Thank you sir!!! Was able to replace the bearing thanks to you! E30 guys like you is what makes the bmw community so special!
3 ай бұрын
The dimple on the outer rotor is supposed to face inwards from my understanding but you assembled is facing outwards. When I disassembled my stock pump, it was facing inwards and also the inner rotor only had one dimple on it and not 3 like yours. It also faced inwards. Maybe the direction they face is diffeent between your pump and mine?
@adrienmorris42374 ай бұрын
Whatever came about with this project? Is the guy still alive?
@jenstori57464 ай бұрын
What’s the link to the Inter cooler ? And do u recommend?
@drayescobar94694 ай бұрын
Where did you buy your 5 lug adapters from?
@vineshnaidoo94025 ай бұрын
remove the bonnet broer.....
@kevinwhite95405 ай бұрын
Haven't been around in a while and couldn't find the channel where you changed the name from euro garage. I understand stuff happens but was really looking forward to seeing some new videos and nothing new was there. I hope all is well and life is treating you good.
@bss79566 ай бұрын
Putting a spacer back?
@kamathedaniel6 ай бұрын
Where did you route the hoses for the ICV and Brake Booster nn the intake boot?
@dw21766 ай бұрын
mounts the oil cooler upside down, uses a shifter on alu fittings, drills a hole in the sump with it still on.. wtf did I just watch
@danielleymen87447 ай бұрын
How to open the tap to put in the bulbs
@kamathedaniel7 ай бұрын
Where did you get the adapter for the GM pigtail?
@drayescobar94698 ай бұрын
I have bc coils from my e46 can i use those on my e30
@Nonchalan-TQ10 ай бұрын
The kit in the thumbnail where do I find?
@restingsmirkface10 ай бұрын
This was an excellent ad for gloves
@mikeedeep351810 ай бұрын
nice video but that drill sound almost killed my speakers lolll
@mannymoreno302011 ай бұрын
Where can I get the air temp sensor with the tail for no cuts
@imranfida198211 ай бұрын
Good job. Does anyone know if any other lip would fit?
@dannygrovegrove7518 Жыл бұрын
This is a cool way to do on the cheap But it looks like your going have a really hard time stretch a tire on it the iner bead is short
@ap1dot988 Жыл бұрын
Is this build still happening
@E30Tylerrr Жыл бұрын
I used a 30mm from autozone to get my axle nut off
@tonydownes7424 Жыл бұрын
You have done a great job...shame they aren't safe for the street
@freak227z Жыл бұрын
Great work, I want to do something like that for my Camaro
@EliasRizk53 Жыл бұрын
You should have arches no need for a wide kit , just wide flares
@97turboaudi Жыл бұрын
RIP man you'll be missed
@TheTasteOfRegret8 ай бұрын
The channel, or actually him? I've been wondering what happened with the uploads.
@MirrorRe4per7 ай бұрын
@@TheTasteOfRegret hes active on Insta, think he broke up with his gf and moved
@aniluzun2321 Жыл бұрын
Can i use all items(brakes calipers..) from 45mm to 51mm
@tomasm.7696 Жыл бұрын
where did you disappear ?
@Southside_-fn3ix Жыл бұрын
Do you still make custom boxes
@4den63 Жыл бұрын
Did u upgrad the internals in the engine since u running turbo now
@nateb26 Жыл бұрын
can you do a video of your jig?
@zuze9112 Жыл бұрын
SO you fucked 2 good sets to make 1 ?
@TheCuttz1984 Жыл бұрын
CRC is your friend with aluminium. Good outcome none the less.
@onesikm3 Жыл бұрын
I was hoping you would mention the part number for the shortened sway bar links. I don’t want to order the wrong ones and have to deal with returning
@djloqman1 Жыл бұрын
Can you add a E36 M3 coilovers with a non m3 e36 spindle on E30 5lug swap
@selespeed3 Жыл бұрын
Is this the proper way?
@chrissilva5659 Жыл бұрын
I think it’s stupid they didn’t come with a way to mount it .
@wurslegumage Жыл бұрын
How much did the carbon roof kit cost?
@craig_ramjet990 Жыл бұрын
I know you're grinding. Just checking on you and the project. It's been a year since the last video. Just checking to make sure you are okay. Peace and Merry Christmas
@anthonythomas4423 Жыл бұрын
Vary nice
@horizonmotors4022 Жыл бұрын
Could I use the same turbo kit on a ‘90 525i with some fabrication?
@denisnovacek8428 Жыл бұрын
I never understood how such small piece of metal can cost 100-150 bucks
@justyeti7244 Жыл бұрын
🇮🇳 special 😭
@Nuurmi98 Жыл бұрын
Do you know how to remove that inner rotor gear from the axle?
Пікірлер
I’m inspired to try and wrap my own car now. ❤
Thank you sir!!! Was able to replace the bearing thanks to you! E30 guys like you is what makes the bmw community so special!
The dimple on the outer rotor is supposed to face inwards from my understanding but you assembled is facing outwards. When I disassembled my stock pump, it was facing inwards and also the inner rotor only had one dimple on it and not 3 like yours. It also faced inwards. Maybe the direction they face is diffeent between your pump and mine?
Whatever came about with this project? Is the guy still alive?
What’s the link to the Inter cooler ? And do u recommend?
Where did you buy your 5 lug adapters from?
remove the bonnet broer.....
Haven't been around in a while and couldn't find the channel where you changed the name from euro garage. I understand stuff happens but was really looking forward to seeing some new videos and nothing new was there. I hope all is well and life is treating you good.
Putting a spacer back?
Where did you route the hoses for the ICV and Brake Booster nn the intake boot?
mounts the oil cooler upside down, uses a shifter on alu fittings, drills a hole in the sump with it still on.. wtf did I just watch
How to open the tap to put in the bulbs
Where did you get the adapter for the GM pigtail?
I have bc coils from my e46 can i use those on my e30
The kit in the thumbnail where do I find?
This was an excellent ad for gloves
nice video but that drill sound almost killed my speakers lolll
Where can I get the air temp sensor with the tail for no cuts
Good job. Does anyone know if any other lip would fit?
This is a cool way to do on the cheap But it looks like your going have a really hard time stretch a tire on it the iner bead is short
Is this build still happening
I used a 30mm from autozone to get my axle nut off
You have done a great job...shame they aren't safe for the street
Great work, I want to do something like that for my Camaro
You should have arches no need for a wide kit , just wide flares
RIP man you'll be missed
The channel, or actually him? I've been wondering what happened with the uploads.
@@TheTasteOfRegret hes active on Insta, think he broke up with his gf and moved
Can i use all items(brakes calipers..) from 45mm to 51mm
where did you disappear ?
Do you still make custom boxes
Did u upgrad the internals in the engine since u running turbo now
can you do a video of your jig?
SO you fucked 2 good sets to make 1 ?
CRC is your friend with aluminium. Good outcome none the less.
I was hoping you would mention the part number for the shortened sway bar links. I don’t want to order the wrong ones and have to deal with returning
Can you add a E36 M3 coilovers with a non m3 e36 spindle on E30 5lug swap
Is this the proper way?
I think it’s stupid they didn’t come with a way to mount it .
How much did the carbon roof kit cost?
I know you're grinding. Just checking on you and the project. It's been a year since the last video. Just checking to make sure you are okay. Peace and Merry Christmas
Vary nice
Could I use the same turbo kit on a ‘90 525i with some fabrication?
I never understood how such small piece of metal can cost 100-150 bucks
🇮🇳 special 😭
Do you know how to remove that inner rotor gear from the axle?
96
2€
96
Sim ok tudo bem contigo sim ok 96
2