Пікірлер

• 
  @Lostprovince23194 күн бұрын

  Can i run these batteries in series safely please i want to run my 72v motor with two 40v in series without causing a dumpster fire ive already taken it for a 35 minute test ride with no malfunction and the batteries drained one bar at a time on each battery which to me seems pretty evenly discharging i just need some input please and thank you

• 
  @showandtelltechnology4 күн бұрын

  I've never ran them in series so I don't know.

• 
  @sahayasabnaashmysenthil21715 күн бұрын

  First

• 
  @ericstewart474016 күн бұрын

  Only 1 thing i notice is that your plate is hooked up behind your safety chains. I believe that the safety chains go under the plate.

• 
  @001yohan419 күн бұрын

  Talk too much, no demo of opening and closing. Don't know whether it is successfully installed.

• 
  @mikelazz26 күн бұрын

  Great video! Thanks for sharing the information.

• 
  @chriswatson363326 күн бұрын

  Hope you found it helpful.

• 
  @tomalberte415127 күн бұрын

  Scratches porcelain tile

• 
  @marcmeyers4156Ай бұрын

  Proceed with caution. If you have any extra tiles left over from the install, try it on one of those first. I managed to strip off the calcium, glazing and color almost all at the same time. On the plus side, it doesn't take long to figure out that it doesn't work for your particular tiles, so there is that...

• 
  @Vynx1690Ай бұрын

  2 questions, how fast does it go? And where would I connect a new throttle if I were to get one?

• 
  @chriswatson3633Ай бұрын

  It's slightly faster than stock. I think stock was 17mph. The throttle connection must plug into the controller.

• 
  @Vynx1690Ай бұрын

  @@chriswatson3633 ok thank u

• 
  @rowaldtilborg2307Ай бұрын

  Keep it up!

• 
  @lynncalvello-perez2869Ай бұрын

  What do you suggest using on waterfall rocks, which are man made?

• 
  @chriswatson3633Ай бұрын

  I can't help with that. I don't have those.

• 
  @gwennykin4332Ай бұрын

  Where did u order this part?

• 
  @chriswatson3633Ай бұрын

  BMW dealer

• 
  @wesm6121Ай бұрын

  Thanks Just moved here and the windows would not lock, I had to pick up my window turns ou it was off track alittlebit after that the locked were engaged thank you very much

• 
  @ericmoss6110Ай бұрын

  I don't have a shower with a hose, just a showerhead directly screwed onto the pipe coming out of the wall. What fitting should I use?

• 
  @MrMrjaureguiАй бұрын

  just ordered the opener. I greatly appreciate the video. Thanks!

• 
  @chriswatson3633Ай бұрын

  Ours is still working great. I hope you love yours too.

• 
  @user-nn3iq3xw9pАй бұрын

  I was doing 29 things at once and routinely put the top on. I realized after a few minutes what I had done and stopped it. But the lid was wet and there was a couple drops in glass jar. I then cleaned it correctly. Co you think it’s safe to use. The citric acid jar says where protective eye wear and gloves. So I’m worried it will ruin future batches of water.

• 
  @MrJayhawk1972Ай бұрын

  Thanks, my problem exactly. Going to work on it right now!

• 
  @wesm6121Ай бұрын

  SAME mine were off track in new apartment i was scared my neice could open it

• 
  @REZ150Ай бұрын

  What year is your X5? My wife is having the same issue. You think her 2016 X5 would have the same part number ?

• 
  @showandtelltechnologyАй бұрын

  This one is older. The part number will be different. The dealership can tell you the part number you need.

• 
  @Nonyabusiness911Ай бұрын

  I would’ve be curious why you have the deposits. My pool is only a year old and so far no,problems. I definitely want to prevent this.

• 
  @showandtelltechnologyАй бұрын

  It's our terrible AZ water.

• 
  @msjtathe2 ай бұрын

  Thank you! Mine wouldnt open and the lock mechanism had fallen off but following your instructions still worked

• 
  @showandtelltechnology2 ай бұрын

  So glad it helped you!

• 
  @levipankey2 ай бұрын

  Is there any speed increase?

• 
  @showandtelltechnology2 ай бұрын

  Yes. A slight one.

• 
  @issys212 ай бұрын

  Amazing

• 
  @coronabuster36112 ай бұрын

  Great video, thanks!

• 
  @tee-np8ti2 ай бұрын

  do i have to use to barterys

• 
  @DORAYMEendeavor2 ай бұрын

  The wiring part isn't explained very well in the instructions. Nor have you explained attaching the wires to the motor electric board here. How did you attach the 3 wires to the mother board? Do you have to use the set screws? it needs a tiny screw driver?

• 
  @88adrian252 ай бұрын

  I keep getting L2 error it closes just fine but i cant make it open

• 
  @Eattrvlroll2 ай бұрын

  Just did mine. Thanks for the video.

• 
  @showandtelltechnology2 ай бұрын

  glad it helped!

• 
  @760phillip3 ай бұрын

  Great informative video. Keep em coming thank you.

• 
  @mauricecohen38303 ай бұрын

  Don't try this on glass tiles.

• 
  @bizi7863 ай бұрын

  I changed them on my F10 watching your video it was solid with no play or anything but a day later it broke again, 😢 do u reckon it's the actual plates fault, or rivets used or seats just no support anymore? I used the AliExpress for back plates so not original BMW part

• 
  @showandtelltechnology3 ай бұрын

  you could tell by looking at the plate. If the plastic broke around the rivets then it's definitely a faulty part.

• 
  @Coolyouser3 ай бұрын

  Hi😊

• 
  @sweetbeep3 ай бұрын

  Hi, can you give me the link to that video that shows us how to use the app? The link in your description is not clickable. Thanks!

• 
  @commonsenseisdeadin20243 ай бұрын

  I love how people leave negative reviews because "the instructions are useless"..... If someone needs instructions that hold their hand inorder to install, they have no business installing it! When did "installation instructions" become a requirement? A "user manual", yes..... There's a reason there are businesses that exist to install things like garage doors, gates, etc, etc.... For instance, car parts don't come with installation instructions..... My point is; if you don't have some knowledge or you're uncertain if you have the skills to figure it out.... Maybe you shouldn't do the install! Reviews are for the product, not shipping damage from the courier, not the instructions! Be glad there's any instructions! Typically they have basics and "trouble shooting" tips! /Rant😂 I like the helpful tips and actual performance review!

• 
  @Sundowner-hz6gb3 ай бұрын

  I don't think you said what PSI should be used?

• 
  @fredrickriehl89534 ай бұрын

  Great job 👏🏼

• 
  @chriswatson3633Ай бұрын

  thank you!

• 
  @roberthansen98764 ай бұрын

  Good tips. Actually, brand new they are 1/2 what they say. After adding 4 x 50 to get 410 total, you really get about 205. Which is enough for me on everything but deadlifts and squats. It is hard to beat it up on this since it is so versatile.

• 
  @showandtelltechnology4 ай бұрын

  I don't think so. I've never had any battery issues.

• 
  @victorlani114 ай бұрын

  Did you need low voltage cutoff switch to prevent battery from over discharging?

• 
  @fire808surf4 ай бұрын

  Is the dial called a potentiometer? Also, how did you fit 2 40v? Thanks

• 
  @showandtelltechnology4 ай бұрын

  I only fit one 40v battery on the quad. I put two in the MX650 dirtbikes. I don't know what the dial is called. I bought it from the guy who makes the controller and I don't recall a word like that.

• 
  @TheGvantell4 ай бұрын

  Chris, thank you! what is the part number of the cover that you have on order?

• 
  @showandtelltechnology4 ай бұрын

  I'm afraid I don't remember. That was many years ago.

• 
  @kippielapan80364 ай бұрын

  P r o m o s m

• 
  @DamirBabic-xc5po5 ай бұрын

  Princessa 👑😍💝🦋🌹🌷⚘️💖💗💓💞💕❤

• 
  @jimmoca21825 ай бұрын

  Everyday the gate limit switches worked and now its just crashing.

• 
  @showandtelltechnology5 ай бұрын

  Move them a little and see if it helps.

• 
  @eriklopez18215 ай бұрын

  Could you send me link where you got new battery mounts for Ryobi batteries please?

• 
  @showandtelltechnology5 ай бұрын

  amzn.to/49YudXL

• 
  @showandtelltechnology5 ай бұрын

  Solar Eclipse Glasses: amzn.to/49SnVIT

• 
  @user-qb3tk6di4f5 ай бұрын

  Ordered this same automatic opener today. If I’m doing a very similar gate except only 8ft wide in grass. Can it still be installed without a track? Or is a wheel or track a must need?

• 
  @alexsalazar15695 ай бұрын

  Im no expert but by what ive seen and heard from many people, you need a track so it doesnt go off course. Eventually it will and it can potentially damage your gate motor since the magnets wont be aligned anymore which will make the motor think its not done closing/opening and will keep going and damage it

• 
  @showandtelltechnology5 ай бұрын

  Nothing connects to the track but it does seem like if your gate could get out of position it might cause a problem. The chain runs through three gears and if the alignment of the chain gets too off it might bind.

• 
  @showandtelltechnology5 ай бұрын

  Twist Whisk: amzn.to/4bMgGUF

• 
  @showandtelltechnology5 ай бұрын

  The Amazon product link is: amzn.to/48sBNsp

• 
  @robertcassey40145 ай бұрын

  Thank you!

• 
  @showandtelltechnology5 ай бұрын

  Glad it helps.

• 
  @brianmccarthy13225 ай бұрын

  I added the extra 50lb rods bit soon enough was benching the full 410lbs. Sold it! Bought a squat rack, powerlifting bar and 4 each of 45-35-25-10lb plates and 2 each of 5 and 2.5lb. I am not and will never bench a true 410 lbs but at least I know the truth and that is power in itself.

• 
  @MuzataCableRailingLEDChannel5 ай бұрын

  Very pertinent and adoptive comments! We will continue to improve ourselves and strive to give users the most perfect experience!