WERKSTATT (workshop) is just a friend, a brother, and myself buying neat and/or neglected cars and fixing / upgrading them and sending them back out into the world.
All I do is downsize my stuff and it still grows to fill all available space.
@Nas_Atlas9 күн бұрын
I can't have a vehicle making dinging noises from the door or seatbelt open so I bypassed the door switch and then my fog light switch stopped working. I'm retired from vehicle wiring now. I wanted to just cut out the speaker but I couldn't reach it. Nasim - 0 Nissan Atlas - 1
@WERKSTATT779 күн бұрын
I finally figured it out, it'll be in the final bow episode
@Nas_Atlas9 күн бұрын
Oh ya those little jap tow trucks are nice. Unfortunately it looks like it uses split rims. I shed many tears over getting stuck with those type of rims. Slow car fast is the way to go. Jay Leno just did a short about blowing past a cop in a vintage shitbox only to find out he wasn't speeding. I've taken a couple rides in the electric Commuta car of Simone Giertz "Cheese Louise" fame and you feel like you will die at any speed and it gets more looks than a cybertruck. Very very fun.
@Nas_Atlas9 күн бұрын
Oh I like that! Make sure the metal bits under the dash are silver. It's a nightmare under there even for regular sized humans.
@D.AmbroseАй бұрын
Nothing wrong with a classy little e30
@IseekoutthetruthАй бұрын
Maybe The Door Switch Is Whats Shorting Out, Since it Stops the Window When Pushed in. Your Del Sol Series Was Awesome, I Came Across it the Day I Bought My Son's 1993 Del Sol, And I Learned A lot About This Honda From Watching Your Series.
@WERKSTATT77Ай бұрын
Yeah for some reason the power window relay coil is grounded through the door switch, somewhere along its history the wiring got mixed up
@-Scraps-Ай бұрын
Where did you pick up the plastic bits and valance for the front?
@WERKSTATT77Ай бұрын
they all came from FCP Euro
@bahiyyihdotcomАй бұрын
Good fixin'. Nice ending!
@IseekoutthetruthАй бұрын
Love Them Wheels.
@Kurzhaar-alpakaАй бұрын
Can anyone tell me, what are this rims?
@WERKSTATT77Ай бұрын
M.technica 16x8
@josuegutierrez2383Ай бұрын
Is the front bumper from garagistic? If so, did you paint it?
@WERKSTATT77Ай бұрын
no this is the oem one from Japan, on the 320i it just came all black, but this one has been painted with sem trim black to deal with the fade
@cesarcesarpires2 ай бұрын
What Will happen to the car?
@WERKSTATT772 ай бұрын
Still for sale, but I’m not setup for such a large restoration
@Nas_Atlas2 ай бұрын
not everything needs to made out of metal.
@Iseekoutthetruth2 ай бұрын
I'm Still Here.
@Nas_Atlas2 ай бұрын
You gotta do the little things
@WERKSTATT772 ай бұрын
so much little stuff
@mwcrilly2 ай бұрын
What is your location, if US, where did you get those euro fenders? I need some.
@WERKSTATT772 ай бұрын
the whole car is actually from Japan, which is almost identical to the euro specs..
@Iseekoutthetruth2 ай бұрын
Those Are Some Cool Wheels.
@Iseekoutthetruth2 ай бұрын
Nice BMW, To Bad Its Not Right Hand Drive.
@Iseekoutthetruth2 ай бұрын
This Was A great Series, I Have learned A lot just From These Videos, The Dash Removal Is Good To Know.
@Iseekoutthetruth2 ай бұрын
Are You The 1 Making The 3D Printed Parts?
@WERKSTATT772 ай бұрын
Unfortunately no, but I think the link is in the video for the guy that does
@Iseekoutthetruth2 ай бұрын
I Have been Binge Watching This Serious, Pretty Good So Far. I Always Thought You Had To Lift The Body Up To Get The Motor out From Underneath. I Just Bought A 93 Del Sol For my Son And We Have been Working On It.
@WERKSTATT772 ай бұрын
Happy to hear you’re enjoying it
@joshmcgowan42 ай бұрын
Love it, I want a BMW now.
@WERKSTATT772 ай бұрын
Always nice to affect people in a negative way financially
@Nas_Atlas2 ай бұрын
nerds 😂😂
@WERKSTATT772 ай бұрын
this is correct
@bahiyyihdotcom2 ай бұрын
Beautiful intro with the cover coming off. Love the chit chat with the bros and the technical stuff at the end.
@WERKSTATT772 ай бұрын
Thanks
@joanbobyn97722 ай бұрын
Pick different background music.
@WERKSTATT772 ай бұрын
Yeah the lofi samurai playlist is getting long in the tooth. Can be tricky to find good free music.
@Nas_Atlas2 ай бұрын
What! I thought the other side had a crunchy bearing? So the old hub had screw in lugs and the new hub was push in type?
@WERKSTATT772 ай бұрын
the oem used wheel bolts rather then studs, this car was converted to studs. I was expecting them to be press in studs, but was happy to see they were thread in. I mostly just film the drivers side because there's much more room in the garage on that side. we did do both front wheel bearings though.
@MrMolgu3 ай бұрын
I’m confused now, what does JDM mean? And which cars a JDM??
@WERKSTATT773 ай бұрын
Japanese domestic market, this car was imported from Japan and was sold new in Japan and has a few little things that were specific to the Japanese market, maybe just the engine bay labels.
@Nas_Atlas3 ай бұрын
In a different life I had a Delorean clutch slave cylinder with the same problem. The fix was to drop a little crush coupling in the space.
@joanbobyn97723 ай бұрын
Aww so sad to see Clancy go......my old friend....
@Nas_Atlas3 ай бұрын
In your defense I have nearly smashed up at least three times on those yield merges because of shit like that. Those corners are a fucker and i get the appropriate amount of anxiety now. Also I drive as slow as a geneological table in the old testament.
@WERKSTATT773 ай бұрын
Haha
@OldSols3 ай бұрын
sir .... this doesn't look like a del sol
@WERKSTATT773 ай бұрын
Right?!
@user-fb6ol9tl7s3 ай бұрын
it just feels/sounds like you not know at all about bmws!?
@WERKSTATT773 ай бұрын
Sorry you feel that way.
@user-fb6ol9tl7s3 ай бұрын
@@WERKSTATT77 I'm sue you do it just doesn't convey to me in this vid ... but take it with salt grain or not. best wishes
@caydenforrest6103 ай бұрын
👌
@bahiyyihdotcom3 ай бұрын
Anything worth doing is worth doing twice. I liked the tire shelf build. Also, nice music by Lukas!
@WERKSTATT773 ай бұрын
Yeah props to Lukas!
@bradhorner3 ай бұрын
I kind of imagine driving one of these with a manual transmission. This guy does more or less what I would do. kzread.info/dash/bejne/Y6mhucptp9DYXco.htmlsi=2vjD-D4KnamlqQV6
@joshmcgowan43 ай бұрын
I did the exact same thing with the tire rack in my garage.
@WERKSTATT773 ай бұрын
Yeah tires are such a pain to store
@Nas_Atlas3 ай бұрын
A project so nice you do it twice! The garage is shaping up into a checklist crushing machine
@WERKSTATT773 ай бұрын
Pretty much!
@McGowanJoel13 ай бұрын
Love that e30, sweet cop car too!
@WERKSTATT773 ай бұрын
The best!
@Nas_Atlas3 ай бұрын
I like where you're going with this one! Since you didn't write it off on the trip home you can slowly convert it into a rusted out rat rod? Glad you made it through the rookie build!
@WERKSTATT773 ай бұрын
Haha no rust here, this one is super clean thankfully. Done enough body work for a while.
@bahiyyihdotcom3 ай бұрын
A new project! Niiice.
@WERKSTATT773 ай бұрын
You know it!
@McGowanJoel13 ай бұрын
Such a nice chassis and find! So cool it’s JDM and had the stickers to match Love the slick top too!
@WERKSTATT773 ай бұрын
Thanks 👍
@ef_baum53073 ай бұрын
dope... haha that didn't take long!
@WERKSTATT773 ай бұрын
Gotta keep it all going! 😉
@joshmcgowan43 ай бұрын
Dang! Glad you are ok. Looking forward to the next project car.
@WERKSTATT773 ай бұрын
yeah me too.
@jimbosbattles4 ай бұрын
damn
@xxxtarnationn4 ай бұрын
so sad😢
@Thermosmcjug4 ай бұрын
Hey Josh, as someone who has been presented with countless "sweep the leg" events from health issues to other unforeseen hurdles, hoping this doesn't feel too defeating. We're here with you man - if you need any help with the next build, let me know if I can help in any way! Onward and upward my dude.
@WERKSTATT774 ай бұрын
Thanks, yeah always open to help.
@Nas_Atlas4 ай бұрын
There's a certain invincibility that comes from a fully tuned machine. It must be ignored which unfortunately defeats the point of getting it there.
@WERKSTATT774 ай бұрын
Just gotta keep going forward…..except in this case stopping would have been better.
@gwynn11044 ай бұрын
Wtf! 😳
@wall71034 ай бұрын
This is my worst fear with my project... Ugh, feels terrible. Glad you're OK
@WERKSTATT774 ай бұрын
Yeah if you have something special try to save it for sunny Sundays
Пікірлер
Nice 👍
All I do is downsize my stuff and it still grows to fill all available space.
I can't have a vehicle making dinging noises from the door or seatbelt open so I bypassed the door switch and then my fog light switch stopped working. I'm retired from vehicle wiring now. I wanted to just cut out the speaker but I couldn't reach it. Nasim - 0 Nissan Atlas - 1
I finally figured it out, it'll be in the final bow episode
Oh ya those little jap tow trucks are nice. Unfortunately it looks like it uses split rims. I shed many tears over getting stuck with those type of rims. Slow car fast is the way to go. Jay Leno just did a short about blowing past a cop in a vintage shitbox only to find out he wasn't speeding. I've taken a couple rides in the electric Commuta car of Simone Giertz "Cheese Louise" fame and you feel like you will die at any speed and it gets more looks than a cybertruck. Very very fun.
Oh I like that! Make sure the metal bits under the dash are silver. It's a nightmare under there even for regular sized humans.
Nothing wrong with a classy little e30
Maybe The Door Switch Is Whats Shorting Out, Since it Stops the Window When Pushed in. Your Del Sol Series Was Awesome, I Came Across it the Day I Bought My Son's 1993 Del Sol, And I Learned A lot About This Honda From Watching Your Series.
Yeah for some reason the power window relay coil is grounded through the door switch, somewhere along its history the wiring got mixed up
Where did you pick up the plastic bits and valance for the front?
they all came from FCP Euro
Good fixin'. Nice ending!
Love Them Wheels.
Can anyone tell me, what are this rims?
M.technica 16x8
Is the front bumper from garagistic? If so, did you paint it?
no this is the oem one from Japan, on the 320i it just came all black, but this one has been painted with sem trim black to deal with the fade
What Will happen to the car?
Still for sale, but I’m not setup for such a large restoration
not everything needs to made out of metal.
I'm Still Here.
You gotta do the little things
so much little stuff
What is your location, if US, where did you get those euro fenders? I need some.
the whole car is actually from Japan, which is almost identical to the euro specs..
Those Are Some Cool Wheels.
Nice BMW, To Bad Its Not Right Hand Drive.
This Was A great Series, I Have learned A lot just From These Videos, The Dash Removal Is Good To Know.
Are You The 1 Making The 3D Printed Parts?
Unfortunately no, but I think the link is in the video for the guy that does
I Have been Binge Watching This Serious, Pretty Good So Far. I Always Thought You Had To Lift The Body Up To Get The Motor out From Underneath. I Just Bought A 93 Del Sol For my Son And We Have been Working On It.
Happy to hear you’re enjoying it
Love it, I want a BMW now.
Always nice to affect people in a negative way financially
nerds 😂😂
this is correct
Beautiful intro with the cover coming off. Love the chit chat with the bros and the technical stuff at the end.
Thanks
Pick different background music.
Yeah the lofi samurai playlist is getting long in the tooth. Can be tricky to find good free music.
What! I thought the other side had a crunchy bearing? So the old hub had screw in lugs and the new hub was push in type?
the oem used wheel bolts rather then studs, this car was converted to studs. I was expecting them to be press in studs, but was happy to see they were thread in. I mostly just film the drivers side because there's much more room in the garage on that side. we did do both front wheel bearings though.
I’m confused now, what does JDM mean? And which cars a JDM??
Japanese domestic market, this car was imported from Japan and was sold new in Japan and has a few little things that were specific to the Japanese market, maybe just the engine bay labels.
In a different life I had a Delorean clutch slave cylinder with the same problem. The fix was to drop a little crush coupling in the space.
Aww so sad to see Clancy go......my old friend....
In your defense I have nearly smashed up at least three times on those yield merges because of shit like that. Those corners are a fucker and i get the appropriate amount of anxiety now. Also I drive as slow as a geneological table in the old testament.
Haha
sir .... this doesn't look like a del sol
Right?!
it just feels/sounds like you not know at all about bmws!?
Sorry you feel that way.
@@WERKSTATT77 I'm sue you do it just doesn't convey to me in this vid ... but take it with salt grain or not. best wishes
👌
Anything worth doing is worth doing twice. I liked the tire shelf build. Also, nice music by Lukas!
Yeah props to Lukas!
I kind of imagine driving one of these with a manual transmission. This guy does more or less what I would do. kzread.info/dash/bejne/Y6mhucptp9DYXco.htmlsi=2vjD-D4KnamlqQV6
I did the exact same thing with the tire rack in my garage.
Yeah tires are such a pain to store
A project so nice you do it twice! The garage is shaping up into a checklist crushing machine
Pretty much!
Love that e30, sweet cop car too!
The best!
I like where you're going with this one! Since you didn't write it off on the trip home you can slowly convert it into a rusted out rat rod? Glad you made it through the rookie build!
Haha no rust here, this one is super clean thankfully. Done enough body work for a while.
A new project! Niiice.
You know it!
Such a nice chassis and find! So cool it’s JDM and had the stickers to match Love the slick top too!
Thanks 👍
dope... haha that didn't take long!
Gotta keep it all going! 😉
Dang! Glad you are ok. Looking forward to the next project car.
yeah me too.
damn
so sad😢
Hey Josh, as someone who has been presented with countless "sweep the leg" events from health issues to other unforeseen hurdles, hoping this doesn't feel too defeating. We're here with you man - if you need any help with the next build, let me know if I can help in any way! Onward and upward my dude.
Thanks, yeah always open to help.
There's a certain invincibility that comes from a fully tuned machine. It must be ignored which unfortunately defeats the point of getting it there.
Just gotta keep going forward…..except in this case stopping would have been better.
Wtf! 😳
This is my worst fear with my project... Ugh, feels terrible. Glad you're OK
Yeah if you have something special try to save it for sunny Sundays