Hi Nice meeting up with you again....Many thanks for allowing Rosie to drive your fantastic loco,this made her day...Our video should be uploaded tomorrow.....Best wishes Chris and Rosie
@Nyra19104 жыл бұрын
You're welcome -- having followed your many videos, I thought it to be obligatory !
@jasonargone97777 жыл бұрын
Its a job to drive this truck....but its cool !
@Gavs_rc_hobbies7 жыл бұрын
You wouldn't want your hand to accidently slip and hit the flywheel.....
@peter158717 жыл бұрын
Exellent bit of video, well done
@peter158717 жыл бұрын
very good trefor think i may have to give it a look-see sometime
@wooltman8 жыл бұрын
She looks and sounds great,do you still go to the Joys of Life railway?.....Regards Chris.
@Nyra19108 жыл бұрын
+wooltman Yes- but I've not managed it this year due to lack of an engine to run unfortunately.
@foreversteam8 жыл бұрын
WOW! Not only does it look fantastic but it steams a dream too! Perfect cosmetically and mechanically - no leaks anywhere! Wonderful! Thanks for taking this video footage, just superb!
@TheNewStoryteller9 жыл бұрын
very nice.
@robertnoyes55089 жыл бұрын
hi is it possible moor engines where built ?
@Nyra19109 жыл бұрын
Robert Noyes Hi -- no, these are not Moor engines -- they are Fletcher-Jennings, built at Whitehaven, Cumbria for the Talyllyn Railway.
@foreversteam11 жыл бұрын
Great video and well done!!! Thanks for uploading this - lovely!
@Nyra191011 жыл бұрын
Hopefully I shall find out in 2013 !
@foreversteam11 жыл бұрын
I bet you would do better now that you have adjusted the suspension!
@Nyra191011 жыл бұрын
On the go -- 2 x SAR NG-ST timber wagons, 1 x rail bolster wagon + guards van. Winter project.
@Nyra191011 жыл бұрын
Thank-you and, yes, it is ! Please go to your inbox for track location.
@DansModellingUniverse11 жыл бұрын
Great video and looks like a great track. I like that you can really hear the engine working hard on the inclines. I've tried to find the tracks location, found their website but it doesn't say where it is. Roughly where is the track location?
@Nyra191011 жыл бұрын
Hi -- NGLEC is organised by the Northern Association of Model Engineers -- as Rugby is a member of NAME you could offer to host it through your NAME Club rep. Next year is at South Cheshire MES.
@Nyra191012 жыл бұрын
We certainly did.
@faturesop12 жыл бұрын
hey by any chance did that loco and somome with it goto the kinver 50th anerversery
@Steamnut8412 жыл бұрын
It's a shame that oil feed pipe failed, the engine wasn't burning ant coal . It's immensely efficient. Ben
@foreversteam12 жыл бұрын
Very nice!!! Looks like Joan performed well! She has a good beat on her - it will be nice seeing her on the ground level with a good load!
@Nyra191012 жыл бұрын
I believe on Sunday 15th April, but I am off to Wales with the Lawley.
@jma793012 жыл бұрын
like this one
@jma793012 жыл бұрын
YE WHEN THEY ARE RUNNING AGAIN
@Nyra191012 жыл бұрын
Thanks -- see you there when we get running again !
@jma793012 жыл бұрын
i am a member at that club and nice locomotive
@jma793012 жыл бұрын
i am a member at that club and it is a nice engine to look at
@Nyra191012 жыл бұрын
@The90733 Made in South Africa -- they have perfected the steam whistle: model & full size !
@JackSmilerBoySharples12 жыл бұрын
Thats a brilliant whistle on the Lawley!
@Nyra191012 жыл бұрын
@foreversteam -- It's "Pretoria", not "Petunia" !
@Nyra191012 жыл бұрын
@wooltman Yes thanks -- but more than a tad on the cold side !!
@wooltman12 жыл бұрын
Great stuff,looks like you all had a good time,nice to see the younger guys having a drive too.Chris
@foreversteam12 жыл бұрын
@Nyra1910 Ha Ha Ha - Yes indeed me old flower!
@Nyra191012 жыл бұрын
@foreversteam What's 50 thou between friends ?
@foreversteam12 жыл бұрын
@Nyra1910 How did I know you were going to jab me on the "little" part - The thought crossed my mind that I should rephrase it because I knew you would have something to say about it but I called my bluff and you've picked me up on it like I knew you would! ;) By the way, my 3 1/2" 19D has 1.8" Cylinders ;)
@Nyra191012 жыл бұрын
@foreversteam -- Not so little when compared to other 5" locos -- 1 3/4" cylinders !
@foreversteam12 жыл бұрын
Nice bit of footage that! Nice little loco!
@Encore133212 жыл бұрын
@Nyra1910 I Got my Conway from station road steam, got a part built one i am trying to build with varying amounts of success. Your model looks massive for 5" gauge.
@Nyra191012 жыл бұрын
@Encore1332 On this occasion -- no. I have made others, but this one came from South Africa through Station Road Steam. It has some issues with poor traction which I am currently working on -- and when sorted it will be an awesome machine !
@Encore133212 жыл бұрын
awesome machine, did you make it yourself?
@Nyra191012 жыл бұрын
@JacSGWR Thank-you -- I am very happy too. Re Dougal -- have a look at my 'Lawley visits Joys of Life' video, and The Joys of Life Railway website. Good luck.
@JacSGWR12 жыл бұрын
*drool. Would love to have one of these! Thinking of starting a 5" gauge Dougal myself but not too sure about it at the moment. JacSGWR
@Nyra191012 жыл бұрын
@foreversteam -- Why ? The physics dictate that the forces are no different -- it is purely psychological !
@foreversteam12 жыл бұрын
Beautiful!! Wonderful!!! Lovely engine!!! Thanks for posting! I probably would be too scared to ride such big machines on raised track! Regards Bryn
@wooltman12 жыл бұрын
@Nyra1910 I look forward to seeing some video of it at JOL
@Nyra191012 жыл бұрын
@wooltman -- Err -- tomorrow ?
@wooltman12 жыл бұрын
She is a beauty bet it will be running at the Joys of life soon?
Пікірлер
good run , love the sound
well done trefor
Hi Nice meeting up with you again....Many thanks for allowing Rosie to drive your fantastic loco,this made her day...Our video should be uploaded tomorrow.....Best wishes Chris and Rosie
You're welcome -- having followed your many videos, I thought it to be obligatory !
Its a job to drive this truck....but its cool !
You wouldn't want your hand to accidently slip and hit the flywheel.....
Exellent bit of video, well done
very good trefor think i may have to give it a look-see sometime
She looks and sounds great,do you still go to the Joys of Life railway?.....Regards Chris.
+wooltman Yes- but I've not managed it this year due to lack of an engine to run unfortunately.
WOW! Not only does it look fantastic but it steams a dream too! Perfect cosmetically and mechanically - no leaks anywhere! Wonderful! Thanks for taking this video footage, just superb!
very nice.
hi is it possible moor engines where built ?
Robert Noyes Hi -- no, these are not Moor engines -- they are Fletcher-Jennings, built at Whitehaven, Cumbria for the Talyllyn Railway.
Great video and well done!!! Thanks for uploading this - lovely!
Hopefully I shall find out in 2013 !
I bet you would do better now that you have adjusted the suspension!
On the go -- 2 x SAR NG-ST timber wagons, 1 x rail bolster wagon + guards van. Winter project.
Thank-you and, yes, it is ! Please go to your inbox for track location.
Great video and looks like a great track. I like that you can really hear the engine working hard on the inclines. I've tried to find the tracks location, found their website but it doesn't say where it is. Roughly where is the track location?
Hi -- NGLEC is organised by the Northern Association of Model Engineers -- as Rugby is a member of NAME you could offer to host it through your NAME Club rep. Next year is at South Cheshire MES.
We certainly did.
hey by any chance did that loco and somome with it goto the kinver 50th anerversery
It's a shame that oil feed pipe failed, the engine wasn't burning ant coal . It's immensely efficient. Ben
Very nice!!! Looks like Joan performed well! She has a good beat on her - it will be nice seeing her on the ground level with a good load!
I believe on Sunday 15th April, but I am off to Wales with the Lawley.
like this one
YE WHEN THEY ARE RUNNING AGAIN
Thanks -- see you there when we get running again !
i am a member at that club and nice locomotive
i am a member at that club and it is a nice engine to look at
@The90733 Made in South Africa -- they have perfected the steam whistle: model & full size !
Thats a brilliant whistle on the Lawley!
@foreversteam -- It's "Pretoria", not "Petunia" !
@wooltman Yes thanks -- but more than a tad on the cold side !!
Great stuff,looks like you all had a good time,nice to see the younger guys having a drive too.Chris
@Nyra1910 Ha Ha Ha - Yes indeed me old flower!
@foreversteam What's 50 thou between friends ?
@Nyra1910 How did I know you were going to jab me on the "little" part - The thought crossed my mind that I should rephrase it because I knew you would have something to say about it but I called my bluff and you've picked me up on it like I knew you would! ;) By the way, my 3 1/2" 19D has 1.8" Cylinders ;)
@foreversteam -- Not so little when compared to other 5" locos -- 1 3/4" cylinders !
Nice bit of footage that! Nice little loco!
@Nyra1910 I Got my Conway from station road steam, got a part built one i am trying to build with varying amounts of success. Your model looks massive for 5" gauge.
@Encore1332 On this occasion -- no. I have made others, but this one came from South Africa through Station Road Steam. It has some issues with poor traction which I am currently working on -- and when sorted it will be an awesome machine !
awesome machine, did you make it yourself?
@JacSGWR Thank-you -- I am very happy too. Re Dougal -- have a look at my 'Lawley visits Joys of Life' video, and The Joys of Life Railway website. Good luck.
*drool. Would love to have one of these! Thinking of starting a 5" gauge Dougal myself but not too sure about it at the moment. JacSGWR
@foreversteam -- Why ? The physics dictate that the forces are no different -- it is purely psychological !
Beautiful!! Wonderful!!! Lovely engine!!! Thanks for posting! I probably would be too scared to ride such big machines on raised track! Regards Bryn
@Nyra1910 I look forward to seeing some video of it at JOL
@wooltman -- Err -- tomorrow ?
She is a beauty bet it will be running at the Joys of life soon?
Lucky! Beutiful looking loco!