Пікірлер

• 
  @fielddog8111Күн бұрын

  Excellent video.

• 
  @Boats181818 күн бұрын

  what about showing the Vertical Scale in the Profile view

• 
  @jimpoole81421 күн бұрын

  Super useful as ever JB!

• 
  @davorinpotocnik559923 күн бұрын

  Hi. I know how to make new linetype with shapa and it works ok. On my computer. When i send my drawing or only .lin file to someone, its not working. Is it because od shape or what i have to do that linetype will work on everyone computer? Thank you.

• 
  @alirezafarshad4701Ай бұрын

  Do we have such a command for AutoCAD?

• 
  @saital2 ай бұрын

  Thank you so much! That was simple an perfect!

• 
  @freez092also2 ай бұрын

  Hi Jerry.. not sure if you provide answers through comments like this on your channel but I've been trying to troubleshoot an issue. I've been using a DJI Mini 4 Pro to fly and capture geotagged photos autonomously with no base station and when importing into Recap Photo, even though the stitching is clean and I select the 'real world' coordinate system upon import for processing with multiple GCPs (north, easting, and elevations assigned), whenever I export to any format (xyz, PLY, PTS, etc), the X, Y, and Z end up stripped out and are defaulting to 0. Any idea where in the process that the coordinate system is getting lost?

• 
  @swabicivilknowledge45822 ай бұрын

  Hi sir how are you

• 
  @TylerLauzen3 ай бұрын

  CGSLIST, P, 'PN The above command provides everything you need at the command line without opening new windows.

• 
  @fielddog8111Күн бұрын

  Wrong. Output is Grade: 0.00%, Slope: Horizontal, Horiz dist: 97.68'. The input was from my data. Unfortunately, no bearing. I gave you a thumbs up because you meant well.

• 
  @timwest783 ай бұрын

  Very cool

• 
  @thesherryperdue4 ай бұрын

  Good Afternoon. Is there a way to create a table that includes all the parcel site information but also includes the following; Finish Floor Elev, Garage Slab Elev, Underside of Footing Elev., Lot Corner Grades, Front & Rear Elevations

• 
  @diallohammady18754 ай бұрын

  Good

• 
  @oscarj.delgado54824 ай бұрын

  Too long

• 
  @ubadaashaeib82374 ай бұрын

  good idea how can I do this in Revit ?

• 
  @parkerzurbuch5 ай бұрын

  What can you do if AutoCAD Civil 3D will not allow you to open a Data Source Table? I loaded an .mdb file into my task pane, but cannot open or edit that table once it is loaded in.

• 
  @wurevolution345 ай бұрын

  6 years later, this video saved a bald man from pulling his hair out! Thanks!!

• 
  @kharroubiahmed12995 ай бұрын

  merci beaucoup on souhaite de continuer ces cours important

• 
  @shamstec5 ай бұрын

  really awesome

• 
  @baldheadmatt5 ай бұрын

  How do I conver the blocks back to points???

• 
  @stevewitman6 ай бұрын

  At 3:50 you actually CAN and SHOULD use the same line file name as before ... it will ask if you want to overwrite, click YES an procede. It will overwrite the existing file with one that has the new linetype appended to your previous custom line types, automatically accomplishing "turning everything into a single linetype file" instead of copying and pasting at 11:18. Also, if you decide to redo one of your custom linetypes, you can do the same process aagain using the same name as the linetype you wish to redfine and say Y to overwriting, it will overwrite just the one custom linetype within your custom linetypes file. Another note, if you want indicate inches in a custom linetype file, for something like this --- 12" --- for instance, you have to use two single quotes like this '' instead of one double quote " or you could define a custom shape. If you define a custom linetype with with arrows for flow direction and when you use it on a polyline and it is pointing the wrong direction, you can use REVERSE command on the polyline to change the direction of the custom linetype.

• 
  @user-jt5qt1zi8t6 ай бұрын

  Im having a hard time connecting the node to the elevation text..

• 
  @lmthunzi6 ай бұрын

  Woow this is excellent Jerry, I have been looking for this for years, Just subscrided

• 
  @fireballz77 ай бұрын

  Hey Jerry, Can you do the opposite? Create a perpendicular curve from a line?

• 
  @ziar258 ай бұрын

  Brilliant. Thanks a lot Jerry.

• 
  @MusaytMohammed8 ай бұрын

  Can’t get the link to download the site data table template in civil 3d

• 
  @MohamedElsebai8 ай бұрын

  Amazing, Thank you for the valuable Video, general Question please: where do you see using this type of analysis in GIS vs Civil 3D? They sure Overlap?

• 
  @Mdcgeek979 ай бұрын

  Could you tell me why when I add an automatic property definition such as Handle to a pipe it will not populate?

• 
  @nunojesus73279 ай бұрын

  Very interesting and powerful at same time. Thank you for sharing

• 
  @geercelis9 ай бұрын

  Very useful, many thanks!

• 
  @manoharsingh64219 ай бұрын

  Very nice video, sir this elevation you are entering , is this pvi or tagent point

• 
  @Civil3D-Lahore9 ай бұрын

  Who can understand eagle point

• 
  @PrashantSharma-ut5dm10 ай бұрын

  I am using Civil 3D for railway projects, I need a curve delta angle with a spiral. Can you please help me with this?

• 
  @darkomilosavljevic10 ай бұрын

  Whenever i have some problem with civil 3d, somehow i end up doing what Jerry says. Jerry, thank you!

• 
  @mikicamickeysporea181510 ай бұрын

  Hey Jerry, as always a Master level tips :) Thanks for that

• 
  @chrisleach365910 ай бұрын

  This was very helpful and will save me countless hours in the future. Used a project we had with nearly 2000 Parcels that I needed to add PIN #'s and Addresses. Unlike your "perfect" shapefile mine is not so there is some 'tweaking' that needs to be done, but, man is this a time saver for me and a great jump off point to fine tune my own workflow for future projects.

• 
  @CamdenDean11 ай бұрын

  simple, and just what i needed. thanks, jerry!

• 
  @user-vu2ll2gz7k11 ай бұрын

  How big the text needs to be ? I always have a hard time creating lines because the text is either to small or to big and the length of the lines will be also helpful, thanks

• 
  @thingsyoucando6493 Жыл бұрын

  Thank you!

• 
  @andrewcavallaro6939 Жыл бұрын

  I’m having an issue with the text being in line in paper space but in model space it shows below the line and off center

• 
  @Rosalyz Жыл бұрын

  Thank you!!!

• 
  @skrimpdaddy Жыл бұрын

  Thanks for this video Jerri, Civil3D has changed our business practice where our water authority has a submittal policy that requires submitting engineers to completely separate the utility features onto separate layers within the drawing by feature type and diameter. This allows us use the "load objects" tool in Arcmap to mass load and mass attribute the cad points and lines into the feature classes by the various cad layers within the drawing. This tool "load objects" will not be included in ArcPro. So we are looking at updating our policy to speak to a Civil3D workflow, where the append tool in ArcPro will take the place of the load objects tool. I hope to share our schema with area engineers to match our schema and supply us with properly attributed data that will append to our utility feature classes seamlessly. Do you have any experience in ArcPro appending attrubuted data to a feature class? if so I would love a video of that. Thanks!

• 
  @josecamposeco8883 Жыл бұрын

  I was looking for this, Really helpful

• 
  @richardwilmarsalascaballer8746 Жыл бұрын

  excelente video, por favor podrias subir un video en como realizar aquel tipo de diseño de lotizacion. gracias

• 
  @richardwilmarsalascaballer8746 Жыл бұрын

  muy interesante, desconocia de este tip

• 
  @dushanepowell3782 Жыл бұрын

  Jerry, for some reason the map task pane is not creating a map similar to what you have created. Do you have any suggestions?

• 
  @user-bp6ye4eu3v Жыл бұрын

  hello, can we put some hatch in our shape ??

• 
  @Rosalyz Жыл бұрын

  Thank you, you're awesome!!

• 
  @user-dw1tp7zc4e Жыл бұрын

  You're a genius mate...

• 
  @esanchezv Жыл бұрын

  Cuando vuelves hacer más videos de este tipo cortos y precisos

• 
  @tommccarrick18 Жыл бұрын

  Hi - thanks for the video. Could you share the "road section" style?