Great explanation- clear and to the point with good video. Thanks!
@danmackintosh632526 күн бұрын
Naw man she not blown up, at least not bad. Did sound like it tried to hot-seize so maybe pinched the rings (assuming its not just plugs) but barrels might go again
@copperhead350526 күн бұрын
later found out the flywheel nut backed off and so did the flywheel and ate up the keyway new keyway and cleaning and started first kick forgot to make a update video lol
@danmackintosh632517 күн бұрын
@@copperhead3505 wicked good to hear that :)
@uPilot26 күн бұрын
That sounds so good I wish i had a 4 wheeler that sounded so good like that man....
@DragRons26 күн бұрын
That thing sounds like shit
@copperhead350526 күн бұрын
yea ik needa swap my.silencers out
@AndyR4966Ай бұрын
Mason Jason
@mr.k8401Ай бұрын
Hi I was wondering what the whole setup is? And the top speed if possible
@copperhead3505Ай бұрын
from what i remember it had full pro action suspension with vforce 4 reeds and full fmf exhaust and i have a top speed video on my channel
@juanaluvian92282 ай бұрын
❤ I can’t believe I’ve been paying for this. Thank you so much
@jamespartin53532 ай бұрын
Seems like most raptors need work
@user-sx1mt2hg5v4 ай бұрын
brother use one finger for the clutch trust me
@onenessseeker56834 ай бұрын
I hate using the clutch to pop wheelies. I just get her ready right on the edge of the band. then I know once I crack the throttle she's going to come up clean. just got to make sure you are in the right gear
@coolcatreturnsdavis99556 ай бұрын
Back when things were made to be fixed, i have a 2000 and this is great info!
@copperhead35056 ай бұрын
glad i could help!
@coolcatreturnsdavis99556 ай бұрын
@@copperhead3505 got them both replaced tonight!
@ghostlycondom82957 ай бұрын
Niceeeeee
@ATCRyderX7 ай бұрын
They're all boat anchors, Boomhauer. At least you got the "Quadzilla Experience" done & over with lol
@copperhead35057 ай бұрын
agreed since i got my banshee I aint goin back
@ATCRyderX7 ай бұрын
Hell yeah. There ya go! @@copperhead3505
@josjidk27187 ай бұрын
How much was the lift
@copperhead35057 ай бұрын
in that video it was about 1k
@josjidk27187 ай бұрын
@@copperhead3505 thanks I’m a freshman and I just recently got this truck as my first and I hope to upgrade it for looks and functionality and because my money has to go somewhere right now 😀
@copperhead35057 ай бұрын
yea np and for another 50 bucks or so you can also put a 2½ inch level in it if you tryna go to 12 but if yours is 2wd you can put 2nd gen tacoma lift struts with the rc for round 15 inchs
@adamheffelfinger769320 күн бұрын
@@copperhead3505i’m guessing for 4wds the 2nd gen tacoma struts still will work or will it mess up the angles on the cv’s?
@copperhead350520 күн бұрын
@adamheffelfinger7693 from my understanding you can't run 4wd with the 2nd gen struts and some.high caster uppers will be recommended
@jameslittle91488 ай бұрын
I bhet that clutch toast 😂
@copperhead35058 ай бұрын
lol i was rough on it back then but i still got it and still works good
@SOFGrylls8 ай бұрын
The most ungodly 1st gen Tacoma I've seen. I Like it
@copperhead35058 ай бұрын
lol fr im currently in the process of wraping it lol
@user-og4oi8io9e9 ай бұрын
I know you have the rough country lift but do you have 2 inch spacers in the front as well, I noticed it has a really good stance
@copperhead35059 ай бұрын
thanks you should see it now it has chrome 26x14s and 12 inch lift with 2 inch spacers
@user-lh2hq2zm4v9 ай бұрын
How much did the shop charge you to install?
@copperhead35059 ай бұрын
i think it was like 650 and i did the body lift
@jeremyrude68839 ай бұрын
Sounds like your crank bearing rattling
@copperhead35059 ай бұрын
there was alotta stuff loose lol it eventually swallowed a ring tho
@romellojames669010 ай бұрын
This is hard to watch 😂
@copperhead350510 ай бұрын
ik dawg i was making some cringe content back in the day
@kazi3149 Жыл бұрын
😮
@Johnny-nq6hm Жыл бұрын
Would you suggest this or a Honda xr100r for speed
@copperhead3505 Жыл бұрын
never had a xr100 but ill never buy a honda again
@Johnny-nq6hm Жыл бұрын
Why won’t you buy a Honda?
@Johnny-nq6hm Жыл бұрын
If you don’t mind
@copperhead3505 Жыл бұрын
@Johnny never had any luck with em every honda ive owned or been around has been junk
@copperhead3505 Жыл бұрын
@@Johnny-nq6hm there way to overhyped
@user-hy3xq2fh9p Жыл бұрын
Украина
@user-hy3xq2fh9p Жыл бұрын
Украина
@elliottroberts1007 Жыл бұрын
Weird. I could only get mine up to 38mph. Flat concrete 100lb rider
@MATRIX_TTR6 ай бұрын
Thats weird i get mine to 73mph ( with lots of modifications)
@mattbujold4069 Жыл бұрын
How did it end up lasting?
@copperhead3505 Жыл бұрын
did good eventually it began to wear away coming out the head
@TruckStored Жыл бұрын
This bike is quite underpowered for a 125cc, thanks for the speed test
@FREEPERCS1847 ай бұрын
It’s a pitbike and would dust a ttr or anything else that is in the same category this bike isn’t even running right you can hear it
@ydkma Жыл бұрын
Sounds like your power valve is stuck closed
@copperhead3505 Жыл бұрын
i sold it lol never found the problem
@coltonlynn282529 күн бұрын
@copperhead3505 it could've been your clutch worn out and slipping, which would mean your bikes revving real high but the powers not actually being transfered since those fibers are worn and not grabbing no more
@ydkma28 күн бұрын
@@coltonlynn2825 except the bike isn't revving high
@Reflxct1 Жыл бұрын
im 4,11 do you think i could ride one??
@copperhead3505 Жыл бұрын
yes i was around there when i had it and could touch fine
@Reflxct1 Жыл бұрын
@@copperhead3505 ok tysm
@MaryandTheJeepCycle Жыл бұрын
Great video!!
@BikeLife_Nano Жыл бұрын
Im trying to wheelie but I’m low key scared 😂
@richardmull7146 Жыл бұрын
So what did you do ? I've used those filters with no problem
@copperhead3505 Жыл бұрын
just took it off and put uni on
@remingtonhaley3276 Жыл бұрын
How you fixed the back bumper because I put the 3 inch body lift on it and it’s got a big gap
@copperhead3505 Жыл бұрын
you gotta unbolt it and flip the braket upside down and drill new holes we did mine to high and the tailgate sits on the bumper now
@giovannisanchez408 Жыл бұрын
What size back tires ?
@copperhead3505 Жыл бұрын
2 inches shorter then oem in sure
@carlosacevedooyanedel Жыл бұрын
Thanks my problem was The air filter
@diegoortega3584 Жыл бұрын
did your hesitate when cutting the crossmember ?
@copperhead3505 Жыл бұрын
got a shop to do it but yes when i was reading it i took into consideration that i can't unlift my truck if i put it on but 2 years later ive never wanted the lift out so no problem with cutting it
@Jfer8080 Жыл бұрын
You people are dangerous.
@megalapega365 Жыл бұрын
What size read shoks do you have ?
@copperhead3505 Жыл бұрын
stock rc shocks
@copperhead3505 Жыл бұрын
rc lift shocks*
@brentostrander6488 Жыл бұрын
What is that extension from the ball joint to the knuckle?
@copperhead3505 Жыл бұрын
no idea
@diegoortega3584 Жыл бұрын
just a spindle extender that comes in the kit so you dont have to buy a whole new and longer spindle
@CoolnCasual57 Жыл бұрын
Let's go now I know how to wheelie
@brentostrander6488 Жыл бұрын
What lift is on this?
@copperhead3505 Жыл бұрын
6 inch rough country and 3 inch body check out my newest video on the truck it now has a 12 inch lift and 37s
@georgemelo4644 Жыл бұрын
Go figures same issue with mine. Thanks for the video
@GG-pi5el Жыл бұрын
How much front suspension travel do you get? It seems like the bump stop gap is very small
@copperhead3505 Жыл бұрын
not very much tbh but updated the video and i put a 2½ level and it helped abunch
@Termit57111 ай бұрын
I just put this same 6 inch rough country kit on mine and it was riding the bump stops too. I called rough country and they told me it was supposed to be like that but there is no way because I had absolutely no upward travel. I bought a 3 inch strut spacer and put it on and it fixed it
@george_floyyyd6956 Жыл бұрын
What gear you need to be in
@copperhead3505 Жыл бұрын
1st
@King_TuTT Жыл бұрын
looks like fun!!
@levilobban3017 Жыл бұрын
I got a 97 Toyota Tacoma and I already have a 2 inch body lift on it and a 3 inch leveling kit. I’m not trying to put in a lot of money into it what else could I do to lift the front of it without it being that expensive ?
@copperhead3505 Жыл бұрын
nothing besides lift kit
@itzpotater8418 Жыл бұрын
man it sounds incredible
@copperhead3505 Жыл бұрын
thanks man
@bradycooper9733 Жыл бұрын
Found a vid of your old blaster was wondering if youve heard of a blaster starting backwards and only having 5 reverse gears i cant get it to fire up any other way
@copperhead3505 Жыл бұрын
naw man i aint never
@dawnflathers39912 жыл бұрын
My dad has a Raptor 700R with a stage 3 Trinity exhaust pipe in his ATV is crap it's 100 decibels
Пікірлер
Straight to the point. Thanks
Great explanation- clear and to the point with good video. Thanks!
Naw man she not blown up, at least not bad. Did sound like it tried to hot-seize so maybe pinched the rings (assuming its not just plugs) but barrels might go again
later found out the flywheel nut backed off and so did the flywheel and ate up the keyway new keyway and cleaning and started first kick forgot to make a update video lol
@@copperhead3505 wicked good to hear that :)
That sounds so good I wish i had a 4 wheeler that sounded so good like that man....
That thing sounds like shit
yea ik needa swap my.silencers out
Mason Jason
Hi I was wondering what the whole setup is? And the top speed if possible
from what i remember it had full pro action suspension with vforce 4 reeds and full fmf exhaust and i have a top speed video on my channel
❤ I can’t believe I’ve been paying for this. Thank you so much
Seems like most raptors need work
brother use one finger for the clutch trust me
I hate using the clutch to pop wheelies. I just get her ready right on the edge of the band. then I know once I crack the throttle she's going to come up clean. just got to make sure you are in the right gear
Back when things were made to be fixed, i have a 2000 and this is great info!
glad i could help!
@@copperhead3505 got them both replaced tonight!
Niceeeeee
They're all boat anchors, Boomhauer. At least you got the "Quadzilla Experience" done & over with lol
agreed since i got my banshee I aint goin back
Hell yeah. There ya go! @@copperhead3505
How much was the lift
in that video it was about 1k
@@copperhead3505 thanks I’m a freshman and I just recently got this truck as my first and I hope to upgrade it for looks and functionality and because my money has to go somewhere right now 😀
yea np and for another 50 bucks or so you can also put a 2½ inch level in it if you tryna go to 12 but if yours is 2wd you can put 2nd gen tacoma lift struts with the rc for round 15 inchs
@@copperhead3505i’m guessing for 4wds the 2nd gen tacoma struts still will work or will it mess up the angles on the cv’s?
@adamheffelfinger7693 from my understanding you can't run 4wd with the 2nd gen struts and some.high caster uppers will be recommended
I bhet that clutch toast 😂
lol i was rough on it back then but i still got it and still works good
The most ungodly 1st gen Tacoma I've seen. I Like it
lol fr im currently in the process of wraping it lol
I know you have the rough country lift but do you have 2 inch spacers in the front as well, I noticed it has a really good stance
thanks you should see it now it has chrome 26x14s and 12 inch lift with 2 inch spacers
How much did the shop charge you to install?
i think it was like 650 and i did the body lift
Sounds like your crank bearing rattling
there was alotta stuff loose lol it eventually swallowed a ring tho
This is hard to watch 😂
ik dawg i was making some cringe content back in the day
😮
Would you suggest this or a Honda xr100r for speed
never had a xr100 but ill never buy a honda again
Why won’t you buy a Honda?
If you don’t mind
@Johnny never had any luck with em every honda ive owned or been around has been junk
@@Johnny-nq6hm there way to overhyped
Украина
Украина
Weird. I could only get mine up to 38mph. Flat concrete 100lb rider
Thats weird i get mine to 73mph ( with lots of modifications)
How did it end up lasting?
did good eventually it began to wear away coming out the head
This bike is quite underpowered for a 125cc, thanks for the speed test
It’s a pitbike and would dust a ttr or anything else that is in the same category this bike isn’t even running right you can hear it
Sounds like your power valve is stuck closed
i sold it lol never found the problem
@copperhead3505 it could've been your clutch worn out and slipping, which would mean your bikes revving real high but the powers not actually being transfered since those fibers are worn and not grabbing no more
@@coltonlynn2825 except the bike isn't revving high
im 4,11 do you think i could ride one??
yes i was around there when i had it and could touch fine
@@copperhead3505 ok tysm
Great video!!
Im trying to wheelie but I’m low key scared 😂
So what did you do ? I've used those filters with no problem
just took it off and put uni on
How you fixed the back bumper because I put the 3 inch body lift on it and it’s got a big gap
you gotta unbolt it and flip the braket upside down and drill new holes we did mine to high and the tailgate sits on the bumper now
What size back tires ?
2 inches shorter then oem in sure
Thanks my problem was The air filter
did your hesitate when cutting the crossmember ?
got a shop to do it but yes when i was reading it i took into consideration that i can't unlift my truck if i put it on but 2 years later ive never wanted the lift out so no problem with cutting it
You people are dangerous.
What size read shoks do you have ?
stock rc shocks
rc lift shocks*
What is that extension from the ball joint to the knuckle?
no idea
just a spindle extender that comes in the kit so you dont have to buy a whole new and longer spindle
Let's go now I know how to wheelie
What lift is on this?
6 inch rough country and 3 inch body check out my newest video on the truck it now has a 12 inch lift and 37s
Go figures same issue with mine. Thanks for the video
How much front suspension travel do you get? It seems like the bump stop gap is very small
not very much tbh but updated the video and i put a 2½ level and it helped abunch
I just put this same 6 inch rough country kit on mine and it was riding the bump stops too. I called rough country and they told me it was supposed to be like that but there is no way because I had absolutely no upward travel. I bought a 3 inch strut spacer and put it on and it fixed it
What gear you need to be in
1st
looks like fun!!
I got a 97 Toyota Tacoma and I already have a 2 inch body lift on it and a 3 inch leveling kit. I’m not trying to put in a lot of money into it what else could I do to lift the front of it without it being that expensive ?
nothing besides lift kit
man it sounds incredible
thanks man
Found a vid of your old blaster was wondering if youve heard of a blaster starting backwards and only having 5 reverse gears i cant get it to fire up any other way
naw man i aint never
My dad has a Raptor 700R with a stage 3 Trinity exhaust pipe in his ATV is crap it's 100 decibels
sounds real good imo
How many decibels do other exhaust have