The First time you tried to twist stainless clamp on a plastic fitting would probably break not the stainless clamp
@user-hc6ro7mq5x14 күн бұрын
One country is all people
@SantoshMaskare-pw9iv15 күн бұрын
❤❤
@homeimprovement811920 күн бұрын
It doesn’t work that well now lol 😂
@AlMai22225 күн бұрын
Wow. What brand manual press was that?
@TeamTnA4426 күн бұрын
Atleast they stubbed out copper. Love ❤️ it when they stub out cpvc😂😢😅
@malcolmtanner7700Ай бұрын
No!
@nmlindon20Ай бұрын
Good job one of the best!!
@sweetdrahthaar7951Ай бұрын
I just ditched all my copper plumbing. Too many leaks.
@NSTQuangThaiАй бұрын
❤
@c.5536Ай бұрын
My classmates are being arrested. They werent supposed to go to University. Their homes and their belongings are supposed to be drained. They used the California laws to scare people away. They fucked it up with Hispanics Catholic influence on law enforcement and learning resources. Tech companies are probably going to arrest them for felonies.
@c.5536Ай бұрын
That was the line of work for my classmates. The Hispanics lawyers provided race based rewards and law enforcement to arrest people to keep their goals alive. They did it on purpose by watching the childrens relationships. You cant learn withoit relationships. Juvenile Hall was designed to put Latinos in there to prevent them from stealing friendships to harm the learning environment. 😅
@Spacepeanut80Ай бұрын
What’s the company name? Sharkbite plumbing 😂
@irfanfaridАй бұрын
😂😂😂
@robsilveria2729Ай бұрын
Great technology but not cheap
@RespectAllFearNoneАй бұрын
Sharkbite recently refind themselves with sharkbite max, they have stainless steel hubs and i guess they're now rated to be installed behind walls also, supposedly the push force is easier
@heybabe8438Ай бұрын
Not being a professional hole driller but i did stay at a Holiday Inn Express once and approve of the heart thumping action in this exceptional educational video.
@justinross2656Ай бұрын
I mean i normally just listen for the double click lol but that works too
@williamaltoon73Ай бұрын
Why use shark bite pex to pex.
@irfanfaridАй бұрын
Why not?
@user-mn9cd4uw6rАй бұрын
Huufff no sabes cuánto necesitaba eso siempre cuando hago tubería olvídelo el desbloqueador
@gusuave007Ай бұрын
The way that drywall is moving, I'd say take it all down.
@kuttmowfАй бұрын
There are always new ways to do the same job. But this is dumb. So I guess buy a hand held pump n a pack of balloons. If that don't work. Use a pack of Magnums and blow air into it.
@irfanfaridАй бұрын
😂
@dadegixxerАй бұрын
Oohie when you catch your finger with the wire
@donbeggs9147Ай бұрын
You're old
@irfanfaridАй бұрын
😉😉
@jeromegarcia5396Ай бұрын
Who the fk puts a rough in inches from the floor tho 🤦🏽♂️
@simonhancock1903Ай бұрын
Pure crap
@jaysonshystyАй бұрын
Garbage
@chris_758Ай бұрын
Very clever 🧐 Even more clever, STAY AWAY FROM SHARKBITE ALTOGETHER
@riello2362Ай бұрын
We shall see how long they last compared to soldering, and how long it will take before nobody can solder a pipe. Also a very expensive tool for dummies. This is one way that the manufacturer and the plumbing board creates failures for sales.
@irfanfaridАй бұрын
I mostly agree with you and this is true for everything that is manufactured in the current time, made to expire so we keep buying more from this greedy capitalist world.
@FrankNStein-ww9gnАй бұрын
If im not mistaken this is how to lose another 10mm socket
@tehpurplepillsАй бұрын
you're supposed to chamfer shark bites and mark it with a deptch guage lmao? bet 95%+ of installers dont. I love shark bite crimp fittings, and love PE/pex. hate unneccesary fittings. pex allows you to run a single pipe, and they have $2 brackets to bend and support a 90 in them
@indianlittlepuff0013Ай бұрын
Chuttiye location check to hole kr k bhi ho jaegi 1 mm ka itna lamba q ktna
@dambrennАй бұрын
Can I get your number so I can avoid you?
@alvinhunt6616Ай бұрын
stronger than some 2x4? find that hard to believe
@irfanfaridАй бұрын
Ok try it and let it completely dry and make another patch by placing sheet rock piece stud to stud. Then punch through both of them and then you will realize this patch is harder to penetrate because it’s practically double the wall.
@brianc3481Ай бұрын
I can see what you mean since it overlaps but the balloon isn't practical especially with insulation or something in the wall being sharp or a bigger void but it's cool
@irfanfaridАй бұрын
@@brianc3481 I used the balloon in the video just to make it more entertaining, since it’s KZread, but there are other ways to do this. Here is one way: kzread.infou2FXtacRMS8?si=qqyfLkQp1ZJOwS1q
@danielwollin4143Ай бұрын
No way a robot could finesse that task . It's way more dynamic than you think to do it evenly
@sharonpersinger6162Ай бұрын
Doesn't help if it stop when the hole begins so what you did with the extra piece of wood was completely unnecessary
@irfanfaridАй бұрын
You completely missed it, watch the video again.
@wm0104Ай бұрын
Turd
@GameVirus9833Ай бұрын
It would just be easier to have a piece of wood behind it to support it.
@jhonattanospinagomez2072Ай бұрын
🤔🤔🤔
@irfanfaridАй бұрын
😊😉😎
@psyience3213Ай бұрын
Good technique
@internalharmАй бұрын
Break off the tab and a little pry 😂
@steveshook7331Ай бұрын
Pair of side cuts work great for me
@irfanfaridАй бұрын
This is hardened steal, the side cutter won’t cut through them easily. I give it a try anyways. 😊
@MrGenosflyАй бұрын
Just stop using them. Get some uponor cheapskate.
@willdavis2964Ай бұрын
I like it, but I would angle the edges of. wall and patch so there is more mud to bind the two.
@markphillips6154Ай бұрын
Just put three screws on the inside of the circle, so that the saw fits snuggly over them, and it will guide itself in without having to put on that brace thing
@irfanfaridАй бұрын
That works well but I personally this way is faster but if you want it centered then the three screws are better. Here is a video I did using three screw method last year:kzread.infoy8T-ICN3lI0?si=c2N2j_91YXG88Qr9
@rotarycomptechАй бұрын
Nice hack, job you ever ever heard of a torch and solder
@irfanfaridАй бұрын
😊kzread.infoi_6_RQI5uas?si=U_NKoo0kdqzymIki✌️😎😉
@rotarycomptechАй бұрын
Garbage connection but it’s good enough for you
@irfanfaridАй бұрын
Hate and jealousy always brings out negativity. 😊😎
@rotarycomptechАй бұрын
@@irfanfarid Iam not jealous of that kind of hackary
@irfanfaridАй бұрын
@@rotarycomptech you’re in denial.🤣
@rotarycomptechАй бұрын
@@irfanfarid and you’re just a plumber with plumbing skills only
@irfanfaridАй бұрын
@@rotarycomptech 😊✌️take care🤗😊✌️
@rotarycomptechАй бұрын
Why would you post such stupid videos?
@irfanfaridАй бұрын
To get people like you to comment.😊😎
@rotarycomptechАй бұрын
Press, fit junk and you think you’re a rocket scientist
Пікірлер
Mavalinga
The First time you tried to twist stainless clamp on a plastic fitting would probably break not the stainless clamp
One country is all people
❤❤
It doesn’t work that well now lol 😂
Wow. What brand manual press was that?
Atleast they stubbed out copper. Love ❤️ it when they stub out cpvc😂😢😅
No!
Good job one of the best!!
I just ditched all my copper plumbing. Too many leaks.
❤
My classmates are being arrested. They werent supposed to go to University. Their homes and their belongings are supposed to be drained. They used the California laws to scare people away. They fucked it up with Hispanics Catholic influence on law enforcement and learning resources. Tech companies are probably going to arrest them for felonies.
That was the line of work for my classmates. The Hispanics lawyers provided race based rewards and law enforcement to arrest people to keep their goals alive. They did it on purpose by watching the childrens relationships. You cant learn withoit relationships. Juvenile Hall was designed to put Latinos in there to prevent them from stealing friendships to harm the learning environment. 😅
What’s the company name? Sharkbite plumbing 😂
😂😂😂
Great technology but not cheap
Sharkbite recently refind themselves with sharkbite max, they have stainless steel hubs and i guess they're now rated to be installed behind walls also, supposedly the push force is easier
Not being a professional hole driller but i did stay at a Holiday Inn Express once and approve of the heart thumping action in this exceptional educational video.
I mean i normally just listen for the double click lol but that works too
Why use shark bite pex to pex.
Why not?
Huufff no sabes cuánto necesitaba eso siempre cuando hago tubería olvídelo el desbloqueador
The way that drywall is moving, I'd say take it all down.
There are always new ways to do the same job. But this is dumb. So I guess buy a hand held pump n a pack of balloons. If that don't work. Use a pack of Magnums and blow air into it.
😂
Oohie when you catch your finger with the wire
You're old
😉😉
Who the fk puts a rough in inches from the floor tho 🤦🏽♂️
Pure crap
Garbage
Very clever 🧐 Even more clever, STAY AWAY FROM SHARKBITE ALTOGETHER
We shall see how long they last compared to soldering, and how long it will take before nobody can solder a pipe. Also a very expensive tool for dummies. This is one way that the manufacturer and the plumbing board creates failures for sales.
I mostly agree with you and this is true for everything that is manufactured in the current time, made to expire so we keep buying more from this greedy capitalist world.
If im not mistaken this is how to lose another 10mm socket
you're supposed to chamfer shark bites and mark it with a deptch guage lmao? bet 95%+ of installers dont. I love shark bite crimp fittings, and love PE/pex. hate unneccesary fittings. pex allows you to run a single pipe, and they have $2 brackets to bend and support a 90 in them
Chuttiye location check to hole kr k bhi ho jaegi 1 mm ka itna lamba q ktna
Can I get your number so I can avoid you?
stronger than some 2x4? find that hard to believe
Ok try it and let it completely dry and make another patch by placing sheet rock piece stud to stud. Then punch through both of them and then you will realize this patch is harder to penetrate because it’s practically double the wall.
I can see what you mean since it overlaps but the balloon isn't practical especially with insulation or something in the wall being sharp or a bigger void but it's cool
@@brianc3481 I used the balloon in the video just to make it more entertaining, since it’s KZread, but there are other ways to do this. Here is one way: kzread.infou2FXtacRMS8?si=qqyfLkQp1ZJOwS1q
No way a robot could finesse that task . It's way more dynamic than you think to do it evenly
Doesn't help if it stop when the hole begins so what you did with the extra piece of wood was completely unnecessary
You completely missed it, watch the video again.
Turd
It would just be easier to have a piece of wood behind it to support it.
🤔🤔🤔
😊😉😎
Good technique
Break off the tab and a little pry 😂
Pair of side cuts work great for me
This is hardened steal, the side cutter won’t cut through them easily. I give it a try anyways. 😊
Just stop using them. Get some uponor cheapskate.
I like it, but I would angle the edges of. wall and patch so there is more mud to bind the two.
Just put three screws on the inside of the circle, so that the saw fits snuggly over them, and it will guide itself in without having to put on that brace thing
That works well but I personally this way is faster but if you want it centered then the three screws are better. Here is a video I did using three screw method last year:kzread.infoy8T-ICN3lI0?si=c2N2j_91YXG88Qr9
Nice hack, job you ever ever heard of a torch and solder
😊kzread.infoi_6_RQI5uas?si=U_NKoo0kdqzymIki✌️😎😉
Garbage connection but it’s good enough for you
Hate and jealousy always brings out negativity. 😊😎
@@irfanfarid Iam not jealous of that kind of hackary
@@rotarycomptech you’re in denial.🤣
@@irfanfarid and you’re just a plumber with plumbing skills only
@@rotarycomptech 😊✌️take care🤗😊✌️
Why would you post such stupid videos?
To get people like you to comment.😊😎
Press, fit junk and you think you’re a rocket scientist
That’s hearsay
What a waste of time get a life