Пікірлер

• 
  @MrRemakesКүн бұрын

  They should use cardboard spools, or have a way of sending empty spools back to the filament factory. Edit: Here's an interesting video from a Canadian filament maker. I bet there's a way of turning failed prints into pellets that could be extruded into "new" filament. kzread.info/dash/bejne/pZxlsptypKzdlNI.html

• 
  @lupusk9productionsКүн бұрын

  we really just need our recycling facilities to actually recycle more. They basically only do the easiest to recycle materials and skip the rest despite their "recycleable symbol" or a giant solar powered pyrolysis plant that can heat up and distill down those plastics into the various oils and fuels again for reuse.

• 
  @RedstonerDКүн бұрын

  I would love more kits or printer standards going towards using pellets

• 
  @elCeVeZКүн бұрын

  besides beeing a little more expensive, i like bambulabs effort in promoting reusable spools and spool refills. Wasted prints though are a thing i need to start thinking about

• 
  @jean-marcgruninger90192 күн бұрын

  yes, we have to do something about plastic waste in 3d printing, although there are places that will recycle pla now, its quite rare. There’s really no excuse for plastic spools, unless they are intended to take refills . I now only get cardboard spools.

• 
  @pvegabe18202 күн бұрын

  that boy dragon grown now. great vid

• 
  @jatsantsa2 күн бұрын

  I have prusa mini and printer never (so far) pulled filament spooler from its place.

• 
  @willcoxfamily572 күн бұрын

  You guys should play FlickFleet!

• 
  @unmouse.jpeg.mp3.png.mp44 күн бұрын

  красава

• 
  @testfag5 күн бұрын

  ty i coudnt find the answer and this helped me

• 
  @jpt36405 күн бұрын

  I imported an STL (from KiCAD WRL -> FreeCAD STL-> Blender) which seems to sit somewhere where I cannot see it. Setting the origin does not help. What can I do?

• 
  @jpt36405 күн бұрын

  solved. Blander actually can import WRL directly and this worked.

• 
  @sgasolacewolf49307 күн бұрын

  Well that failed for me I did all the steps and I get a dark background

• 
  @hoctrimededebutry86557 күн бұрын

  Hello from France !! thanks for sharing your experience with this beautiful printer ! Concerning the PTFE issue, i use a Capricorn PTFE tubes from the beginning without any problem.

• 
  @brettvitaz91018 күн бұрын

  You can replace the heat break with one from bond tech and never have to replace the hot side PTFE tube again. Also, try Capricorn PTFE tubes. I have many hundreds of hours without failures using these.

• 
  @lillalysmasken36 күн бұрын

  I did that a few years ago when having issues with my mini…unfortuneatly the bondtech heat break suffers from heat creep. There are a few long thrrsds about this on the prusa forum. What i ended up doing is changing to a dragon hotend. The mini has been flawless since then. Took some tinkering and requires a working printer to print the new mounts but definatly worth it🎉

• 
  @brettvitaz91016 күн бұрын

  @@lillalysmasken3 I wonder what is different about my MINIs from yours. I have not had one single hot end related print failure over many hundreds of print hours and multiple printers using the Bondtech heat break.

• 
  @lillalysmasken36 күн бұрын

  @@brettvitaz9101 i guess you were lucky and i wasn’t😅

• 
  @sirnoble2698 күн бұрын

  ayo dude what do you use you edit your videos?

• 
  @Dragon3D7 күн бұрын

  Davinci Resolve

• 
  @sirnoble2696 күн бұрын

  ​@@Dragon3D niiice, I use capcut to make my vids.

• 
  @BeningAuliKarnain8 күн бұрын

  why is mine couldn't track the follow path at all? the camera doesn't move

• 
  @stopmotionadventures481212 күн бұрын

  10 hoours ago

• 
  @markonar14013 күн бұрын

  Thanks for this Quick Great Overview!!! 👌😉

• 
  @TimothyMullinMedia13 күн бұрын

  Great video! Love the info! Think I’m gonna get the X4 as my first 360 camera 😁

• 
  @hereb4theend14 күн бұрын

  What happened to Animation layers?

• 
  @jammygeez15 күн бұрын

  This is great - well produced and in depth im trying to find software like this at the moment and it's just what i wanted to know

• 
  @draywrid776316 күн бұрын

  YOUR A GOAT FR

• 
  @vitaliyturovskyy912218 күн бұрын

  Obviously 1 inch is better quality

• 
  @LightRider-t1j18 күн бұрын

  Great tutorial, thanks!

• 
  @HPS_Creation19 күн бұрын

  Thank u

• 
  @neilsamms438520 күн бұрын

  Great vid, thank you. I love these short and to-the-point tutorials. The shortest one I found before I found yours was 8 mins. How can someone spend 8 mins talking about what you just explained in under 2. Thanks again.

• 
  @iluvkkk21 күн бұрын

  🤓

• 
  @TheRareOcelot21 күн бұрын

  xXdRAGON3DXx anyone?

• 
  @Gametime0557722 күн бұрын

  Thanks ❤

• 
  @DocofDeath123 күн бұрын

  Absolute Legend thx bro

• 
  @antoinekikkers902226 күн бұрын

  Legend! Thank you for this. Exactly what I needed. You think it is easy to make it so the hinge drops by itself. So no friction? ( I should have watched the whole video first. Thank you again)

• 
  @promalachi11727 күн бұрын

  brother...slow tf down lol

• 
  @BankrollJay28 күн бұрын

  Keep it up!

• 
  @AvantNovis28 күн бұрын

  Thank you!

• 
  @ItsJDonYouTubeАй бұрын

  great tutorial thank you

• 
  @vampkllrАй бұрын

  I was watching a donut tutorial not realizing it was for 4.0 and he started inputting density values into the geometry node modifier, but that option is no longer available. Can someone please tell me where they moved it so I can make sprinkles?

• 
  @alexandramares2686Ай бұрын

  I don't have the numpad on MacBook Pro

• 
  @lupulo89Ай бұрын

  I think I have followed all the steps and it isnt working, no water comes out of the object, but the blender slows down a little, so it is loading something Maybe Blender has changed something in the last 3 years?

• 
  @lupulo89Ай бұрын

  It worked in a new blender file! thank you!

• 
  @lupulo89Ай бұрын

  Curiously, the version I made in the other file, when taken to the new file doesnt work, but luckily the fountain I made didnt have much detail

• 
  @lupulo89Ай бұрын

  ok, it works perfectly except when I change the replay cache to all 🤔 Can I still bake it somehow?

• 
  @lupulo89Ай бұрын

  nevermind, I thought I could see a preview before clicking on bake, now I know that I have to click on bake to see it xD thank you!

• 
  @KudzaiDaka-uc4zvАй бұрын

  Amazing work man. Really explained it quiet well. However, I wanted to find out how long it took you to print the phone case and which 3d machine did you use?

• 
  @Dragon3DАй бұрын

  Thanks, I used a Prusa Mini.

• 
  @KudzaiDaka-uc4zvАй бұрын

  @@Dragon3D yes but how long does it take to print one phone case?

• 
  @Dragon3DАй бұрын

  @@KudzaiDaka-uc4zv Around an hour.

• 
  @DanielGGavaАй бұрын

  thanks... and if I don't want do select the inside object ? Considering you would have a lot of them and wanted just the ones outside. Thanks.

• 
  @benedikts7529Ай бұрын

  how old are you ?

• 
  @bobarchitect7139Ай бұрын

  great tutorial!

• 
  @dianolonz-dk7uxАй бұрын

  Even though I don't press shift, the 3d cursor appears wherever I click. How can i fix it

• 
  @ItsJDonYouTubeАй бұрын

  you might be accidentally using his 1st option to move it. you are likely in 3d cursor mode

• 
  @DanielMarinchakАй бұрын

  Good luck and Godspeed!

• 
  @elbaby2001Ай бұрын

  The only feature that the X4 has that I wish the 1 inch had was being water proof to 30 feet. I love my One RS 1", the night time video of the London New Years fireworks show came out awesome.

• 
  @JKRJ14Ай бұрын

  New sub here. Keep going bro.

• 
  @sirnoble269Ай бұрын

  bro that's insane

• 
  @markonar140Ай бұрын

  Best of Luck for the Future!!! 👍😉

• 
  @jimboy2280Ай бұрын

  i dont have numpad for pattern selection brah

• 
  @avocadopictures9706Ай бұрын

  Ctrl+Shift+Plus did for me what checker deselect couldn't, thanks.