Пікірлер

• 
  @carlfgauss90526 сағат бұрын

  Thank you.

• 
  @Britec0912 сағат бұрын

  Thanks for sharing Tim

• 
  @Truthall16 сағат бұрын

  why wouldnt you have swapped out the video card prior to assuming it may be a dead motherboard or CPU? thats a lot of diagnostics bypassed, that is a real rookie error right there...you went round all the doors bar that one...the rest of the video was ok but anyone watching will be reliant on you to work through all the proper stages before reaching a decision to remove the CPU or motherboard

• 
  @ChuckNorris-lf6vo2 күн бұрын

  Good job.

• 
  @HanakaPanenka5 күн бұрын

  Great Mr.Tim. I have very small question, my Lenovo legion5's fan spinning for short time when my laptop bootup and then stop for little bit and then work normally , is that normal process or abnormal and my fans should always run from bootup to shutdown without stopping

• 
  @TimsComputerRepair4 күн бұрын

  The fans kick on when the chip reaches a certain temp.

• 
  @richteritwan6 күн бұрын

  Dead/Problem memory channel. Could be at the CPU, the board between, or the memory module. Test CPU and RAM.

• 
  @AGUMEGIDEON6 күн бұрын

  The command is not visible!!

• 
  @migsycee6 күн бұрын

  Nice One Tim , i hate stripping them all in ones down, at least the Dell one is better made than the HP equivilant where you have to remove the screen to get to the fan and motherboard. Keep up the good work Tim

• 
  @TimsComputerRepair6 күн бұрын

  Thanks for watching.

• 
  @JackFri276 күн бұрын

  can usb enclosure be plugged into a windows PC ?

• 
  @TimsComputerRepair6 күн бұрын

  Yes. You can read but can't wright.

• 
  @user-yn8mz5bf9y7 күн бұрын

  It's not a plate it's a ground shield

• 
  @tonywise1987 күн бұрын

  Gadgets! Certainly more useful than the current rubbish "Widgets".

• 
  @TimsComputerRepair6 күн бұрын

  Yep

• 
  @laurojimenez95417 күн бұрын

  What programs do you use to remove anti virus and recover files

• 
  @TimsComputerRepair6 күн бұрын

  I use Tech Tool Store and Mini Tool

• 
  @MyClientNow8 күн бұрын

  12 hours of flipping sh*t and you Tim found the solution to this problem. THANK YOU so much. This fixed my problem.

• 
  @TimsComputerRepair6 күн бұрын

  Great!

• 
  @Tactical_Hotdog10 күн бұрын

  Used this for my GFs laptop, ordered some replacement fans tonight, wish me luck for tomorrow 😅

• 
  @TimsComputerRepair6 күн бұрын

  Hope things go well.

• 
  @Tactical_Hotdog6 күн бұрын

  @@TimsComputerRepair oh, it did, flawlessly, thanks to your video.

• 
  @prashantshakya199810 күн бұрын

  many many thaks to you... you have literally saved me ✨✨

• 
  @TimsComputerRepair6 күн бұрын

  Great!

• 
  @anaslolien780011 күн бұрын

  question what happen if you replace a fan that doesnt match the number of the fan?

• 
  @gyokuto-jo12 күн бұрын

  i've been researching for months and today i'm finally putting together an online order for my start-up tools and supplies. this video has been by-far the most helpful and informative. you are appreciated, many thanks! 🙏

• 
  @TimsComputerRepair11 күн бұрын

  Glad I could help!

• 
  @bondjovi459512 күн бұрын

  Just put my retro AT PC board into an ATX HP case. I got one screw to line up. Lol

• 
  @mitchwhite185913 күн бұрын

  My surface does not have recovered from a drive option.

• 
  @redblake6613 күн бұрын

  I thank GOD for your dissemination of knowledge and your straightforward teaching, brother, thank you also for assisting all who need your help with computers. You’ve earned a subscriber and someone who will further watch your videos for troubleshooting

• 
  @TimsComputerRepair11 күн бұрын

  I appreciate that

• 
  @yukinagato676113 күн бұрын

  So what is the largest ssd this computer can accommodate and what is the max ram if can take . In the case as you replaced a failed Hard drive where woudl you get the software to take it to out of box state ?

• 
  @jaswahn15 күн бұрын

  THANK YOU from the bottom of my sanity!! before this i was about to pack up my worldly belongings and become a hermit in the mountains..... lifesaver!!

• 
  @TimsComputerRepair14 күн бұрын

  Glad it helped!

• 
  @cjemmanuelrocena770916 күн бұрын

  i was so hopeful this was gonna be the answer for my problem but it didnt change 😢 to add though, im using a laptop not a pc so that could be another thing to troubleshoot. thank you, though! great vid i see it helped others a lot 👍🏻

• 
  @mbf616019 күн бұрын

  Had 16 gbs of ram figured a I’d do a simple ram upgrade of another 16 GBs of ram clocked at 3200mhz and what do I have a black screen 🤦🏾‍♂️

• 
  @poppijoni20 күн бұрын

  Thousand thanks. For some reason my iMac couldn't install the OS the traditional way but this worked perfectly.

• 
  @TimsComputerRepair20 күн бұрын

  Glad it helped

• 
  @wazihajannat400222 күн бұрын

  thnq u so muchhh

• 
  @OldManRobbo23 күн бұрын

  Loved the video Tim. My screen has been flickering and Im wondering if its the actual screen or the ribbon flex cable. Is there a way to find that out? The screen seems fine when it's not flickering but when it does, it goes bright and sometimes white (picture is good but colour/brightness/saturation changes). Cheers for any help given or not. Appreciate your amazing run through of the replacement.

• 
  @TimsComputerRepair20 күн бұрын

  It is the display that is the problem.

• 
  @OldManRobbo20 күн бұрын

  @@TimsComputerRepair yes the display. Flickering white lines and now has vertical lines and a bright "rising sun shape" at bottom middle of screen. I could email you a picture or video. If that would help.

• 
  @scottellis591124 күн бұрын

  Maybe needs molex to ?

• 
  @user-yh1ji5py9w24 күн бұрын

  Which command you write in comment box

• 
  @user-yh1ji5py9w24 күн бұрын

  Hi

• 
  @dazdealz464828 күн бұрын

  Ive been troubleshooting this dang blackscreen for 6 hours not even kidding. I switched monitors and display ports and Wham FIXED. If i told you the amount of videos ive watched on this issue you wouodnt believe me. You actually came up with the solution. My man 👋

• 
  @TimsComputerRepair26 күн бұрын

  Glad the video helped.

• 
  @NoHateJustLove_2929 күн бұрын

  Hi Tim, I have the same problem. EXACTLY the same problem. But there is another problem. The motherboard has no DP port nor HDMI port. Only VGA and USB ports. What could I do to try this out? (PC not mine, But from client.)

• 
  @TimsComputerRepair29 күн бұрын

  Maybe try a vga to hdmi adapter.

• 
  @phreaktorАй бұрын

  I have an 14m-ba013dx and I have all the mother board and WiFi card screws removed and there's something holding it in. Can't figure it out and I don't want to force it.

• 
  @dengdanielngor2599Ай бұрын

  Sir i need help

• 
  @michaelmyers8930Ай бұрын

  Great video. It would be helpful to state that in order to install OTHER versions, all you have to do is type SUDO and then drop the installer into the terminal window. That's a lot easier than typing that out.

• 
  @lorenzoguerra3377Ай бұрын

  Finding this video saved my day when I was about to give up. Thanks a lot!

• 
  @TimsComputerRepairАй бұрын

  Glad I could help!

• 
  @sleepwalker6825Ай бұрын

  Seems a decent Product Tim , But if it Doesn't clone to Boot State seems a bit pointless .. Cheers for the Vid

• 
  @darkmatter8650Ай бұрын

  Hey! t Tim.. I wiped my asus gl553ve laptop screen with brasso cleaner and now I have fade liquid spot on both side of it. I had several times dissemble it ,but I have less confidence about dissembling the monitor .What can I do accept leave it for few days and open it .I am physically disabled dependent person, so hard to going to shop. Can you give me a link who can help me provide hinge screw bosses 2 for HDD side and 1for fan side of my device?- From Bangladesh. Reply soon

• 
  @welshtony1Ай бұрын

  Cool product. Hopefully you figure it out. Maybe a update video if you do?

• 
  @TimsComputerRepairАй бұрын

  Maybe

• 
  @GregMАй бұрын

  It is strange that it will not allow one to clone M.2 SATA to M.2 NvME which is something that if dealing with an upgrade to a new system you might encounter. I wonder if the non booting is because Windows does not see the recovery partition at the end of the drive. I guess using partition manager software one could move the recovery partition to the end and add the additional free space to the existing partition. Macrium reflect does have an option in their software to fix non booting drives which I have used on several occasions.

• 
  @TimsComputerRepairАй бұрын

  Thanks for watching.

• 
  @TrevorodunneАй бұрын

  The clone failed because of TPM and secure boot using Windows 11.

• 
  @TimsComputerRepairАй бұрын

  Thanks for watching.

• 
  @paulwarner5395Ай бұрын

  Thanx for the video. Did you try going to the Windows repair mode and see if Windows could repair it's self??

• 
  @TimsComputerRepairАй бұрын

  Thanks for commenting.

• 
  @klaus-richtergobel5124Ай бұрын

  The video is still relevant today! Thank you for your video. I just used it to guide me through to get to my fans for cleaning.

• 
  @TimsComputerRepairАй бұрын

  Glad it helped!

• 
  @user-yn8mz5bf9yАй бұрын

  STOP SENDING ADVERTSIMENTS

• 
  @adamtajhassam9188Ай бұрын

  i use adblocks that connects to ip to hide the ad. takes 1 extra second to load the video but no ad to deal with.

• 
  @user-yn8mz5bf9yАй бұрын

  @@adamtajhassam9188 The whole video is a advisement

• 
  @TimsComputerRepairАй бұрын

  Hi everyone don't forget to smash that like button and subscribe to get notifications of future videos.

• 
  @narabdelaАй бұрын

  Will you be able to repair it after it gets smashed?

• 
  @abrahamruizzamudio6089Ай бұрын

  Thanks my friend, had the same problems, with your information surely I'll do it

• 
  @aperson1181Ай бұрын

  Intel removed the zip file, it is exe now

• 
  @v9ng994Ай бұрын

  How do we do it now??

• 
  @ostrovmusicАй бұрын

  When I encountered this problem, I didn’t even know what I could try to do about it. You've been a great help. Thank you very much Tim!

• 
  @TimsComputerRepairАй бұрын

  Glad it helped!

• 
  @rayhill1654Ай бұрын

  Fantastic! This is an HP issue as I have installed Windows on hundreds of machines and only needed to load external drivers on machines with special RAID controllers. In my experience HP does not stand for Hewlett Packard, it stands for Horrible Product!

• 
  @TimsComputerRepairАй бұрын

  Glad it helped!

• 
  @sabre4382Ай бұрын

  Yeah my fans have been screwed up recently, took it to get repaired and they wanted my password to get in, which I really wasn’t crazy about. They said it was to make sure everything was working ok, but I didn’t see how that was a fan problem. Ntm it had gotten to the point where it made that sound just from turning it on which I told them