ARGCO has everything you need for your next piping, plumbing or fire sprinkler project. We have over 7,000 quality products to fit your needs. Email [email protected] any of your questions or inquiries.
If on Dry Pipe, great idea to close Tamper. Just a precaution. Just Sayting
@jagsingh83246 күн бұрын
Good video but too loud music
@jacoblefebvre9262Ай бұрын
Can it remove them too?
@pelayorojas5305Ай бұрын
Cuál es su precio
@thomascollins75764 ай бұрын
How far can the wire reach
@DOPEandTAPE4 ай бұрын
Wooooo
@TheAshleigh30005 ай бұрын
Pinholes in the Stainless steel model. Supposedly my fault they said I must have laid it on a bunch of nails? Not happy.
@hellapellanyc64657 ай бұрын
Hi would this work for 1" stainless boat tubing?
@PepperWilliams_songcovers8 ай бұрын
Good video, crappy music!
@tacoman681910 ай бұрын
I need 2 of these yesterday
@newoldvideos98910 ай бұрын
Those things are a Pain in the ASS when you have to change a ceiling tile.. The wingnuts stick out so far you cant get the tile to seat, especially if you have suspension wires on the opposite side of the sprinkler mount... It is nearly impossible to change a ceiling tile without breaking it, and if you unclamp the one side there is no way to reattach it once the tile is in place if there is a light on that side... Total Nightmare !
@tarekmohammedalabsi222710 ай бұрын
Iam in ksa and I need spare parts For machine like this
@creasybear169811 ай бұрын
I got to give this a try.
@MrMegaFredZeppelin11 ай бұрын
Fire Sprinklers Save Lives🔥💧🚒🧑🏻🔧ROCK ON!!!!!!!🤘🏻🤙🏻✌🏻
@paulhillenbrand5647 Жыл бұрын
They are in stock in FORT SMITH, ARKANSAS... Give your sales rep a call and place your order.
@ThomasBurner Жыл бұрын
Best Groover I've got my hands on.
@user-vo7zr2ow9z Жыл бұрын
Awesome Groovers!!!
@xIxPaTr10TxIx Жыл бұрын
Our company purchased one recently and have been using it for a week now and this morning it wouldn’t turn on. We believe it might be the general relay “ice cube relay” has anyone else had this problem?
@douglashicks653 Жыл бұрын
Mine has given me 20 years, from Grainger.
@GrizzlieMan Жыл бұрын
No sound foo
@markjones5968 Жыл бұрын
....and without words! rocked it bro!
@tangsoojim Жыл бұрын
Wow that’s a great feature
@commercialelectrician1332 жыл бұрын
Great video you should make one explaining the grease fitting and where the great gos
@codydaniel83122 жыл бұрын
So you don't have to open an inspectors test or auxiliary drain, to allow good air flow?
@dicko-2006 ай бұрын
at first yes, then close it for vacuum.
@fitter54232 жыл бұрын
So you stand on the opposite side of the machine and the machine operates in forward instead of typically going in reverse to groove. I bet that turns people off about this just based off that.
@mechanicman33052 жыл бұрын
Yes, It seems like that lol but I do it the reverse way it seems a bit more natural this looks too much lol
@hellohello85562 жыл бұрын
Is this ok to use ona vehicles rear diferential drain bolt?
@gillplbgandhtg12 жыл бұрын
For me it would be useless without a 45 degree bubble
@savvyoptician38552 жыл бұрын
no pipe dope or tape?
@fitter54232 жыл бұрын
I guess you’ve never heard of “For training purposes only”.
@JonDingle3 жыл бұрын
Seeing this has given me an idea!
@dannoncastilaw45423 жыл бұрын
Y disnt u teurn ur stuff around and cut ..and let u drop hit the floor than letn ur machine and pipe hit the ground
@dannoncastilaw45423 жыл бұрын
U a stupid fck u didnt show no body nutn
@fitter54233 жыл бұрын
Same thing as a pilot clamp.
@seanboulden6426 Жыл бұрын
Seems to be improved. I like the idea of being able to swap out the guide sleeve without having to take the clamp off the pipe. Hole too small? No problem! Plus, if I'm understanding this correctly, this one can be used on a 4" pipe. The one I have maxes out on 3" pipe
@jimpguezjimmy65303 жыл бұрын
I just ordered one like five minutes ago
@robertg63392 жыл бұрын
How do you like it?
@MrMegaFredZeppelin3 жыл бұрын
1" IGS couplings, tee's and 90's can be a pain but just like anything you adjust :-) This Groover is easy to use :-) A "BIG" thumbs up :-) ROCK ON!!!!!!!
@MrMegaFredZeppelin3 жыл бұрын
A "BIG" thumbs up :-) Fire Sprinklers Save Lives!!!!!!! ROCK ON!!!!!!!
@timbradley88904 жыл бұрын
Agreed. I bought this and the LZ1 model (green) and I have the same issue. What direction/orientation should the laser holder face? In coordination with the flat part of the level? In line with the viles? Great invention if we could get assistance with this issue.
@argco13 жыл бұрын
Tim. Argco will replace your LZ1. Give us a call 800-854-1015. (The new laser faces the opposite direction of where you screw into the fitting)
@timbradley88902 жыл бұрын
Just saw this. I'm in the Saddlebrook NJ location very often. I'll see if they will swap it for the red model if I remember to bring it in.
@diegodelgado97644 жыл бұрын
I need to get a 1/2x3/4 nipple for this
@ramanachintu45814 жыл бұрын
More fire line videos pls
@2slofouru5 жыл бұрын
This could be good for high performance vehicle bays
@TheRealFOSFOR5 жыл бұрын
why are these so friggin expensive?!
@kamrujjamanbinnur55145 жыл бұрын
Price?
@TheElectriciansToolChannel6 жыл бұрын
Thank you for your comment, I”m an electrician having one of these would be great if it worked properly. If you had to spend your own money on this tool would it be worth it ? Thank you sir, I will be waiting on your reply.
@jacobsebastien3910 Жыл бұрын
Still waiting bro?
@rickmadden057 жыл бұрын
Our company purchased these laser levels for us but for some reason I can't figure out on how to leave the laser set.I am aware it comes with an Allen wrench but you twist the laser to turn it on the laser moves out of place which then gives you incorrect visual measurements.I had left mine set but you can spin it and you can see the laser will be way off.please help!
@piotrekw90537 жыл бұрын
If you are using @Victaulic couplings (like on this video) you need to measure depth on the groove. You can not just put a coupling on the grooved pipe. This is wrong and can cause system malfunction.
@twychopen228 жыл бұрын
I can't hear what he is saying over the music.
@StopDropandLOL10 жыл бұрын
What type of Sprinkler system is that? I always assumed ones with large escutcheons like that were dry type.
@Flatline7414 жыл бұрын
why use this? I can do it just as fast with a hack saw and no burrs' as well
@ptrnorth15 жыл бұрын
yea, my company got two of these, they work good for about a month, till the cutting dies get dull.
@StopDropandLOL16 жыл бұрын
It looks a lot easier than shoving a wedge in there.
Пікірлер
If on Dry Pipe, great idea to close Tamper. Just a precaution. Just Sayting
Good video but too loud music
Can it remove them too?
Cuál es su precio
How far can the wire reach
Wooooo
Pinholes in the Stainless steel model. Supposedly my fault they said I must have laid it on a bunch of nails? Not happy.
Hi would this work for 1" stainless boat tubing?
Good video, crappy music!
I need 2 of these yesterday
Those things are a Pain in the ASS when you have to change a ceiling tile.. The wingnuts stick out so far you cant get the tile to seat, especially if you have suspension wires on the opposite side of the sprinkler mount... It is nearly impossible to change a ceiling tile without breaking it, and if you unclamp the one side there is no way to reattach it once the tile is in place if there is a light on that side... Total Nightmare !
Iam in ksa and I need spare parts For machine like this
I got to give this a try.
Fire Sprinklers Save Lives🔥💧🚒🧑🏻🔧ROCK ON!!!!!!!🤘🏻🤙🏻✌🏻
They are in stock in FORT SMITH, ARKANSAS... Give your sales rep a call and place your order.
Best Groover I've got my hands on.
Awesome Groovers!!!
Our company purchased one recently and have been using it for a week now and this morning it wouldn’t turn on. We believe it might be the general relay “ice cube relay” has anyone else had this problem?
Mine has given me 20 years, from Grainger.
No sound foo
....and without words! rocked it bro!
Wow that’s a great feature
Great video you should make one explaining the grease fitting and where the great gos
So you don't have to open an inspectors test or auxiliary drain, to allow good air flow?
at first yes, then close it for vacuum.
So you stand on the opposite side of the machine and the machine operates in forward instead of typically going in reverse to groove. I bet that turns people off about this just based off that.
Yes, It seems like that lol but I do it the reverse way it seems a bit more natural this looks too much lol
Is this ok to use ona vehicles rear diferential drain bolt?
For me it would be useless without a 45 degree bubble
no pipe dope or tape?
I guess you’ve never heard of “For training purposes only”.
Seeing this has given me an idea!
Y disnt u teurn ur stuff around and cut ..and let u drop hit the floor than letn ur machine and pipe hit the ground
U a stupid fck u didnt show no body nutn
Same thing as a pilot clamp.
Seems to be improved. I like the idea of being able to swap out the guide sleeve without having to take the clamp off the pipe. Hole too small? No problem! Plus, if I'm understanding this correctly, this one can be used on a 4" pipe. The one I have maxes out on 3" pipe
I just ordered one like five minutes ago
How do you like it?
1" IGS couplings, tee's and 90's can be a pain but just like anything you adjust :-) This Groover is easy to use :-) A "BIG" thumbs up :-) ROCK ON!!!!!!!
A "BIG" thumbs up :-) Fire Sprinklers Save Lives!!!!!!! ROCK ON!!!!!!!
Agreed. I bought this and the LZ1 model (green) and I have the same issue. What direction/orientation should the laser holder face? In coordination with the flat part of the level? In line with the viles? Great invention if we could get assistance with this issue.
Tim. Argco will replace your LZ1. Give us a call 800-854-1015. (The new laser faces the opposite direction of where you screw into the fitting)
Just saw this. I'm in the Saddlebrook NJ location very often. I'll see if they will swap it for the red model if I remember to bring it in.
I need to get a 1/2x3/4 nipple for this
More fire line videos pls
This could be good for high performance vehicle bays
why are these so friggin expensive?!
Price?
Thank you for your comment, I”m an electrician having one of these would be great if it worked properly. If you had to spend your own money on this tool would it be worth it ? Thank you sir, I will be waiting on your reply.
Still waiting bro?
Our company purchased these laser levels for us but for some reason I can't figure out on how to leave the laser set.I am aware it comes with an Allen wrench but you twist the laser to turn it on the laser moves out of place which then gives you incorrect visual measurements.I had left mine set but you can spin it and you can see the laser will be way off.please help!
If you are using @Victaulic couplings (like on this video) you need to measure depth on the groove. You can not just put a coupling on the grooved pipe. This is wrong and can cause system malfunction.
I can't hear what he is saying over the music.
What type of Sprinkler system is that? I always assumed ones with large escutcheons like that were dry type.
why use this? I can do it just as fast with a hack saw and no burrs' as well
yea, my company got two of these, they work good for about a month, till the cutting dies get dull.
It looks a lot easier than shoving a wedge in there.