Пікірлер

• 
  @supermario1398 Жыл бұрын

  Айм фром Раша, энд ай донт андестенд вот вис гайс доинг

• 
  @wesleywernimont86905 жыл бұрын

  I have been there twice and it is heaven!

• 
  @gambitgaming45736 жыл бұрын

  this would be my dream job 😩💰

• 
  @gambitgaming45736 жыл бұрын

  you wouldn't even have to pay me. ill work for knives

• 
  @gambitgaming45736 жыл бұрын

  we need more balisongs!!

• 
  @pmartinknives6 жыл бұрын

  Knife maker heaven!

• 
  @lsubslimed6 жыл бұрын

  Man I'd be like a kid in a candy story there. I've been a customer (online) for probably over 7 years now so I'd like to thank you for your services to the knife making community, Tracy 👍👍

• 
  @jakefriday17146 жыл бұрын

  It is exactly like being a kid in a candy store I go there like once every two weeks I seem to come out with more than I thought I was going to get.

• 
  @billyjoedenny6 жыл бұрын

  yes sir , working good . great shop ..billy joe

• 
  @aricschannel16 жыл бұрын

  It's working

• 
  @davestowers53896 жыл бұрын

  All 6 in one shot club! Thats for taking the time to make all of these videos. :)

• 
  @davestowers53896 жыл бұрын

  Off topic- Sweet kegerator ;)

• 
  @orlynesquivel64416 жыл бұрын

  Omg thanks!!!

• 
  @rockinlknivesjeremy40026 жыл бұрын

  Tracy thanks for the videos, just received my order for ya'll, I have a question about heat treat gases, i have heard argon/carbon dioxide ?? Can it be done with carbon dioxide only?? I cant find any info on this question.... Thanks

• 
  @tomh.6486 жыл бұрын

  Thank you for that succinct and educational video. Very helpful! I'm new to drill press/metal craft and i knew something like this existed. Thanks again!

• 
  @MeowTow6 жыл бұрын

  Please make more DogBite 3.1s or affordable balisongs. Compete with BRS Barebones!

• 
  @Metalhead-4life6 жыл бұрын

  Do you make scales for production knives or just sell the materials?

• 
  @wrenjones55646 жыл бұрын

  When is the next workshop??

• 
  @peterbalames98156 жыл бұрын

  I received this sharpener about a month ago and I have to tell you it is fantastic. I have read a lot of reviews that badmouthed this item and I have to tell you that the people that wrote those bad reviews either work for other companies or they are just plain ignorant on how to use a pull through sharpener. I have been using this sharpener and putting just short of a razor sharp mirrors edge on all of my folders and find that if you know what you are doing by not putting pressure and or pressing your blades as you pull them through that you will receive a fantastic edge 100% percent of the time.

• 
  @nerdofgod41676 жыл бұрын

  I been wondering what shimmering effects Kirnite has. Looks like it can be polished to a glass finish while maintaining a deep rich color.

• 
  @davidk63576 жыл бұрын

  I just ordered one of these kits. Look forward to putting it together. I would prefer the black scales with the black wash other than satin though. Thanks for offering these.

• 
  @thescabuglychannel76006 жыл бұрын

  Looks like a fun project just wish it was available in tip up carry.

• 
  @michaelgervais29016 жыл бұрын

  Do you have any experience, first-hand or second-hand, with setting stone scales? Any tips, or "do's and don'ts" you can share? Great video by the way. Very informative

• 
  @kickazz94736 жыл бұрын

  Thanks I was kind of thinking this is what I needed to do. I just wanted reassuring before I did it!

• 
  @CKKnifeandTool6 жыл бұрын

  What are your bearings dimensions? I blew a bearing on my 1" rubber contact wheel and want to buy extra's.

• 
  @kamikazej776 жыл бұрын

  How can I get the arbor press bender used in the video ?

• 
  @jayrachelrey17986 жыл бұрын

  How to remove mightybond to a leather shoes? Please help thanks

• 
  @nishantbagade67186 жыл бұрын

  Cool product. You should make a Thumb stud with Wave feature for quick deployment like Emerson knives have. That would be cool.

• 
  @jonmoore73656 жыл бұрын

  I'm looking for the method to polish a stack leather washer handle..

• 
  @schmidtforge19466 жыл бұрын

  exactly what I need Tracey. thank you!!

• 
  @walkonking6 жыл бұрын

  The easiest way is to pull it back when it is still a block, to the point at where the scale starts and then a little further. As you cut and sand a small tab will be left to pull off when finished.

• 
  @aricschannel16 жыл бұрын

  Do you have any smaller patterns?

• 
  @jasonchang28367 жыл бұрын

  got any for the kershaw skyline?

• 
  @GetMeThere17 жыл бұрын

  I like to use the "micro-somethin' voodoo," personally.

• 
  @tuneinbud7 жыл бұрын

  can you put a paracord handle on one of these knives?

• 
  @mznightmare7757 жыл бұрын

  Thank you for these videos! I am interested in leather working for my senior art show and found your videos. They will help me tremendously in this learning process.

• 
  @angelaprestwood13517 жыл бұрын

  gee no motor either grinder of a life time with no motor to run it with

• 
  @brettpeall82297 жыл бұрын

  Thanks for all the videos, I must say it is the best explained folder video ever very inspirational. Thanks again

• 
  @ronbonick42657 жыл бұрын

  ever glue velcro to leather ? any advise?

• 
  @TheZombieburner7 жыл бұрын

  My 110 has a damascus blade, will these scratch the finish?

• 
  @GisSlicknSmooth7 жыл бұрын

  Hi there. I recently purchased a 1x30 belt sander and reprofiled the edge on an sk5 knife (cold steel chaos double edge). I knew about the possiblity of ruining the temper so I took care to quench in water every stroke but developed a blackish brown burn mark on the tip.... which means the temper is probably messed up there right? how bad is this really? I stabbed some hard wood and the tip doesn't bend or break and is still sharp... i even noticed some of the burn mark has gone away by stabbing it in the wood. Does this mean that the tip is softer than before or more harder/brittle than before?

• 
  @billfrankeberger7547 жыл бұрын

  Would this be a good home tool for Cutting off the over spill on a re-soled shoe? Edging /trimming the extra material of the new sole?

• 
  @justinrbrandt7 жыл бұрын

  Awesome video very informative! What is that metal block with the holes called? Makes it easier to drive pins and other tasks. I need one.

• 
  @willpin76 жыл бұрын

  123 block

• 
  @aricfowler62277 жыл бұрын

  Can you use both sides of the belt? rough vs smooth? or dedicate a belt for rough and one for smooth?

• 
  @rollbot7 жыл бұрын

  +1

• 
  @rollbot7 жыл бұрын

  +1 on sharing

• 
  @luckycat667 жыл бұрын

  Really enjoy all your videos !!

• 
  @aarfdood7 жыл бұрын

  Great video. Thanks for the tutorial. I will be ordering my kit from USAKnifemaker shortly.

• 
  @razors81457 жыл бұрын

  you sure are a maestro at your profession. Thank you very much for the informative video.

• 
  @razors81457 жыл бұрын

  tobby, tim, tommy must have lost a bet. lol

• 
  @timcloonan7 жыл бұрын

  Don't think barbers can use the old tyme razors for shaving between clients. Blood virus disease threats...One I go to uses disposable razor

• 
  @mikeramirez27077 жыл бұрын

  than what the purpose of haveing a standard drill bit if the brad works the best