Пікірлер

• 
  @NeoSoulquarianАй бұрын

  Fantastic video. Right to the point. ❤

• 
  @Trumpetman123458 ай бұрын

  This first time I cleaned my Bach I put the valves in the right casing but they were backwards

• 
  @johnfurman8211 Жыл бұрын

  Blue Juice is good for clean valves. If they're dirty the detergent properties in it will flush out grime. The oil and grime mix will cause sticking. It's a good oil but I think it smells bad.

• 
  @basemsalha34252 жыл бұрын

  🖒🖒💚

• 
  @WayLAN_Media2 жыл бұрын

  Thanks

• 
  @paulgrimm68502 жыл бұрын

  My new Bach was dirty with compound

• 
  @zacheryreeves2 жыл бұрын

  My band director told me to flush out my valves but I don't know how to. Is there anyone that can help?

• 
  @davidbostock69332 жыл бұрын

  Get a new band director, or maybe watch the video.

• 
  @lindamorgan26782 жыл бұрын

  Excellent ! Thank you so much saved a long trip to the city and solved 2 problems on my new pawn shop Clarinet

• 
  @evgeniiaburri26792 жыл бұрын

  thank you very much, I had a problem with B low in my clarinet, and with your video I find a solution! :)

• 
  @lambertj.28922 жыл бұрын

  Is there no sound with this video?

• 
  @QCSDTV3 жыл бұрын

  So helpful. Thank you for taking the time back in 2013 to do this. It's still helping others like me :-)

• 
  @francistaylor50973 жыл бұрын

  Amazing! I'm now feeling smug because I've fixed my A and Bb clarinets.

• 
  @artifxcixl86844 жыл бұрын

  Thank you so much!

• 
  @FanTrombone4 жыл бұрын

  I have a sousaphone that has over 300 dents in it...everywhere! I was going to try and remove them myself but after watching you work - no way! Great Job!

• 
  @eduardoangelgaribaygiordan65464 жыл бұрын

  What did you do here? 0:37 I didn’t quite catch it...

• 
  @JonathanArcangel4 жыл бұрын

  push the key down while pushing up the other thing gently

• 
  @eduardoangelgaribaygiordan65464 жыл бұрын

  @@JonathanArcangel Thank you so much

• 
  @patriciacastaneda69404 жыл бұрын

  good

• 
  @darrellhowell62194 жыл бұрын

  How to i fix my D key

• 
  @toniharris5054 жыл бұрын

  I lost my screw what else can i use

• 
  @shashankiyer86174 жыл бұрын

  2:16:(:(:(:(:(:(:(:(:(:

• 
  @alialmazmi88094 жыл бұрын

  WOK UUUUUUUUUU XD

• 
  @IWin024 жыл бұрын

  What do I do if the felt is starting to fall off? Can I stick it back on somehow?

• 
  @scottyrproductions98224 жыл бұрын

  Can somebody please help I don't have one of those Rods you put the cloth on

• 
  @JohnsonSmithson4 жыл бұрын

  Use a rod with cloth wrapped around it, I used a stick that holds flower and cloth around it and the job was done

• 
  @davidbostock69332 жыл бұрын

  Gun cleaning kits have similar.slotted rods.

• 
  @lenzotrumpet5 жыл бұрын

  Problem with The Cheesecloth is that the little fibers tend to break off the cheesecloth and then into the pistons or get in between the valve casing and the pistons cheese cloth "esta Merda"

• 
  @davidbostock69332 жыл бұрын

  I spell cheese cloth "paper towel" when cleaning is involved.

• 
  @lenzotrumpet Жыл бұрын

  @@davidbostock6933 paper towel is even worse order from eBay Yamaha polishing gauze it will not scratch your pistons like paper towel does.

• 
  @richrossirepairslessons31005 жыл бұрын

  You forgot to do something...

• 
  @sashapoopypants16163 жыл бұрын

  What did they forget?

• 
  @richrossi56463 жыл бұрын

  Forgot to bend the spring ends and then cut off.

• 
  @mooshoe19495 жыл бұрын

  🖒

• 
  @BluzLover725 жыл бұрын

  Where did you get the MDRS mount for dent machine? I have not seen that. Would love to get one for mine. Nice vid.

• 
  @leahlau15915 жыл бұрын

  I start middle school next year and decided to take band. (Trumpet) I'm using an old trumpet so this video was really helpful with the cleaning. Thank you!

• 
  @gezbit4 жыл бұрын

  heah

• 
  @owenlover5 жыл бұрын

  2:22 ;0; that key your adjusting might or may not be uhh kind of umm well bent all on top of the one beside it preventing me of playing any note besides F and G

• 
  @buckaroobonsi5555 жыл бұрын

  Blue Juice is terrible stuff. It has too many additives and builds up this nasty blue crystalline stuff. It does not play nicely with other oils so if you run out and try to borrow some oil from someone in the section it often will not work right until you clean the Blue Juice out wash the horn and start over. A lot of guys that buy old beat up 3 valve baritones and tuba's will use a 50/50 mix of Blue Juice and 3in1 general purpose oil. I have seen so many trumpets where the valve stems are glued in place with teal colored crystallized Blue Juice residue.It was a Horn-U-Copia recipe long ago. Blue Juice creates more problems than it solves. The more additives you put into an oil the less lubricity it has because the oil is what lubricates not the additives. At the most you might want to add a wetting agent and not much more. Oil does not interact much with things it is the additives that cause issues based on a persons body chemistry not the oil itself. The most important thing to stop stinking is periodicly cleaning the piston and the bore. Fluiding the horn with oil is a band aid fix for a dirty horn. Junk builds up in the imperfect surfaces of the piston and the bore. When you see oil bounce off the piston or run right off with out wetting the piston or bore that is a sign that those surfaces are deeply dirty or valve oil is poorly designed!

• 
  @Metal-Possum5 жыл бұрын

  Rotating the valve inside its casing is never encouraged. Sure, you just cleaned it, but in the event of some debris, grit, or sharp edges in there, you'll score the valve around its circumference, and find yourself with potentially major difficulties some time in the future. It's good practice to only insert the valve straight in or out, the direction it is intended to travel. If you do score the valve this way, it is much less likely to be a trap for oil and other particles, and if it is, it won't fight against the direction the valve wants to go.

• 
  @mayramartinez82425 жыл бұрын

  YESSS THANK YOU SO MUCH

• 
  @tashia66965 жыл бұрын

  Nooo audio

• 
  @blebfleb23035 жыл бұрын

  Anyone know how to sort out mixed up valves??? please respond!

• 
  @BandPotato5 жыл бұрын

  6 possible combinations ? (aside from numbers on the valves) I played 123 then i shifted 23 132 then i shifted back to 123 and traded 1 and 2 213 231 whichever sounded best was correct UNLESS the valve guide is off on any of them, then you get a fuzzy sound. That's why I found this video, to remember how to do this.

• 
  @Metal-Possum5 жыл бұрын

  Just observe the holes and where they go, and put them into the right valve casing accordingly. I'm guessing because they never taught you this in high school, you never had the mental capacity to figure it out for yourself? On many instruments, the valves are even numbered.

• 
  @lonzoball57586 жыл бұрын

  What's the tuning slide on that instrument I have i think the same one but I don't know which ones the tuning slidr

• 
  @Metal-Possum5 жыл бұрын

  Sorry to sound awfully rude, but you sound particularly thick. The main tuning slide on any brass instrument is the one that's on the main length of tubing, and not on one of the extensions of tubing attached to the valve(s).

• 
  @cmccombs236 жыл бұрын

  Thx needed that so badly #Bighelp

• 
  @chipsmash69216 жыл бұрын

  Mine just not making sound at all but I know how to play it

• 
  @Gator16996 жыл бұрын

  Glue some leather on those plier's it save you from marking the key.

• 
  @spicy87106 жыл бұрын

  What happens if the valve doesn’t click and how do I fix it ? I tried oiling it more, and making sure it was facing the right way but nothing worked. Also, the spring inside the valve, what if it falls out? Is there a certain way to put assemble it back in? PLS HELP ME

• 
  @duolingobird92446 жыл бұрын

  Rachel Y! You're probably okay by now, but if the spring falls out simply put it back in. If the valve doesn't click in the right place, try putting it in the wrong place and twisting it until it gets to the right place. It should fall into place and you can then screw the valve on. If it doesn't fall into place, you'll have to get it checkout out with an instrument repair shop.

• 
  @oldtimedrumcorps6 жыл бұрын

  Chopsticks wound with soft no lint cloth work great on valve tubes . La Tromba syn oil , best on mkt Lasts long but dont mix and clean off valves before converting

• 
  @didelox16 жыл бұрын

  thank you so much, my a key was all weird and the angle of the camera hinted me the exact position. Now i don't squeak anymore

• 
  @thomasma81796 жыл бұрын

  5-6 drops? thats a litlle overkill...

• 
  @ignatiusDOWN6 жыл бұрын

  I use Hetman's Synthetic, great stuff

• 
  @abrasal14606 жыл бұрын

  Exactly what I need man, except I lost the screw, that's a bill for me now ;-;

• 
  @torreybrave98367 жыл бұрын

  thank you so much for this! It helped me a lot.

• 
  @tonypark26017 жыл бұрын

  Thank you very much for this video. Very simple yet a lot of information.

• 
  @vigidriver62817 жыл бұрын

  Always clean a new brass instrument thoroughly before you play it for any length of time. There will be a lot of construction "dust" inside the instrument. Do not mix Synthetic Oil with Petroleum Oil or you will likely create one gummy mess. Choose one type of Oil and stick with it.

• 
  @dougmoran33407 жыл бұрын

  I don't hear any sound with this video. (Other videos on KZread all operate OK for me.) The video covers a topic that I a desperate to know more about, as the screws on my tenor needs attention. Is there any way the sound can be added ?

• 
  @petevasquez7764 жыл бұрын

  Whats the use of showing if you have no sound.

• 
  @AnthonyUFOLundell7 жыл бұрын

  Hi. this brings up my question; the circular ring part your bending isn't centered on the pin (on my Sax). when I center it, the mouth piece and all is pointing left. is that normal, or something I can adjust?

• 
  @mr.coolypoody16465 жыл бұрын

  Hey! I've been having the same problem, my octave key faced a certain direction and it was difficult for me to transition from some high notes. There should be a screw on the octave key that you can tighten, try untightening that screw, placing the key in the right direction, then screwing the screw back in. Sorry if that doesn't help

• 
  @user-vm6iz2kb5w7 жыл бұрын

  لو الطريمة صوتها كاتم كيف أحل هذه المشكلة.وكيفية تقفيل اماكن خروج الهواء من النفس

• 
  @veganschmegan8 жыл бұрын

  Great video. Thank you!

• 
  @astroviv73578 жыл бұрын

  I had a brand new trumpet and im a new trumpet player, after playing it for a while one of the valves got stuck and I found this video. Thanks so much for the video!