Пікірлер

• 
  @whoknow29323 күн бұрын

  Wew... it's really working again. I was really suprise. Thank you.

• 
  @michaelolayinka44117 күн бұрын

  Mine started with a flashing black screen and now no signal can it be a bad port

• 
  @Jos6128x20 күн бұрын

  Are there any replacement for the rubber thumb sticks? I have seen the whole thumb stick on Amazon but I don't if it will fit

• 
  @KylesTinkering18 күн бұрын

  Unfortunately, none that I've seen for these. You might be able to swap the entire analog stick, desolder the old one, with a replacement that would fit the aftermarket replacement gameube thumb caps. The depth of the replacement caps might be too high or low though

• 
  @Poizon_SSBU2 ай бұрын

  cheap sticks that you find on amazon do not work properly, they feel too gummy. and, the stick rubber tends to wear away very quickly.

• 
  @KylesTinkering2 ай бұрын

  They aren't perfect, they're not like the original ones, but you can't get OEM thumbsticks from Nintendo. The alternative is keep using the original thumbstick that has no rubber at all left, or torn/missing chunks. They still look nice (color slightly off) and feel fine. Only real problem I've had is the internal hole is deeper than the original, which is why I'm using the UV curing glue to add a little bit of height to the stick. Also gotten away with using a little, tiny, ball of blu tack. Also helps to prevent the thumbstick from lifting up and down

• 
  @davymaekelberg2 ай бұрын

  My Xbox one X no longer wants to boot to mainscreen... Stuck on 26016.1002.amd64fre.rs_cbox_dev_flight.231211.2030, which is OS 10.0.26016.1002 Official one released now is 10.0.25398.4478... So does this mean I need to wait till an OS higher than 10.0.26016.1002 is released till I can restore the Xbox again?

• 
  @KylesTinkering2 ай бұрын

  Not sure about that one. Usually if it gets stuck on doing an update just wiping the HDD and rebuilding it fixes it. Don't think waiting for a higher update would do anything

• 
  @joshuaaguilar49052 ай бұрын

  what kind of soldering iron do you use ?

• 
  @KylesTinkering2 ай бұрын

  KSGER T12. A variety of different tips and around $40

• 
  @420SmokezzYT2 ай бұрын

  A simple pry tool under the battery and a careful pry of it will remove it every time.

• 
  @MR-KingOfSeduction3 ай бұрын

  Hi bro,if HDMI port doesnt work,if i buy cablr for and connect does it gonna work…to show picture on tv,by the way great video! :D

• 
  @user666khrx3 ай бұрын

  I changed its HDMI, but I didn't understand what the update had to do with it.

• 
  @KylesTinkering3 ай бұрын

  Been a while since I did this but I think I might have had to replace the HDD at the beginning. I usually scan the HDDs to make sure there's no errors/warnings or bad sectors. Almost all of the PS3s I've worked on have bad HDDs, just due to age

• 
  @RenatoVargas3 ай бұрын

  Well, this was completely useless.

• 
  @crn443 ай бұрын

  mine has black light but no display

• 
  @STARMADE3364 ай бұрын

  Yeah I’m jus finna throw my shii away

• 
  @AmostheArtman4 ай бұрын

  Thank you so much for making this vid!! I Had a C stick that was bouncing all over the place and pulling in the opposite direction when I used it, but thanks to your vid I was able to clean up the contact points and now it works like new. thank you so much dude!!

• 
  @steveokay88104 ай бұрын

  CY = Cypress Semiconductor.

• 
  @SteveDrilly4 ай бұрын

  This tutorial is fake if you try and unscrew a thumb stick it fucking breaks

• 
  @jasondillon24625 ай бұрын

  Tried this a few days ago. It didn't go well. First i couldn't get the solder to melt to remove the port. Eventually i got it by ripping it the rest of the way off. Then the holes where it seats had too much solder in them and i couldn't get the new port seated properly. I barely got it attached finally but it's still not in the holes as good as it should be. I'm just gonna put it back together and hope for the best but yeah i probably screwed it up worse. What heat gun is that your using? I think i ordered the wrong one. It was a mini heat gun and it wouldn't even melt the solder at all. For my first attempt at soldering id say i pretty much blew it.

• 
  @KylesTinkering5 ай бұрын

  Those ground pins suck up a lot of heat, so it does need a good solder iron with a good tip at a pretty high heat. I was probably doing the soldering iron around 400C The hot air station is some generic 858D. Been a while since I bought it but you should be able to find one for under $40 and it's been worth the investment

• 
  @jasondillon24625 ай бұрын

  @@KylesTinkering I also thought about buying a solder sucker. My problem is there's still hard solder stuck in the pin holes and i can't for the life of me get it out so i can Seat the port correctly. I tried poking the soldering iron through the holes but a couple of the anchor points got a little tore up. Now i have a feeling the whole board or at least the part where you put the port is trashed. If i could just get those holes unplugged. At least if i attempt this again I'll have a better grasp on how to properly do this. The soldering part is easy. Removing unwanted solder, that's the tricky part.

• 
  @KylesTinkering5 ай бұрын

  @@jasondillon2462 Solder wick, flux, and a hot iron should get the ports out. If the wick isn't getting it add more solder till it's filled the hole and just keep trying

• 
  @jasondillon24625 ай бұрын

  @@KylesTinkering Been trying that. The solder just won't stay melted and almost immediately hardens again. I've tried flux, and solder wick. I got the anchor points cleared out but those little tiny holes you plug the hdmi port into won't come clean. Only thing else i can figure is maybe a solder sucker might do it.

• 
  @KylesTinkering5 ай бұрын

  @@jasondillon2462 Worst case, if the holes don't clear out, just let them stay filled and use the hot air to melt the solder in the holes while you insert the new port into the board.

• 
  @TheWebstaff6 ай бұрын

  Have a like for the big Clive shout out!! 😂

• 
  @littlejo19866 ай бұрын

  Do you have a video on what to do when the arms for the button are broken? Button clicks, but the shoulder is snapped

• 
  @stevenhensman25416 ай бұрын

  Sorry, my friend let me tell you again. I have a 24 vote. Power pack on the lead it's got around black nozle. It's round and it's black. What does it do? Can I cut that off? Thank you

• 
  @stevenhensman25416 ай бұрын

  Hello, my friend. I was just wondering. I have a 24 vote, little power pack. It's on the one of the Leeds. It's got a round black nod rule. What does it do I always wondered what it does while it's for

• 
  @IDEAFYI6 ай бұрын

  How do you get off the thumb stick like I've been trying for ages

• 
  @elrobert28587 ай бұрын

  Nice build!

• 
  @m.a.p.60397 ай бұрын

  Great vid man!

• 
  @abdulrazaqalyami43807 ай бұрын

  I enjoyed every minute of this video, Good job sir and keep up the good work.⭐️

• 
  @Notfiveo08 ай бұрын

  That is a lithium ion cell.

• 
  @keithkimbark90298 ай бұрын

  My first video from you. I like your style and enjoy fixing things myself. I have one suggestion though. Sometimes you go a little too fast in explaining some things. I know you are fixed on "youtube" time, but some things do get lost. But all-in-all, GREAT content.

• 
  @Evilslayer738 ай бұрын

  Hi do you install the bootloader on you pro mini?

• 
  @KylesTinkering8 ай бұрын

  The ones I've purchased already come with the bootloader. If it doesn't though, you can use another preloaded arduino to program other arduinos and load the bootloader. There's also dedicated boards you can get for loading MCUs

• 
  @lfsmxpumplfsxpump30539 ай бұрын

  Well Thxs but twisting the joystick off completely snapped the inside no clue how but yeah Thxs very much should of just felt with it not clicking bc not I ain’t got a working controller 😢

• 
  @Lakjager10 ай бұрын

  Hey, i got one recently and drifted after only 3 months, i want to replace the stick with the hall effect ones from guili kit, would this be possible?

• 
  @Deepmeditation2410 ай бұрын

  Can you fix my ps4 slim because it is not turning on and can you get it out of rest mode because i am selling it thx.

• 
  @Boop__Doop10 ай бұрын

  i have a similar problem in mine but the screen turns green and sounds like a tesla coil with a low hz

• 
  @Eddiiie66610 ай бұрын

  Trying to fix stuff sounds like a great name for a You Tube channel.

• 
  @azogderschander639111 ай бұрын

  Thank you for this very detailed and extensive video! Although i couldn't save my friend's PS4 Slim

• 
  @sucy943611 ай бұрын

  YOU SAVED MY LIFE THANK YOU

• 
  @damianhoyos16311 ай бұрын

  Pudiste solucionar el problema ?

• 
  @sasasimunovic7709 Жыл бұрын

  Everything was good until "desoldering by scraping" 11:26. WTF was that?

• 
  @fadibokinno3465 Жыл бұрын

  I turned it on amd then it turned off by itself and it wont trun on i tried everything i changed the cords and the outlet and it still wont turn on

• 
  @kiwis4168 Жыл бұрын

  Can I pay u to fix mine?

• 
  @ranzkyle8027 Жыл бұрын

  fake

• 
  @michaeltheiii Жыл бұрын

  52:15 thank you. I was having trouble reassembling and it was because I also had the screw in the wrong hole.

• 
  @m.a.p.60397 ай бұрын

  Same lol

• 
  @dj_donnychronic Жыл бұрын

  Just so you know u need to use high percentage rubbing alcohol to get rid of the stickiness and most of the smell

• 
  @jaimecarrillo2250 Жыл бұрын

  What kind of hard drive should I buy? I’ve tried several hard drives that read as good but I keep getting errors. It’s frustrating. It will load sometimes and but other times it goes to error screen.

• 
  @mike5293 Жыл бұрын

  My ps4 only turns on from the controller and not the console

• 
  @KylesTinkering Жыл бұрын

  The power button is bad. If it's a slim or pro it's on its own little daughter board, super easy to swap out. If it's an original it'll be soldered to the motherboard, which I've done a video on

• 
  @RCDEPENDANT Жыл бұрын

  If yiu shine a torch on the screen you will see everything, but it's extremely dim, but it's just enough to do what you need to do, I had to do it it deregister a primary account, I learned this trick through tv repair

• 
  @Harvz78 Жыл бұрын

  I messed up the board trying to desolder the hole.

• 
  @Harvz78 Жыл бұрын

  What did you use to desolder? I wish it shows on the video. Desoldering is the most difficult part, specially the one clogged up the hole.

• 
  @KylesTinkering Жыл бұрын

  The xbox controller has a pretty big ground plane, which sucks up a lot of heat. I've taken them off with hot air, and then cleaned up the holes using a solder sucker or braid To make it faster, I just use the soldering iron (about 400C) and solder sucker. Otherwise I'd have to take the green PCB off the board to use the hot air. Plus the hot air might melt the plastics, and I was trying to just swap the button on this

• 
  @sim_lmbr Жыл бұрын

  What temp did you use to remove the stick, and what tools did you use ?(solder braid, solder pump...?) This thing seems impossible to remove. Alternatively, would you consider using hot air for this process ? Thank you !

• 
  @KylesTinkering Жыл бұрын

  The xbox controller has a pretty big ground plane, which sucks up a lot of heat. I've taken them off with hot air, and then cleaned up the holes using a solder sucker or braid To make it faster, I just use the soldering iron (about 400C) and solder sucker. Otherwise I'd have to take the green PCB off the board to use the hot air. Plus the hot air might melt the plastics, and I was trying to just swap the button on this

• 
  @sim_lmbr Жыл бұрын

  ​@@KylesTinkering thanks for the fast answer ! I'm trying to do the same as you, only change the button, so I might avoid using hot air. But my solder sucker doesn't seem powerful enough to remove the solder. Do you have any buying advice for this particular tool ? Again, thanks for replying so quickly

• 
  @KylesTinkering Жыл бұрын

  @@sim_lmbr add a big glob of solder to all the points and move your iron across them while pulling the analog. Use something like a flat screwdriver to wedge under the analog because the metal will get very hot. Should wiggle out. Then just apply the soldering iron and sucker until you clear the holes

• 
  @lfsmxpumplfsxpump30539 ай бұрын

  @@KylesTinkeringThxs for helping me destroy my controller rip left joy stick just completely snapped

• 
  @stevenrobnett7390 Жыл бұрын

  Yes I am currently doing this now and one I have for parts I completely disassembled down to the fram and screen that ribbon runs under and is most likely all one assembly

• 
  @stevenrobnett7390 Жыл бұрын

  The story I have about these 2 switches omg

• 
  @AndreaGarcia-gq9ke Жыл бұрын

  My son’s L3 button is having the same issue. Unfortunately we did not purchase warranty when we got the controller. We do not have the tools to do what you did. Would you have a go-to or any info on getting it replaced?

• 
  @KylesTinkering Жыл бұрын

  There are people that offer this repair service on eBay, ship it, they fix it, and gets shipped back. I believe Microsoft will also do it, just not free under the warranty You could also call some local shops (electronic repair/phone repair/game stores) and see if they are able to do it. Just look out for reviews before going with them The last ditch effort, sell off the controller as parts/not working on eBay and buy another. See which option is easier/cost effective

• 
  @petesaguy1707 Жыл бұрын

  I need to pot tweak my Laser. Can it be done without the device that gives readings? I don't have one. I just want to know if it's safe to just use a small screwdriver to tweak?

• 
  @KylesTinkering Жыл бұрын

  You can turn the pot in very small increments until you get it to work. If it doesn't work, it could be the laser is just too far gone