бұрын
My OEM mirror replacement didn’t have the round black piece either. Great video!
@dopeydocc40165 ай бұрын
Mine doesn’t whine, but has a small leak. Would I assume it’s the O-rings or a whole new pump? I was quoted $1000 to replace the pump.
@LifeOfATLS3 ай бұрын
Might be too late but that’s insane bro don’t do that. Try and do the o rings first. I wasted time and money buying a new pump and it didn’t fix shitttt
@dopeydocc40163 ай бұрын
@@LifeOfATLS not to late! I haven’t had money to really do anything yet lol so thank you! I will make sure to do the O-rings first! 🙌
@LifeOfATLS3 ай бұрын
@@dopeydocc4016 no problem. And I think 1000$ for a power steering pump replacement is a little crazy unless they’re gonna redo the whole system
@DangerDavefpv5 ай бұрын
Where in Virginia? I'm in Winston-Salem nc
@Rightfootdown15 күн бұрын
Ptuning in Manassas VA
@petervan73725 ай бұрын
can you just replace the cover?
@TRYtoHELPyou5 ай бұрын
Heh
@hds1815 ай бұрын
Excellent video! Especially the tip about the fasteners that stayed in the door instead of coming off with the panel. Very informative without wasting any time. Well done. Thanks for posting it.
@ChrisBlackyAngeles276 ай бұрын
After he said that about her mini Cooper, she probably filed a divorce 11:30 😂 😂 hope not 😅
@DangerDavefpv6 ай бұрын
I want to skip my next step since im oem turbo is 2867r
@mikebellagiomusicgaming18936 ай бұрын
Im.gonna do this
@DocBBR6 ай бұрын
I installed a spoiler using 3M double stick tape instead of drilling. I'm very happy with the result. It seems the original spoiler was in place using double side tape as well. Still firm a year later.
@SarcasticComments237 ай бұрын
Use to have a BMW, then fell in love with the quality of Honda and Toyota’s 🤟🏼 the BMW’s looking good now
@xerwill7 ай бұрын
Did this recently on my motorcycle. Was going a teeny bit faster than you and it was crazy fun.
@firdausravindar9777 ай бұрын
It sure my makes the job easier. Using gloves may help to prevent cuts on the hand.Excellent video. 😊😊😊
@patrickphilpott24677 ай бұрын
Hi Right Foot Down, was wondering if it would be alright if I used a few clips for a project I’m working on with ProCharger?!? Wanted to make sure it was okay before using any media, thanks!
@DougieFresh139 ай бұрын
Excellent video!!!!!
@DougieFresh139 ай бұрын
I can't forget about this video as I'm interested in a 996.
@TheRealDrGreenbaum9 ай бұрын
We cannot minimize work by popping off the top area only to access the wiring?
@adamsangels987410 ай бұрын
Guessing the buyer made a boo boo for passing up this one
@alwayslearningthefacts588110 ай бұрын
I put the last 125k miles on my 06 530xi. My car now has 254k. It`s still a very nice driver. I`ve done my share of replacing worn parts. No sedan I`ve driven drives as good.
@bostonaudi11 ай бұрын
Feedback - filming with sun in the camera is super annoying.
@owenoseroff11 ай бұрын
I like the wing but im worried it wouldn't look as good and proportional on a sedan.
@gopnik64399 ай бұрын
Just got an ltw wing in the mail and I can say it looks mintyyyy
@zip-tv_11 ай бұрын
Pretty good for stock cars but, all cvt vehicles are really road only, they will overheat. Jeep is known to be a lemon worldwide. Vw killed ppl in dieselgate, never buy one! The sportage in ‘DIESEL’ def best rig has proper transmission. Lightweight all terrains would help all these rigs.
@knightrida6829 Жыл бұрын
Thanks bros
@matthewcorbin4492 Жыл бұрын
Hi you can seats go down the levers sre in the back
@rostamr4096 Жыл бұрын
Thank you, this was very helpful.
@vincentdestigter5980 Жыл бұрын
How to get vice trac off
@vincentdestigter5980 Жыл бұрын
Vsctrac
@vincentdestigter5980 Жыл бұрын
Check engine light
@martinespinosa Жыл бұрын
Should be checked for bore scoring. That is the price for the entire car and more. Otherwise nice video.
@billjones6830 Жыл бұрын
You can always slide a heavier pipe over those if you want to get rid of the sagging, but mine has been fine
@KissLova98 Жыл бұрын
Where can you find the mirror
@TheRealDrGreenbaum9 ай бұрын
Got mine from BAM Wholesale Parts
@itsQUINTEN24 Жыл бұрын
Did the factory tiedown not work? I’m thinking about picking up those battery for my M3.
@Rightfootdown Жыл бұрын
Correct. Needed these instead
@tomford9177 Жыл бұрын
If dom torretto wasn’t such a pussy he would drive this 🤣 nailed it hahahah
@LarryP-hd3oi Жыл бұрын
Outstanding video, did the job without incident, zero issues. Thanks for sharing!
@Rightfootdown Жыл бұрын
We're glad to hear it helped!
@Dirtypacc Жыл бұрын
Do you still have the game I'd love to get on I think I'm 81st I'd love to follow your line ours is similar
@Rightfootdown Жыл бұрын
Sorry, never played Forza 6 again after 7 was released
Пікірлер
Good video FYI your product link to Amazon is to a GoPro not the O rings.
Harbor freight has the open end sockets so you can remove the nut at the top of shock and use the Alan wrench thru the top of socket to keep it from spinning
Is this one specifically made for e46 or 36?
This over was specific for the E46! I haven't seen it appear back on eBay since I bought it
كيف يمكنني التواصل معا الاخ حسين
Great video I’m thinking of picking up a 996 or 997 wish I had a Chris to look at my car
Spoiler alert
Just did mine… pretty easy BuT that bottom bolt is a B! Still have a little whinny noise though.. not sure what’s up… filled the fluid and still there when I accelerate…
Glad you got it done!
Where's the link
Sadly they no longer make them!
Thanks!
Not feasable to get 460hp out of this engine without racing gas or some special type of fuel
Some moron was driving recklessly and knocked my entire driver side mirror off Thank you for this video!
Glad it helped!
Well I messed up and didn't get about half these features on my 2010 535i 😅
Just bought a 2011 civic SI with 123k miles
A thin layer film of Honda power steering fluid should have been applied to those o ring gaskets before final tightening oh well its so easy and cheap to replace them if they leak again it's not that big a loss but I'm sure they will eventually leak again sooner than later since they were installed without putting on a thin film of power steering fluid upon final installation
Would it fit on a sedan?
Hey man i have potentially a really stupid question, but.. im gonna ask anyway. I love the look of the wing but im not really a fan of the bottom part thats sticking out beyond the trunk of the car. Is it possible to remove that bottom half and take just the top part of the wing and install it?
My OEM mirror replacement didn’t have the round black piece either. Great video!
Mine doesn’t whine, but has a small leak. Would I assume it’s the O-rings or a whole new pump? I was quoted $1000 to replace the pump.
Might be too late but that’s insane bro don’t do that. Try and do the o rings first. I wasted time and money buying a new pump and it didn’t fix shitttt
@@LifeOfATLS not to late! I haven’t had money to really do anything yet lol so thank you! I will make sure to do the O-rings first! 🙌
@@dopeydocc4016 no problem. And I think 1000$ for a power steering pump replacement is a little crazy unless they’re gonna redo the whole system
Where in Virginia? I'm in Winston-Salem nc
Ptuning in Manassas VA
can you just replace the cover?
Heh
Excellent video! Especially the tip about the fasteners that stayed in the door instead of coming off with the panel. Very informative without wasting any time. Well done. Thanks for posting it.
After he said that about her mini Cooper, she probably filed a divorce 11:30 😂 😂 hope not 😅
I want to skip my next step since im oem turbo is 2867r
Im.gonna do this
I installed a spoiler using 3M double stick tape instead of drilling. I'm very happy with the result. It seems the original spoiler was in place using double side tape as well. Still firm a year later.
Use to have a BMW, then fell in love with the quality of Honda and Toyota’s 🤟🏼 the BMW’s looking good now
Did this recently on my motorcycle. Was going a teeny bit faster than you and it was crazy fun.
It sure my makes the job easier. Using gloves may help to prevent cuts on the hand.Excellent video. 😊😊😊
Hi Right Foot Down, was wondering if it would be alright if I used a few clips for a project I’m working on with ProCharger?!? Wanted to make sure it was okay before using any media, thanks!
Excellent video!!!!!
I can't forget about this video as I'm interested in a 996.
We cannot minimize work by popping off the top area only to access the wiring?
Guessing the buyer made a boo boo for passing up this one
I put the last 125k miles on my 06 530xi. My car now has 254k. It`s still a very nice driver. I`ve done my share of replacing worn parts. No sedan I`ve driven drives as good.
Feedback - filming with sun in the camera is super annoying.
I like the wing but im worried it wouldn't look as good and proportional on a sedan.
Just got an ltw wing in the mail and I can say it looks mintyyyy
Pretty good for stock cars but, all cvt vehicles are really road only, they will overheat. Jeep is known to be a lemon worldwide. Vw killed ppl in dieselgate, never buy one! The sportage in ‘DIESEL’ def best rig has proper transmission. Lightweight all terrains would help all these rigs.
Thanks bros
Hi you can seats go down the levers sre in the back
Thank you, this was very helpful.
How to get vice trac off
Vsctrac
Check engine light
Should be checked for bore scoring. That is the price for the entire car and more. Otherwise nice video.
You can always slide a heavier pipe over those if you want to get rid of the sagging, but mine has been fine
Where can you find the mirror
Got mine from BAM Wholesale Parts
Did the factory tiedown not work? I’m thinking about picking up those battery for my M3.
Correct. Needed these instead
If dom torretto wasn’t such a pussy he would drive this 🤣 nailed it hahahah
Outstanding video, did the job without incident, zero issues. Thanks for sharing!
We're glad to hear it helped!
Do you still have the game I'd love to get on I think I'm 81st I'd love to follow your line ours is similar
Sorry, never played Forza 6 again after 7 was released