I went from the cr 10s pro V2 to the the X1 carbon 😮 I'm still in shock how much easier it is it just does everything no more gauge checks or bed leveling "manually"
@Living-gnu-643 күн бұрын
I got the A1 and plan on making an enclosure. Same bed size as the P1S so I think it’ll work out
@vkmicrov5 күн бұрын
Bambulabs printers hit different. Just sold my (once again non functional) ender 3 for parts and put that money toward A1. No regrets whatsoever.
@VinePest5 күн бұрын
I'm not even a beginner, but wouldn't you need a more thermal-resistant filament than PLA for the inside of a PC case? Just wondering, I'm completely ignorant.
@kedalm6 күн бұрын
Where do you have AMS?
@waskus6 күн бұрын
I have the P1P, ran it for 1200 hours, then got an ams, now that is a gamechanger
@bbgoesblop9 күн бұрын
Its too expensive😢
@germanxyz10 күн бұрын
I upgraded from an Ender 3 to a Bambu Labs X1 Carbon, and the difference is insane.
@BricksPrints-pn8od12 күн бұрын
You can get a Ams unit for it and you can print it with 4 different colors
@user-um8tq1tz7m13 күн бұрын
Stop buying this product it's from china they are stealing designs it's being banned in the USA
@Cyberpunk206918 күн бұрын
ryzen 5 7600x?
@austinvickymoore365619 күн бұрын
So.. question what is everyone doing with these old enders??? 😂 I want my first printer!! Lol
@leomonk97420 күн бұрын
My favorite thing about the bamboo printers, is that they’re consistent, they are consistently good every single time
@silverify23 күн бұрын
ender 3 v3 ke does the same for most users and its a few times cheaper. Runs out of the box, no need for mods.. And it is pretty fast.
@YosefMalasquez26 күн бұрын
Dam you are underrated
@alexbumbalov963929 күн бұрын
Bro read my mind. Was literally gonna take pics of my PC today and list it. Definitely gonna need to work on the cable management first tho🤝
@SpectralTech25 күн бұрын
Got more videos on this coming too! Some you may know, but other tips you definitely won’t
@coolcraft8302Ай бұрын
and slap an nvidia sticker on there
@coolcraft8302Ай бұрын
RGB
@ColtonGuilfoyleАй бұрын
Quick tips from another KZreadr if you are taking pics make sure to have good angles and lights make sure to state that you have a nvidea graphics card cause of the Fortnite geeks love there fps which won’t make a difference then buying a 6600xt or something but then put in the description 300+ FPS Fortnite or something. after that usually they will overprice for like a 3060 or 2080 make sure to attract the non smart audience just like in KZread. But in this case it’s aka Fortnite geeks usually either Fortnite kids or even parents getting a pc for there child’s birthday will think it’s a good deal
@Faisal_-db9xdАй бұрын
It stayed alive because of your ram 😂
@Veela666Ай бұрын
The before ain't even bad. Wth.
@SpectralTechАй бұрын
This one wasn’t bad, but trust me when I say I’ve seen some baaaad cable management. And when you add years of dust on top of cables in the front, oh man it doesn’t look good 😂
@HEHEXD42069Ай бұрын
I'm trying to get into flipping PC's on FB marketplace. Thanks for the tip.
@SpectralTechАй бұрын
I got a lot more tips coming for selling PCs! Some you may know, but others you definitely won’t.
@CHICKEN_Lord617Ай бұрын
Honestly looks good, although i just look for specs
@SpectralTechАй бұрын
That’s the most important, but when selling PCs, the looks make a huge difference in how fast or slow it sells 😂
@infinitedragonsunlockedАй бұрын
@@SpectralTechyeah especially people that just want to buy and dont care to research what is best for their budget they will most likely pick whatever looks best and wont check specs
@vertical2923Ай бұрын
Ty for the knowledge!
@ArcaneTrooperFTWАй бұрын
I’ve seen soooo many computers with horrible cable management 😂 really does make me less interested
@shauryamukherjee8273Ай бұрын
How does their cable management affect how good the pc is
@HardWhereHeroАй бұрын
So now you know that card was never compatible with that dell motherboard to begin with You put your GPU in the oven for no reason bro. Stop lying 👿 PUTTING A GPU IN AN OVEN ONLY WORKS TO FIX OLD PLAYED OUT GPUS THAT HAVE BROKEN SOLDER JOINTS, DONT LISTEN TO THIS GUY.
@Allenw154Ай бұрын
I think many people have had Frankenstein Ender 3 starting out. It was just the nature of the game back then. Mine died trying to convert to 3mm filament. But nowadays, I'm learning to value time over money. This will be a fine choice.
@M4r10hАй бұрын
I also replaced my old ender 3 for a bambu lab p1s. The quality, usability and no more need for tinkering is a game changer
@georgeg4416Ай бұрын
P1S or P1P ;🫤
@user-mo7sq5uy8sАй бұрын
Yeah I used to have and ender 3 but when I got the p1s it was a game changer
@SoopaFlyismАй бұрын
No touchscreen. And the interface is not pretty. With icons and shit.
@honor9lite1337Ай бұрын
P1S good
@calledout4437Ай бұрын
I love my P1S. Best investment I've ever made. Works perfectly right out of the box.
@RICEDDDАй бұрын
i have an x1c definitly worth the price
@chazwick75Ай бұрын
I have access to a CReailty CR-10 V1 that a friend bought in 2016, did nothing with it, and asked me to start using. As it the 1st and I have no $$$ to upgrade it, what would you suggest I make to improve mine?? Thanks.
@88cfordАй бұрын
I just upgraded to the P1S from an Ender as well, night and day difference!!
@ROOKTABULAАй бұрын
Question I don't see addressed anywhere: does the print quality improve substantially if you print slower?
@bouncingsquare-jx4xy29 күн бұрын
I wouldn't say substantially but depending on the part and how detailed it is you can notice a difference sometimes, also depends heavily on the printer
@malcolmgeldmacher4998Ай бұрын
I LOVE my P1S!
@mehrajhossain-ul6sjАй бұрын
Can you try the toaster print to test the quality of it unless you already have?
@NIGHTDREADEDАй бұрын
So what is the fate of the Ender 3? The garbage bin? Donation? Or use the Bambu to give it new life?
@MeRackoАй бұрын
That printer is shit
@simplegamerz9485Ай бұрын
What’s funny is that you can go faster on an Ender 3 and have all the same features as the bamboo machines
@MegaChickenPunchАй бұрын
cope
@alexandrevaliquette3883Ай бұрын
Nope, the acceleration on Bambu is way faster and the machine is not shaking. It use accelerometer and Ender doesn't. So... Check video comparisons and edith your comment.
@simplegamerz9485Ай бұрын
@@alexandrevaliquette3883 you can actually especially on the new ones even the og one you can add that to it. You should look up the current benchy record it’s held by an Ender 3
@DBXLabsАй бұрын
Cope
@roninstegner70562 ай бұрын
Prusa is better!
@lephtovermeet2 ай бұрын
Bambu did some great stuff, frankly it's amazing for the price point, but there's a lot to be desired. Layer adhesion is trash. It still really really sucks at ABS and ASA. And there's still frequent warping issues. Also, while their slicer is pretty good, it's missing a few clutch features and it sucks for both multiple users and multiple printer setups.
@joeserra982510 күн бұрын
Which model are you printing ABS on? I just got a P1S, going to try printing ABS soon. If someone is trying to print ABS on anything but the X1C or P1S they should not expect good results.
@lephtovermeet10 күн бұрын
@@joeserra9825 if you max out the build plate temp and turn on the aux circulation fan, you can get passable results but if you actually try and use the models for mechanical purposes you'll quickly find out you've got some pretty BS layer adhesion.
@harley96982 ай бұрын
Bro i trust anything with a sport mode 😂
@FATSNAIL-FPV2 ай бұрын
How does it print TPU and nylonCF? No filament tangled in the extruder etc?
@wlyiu40572 ай бұрын
No. This is not the perfect 3D printer. This is the cut-down model of the perfect 3D printer.
@DBXLabsАй бұрын
X1C?
@alexherrera39182 ай бұрын
I am about to by an Ender and i watched your video. I want to print landing gear for small rc planes. I have no idea of the material i need, maybe PLS is suficient...Do you think this pis is a better cost effective option? thanks
Пікірлер
I went from the cr 10s pro V2 to the the X1 carbon 😮 I'm still in shock how much easier it is it just does everything no more gauge checks or bed leveling "manually"
I got the A1 and plan on making an enclosure. Same bed size as the P1S so I think it’ll work out
Bambulabs printers hit different. Just sold my (once again non functional) ender 3 for parts and put that money toward A1. No regrets whatsoever.
I'm not even a beginner, but wouldn't you need a more thermal-resistant filament than PLA for the inside of a PC case? Just wondering, I'm completely ignorant.
Where do you have AMS?
I have the P1P, ran it for 1200 hours, then got an ams, now that is a gamechanger
Its too expensive😢
I upgraded from an Ender 3 to a Bambu Labs X1 Carbon, and the difference is insane.
You can get a Ams unit for it and you can print it with 4 different colors
Stop buying this product it's from china they are stealing designs it's being banned in the USA
ryzen 5 7600x?
So.. question what is everyone doing with these old enders??? 😂 I want my first printer!! Lol
My favorite thing about the bamboo printers, is that they’re consistent, they are consistently good every single time
ender 3 v3 ke does the same for most users and its a few times cheaper. Runs out of the box, no need for mods.. And it is pretty fast.
Dam you are underrated
Bro read my mind. Was literally gonna take pics of my PC today and list it. Definitely gonna need to work on the cable management first tho🤝
Got more videos on this coming too! Some you may know, but other tips you definitely won’t
and slap an nvidia sticker on there
RGB
Quick tips from another KZreadr if you are taking pics make sure to have good angles and lights make sure to state that you have a nvidea graphics card cause of the Fortnite geeks love there fps which won’t make a difference then buying a 6600xt or something but then put in the description 300+ FPS Fortnite or something. after that usually they will overprice for like a 3060 or 2080 make sure to attract the non smart audience just like in KZread. But in this case it’s aka Fortnite geeks usually either Fortnite kids or even parents getting a pc for there child’s birthday will think it’s a good deal
It stayed alive because of your ram 😂
The before ain't even bad. Wth.
This one wasn’t bad, but trust me when I say I’ve seen some baaaad cable management. And when you add years of dust on top of cables in the front, oh man it doesn’t look good 😂
I'm trying to get into flipping PC's on FB marketplace. Thanks for the tip.
I got a lot more tips coming for selling PCs! Some you may know, but others you definitely won’t.
Honestly looks good, although i just look for specs
That’s the most important, but when selling PCs, the looks make a huge difference in how fast or slow it sells 😂
@@SpectralTechyeah especially people that just want to buy and dont care to research what is best for their budget they will most likely pick whatever looks best and wont check specs
Ty for the knowledge!
I’ve seen soooo many computers with horrible cable management 😂 really does make me less interested
How does their cable management affect how good the pc is
So now you know that card was never compatible with that dell motherboard to begin with You put your GPU in the oven for no reason bro. Stop lying 👿 PUTTING A GPU IN AN OVEN ONLY WORKS TO FIX OLD PLAYED OUT GPUS THAT HAVE BROKEN SOLDER JOINTS, DONT LISTEN TO THIS GUY.
I think many people have had Frankenstein Ender 3 starting out. It was just the nature of the game back then. Mine died trying to convert to 3mm filament. But nowadays, I'm learning to value time over money. This will be a fine choice.
I also replaced my old ender 3 for a bambu lab p1s. The quality, usability and no more need for tinkering is a game changer
P1S or P1P ;🫤
Yeah I used to have and ender 3 but when I got the p1s it was a game changer
No touchscreen. And the interface is not pretty. With icons and shit.
P1S good
I love my P1S. Best investment I've ever made. Works perfectly right out of the box.
i have an x1c definitly worth the price
I have access to a CReailty CR-10 V1 that a friend bought in 2016, did nothing with it, and asked me to start using. As it the 1st and I have no $$$ to upgrade it, what would you suggest I make to improve mine?? Thanks.
I just upgraded to the P1S from an Ender as well, night and day difference!!
Question I don't see addressed anywhere: does the print quality improve substantially if you print slower?
I wouldn't say substantially but depending on the part and how detailed it is you can notice a difference sometimes, also depends heavily on the printer
I LOVE my P1S!
Can you try the toaster print to test the quality of it unless you already have?
So what is the fate of the Ender 3? The garbage bin? Donation? Or use the Bambu to give it new life?
That printer is shit
What’s funny is that you can go faster on an Ender 3 and have all the same features as the bamboo machines
cope
Nope, the acceleration on Bambu is way faster and the machine is not shaking. It use accelerometer and Ender doesn't. So... Check video comparisons and edith your comment.
@@alexandrevaliquette3883 you can actually especially on the new ones even the og one you can add that to it. You should look up the current benchy record it’s held by an Ender 3
Cope
Prusa is better!
Bambu did some great stuff, frankly it's amazing for the price point, but there's a lot to be desired. Layer adhesion is trash. It still really really sucks at ABS and ASA. And there's still frequent warping issues. Also, while their slicer is pretty good, it's missing a few clutch features and it sucks for both multiple users and multiple printer setups.
Which model are you printing ABS on? I just got a P1S, going to try printing ABS soon. If someone is trying to print ABS on anything but the X1C or P1S they should not expect good results.
@@joeserra9825 if you max out the build plate temp and turn on the aux circulation fan, you can get passable results but if you actually try and use the models for mechanical purposes you'll quickly find out you've got some pretty BS layer adhesion.
Bro i trust anything with a sport mode 😂
How does it print TPU and nylonCF? No filament tangled in the extruder etc?
No. This is not the perfect 3D printer. This is the cut-down model of the perfect 3D printer.
X1C?
I am about to by an Ender and i watched your video. I want to print landing gear for small rc planes. I have no idea of the material i need, maybe PLS is suficient...Do you think this pis is a better cost effective option? thanks