Decorquip produces quality made-to-measure blinds and a range of fabrics and components. We deliver outstanding customer service and a commitment to fulfilling our customers' expectations by getting it right the first time, every time.
I just use a hairtie and wrap the bottom of the blunds together
@javierjara698727 күн бұрын
Hola, como se conecta a un hub zigbee ?
@captaindrywallАй бұрын
What? Turn down the music
@staid32 ай бұрын
How to remove the back of the remote case?
@DecorquipLtdАй бұрын
Hello. If there is a small hole in the top centre of the cover then you need to use a needle (or similar) to push into the hole. This will release the cover. If it is an older remote (with no hole) then the cover should just slide off.
@wstt43 ай бұрын
I can’t get the eve app to connect to my new roller shades after it scans the QR code. It tries to connect and then eventually says unable to add accessory. Accessory is not reachable. I even tried holding the shade program down for like 15 seconds and then tried over and over again and still no success. Any ideas? (WiFi and Bluetooth are on).
@DecorquipLtd2 ай бұрын
Hello - please email [email protected] and we will send you instructions on how to reset the motor.
@gzoechi3 ай бұрын
Can the battery be replaced? What's the cassette depth? Can I mount it so that it doesn't collide with the window handle when mounting it inside the window?
@DecorquipLtd3 ай бұрын
The cassette depth will depend on how much fabric you have around the tube. However, the depth of the brackets is 61mm. To avoid window handles we suggest ordering the blind as forward roll as shown in the video. If you have a very small recess, then avoiding the window handle may not be possible.
@gzoechi3 ай бұрын
@@DecorquipLtd Thanks a lot🚀 I guess the battery cannot be replaced then?
@DecorquipLtd3 ай бұрын
@@gzoechi Sorry to miss that question. No - the battery is within the motor so it cannot be replaced. All of our motors have a 5-year warranty but generally speaking they last much longer than that.
@gzoechi3 ай бұрын
@@DecorquipLtd Thanks for the answer. I understand that that's the case because of size restricted. I have 3 smart locks and a spare battery. So if battery is empty I exchange it with the spare one and connect the empty one to the charger. It's conversation but I can live without.
@DecorquipLtd3 ай бұрын
@@gzoechi These blinds can be recharged in situ with any USB-C charger. Generally, takes a few hours to fully charge.
@johnbeauchamp25384 ай бұрын
Can I move my cord rod after the blinds have already been installed? I’m trying to change my blinds from center stack to split stack
@DecorquipLtd3 ай бұрын
Hello John. Unfortunately, this is very difficult to do without stripping the headrail down completely and possibly adding some extra parts.
@shawnpitts48884 ай бұрын
Do you have away to safely access the port if its mounted 20 feet high?
@DecorquipLtd4 ай бұрын
Hello - your only option here is going to be a ladder of sorts to access the port! We would usually discourage customers from opting for rechargeable blinds in these situations - hard wired/mains powered would be better. We do offer a solar panel that would give battery blinds a trickle-charge. However, there are some drawbacks. Please contact the reseller that you purchased these blinds from to discuss.
@ksmesser33565 ай бұрын
I changed the battery and now the remote will not connect to the blinds. The blinds are fully charged. Help!
@DecorquipLtd4 ай бұрын
Hello - pls contact the company who you purchased these blinds through. They should be able to help. Alternately you can reach us directly on [email protected].
@PrezentEnt5 ай бұрын
Took me a while to find this . Thank you very helpful
@patriciamedina83705 ай бұрын
How do we charge the remote?
@annaleslie9186 ай бұрын
How can you tell the chain needs replacing but not something else that stops the blind working? Is there some wear and tear of missing links that shows
@DecorquipLtd5 ай бұрын
Hello Anna. The chain will only need replacing if it has started to rust (very rare), if it has snapped (again very rare) or if you decide that you want to refresh your headrails with a different colour chain. If you’re blind is not working, it is more likely to be a problem with the mechanism in the headrail or with the cord drums.
@Thasanimation8 ай бұрын
I accidently put off mine, now it's shorter, then I wanted to put it on again but here I learned it needs some tool aww :'D
@nenid77748 ай бұрын
I did not find it n your page???
@DecorquipLtd8 ай бұрын
Try this link www.decorquip.com/product-category/roller-blinds/roller-blind-accessories/
@stmartinsdiver8 ай бұрын
After taking the material out of the bottom bar to cut off a few inches which had got stained by mildew, I worked out what to do, but not how to do it - an excellent demo thanks. It will take me longer than you, but I'm now confident I can reassemble this as I have tools which will do the job and can use my workmate to use as a clamp.
@djjanjua51888 ай бұрын
Hi my blinds work with remote but it does not connect to the dream hub anymore it used to work
@DecorquipLtd8 ай бұрын
Hello - please contact the retailer that you purchased your blinds from. They will be able to help you.
@jamesmuthukui93558 ай бұрын
Nice job keep it up from Kenya 🇰🇪
@cm43829 ай бұрын
A housewife with no prior electrical knowledge… …from the 50’s 😂
@justthetruth110 ай бұрын
Hi, my mechanism has no screw but the plastic part will not pinch together, there is a visible spring inside. Any ideas please?
@LTCDRRAZOR11 ай бұрын
You need to spell check your info for the vid, pair, not paid. Beyond that, great tool
@DecorquipLtd11 ай бұрын
Thanks for flagging - now updated!
@LTCDRRAZOR11 ай бұрын
We often never know of a mistake, unless told. Thank you for not being like many and blowing up over it. Do you know if those will handle thicker fiberglass rods? 8mm to be specific@@DecorquipLtd
@DecorquipLtd10 ай бұрын
@@LTCDRRAZOR We have tested these with 8mm rods. Although the cutters are capable of cutting the rod, you need to use a much higher amount of pressure to get through the rod which isn't really possible by hand.
@Themata Жыл бұрын
How do you move the metal ball once some idiot has clamped it in place?
@DecorquipLtd Жыл бұрын
Hello - unfortunatley this is not an easy task. You should be able to prise the ball open using a small screwdriver and then some pliers/snips. You may have to end up cutting it off. Once you have removed the stopper, it may not be able to be reused.
@Themata Жыл бұрын
@@DecorquipLtd thanks for the reply. Sadly I have found this is entirely accurate (and doubly difficult due to being high up). I will return to my screwdriver and pliers ... it'll give eventually
@McSquiggles42 Жыл бұрын
Where can I get a fabric table with that clamp?
@DecorquipLtd Жыл бұрын
Hello - Unfortunatley this table is no longer produced. However, simular products are available. If you search 'Roller Blind Assembly Table' you should get several options come up. Hope this helps.
@BakerbooPaints Жыл бұрын
If only there was a way to actually order these from the link... that might be useful!
@blairleavell35018 ай бұрын
Where do I get these?!
@selfmademadness Жыл бұрын
Great video thanks!+
@DecorquipLtd Жыл бұрын
Thanks Winston -
@casatissus5986 Жыл бұрын
Bonjour cv Le prix pour le mètre 2
@denisekoh5947 Жыл бұрын
can it be used in Singapore?
@danielcontinisio456 Жыл бұрын
Trun down the music
@shayb9424 Жыл бұрын
Are the balls 4.5mm wide? & where can I purchase this chain that has the two headed pin between the balls . Thanks
@danstheman33 Жыл бұрын
All ball chains are like that, you can cut and splice them anywhere. You just have to make sure the pliers matches the size of the ball chain, both come in multiple sizes.
@Eugdum Жыл бұрын
what is the type nr of that roller mechanism, do you know ?
@crainger Жыл бұрын
Cool solution. Gonna get a few of these for the smaller rooms. Except most of my verticals draw to the middle of the windows. :(
@dkeinys Жыл бұрын
Can you post video on how to fix snapped cord at motor please?
@DecorquipLtd Жыл бұрын
Hello Darius - I'll ask the team to work on this. Could you confirm which cord you mean?
@bespoke4187 Жыл бұрын
Helpful. Our package didn't come with instructions to install the brackets and what instructions did come were not very easy to understand in the pictures. For example, the remote "button" on the back isn't really a button but needs a paperclip to operate. Nothing something the instructions points out, but your video demonstrates it. Can the remote be programmed for one of the channels to operate both blinds at the same time? I would like to have channel one operate the left blind. Channel two to operate the right blind and then channel three to operate both at the same time.
@AlexPaps Жыл бұрын
Where did you buy them from? Does it require a bridge?
@DecorquipLtd Жыл бұрын
Alexandros - The Eve Motion Blinds do not require a bridge - A Homepod Mini Gen 4 or newer will act as a bridge. You can find our distributors on our main website - www.decorquip.com/motionblinds/distributors/
@DecorquipLtd Жыл бұрын
Hello Be Spoke - yes what you are trying to do is possible. Feel free to contact our support team directly (We're sorry it's 2 months late)
@Robert-1948 Жыл бұрын
I have a fenetex patio screens that they are open and close with your remote control. I like to know if there is an option to operate using my cellphone , or a wifi remote system. Because, there times that I'm away from home and the screens will remain open.
@hammadshabbir6505 Жыл бұрын
check this video to get more information about Motorized Roman Blinds? kzread.infoPTGk90RKOuU
@luckyman10712 жыл бұрын
Thanks!
@jontysquirrel75552 жыл бұрын
I have fitted two of these blinds. I think there needs to be a rubber section on the bottom bar to make the black out blinds completely black out.
@jamesjross2 жыл бұрын
Teacher: "Pronounce the U in Popular" Wales: "No" JK. Great video. Lovely accent. I'm going with 2 blinds.
@DecorquipLtd Жыл бұрын
😁 Thanks @jamie ross
@carolynharper83312 жыл бұрын
But how do you get the plastic ball stops off if they're already on the chain without breaking the string? I broke my plastic chain trying to get one that is clasped to 2 balls. No instructions from the company. I had to jerry rig it myself.
@64maxpower2 жыл бұрын
I like that
@andrewarthurmatthews66852 жыл бұрын
Not the best demo video I have seen. Too much background noise. And the operation of a huge industrial machine was not explained! What on earth was he doing and why ? Not the sort of thing to do at home kids. No mention of how to alter width of blind if that’s at all possible. Could do better
@harshavardhan35092 жыл бұрын
who are here after SCMP ..lean system topic..
@chahat_nimbarkАй бұрын
😂
@cornbread21032 жыл бұрын
Thank you! Great video. Helped us install our roller blinds.
@jenniferlazenby40672 жыл бұрын
How do I do it or a blind rail without those 2 outer screws please?
@DecorquipLtd2 жыл бұрын
Do you mean the screws on the end caps Jennifer? I'm not too sure not knowing which brand it is, but if there are no visible screws we'd expect it to be a clip on cover.
We use a lot this pliers for connecting our chains and also retail it to our clients,just add us if you want, WhatsApp: 008618676983824, Email: [email protected] www.alibaba.com/product-detail/Roller-Blind-Accessories-Connector-Tool-Jointing_1600364783055.html?spm=a2700.galleryofferlist.normal_offer.d_title.7648374cuVQa3P
@saliminlie2 жыл бұрын
What is the brand and type for mylar punching and cutting tools. Thanks
@DecorquipLtd2 жыл бұрын
Hello, it is our own products on these..... www.decorquip.com/product-category/roller-blinds/tooling-roller-blinds/ - the punch is not shown here, but could get a price on application
@pebbles1232 жыл бұрын
This answers all my questions. Thank you. Its all very clear
@DecorquipLtd2 жыл бұрын
Great to hear!
@FunFanRandomerz2 жыл бұрын
my guy giving us 1min 30 sec video and tells us what we need and nothing more THANK YOU !!!
@davidspencer30512 жыл бұрын
Green in 2018??😂
@DecorquipLtd2 жыл бұрын
Glad we made you smile David
@matthewweitz12873 жыл бұрын
What is the width and thickness of the tape being used?
@DecorquipLtd3 жыл бұрын
Hi Matthew. Thanks for getting in touch. The width of the mylar tape is 8mm and the thickness about 1mm. Any more questions, give me a shout.
@vtomato29402 жыл бұрын
Hello, i go to the Webside company and only have 6mm and 7mm, no 8mm
Пікірлер
I just use a hairtie and wrap the bottom of the blunds together
Hola, como se conecta a un hub zigbee ?
What? Turn down the music
How to remove the back of the remote case?
Hello. If there is a small hole in the top centre of the cover then you need to use a needle (or similar) to push into the hole. This will release the cover. If it is an older remote (with no hole) then the cover should just slide off.
I can’t get the eve app to connect to my new roller shades after it scans the QR code. It tries to connect and then eventually says unable to add accessory. Accessory is not reachable. I even tried holding the shade program down for like 15 seconds and then tried over and over again and still no success. Any ideas? (WiFi and Bluetooth are on).
Hello - please email [email protected] and we will send you instructions on how to reset the motor.
Can the battery be replaced? What's the cassette depth? Can I mount it so that it doesn't collide with the window handle when mounting it inside the window?
The cassette depth will depend on how much fabric you have around the tube. However, the depth of the brackets is 61mm. To avoid window handles we suggest ordering the blind as forward roll as shown in the video. If you have a very small recess, then avoiding the window handle may not be possible.
@@DecorquipLtd Thanks a lot🚀 I guess the battery cannot be replaced then?
@@gzoechi Sorry to miss that question. No - the battery is within the motor so it cannot be replaced. All of our motors have a 5-year warranty but generally speaking they last much longer than that.
@@DecorquipLtd Thanks for the answer. I understand that that's the case because of size restricted. I have 3 smart locks and a spare battery. So if battery is empty I exchange it with the spare one and connect the empty one to the charger. It's conversation but I can live without.
@@gzoechi These blinds can be recharged in situ with any USB-C charger. Generally, takes a few hours to fully charge.
Can I move my cord rod after the blinds have already been installed? I’m trying to change my blinds from center stack to split stack
Hello John. Unfortunately, this is very difficult to do without stripping the headrail down completely and possibly adding some extra parts.
Do you have away to safely access the port if its mounted 20 feet high?
Hello - your only option here is going to be a ladder of sorts to access the port! We would usually discourage customers from opting for rechargeable blinds in these situations - hard wired/mains powered would be better. We do offer a solar panel that would give battery blinds a trickle-charge. However, there are some drawbacks. Please contact the reseller that you purchased these blinds from to discuss.
I changed the battery and now the remote will not connect to the blinds. The blinds are fully charged. Help!
Hello - pls contact the company who you purchased these blinds through. They should be able to help. Alternately you can reach us directly on [email protected].
Took me a while to find this . Thank you very helpful
How do we charge the remote?
How can you tell the chain needs replacing but not something else that stops the blind working? Is there some wear and tear of missing links that shows
Hello Anna. The chain will only need replacing if it has started to rust (very rare), if it has snapped (again very rare) or if you decide that you want to refresh your headrails with a different colour chain. If you’re blind is not working, it is more likely to be a problem with the mechanism in the headrail or with the cord drums.
I accidently put off mine, now it's shorter, then I wanted to put it on again but here I learned it needs some tool aww :'D
I did not find it n your page???
Try this link www.decorquip.com/product-category/roller-blinds/roller-blind-accessories/
After taking the material out of the bottom bar to cut off a few inches which had got stained by mildew, I worked out what to do, but not how to do it - an excellent demo thanks. It will take me longer than you, but I'm now confident I can reassemble this as I have tools which will do the job and can use my workmate to use as a clamp.
Hi my blinds work with remote but it does not connect to the dream hub anymore it used to work
Hello - please contact the retailer that you purchased your blinds from. They will be able to help you.
Nice job keep it up from Kenya 🇰🇪
A housewife with no prior electrical knowledge… …from the 50’s 😂
Hi, my mechanism has no screw but the plastic part will not pinch together, there is a visible spring inside. Any ideas please?
You need to spell check your info for the vid, pair, not paid. Beyond that, great tool
Thanks for flagging - now updated!
We often never know of a mistake, unless told. Thank you for not being like many and blowing up over it. Do you know if those will handle thicker fiberglass rods? 8mm to be specific@@DecorquipLtd
@@LTCDRRAZOR We have tested these with 8mm rods. Although the cutters are capable of cutting the rod, you need to use a much higher amount of pressure to get through the rod which isn't really possible by hand.
How do you move the metal ball once some idiot has clamped it in place?
Hello - unfortunatley this is not an easy task. You should be able to prise the ball open using a small screwdriver and then some pliers/snips. You may have to end up cutting it off. Once you have removed the stopper, it may not be able to be reused.
@@DecorquipLtd thanks for the reply. Sadly I have found this is entirely accurate (and doubly difficult due to being high up). I will return to my screwdriver and pliers ... it'll give eventually
Where can I get a fabric table with that clamp?
Hello - Unfortunatley this table is no longer produced. However, simular products are available. If you search 'Roller Blind Assembly Table' you should get several options come up. Hope this helps.
If only there was a way to actually order these from the link... that might be useful!
Where do I get these?!
Great video thanks!+
Thanks Winston -
Bonjour cv Le prix pour le mètre 2
can it be used in Singapore?
Trun down the music
Are the balls 4.5mm wide? & where can I purchase this chain that has the two headed pin between the balls . Thanks
All ball chains are like that, you can cut and splice them anywhere. You just have to make sure the pliers matches the size of the ball chain, both come in multiple sizes.
what is the type nr of that roller mechanism, do you know ?
Cool solution. Gonna get a few of these for the smaller rooms. Except most of my verticals draw to the middle of the windows. :(
Can you post video on how to fix snapped cord at motor please?
Hello Darius - I'll ask the team to work on this. Could you confirm which cord you mean?
Helpful. Our package didn't come with instructions to install the brackets and what instructions did come were not very easy to understand in the pictures. For example, the remote "button" on the back isn't really a button but needs a paperclip to operate. Nothing something the instructions points out, but your video demonstrates it. Can the remote be programmed for one of the channels to operate both blinds at the same time? I would like to have channel one operate the left blind. Channel two to operate the right blind and then channel three to operate both at the same time.
Where did you buy them from? Does it require a bridge?
Alexandros - The Eve Motion Blinds do not require a bridge - A Homepod Mini Gen 4 or newer will act as a bridge. You can find our distributors on our main website - www.decorquip.com/motionblinds/distributors/
Hello Be Spoke - yes what you are trying to do is possible. Feel free to contact our support team directly (We're sorry it's 2 months late)
I have a fenetex patio screens that they are open and close with your remote control. I like to know if there is an option to operate using my cellphone , or a wifi remote system. Because, there times that I'm away from home and the screens will remain open.
check this video to get more information about Motorized Roman Blinds? kzread.infoPTGk90RKOuU
Thanks!
I have fitted two of these blinds. I think there needs to be a rubber section on the bottom bar to make the black out blinds completely black out.
Teacher: "Pronounce the U in Popular" Wales: "No" JK. Great video. Lovely accent. I'm going with 2 blinds.
😁 Thanks @jamie ross
But how do you get the plastic ball stops off if they're already on the chain without breaking the string? I broke my plastic chain trying to get one that is clasped to 2 balls. No instructions from the company. I had to jerry rig it myself.
I like that
Not the best demo video I have seen. Too much background noise. And the operation of a huge industrial machine was not explained! What on earth was he doing and why ? Not the sort of thing to do at home kids. No mention of how to alter width of blind if that’s at all possible. Could do better
who are here after SCMP ..lean system topic..
😂
Thank you! Great video. Helped us install our roller blinds.
How do I do it or a blind rail without those 2 outer screws please?
Do you mean the screws on the end caps Jennifer? I'm not too sure not knowing which brand it is, but if there are no visible screws we'd expect it to be a clip on cover.
Where can I buy it? Could you please post a link?
www.decorquip.com/product/metal-chain-joining-pliers/
We use a lot this pliers for connecting our chains and also retail it to our clients,just add us if you want, WhatsApp: 008618676983824, Email: [email protected] www.alibaba.com/product-detail/Roller-Blind-Accessories-Connector-Tool-Jointing_1600364783055.html?spm=a2700.galleryofferlist.normal_offer.d_title.7648374cuVQa3P
What is the brand and type for mylar punching and cutting tools. Thanks
Hello, it is our own products on these..... www.decorquip.com/product-category/roller-blinds/tooling-roller-blinds/ - the punch is not shown here, but could get a price on application
This answers all my questions. Thank you. Its all very clear
Great to hear!
my guy giving us 1min 30 sec video and tells us what we need and nothing more THANK YOU !!!
Green in 2018??😂
Glad we made you smile David
What is the width and thickness of the tape being used?
Hi Matthew. Thanks for getting in touch. The width of the mylar tape is 8mm and the thickness about 1mm. Any more questions, give me a shout.
Hello, i go to the Webside company and only have 6mm and 7mm, no 8mm
Definetely 7mm