Welcome to my KZread channel "RobertsVideoMachine" and thanks for watching my videos. Don't forget to subscribe. I'll be posting How to videos, SmartPhone videos, Comparison videos, Nature videos, Funny videos, Kid videos, Scary videos along with other special videos. I hope you enjoy my channel and keep on watching. Thanks.
Пікірлер
Como sino le uviera pasa Dada
@@estebanchimol ¡Como Nuevo!
Thank you🎉
@ashleybaker.hairlvnv You're very welcome! I'm glad my video helped you out. Thanks for watching, commenting, and don't forget to like and subscribe.
Thanks. Repair guy just broke my housing while Changing my alternator out.
You should've had him fix it for you. I had a mechanic break something on my old 1991 Ford Mustang and didn't want to fix what he broke. I ended up changing mechanics. I don't know why mechanics don't want to take responsibility for what they do. How am I going to paint someone's house, then break their window, and then not pay to have it replaced. It doesn't make sense. Well, good luck! Thanks for watching, commenting, and don't forget to like and subscribe.
Hi quick question i have a 2000 v6 3.8 and i recently have a trans leak but cannot find source its an automatic and i checked the transpan bolts everything is tight gasket might be a little warn but back to the point i jacked my car up and addressed the issue i need a new gasket for the trans pan buut my coolant was alittle below level to begin with and now its overfilled and brown would this definitely help it or how do i get it back to leve because its been 2+ days and its filled still l sorry for the dumb question i just felt like i need to ask for help its been parked for 12 years and i wantvto restore it best i can has only 98,000 original engine thanks for your time and help much appreciated 🙏
A good radiator flush might help. That's why I like my version of the coolant flush technique since the engine doesn't need to be running. Let us know how it turned out. Thanks for watching, commenting, and don't forget to like and subscribe.
Got the same issue with mom. The fuel cap light wasn’t on till reciently but suddenly my service engine light is on and I hope it’s just the cap
The fuel cap is the easiest fix for almost all the EVAP codes that result in the check engine light coming on. I wish you luck! Thanks for watching, commenting, and don't forget to like and subscribe.
Very thorough ty
How did you put the seal ring on? Did it stretch over top?
I remember I had to use the old one since mine didn't come with it. I just transferred it onto the new part. If and when you buy the replacement part, always compare it to the original. You may have to transfer parts from the original to the new one that don't come as part of it. I hope this helps. Thanks for watching, commenting, and don't forget to like and subscribe.
THANK you sir
You're welcome! I'm glad you enjoyed the video. Thanks for watching, commenting, and don't forget to like and subscribe.
I can't seem to keep it down to turn it
You have to keep playing with it. I remember I struggled a lot with putting it on. You have to find the sweet spot. Good luck! Thanks for watching, commenting, and don't forget to like and subscribe.
Hi ! I have a 2002 LX 4 door, with PO141, in this case downstream O2 sensor. Any recommendations where I can find the correct part ?
This best place if you want professional advice is the Honda dealership, but since it's 22 years old they may not have the parts available. You can check AutoZone, Advance Auto, O'Reilly Auto Parts, NAPA Auto, or online auto parts stores. These places always have aftermarket stuff, but again, since it's 22 years old you may have to special order it. I hope this helps. Thanks for watching, commenting, and don't forget to like and subscribe.
@@RobertsVideoMachine thanks
What the fuck😂😂😂😂
🤮
Thank you for taking the time to give a tour of your room. My first time staying on this end of the strip; just passing through for an event, so I didn't want to spend much on a hotel room I wouldn't be in much. Was skeptical because of the low rate, but this seems cool enough for my short stay. Appreciate you sharing!
@donnathomas1545 I'm glad you enjoyed the video and found it helpful. I'll try to make more videos like this. Thanks for watching, commenting, and don't forget to like and subscribe.
What is the model of the delta shower?
@Darthmom3 I didn't install it originally, but I believe it's the Delta Monitor 17 Series (double-check). The parts I bought came with the part# RP46463 (cartridge). I hope this helps. Thanks for watching, commenting, and don't forget to like and subscribe.
does this have backlit keyboard?
No, the keyboard is not backlit. Thanks for watching, commenting, and don't forget to like and subscribe.
Song title of 4:44?
I'm not familiar with these songs and I didn't see a performance program while I was there. Hopefully someone here can chime in and provide us the answer. Thanks for watching, commenting, and don't forget to like and subscribe.
Guy lines just go out for more support?
It does look like it. I think you can use the guy lines to tie it down and provide more support. I hope this helps. Thanks for watching, commenting, and don't forget to like and subscribe.
Did you have a hard x putting together?? I’m like we’re do the poles x over in directions . And a pole has a bend or dent in where do they go I’m so confused 🫤
@lmleona It's pretty hard setting up the tent. I had three (3) other people helping me. I ended up just buying a pop-up tent. Those are a lot easier. You can check out my video here: kzread.info/dash/bejne/eZeE1qSTfKrSfLQ.html I hope this helps. Thanks for watching, commenting, and don't forget to like and subscribe.
@@RobertsVideoMachine yes I thought so also getting pop up one omg 😳 ty 👈🏻
Is Parking free?
When I stayed, parking was complimentary. It's a valet service. They park the car for you. There's no self-parking. I hope this helps. Thanks for watching, commenting, and don't forget to like and subscribe.
@@RobertsVideoMachine Thank you.
De la merde cette machine à éviter fortement
Merci pour votre contribution. Je suis sûr que les gens trouveront cela utile. Continuez à regarder, à commenter et n’oubliez pas d’aimer et de vous abonner. Remarque : Ce document a été traduit de l’anglais vers le français à l’aide de Microsoft Bing.com
Blinken is Israel's ambassador to the JUnited States.
can you do one of the marine dancer double?
@markshumaker4135 If I get the opportunity to make a video of this model, I most certainly will. Thanks for the suggestion. Keep watching, commenting, and don't forget to like and subscribe.
LOOKS COOL..... But certainly not efficient. or effective. HERE is Why: The spray pattern for these and I mean ALL OTOs are poor in design. Most lawns do not require a large stream of water falling on one spot. The foliage of almost all lawns is by nature designed to trap a mist type of spray pattern. The smaller the spray pattern the better the surface coverage. Lawns by nature only need approximately 1"-2" of water on top of the surface area. This (OTO) pattern will not provide that. IN FACT you may get 2"-4" of water on some areas and 0 coverage on the rest. This would greatly affect the outlook of the lawn as dry spots will certainly show and render the product un-effective. Falling short of a GREEN lawn and leaving canvas of uneven colors. The un-efficient part is that having sprayed say 100 gallons of Water and most of it concentrated in one spot/area would have been enough water however due to the poor spray pattern its wasted/overwatered leaving some areas soggy while others are unwatered. Writing this is not to discredit the company, I truly wish them the best. However, if a company is focused on quality its an easy fix, I have built complete sprinkler systems since I was 14 and know the topic well. From the ground up, plumbing and Electrical, I have done it all. I know what it takes to keep a DARK Green Lawn. Like most things its simple but only if you know what you're up against. I lived all over the country as a military veteran, and know that the battles the Midwest faces are different than that of The OLD South. California, Oregon, and Washington face all together another issue. The East Coast in general have in my opinion the best lawns. But I wont fight over opinions, the fact of the matter is your needs are determined by you climate and species of lawn. focus on those things and CUT your GRASS HIGH to avoid weeds from gaining any power. (mic drop)
Thanks for the detailed explanation. I'm sure this will help a lot of viewers decide. Keep watching, commenting, and don't forget to like and subscribe.
Thank you!
You're welcome! I'm glad you enjoyed my video. Thanks for watching and don't forget to like and subscribe.
Quick question. I recently changed what i believe was the coolant temp sensor on my 01 civic lx however the one i changed was by the thermostat housing. I do have the sensor shown in this video as well. What is the difference between the 2 sensors. Im having an overheating issue as well
I'm not sure and I can't check since I already sold the car. I do remember my old 1991 Ford Mustang having several temperature sensors. I recall having to replace one-by-one depending on what the local mechanic diagnostics came back with. I never had to replace the same one twice, so this Honda Civic could be similar. Hopefully someone can chime in and let us know. Thanks for watching, commenting, and don't forget to like and subscribe.
You have the part number from autozone?, i cant find it
The part I got for my car was the Duralast PV521. My car is a 2004 Ford Mustang 3.9L V6. Double check with your exact vehicle and the people at AutoZone. I hope this helps. Thanks for watching, commenting, and don't forget to like and subscribe.
El barquito portugués. Yo Tenia la cabeza debajo del agua en la playa y me pasó por arriba. Cuando la saqué lo vi alejándose y estiré la mano y lo cogí pensando que era una hebilla par el pelo . Que creen? Se me enrolló desde la mano hasta casi el hombro derecho. Qué picazón y dolor . Me hubiera cortado el cuello. 😢😢. Me dieron a tomar un antihistasminico. Y restregaron con arena, porque se me pegó a la pie. Qué susto. Todos salieron de agua.
Gracias por compartir esta increíble historia. He oído que la picadura de medusa es algo que nunca quieres experimentar. Me alegro de que estés a salvo y espero que otros puedan aprender de esta experiencia. Sigue viendo, comentando y no olvides dar me gusta y suscribirte. Nota: Esto fue traducido por Bing.com de Microsoft
😳 "Promo SM"
Great video. I have an 02 v6 3.8 and it seems whenever my check engine light comes on I replace part and it'll run for a week then it'll come on again for something different. Last time it was the intake manifold runner control. A couple bushings went bad. Cost me 35 dollars to fix. Garage wanted 400 bucks. Lol. I'm no mechanic by no means but thanks to your videos and others I can do the work myself and save lots of cash. Thank you so much.
Thanks for your positive feedback. I always try to fix my cars myself, because mechanics are really expensive. I'm glad my videos were helpful. Keep watching, commenting, and don't forget to like and subscribe.
It looks pretty nice.
Thanks for your positive feedback! Keep watching, commenting, and don't forget to like and subscribe.
Nice video 👍
Thanks 👍
That’s such a scary part to get stopped at 😂
I think the ride using that part to get caught up to speed. I could be mistaken, but hopefully someone from Disney can chime in. Thanks for watching, commenting, and don't forget to like and subscribe.
Hi, I saw your KZread channel. Your videos are really awesome. I love it. But Some of your video isn’t optimize properly that's why you aren’t get much views on your video. Can i have your any contact to get more discuss on it..?
Wont the water mess up anything? Like the battery terminals
@DanielMartinez-Gutierrez I usually wash the engine afterwards. I do cover the alternator to prevent water spraying directly into it. There are other areas that are recommended you cover if you're worried about water damage. Thanks for watching, commenting, and don't forget to like and subscribe.
What’s the name of that white elbow on the canister?it’s what I neeed since it broke off when I was re connecting the fuel tank after changing fuel pump.
@DanielLopez-dv4uw I believe it's called the EVAP Canister Vent Solenoid. I have a playlist with all my Mustang videos, and you'll be able to see that video there with the installation of it as well. Thanks for watching, commenting, and don't forget to like and subscribe.
no agression happening atall u c
F*** DISNEY 🖕🖕🖕🖕🖕
😂 I’m death
I have same piece of shit.
i thought the drop went forward. i didn't know it turned to the right
@ToriThompson-pj9ng The ride looks completely different with all the lights on. I thought the drop was bigger, but it looks small. Thanks for watching, commenting, and don't forget to like and subscribe.
Thanks for the vid!
@SteveSaamer916 I'm glad you enjoyed the video. Thanks for watching, commenting, and don't forget to like and subscribe.
Wow my blind paralyzed grandmother can do nails better than that and shes been dead for two decades.
Scraping the firmament??
Cool!
Fw@ Urth 👇
😢
I have seen you touch touch right after printing, can you laminate it right after printing? Is print considered scratch resistant? Can you apply printed vinyl directly on a window? Or a car? Right after printing?
@TheBasquiatjm I don't own one of these printers, but maybe someone here can respond to this thread. Thanks for watching, commenting, and don't forget to like and subscribe.
Thanks a lot Very nice
I'm glad you enjoyed the video. Thanks for watching, commenting, and don't forget to like and subscribe.
Good but I wanted to know how to actually do it... Like how much force to put on it when installing the new piece 🧩 I saw this video and I broke it 😅
I'm not sure exactly how much force should be applied, but a good rule of thumb is to never over tighten. Maybe someone on this thread can chime in with the exact force. I always just make sure it's not loose and rarely over tighten. Thanks for watching, commenting, and don't forget to like and subscribe.
Beyonce I love you captain phasma
Very helpful, thank you
I'm glad the video helped you out. Thanks for watching, commenting, and don't forget to like and subscribe.
Cobraflex is the absolute worst company to deal with. The company I work for purchased this machinery in order to expand our business. We have four locations and want to be able to utilize it in all of our stores. However, we have had nothing but issues with our machine that we purchased less than two months ago and Cobraflex is impossible to deal with. They never return phone calls, emails, etc. They set up appointment times to call and they never call.
Thanks for giving us this feedback. Hopefully others can chime in with their experience as well. Keep watching, commenting, and don't forget to like and subscribe.