Пікірлер

• 
  @edmc28 сағат бұрын

  😎

• 
  @danielgharmann9 сағат бұрын

  This is great! One thing I never knew tho is do you turn flex pitch off when you're done tuning just one track?

• 
  @Kredomax13 сағат бұрын

  Thanks for your valuable information. The only thing I missed is the part that has to be done before Logic comes into play. The setup in the Audio-MIDI Setup in Mac OS. If you have a midi interface, you should configure all your synth/keyboard there. This has the advantage that the correct device name is then displayed in Logic and all other programmes. This step may not be necessary when connecting via USB. I am not sure about this point.

• 
  @knuckledustermusic15 сағат бұрын

  ►► Download my free Ultimate Logic Pro Starter Pack at → www.knuckledustermusic.com/logicpro-starter-pack

• 
  @indawgswetrust19 сағат бұрын

  I'm intrigued, but I have a quick question. I thought the whole point of these was to do all the legwork for you regarding the room acoustics. Why is there an EQ feature (@ 8:07)? If I'm listening to the Steven Slate room, but then decide to turn on the eq and bump the low end up a bit, isn't this defeating the whole purpose of the phones and room model? I realize I could just leave the eq off...but why is the option even available in the software if the whole selling point of this is to model the sound of the rooms as they are? If I decided that my mix lacked a little something in the low end, it seems like fixing that in the mix is the solution as opposed to adjusting the room model. Still intrigued, however 😛

• 
  @recordman5552 күн бұрын

  I earned my degree in recording in 2011. I could have never imagined a DAW could do this!

• 
  2 күн бұрын

  cables ?

• 
  @martyedwardsmusic2 күн бұрын

  Another excellent tutorial, clear, concise and informative without being not overly technical. Thank you!

• 
  @knuckledustermusic2 күн бұрын

  Glad you enjoyed it!

• 
  @martyedwardsmusic2 күн бұрын

  VERY helpful, thank you! Just the right amount of detail without getting overly technical, and a pace that works for me. I would love to see you do a video on using Sends On Faders. I know sends can be adjusted using the little rotary Send dial, but I would like to use automation so that I can easily adjust the amount of effect throughout the song. Thanks again, 2 thumbs up!

• 
  @knuckledustermusic2 күн бұрын

  Hi Marty, I’m glad you enjoyed the video! I’ve got another video on automation that you might find helpful which can be found here: kzread.info/dash/bejne/hmt6uM-FlazQn7A.html Cheers Georges

• 
  @martyedwardsmusic2 күн бұрын

  @@knuckledustermusic thanks for the link, Georges. I’ll check it out.

• 
  @Clouseau632 күн бұрын

  This was really helpful - thank you!

• 
  @knuckledustermusic2 күн бұрын

  @@Clouseau63 you’re welcome!

• 
  @joebiancoo3 күн бұрын

  Awesome video! I like the session drummer but I'm having trouble figuring out how to add isolated effects. I only want my snare to have reverb, but I cant figure it out.

• 
  @joebiancoo3 күн бұрын

  I got impatient and didn't wait till the end. Amazing video, I feel like I have a strong grasp on my drum sound now! subscribed

• 
  @knuckledustermusic3 күн бұрын

  Thanks for the support! Glad you found what you were looking for. Cheers Georges

• 
  @stainedredsheetz3 күн бұрын

  Dude the freezing thing helped so much. My newer computer gives me the Overload message so easily and I always resorted to having to bounce in place and delete original track and just hope to god I wouldn’t want to make any more changes…. This is so easy :D

• 
  @knuckledustermusic3 күн бұрын

  Glad to hear it's working for you! Cheers Georges

• 
  @hyde93x354 күн бұрын

  wow that was fantastic thanks! such a great new tool and thanks so much for doing such a clear constructive video. cheers!

• 
  @knuckledustermusic4 күн бұрын

  @@hyde93x35 you’re welcome! Thanks for the kind words. Cheers Georges

• 
  @ericdoziermusic4 күн бұрын

  TRIPLETS! How in the world do you get the drummer to play aa blues shuffle feel. I play gospel and blues and nothing fits and I can't figure it out.

• 
  @knuckledustermusic3 күн бұрын

  Try changing the time signature to 12/8. The retro rock drummer was the closest match for me. Cheers Georges

• 
  @adbmusicify4 күн бұрын

  I followed all these steps exactly--my guitar IS coming through OBS but my tracks from Ableton are not. Guitar is running to Focusrite and into Ableton. Strange....any suggestions?

• 
  @knuckledustermusic3 күн бұрын

  It sounds like you're receiving the signal from your audio interface rather than from the multi-output device (Ableton). If you're using macOS 13 (Ventura) or higher, you can use the new macOS Audio Capture Source. Follow this link for those instructions: obsproject.com/kb/macos-desktop-audio-capture-guide I hope that helps. Cheers Georges

• 
  @adbmusicify3 күн бұрын

  @@knuckledustermusic much appreciated I'll definitely check that out

• 
  @Kooptrot5 күн бұрын

  This helped me so much! Thank you!

• 
  @knuckledustermusic5 күн бұрын

  @@Kooptrot you’re most welcome!

• 
  @amansahota61717 күн бұрын

  Thank you Sir

• 
  @knuckledustermusic5 күн бұрын

  @@amansahota6171 you’re welcome!

• 
  @regularjohnstudios7 күн бұрын

  Super helpful! Anyone able to explain what the Drift Correction box means? I noticed you checked drift correction on for the profile 2626 multichannel. Thanks!!!

• 
  @knuckledustermusic3 күн бұрын

  If the devices in your aggregate device aren’t synchronized using hardware, you need to enable drift correction, also known as resampling, to compensate for drift in the data between devices. So you'll want any software devices (BlackHole or Soundflower) to have drift correction enabled. You can read more about it here: support.apple.com/en-ca/guide/audio-midi-setup/ams094c7edb4/mac#:~:text=Enable%20drift%20correction&text=Choose%20your%20aggregate%20device%20settings,Correction%20checkbox%20for%20each%20device. Cheers Georges

• 
  @regularjohnstudios2 күн бұрын

  @@knuckledustermusic okay thank you!

• 
  @demetriusbeasley8297 күн бұрын

  🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾Thank you!!!!!!

• 
  @knuckledustermusic7 күн бұрын

  @@demetriusbeasley829 you’re welcome!

• 
  @joshgatesmusic787 күн бұрын

  Great video, thank you for all the tips!

• 
  @knuckledustermusic7 күн бұрын

  @@joshgatesmusic78 you’re most welcome!

• 
  @113jayan8 күн бұрын

  how reduse moody effect while using reverb. any tutorial

• 
  @carolinasalahova9 күн бұрын

  How do you get rid of the noise in the backround when you've plugged in your guitar? Also the noise gets worse the more distortion I add😭

• 
  @radhikar352914 күн бұрын

  Thanks, very clear and helpful

• 
  @knuckledustermusic14 күн бұрын

  Thanks so much! It’s very much appreciated! Cheers Georges

• 
  @Maxime-ft3ks15 күн бұрын

  Top lesson, thk you !

• 
  @knuckledustermusic15 күн бұрын

  @@Maxime-ft3ks you’re welcome!

• 
  @flipnap211215 күн бұрын

  another cool thing is to create an alias of the session player to use on multiple tracks. this way you can change the chord track on the fly and everything will follow. then you can mute session player if you want. of course you can just change the AU instrument in the session player itself and create multiple players.. but just another method. thanks for the vid.

• 
  @ralphblundell17 күн бұрын

  Another great video, clear and concise. Thanks George 👍🏽

• 
  @knuckledustermusic17 күн бұрын

  @@ralphblundell thank you! I’m glad you enjoyed it.

• 
  @sumannethakani608018 күн бұрын

  Thank you so much

• 
  @knuckledustermusic17 күн бұрын

  You're most welcome!

• 
  @romeosoroka19 күн бұрын

  didnt know about "remaping" in Drum Machine, thank you!

• 
  @knuckledustermusic19 күн бұрын

  @@romeosoroka you’re welcome!

• 
  @danjoconway20 күн бұрын

  Thank you, good sir!

• 
  @knuckledustermusic19 күн бұрын

  You're welcome!

• 
  @113jayan20 күн бұрын

  I never found such a detailed explanations in logic tutorials grate work 👍👍👍🙏

• 
  @knuckledustermusic20 күн бұрын

  @@113jayan thank you. Glad you found what you were looking for! Cheers Georges

• 
  @LuizAlexandre_lalex20 күн бұрын

  Good video, right to the point

• 
  @knuckledustermusic20 күн бұрын

  @@LuizAlexandre_lalex thank you!

• 
  @LoyalDance20 күн бұрын

  I'm absolutely in love with the new pianos, especially with the pedal noises! ❤

• 
  @knuckledustermusic20 күн бұрын

  @@LoyalDance they sound great!

• 
  @knuckledustermusic20 күн бұрын

  ►► Download my free Ultimate Logic Pro Starter Pack at → www.knuckledustermusic.com/logicpro-starter-pack

• 
  @jimmywellington21 күн бұрын

  i'm probably missing something obvious, but when I try this with a song that's in 6/8, it doesn't like up to the bars.

• 
  @knuckledustermusic19 күн бұрын

  For me, when I first switch to 6/8 it'll keep the current chord track as if it were 4/4. If you delete the chord track and start again then they line up at the beginning of each 6/8 bar. You can move any chord to make it line up wherever you'd like. I hope that helps. Cheers Georges

• 
  @jimmywellington19 күн бұрын

  @@knuckledustermusic Thanks for the reply. That's weird. Every time I've tried, I've done it with a track that started in 6/8. I'll keep messing around with it.

• 
  @knuckledustermusic19 күн бұрын

  @@jimmywellington I wouldn’t be surprised if there’s still some bugs to be worked out.

• 
  @jimmywellington18 күн бұрын

  @@knuckledustermusic It's a great feature. One thing I did with it (I haven't had a chance to watch all of your video, so you might talk about this) is that if you have the chord track set up, you can make a bass session player to play the simplest bass line ever, just whole notes, convert that to midi, and now you have a template to copy for basic midi stuff like pads, etc.

• 
  @josephinealarie22 күн бұрын

  What do I do if I do all of this still and my system is still overloading 😢

• 
  @knuckledustermusic19 күн бұрын

  If you've done all this, closed all other applications, and made sure to have free space on your hard drive, then I'm sorry to say it might be time to look at a faster mac.

• 
  @TomWa22 күн бұрын

  Have you been able to get “articulations” to work once the track is MIDI? The articulations appear, but when I try to apply them, nothing happens.

• 
  @knuckledustermusic22 күн бұрын

  Open the Piano Roll (p), select your midi notes, and then assign the articulations using the pull down list in the piano roll. I hope that helps. Cheers Georges

• 
  @TomWa19 күн бұрын

  @@knuckledustermusic Thank you. This is precisely what I tried to no avail.

• 
  @jmack8423 күн бұрын

  Hello Goerges! great tutorial!! Is there a way to drag and drop an existing piano region from an older logic session into the global track in order to be able to have the session players follow? It's been very cumbersome to recreate my chord progressions in the global chord track. It would be great if you could record directly to the global chord track!

• 
  @knuckledustermusic19 күн бұрын

  Unfortunately this isn't a feature yet. You can play in a chord and Logic Pro will analyze it. So you could play your existing MIDI region bar by bar and have Logic analyze the chords.

• 
  @w4dZ0o23 күн бұрын

  With so many options how do you learn.

• 
  @knuckledustermusic23 күн бұрын

  @@w4dZ0o I suggest starting with only 1 or 2 rooms. Otherwise you’ll find yourself endlessly switching rooms. Cheers Georges

• 
  @markwright-k5d24 күн бұрын

  What an awesome video, you have no idea how much this has helped me! brilliant Keep up the good work

• 
  @knuckledustermusic24 күн бұрын

  Glad to hear you found it helpful! Thanks for the kind words. Cheers Georges

• 
  @Fiveash-Art25 күн бұрын

  Holy crap. I just started messing around with the Logic 11 session bass, and keyboard plugins and they are seriously overloading my system. What the hell? None of my third party plugins do that.. but as soon as I load up the logic bass bass, it's destroying me. I'm on an M1 too .. totally optimized. Changing my buffer and playback does nothing.

• 
  @knuckledustermusic24 күн бұрын

  That's a bummer. All I can suggest is to freeze as many tracks as you can (and close any other applications other than Logic Pro).

• 
  @Fiveash-Art24 күн бұрын

  @@knuckledustermusic Narrowed it down. It's not any of Logic's instruments. It's this Neural dsp amp emulator I'm using. I can't believe what a resource hog this thing is. It's like you have to bounce everything down to even use more than one instance of it. As much hype is out there for Neural dsp .. I can't believe more people aren't complaining about this.

• 
  @hitherescotty25 күн бұрын

  is there a simple way to have it play ONLY downstrokes? i can easily change from fingerstyle to pick but it always does alternate picking. for punk and indie stuff, downstrokes would sound a lot better.

• 
  @knuckledustermusic24 күн бұрын

  If you open up the Studio Bass plugin, go to the top center where it says "Articulation". There's a pull down list and you can select "Down Only". Cheers Georges

• 
  @hitherescotty24 күн бұрын

  @@knuckledustermusic I tried that. It seems to only work for future inputs - like I select that and then when I play new notes on my midi controller they will be downstrokes. That dropdown doesn’t seem to do anything for the session player.

• 
  @knuckledustermusic22 күн бұрын

  @@hitherescotty convert the region to MIDI, and then in the Piano Roll select all your midi notes and assign them using the Articulations pull down menu in the piano roll. I hope that helps. Cheers Georges

• 
  @FloBorge25 күн бұрын

  Any idea why my bass region is automatically set to -12? I can't seem to be able to change that in the region inspector. I could transform to midi but that defeats the session player idea :)

• 
  @knuckledustermusic19 күн бұрын

  Do you mean the volume fader is set to -12 or the output you're seeing is at -12?

• 
  @AliPentland25 күн бұрын

  Is there still a way to 'Populate with Drummer Regions'?

• 
  @knuckledustermusic24 күн бұрын

  They got rid of the "Populate with Drummer Regions" it seems, but If you add "Arrangement" sections in the Global Tracks area and then create a new drummer track, it'll populate each section with a new drummer region. Cheers Georges

• 
  @AliPentland24 күн бұрын

  @@knuckledustermusic Thanks, I'll do that!

• 
  @edmc225 күн бұрын

  😎

• 
  @knuckledustermusic25 күн бұрын

  🤘

• 
  @edmc225 күн бұрын

  Thank you 🙏🏻 great work

• 
  @knuckledustermusic25 күн бұрын

  You’re welcome and thanks!

• 
  @plimsickens26 күн бұрын

  another great video! I have only just started out with the sessions players.

• 
  @knuckledustermusic24 күн бұрын

  Thank you!

• 
  @SasquatchRuston26 күн бұрын

  In logic proX the follow function seemed to be able to keep up much better with a heavier track. I cannot for the life of me get the same "feel" out of the AI drummer from 11, am i just doing something wrong, or is this something that is not the same as it seems to follow slower music better... It was a huge part of how I write, and now, kinda struggling with the new drummer, if he were real, i would fire him...lol

• 
  @knuckledustermusic24 күн бұрын

  Ya you're right the follow does react a bit different in Logic Pro 11. In version 10, "following" would replace any rhythm pattern you had chosen and come up with a new one based on the track you're following. In version 11, the pattern remains selected but things will shift a bit based on the track you're following. So I recommend finding the closest pattern that you're after and then have it follow another track. If you're after something specific then you can input a manual pattern. They replaced all the drummer names too, so you can no longer fire the drummer by name 😂. Cheers Georges

• 
  @Ross_Sandoval27 күн бұрын

  thanks bro you rock straight to the point haha

• 
  @knuckledustermusic27 күн бұрын

  @@Ross_Sandoval you’re welcome!

• 
  @terrencetrotter60727 күн бұрын

  This guy’s lying for views .. this DID NOT work !!!!

• 
  @bungalowbluesman28 күн бұрын

  Hi George, thank you for this. Please could you advise me on a recurrent confusion I have? Basically I sometimes have difficulty getting a good guitar sound with certain amp sims (Amplitude mainly). I'm exploring various variables - but one that I don't fully understand is the role of direct monitoring vs monitoring via Logic. Well that's not quite right, I understand what they are (as in your vid) and I can turn the monitoring on/off in logic (& therefore get an unprocessed signal only). But I'm not sure how to turn of the direct signal ... so suspect I'm getting both signals in my monitors & hence compromising the sound. I'm using a Focusrite 4 pre interface. If I turn of monitoring in the focusrite control software, I just get silence. Please can you help?