Пікірлер

• 
  @therandoms.enoughsaid.16625 күн бұрын

  i have a 40 year old xj600 & it`s sometimes terrible at starting, i`ve always wanted a CB900F, i had a cb750f, cb600f & a 500 twin my 500 use to start easy you just needed to push the kickstart about 4 or 5 inches & it fired up every time, i love the old bikes ?

• 
  @plan-bmotos5 күн бұрын

  Any reason why XJ600 don’t want to start? Have to ask as I have that XJ750 project also. 😂 I love old bikes too, but then again I also love my 2005 bandit. Well it’s also old but not that old… 😂

• 
  @EtoniaSupertest6 күн бұрын

  I've never seen this model before, what a sweet bike. ..in Canada we had 900F and 750F and Hondaline fairings but never seen this paint and wheels (on a 900) before, what a beauty, glad it's being revived

• 
  @plan-bmotos5 күн бұрын

  I think this Bol d’or is same as 900f and 900 supersport (USA) it was just named like that in Europe. Not sure about fairings if they were optional in Europe too.

• 
  @b12kult6 күн бұрын

  This video couldn't have come at a better time, this just made me want to get on (at last) on the CB900F that's just waiting to be revived and is patiently waiting in my garage.

• 
  @plan-bmotos5 күн бұрын

  That is nice to hear! 🙌 Just go for it mate! 😊

• 
  @GoldenEraHondaProduceGarage8 күн бұрын

  Awesome video, I've got an 83 cb1000c and an 82 cb900f.... I've turned the cb1000c into a cafe racer and got it up and running but I haven't got the CB900 out of the shed but this video is definitely a motivation... I'll be excited to see this project continue

• 
  @plan-bmotos8 күн бұрын

  Thank you! Inhave to decide what I will do with it. I’m turning to resto mod track style. But not sure yet. Have to finnish my CB750 caferacer and XJ750 Scrambler too… 😂

• 
  @hotvideo189014 күн бұрын

  B

• 
  @plan-bmotos13 күн бұрын

  Thanks, that what I did!

• 
  @Virago_XV15 күн бұрын

  Found a potential XJ750 project on OfferUp, any tips?

• 
  @plan-bmotos14 күн бұрын

  Just basic checks, does it run? How long it has been stationary. Any accodents in history etc.

• 
  @SpiderEsVm20 күн бұрын

  Plan B

• 
  @plan-bmotos20 күн бұрын

  Thats what I did! 🙌

• 
  @SouthWestCafeRacersАй бұрын

  B end off

• 
  @plan-bmotos28 күн бұрын

  B it was, what you mean by end off? 😊

• 
  @Kj-qv1wtАй бұрын

  Plab B

• 
  @plan-bmotosАй бұрын

  Thanks mate! Thats what I did! 🙌

• 
  @TINKcustomsАй бұрын

  Nice work as usual :)

• 
  @plan-bmotosАй бұрын

  Thanks mate!

• 
  @TINKcustomsАй бұрын

  Excellent, looks fun!

• 
  @plan-bmotosАй бұрын

  It was, too bad my camera work was learn state as well! 😂

• 
  @EgilSterkrАй бұрын

  Top speed?

• 
  @plan-bmotosАй бұрын

  160kmh was on my gps., but not on that lap. Maybe next week I go again!

• 
  @JDMCUSTOMS365Ай бұрын

  Nice idea 💡

• 
  @plan-bmotosАй бұрын

  Thank you! 🙌

• 
  @jeffrybuang9187Ай бұрын

  Plan A

• 
  @plan-bmotosАй бұрын

  Thank you! I might consider that!

• 
  @TINKcustomsАй бұрын

  Looks too comfortable for a cafe racer seat! Nice work.

• 
  @plan-bmotosАй бұрын

  I tested it and it really feels quite good. Now Inhave to find someone to make leathers to it…

• 
  @RobertHiggins-gv5jc2 ай бұрын

  Nice 👍... The music was driving me crazy.... I did watch the whole video though....

• 
  @plan-bmotos2 ай бұрын

  Thank you for the comment and for your spend time to watch it throug. Sorry to hear about music, but I really appreciate honest opinion! 🙌

• 
  @TINKcustoms2 ай бұрын

  Nice work, especially the flow into the tank line

• 
  @plan-bmotos2 ай бұрын

  Thanks, there will be issues to be solved with that design as I want to route exchaust beside seat and under side panel… 😄

• 
  @waynemelanson67902 ай бұрын

  Honda gas tank and Kawasaki motor 🎉

• 
  @plan-bmotos2 ай бұрын

  Almost, but only rims and front end are from Kawasaki! 🤟

• 
  @JDMCUSTOMS3652 ай бұрын

  Looking good mate

• 
  @plan-bmotos2 ай бұрын

  Thank you! 👍

• 
  @JDMCUSTOMS3652 ай бұрын

  Cool idea, I also have a seat catch video check it out 👍

• 
  @plan-bmotos2 ай бұрын

  Thanks mate! I will, I have to figure out seat catch for my CB

• 
  @markopuikkonen99222 ай бұрын

  Nice to get back on building! Or should I say editing and building…😂

• 
  @plan-bmotos2 ай бұрын

  🤟

• 
  @user-qs6ic4of6o2 ай бұрын

  B

• 
  @plan-bmotos2 ай бұрын

  That’s what I did!

• 
  @lelyroby2 ай бұрын

  B

• 
  @plan-bmotos2 ай бұрын

  That’s what we did!

• 
  @Sopikachu_20232 ай бұрын

  ❤❤❤❤ hermoso proyecto !!!

• 
  @plan-bmotos2 ай бұрын

  Thank you!

• 
  @raulcarreon27513 ай бұрын

  B

• 
  @markopuikkonen99223 ай бұрын

  Thanks! That what I did!😊

• 
  @plan-bmotosАй бұрын

  🙌

• 
  @smallgaragebigdreams60323 ай бұрын

  What foam are you using I'm about to start mine and I wanna make sure I get firm enough foam

• 
  @plan-bmotos3 ай бұрын

  Thank you for comment! I have not select foam for CB but i started to make set to my XJ scrambler while ago. For that bike I chose compoud foam. You can find it in different thickness and also rating kg/cm3. I think mine is 80kg/m3 and it feels ok to sit on. After driving it first time my arse will tell me if it was correct choice. This material was messy to form, and also bit difficult. So i might consider traditional foam that has also kg/m3 ratings for my CB

• 
  @Self-developed8094 ай бұрын

  Hey brother. I know I asked you before but lost it. Whats the rear rim off from? Tire size and do I need to change the bearings to fit the shaft? Do I need extra spacers. Sorry for the long list

• 
  @plan-bmotos4 ай бұрын

  No worries mate! Rim is from 2006 Kawasaki 750. Original shaft fits but spacers need some adjustment to get tyre centered. You also need offset front sproket to get chain line correct.

• 
  @AZ-qn3xq4 ай бұрын

  Good work! I am working on my bike too. What battery do you use? Can you share the model or store link? Thank you

• 
  @plan-bmotos4 ай бұрын

  Thank you! I have lithium battery that goes under the hump. Mine is aliant ultralight YLP09X. It might be bit on small side but I hope the momentary starting power is enough. Sorry but cant find the store anymore, but you can find one via Google.

• 
  @AZ-qn3xq4 ай бұрын

  Thank you!@@plan-bmotos

• 
  @mattikinnari76715 ай бұрын

  🎶👍

• 
  @plan-bmotos5 ай бұрын

  Kiitos! 🤟

• 
  @aldrinrivero6 ай бұрын

  Plan B

• 
  @plan-bmotos6 ай бұрын

  Thanks mate ! Thats was what I did also!

• 
  @TINKcustoms6 ай бұрын

  Nice chop mate!

• 
  @plan-bmotos6 ай бұрын

  Thanks mate!

• 
  @user-kh2tv3be5r6 ай бұрын

  Plan B

• 
  @plan-bmotos6 ай бұрын

  Thanks mate! Thats what I did!

• 
  @Adyan-jc4yx6 ай бұрын

  B

• 
  @plan-bmotos6 ай бұрын

  Thnk you, that was exacly ehat I did!

• 
  @user-dv7pd4ki9h6 ай бұрын

  Dude I know ur working on it when u can but please post more with better angles I wanna see this thing finished I check in like everywhere day

• 
  @plan-bmotos6 ай бұрын

  Thanks mate! I try to make it as as I finnish yamaha seat. I wanted to train seat foam work on other bike first. 😀

• 
  @dangagnon7346 ай бұрын

  Nice work! I got also an XJ. It is nice to see some build from that bike. Are you planning on using the original wiring?

• 
  @plan-bmotos6 ай бұрын

  Thank you! I’m going to go with NWT X21 box. I might use some of the original wiring, but there was minor meltdowns in it… 🙂

• 
  @dangagnon7346 ай бұрын

  @@plan-bmotos Never knew about NWT, I might consider this for mine also! Thanks!

• 
  @plan-bmotos6 ай бұрын

  @dangagnon734 You are most welcome!

• 
  @TINKcustoms6 ай бұрын

  Nice tyres. Meanwhile I see your boy is making a gun. You need to keep him busy and out of mischief!

• 
  @plan-bmotos6 ай бұрын

  Thank you, not sure how those act on pavement but i plan to drive this in gravel mostly! Yes he does samurai swords, guns and knives from wood and from lego bricks… 😂

• 
  @MrBuckleBuns7 ай бұрын

  Confetti flavored seat

• 
  @plan-bmotos7 ай бұрын

  😄 That would be something different, this is only the foam tho. 😊

• 
  @Self-developed8097 ай бұрын

  Hows this project going? Can you help a newbie in the build world on how to mount the carburetors on this bike?

• 
  @plan-bmotos7 ай бұрын

  Hi there and thank you for comment and question! This bike is under the blanket atbthe moment as I have been super busy real work. I’m also currently learning how tonmake seat on my Yamaha project. 😀 What comes to mounting carbs, I have episode that shows the process. If you have any questions just ask! kzread.info/dash/bejne/l4GEprZvY8eyhpc.htmlsi=Dkg5V1tImut5dodB

• 
  @Self-developed8097 ай бұрын

  @@plan-bmotos you are awesome. Ty so much!

• 
  @AceCafeBikes7 ай бұрын

  Better, Josh is a good guy

• 
  @plan-bmotos7 ай бұрын

  It’s always good to get feedback. Some times I come blind to my decisions… 😃

• 
  @noahgipson33747 ай бұрын

  Plan B

• 
  @plan-bmotos7 ай бұрын

  Yes! Thats what I did!

• 
  @nisch760847 ай бұрын

  Plan B

• 
  @plan-bmotos7 ай бұрын

  Thank you for the comment! That was what we did!

• 
  @jayshreekhaire33198 ай бұрын

  Plan b

• 
  @plan-bmotos8 ай бұрын

  Thanks mate! That was exactly what I did!

• 
  @joshmay68098 ай бұрын

  This gives me some good ideas! I’m surprised you didn’t try to blend it into the lower hole on the tank to bring them together

• 
  @plan-bmotos8 ай бұрын

  Thats nice to hear! I’m planning to trim that side hole off from tank and make side panels to it. I thinked about blending it but seat would be quite wide from front after that. Injist might take another look tho… 😂 Thanks for the comment!

• 
  @user-fg1bm7sp5z8 ай бұрын

  B, btw what gas tank is that?

• 
  @plan-bmotos8 ай бұрын

  Gas tank is from this bike. 1983 CB750C

• 
  @TINKcustoms8 ай бұрын

  Great job

• 
  @plan-bmotos8 ай бұрын

  Thanks mate!

• 
  @TINKcustoms8 ай бұрын

  nice job!

• 
  @plan-bmotos8 ай бұрын

  Thank you!

• 
  @TINKcustoms8 ай бұрын

  Fantastic😀

• 
  @plan-bmotos8 ай бұрын

  I’m Not happy with it yet… 🤷‍♂️

• 
  @wildsnaturalwoodworks39978 ай бұрын

  EVERYONE does plan-B when building a Cafe Racer. Have your first baby

• 
  @plan-bmotos8 ай бұрын

  Well that is true. I did too! 🫣 Maybe next time I’ll do something different… 😉

• 
  @theblueyamaha18 ай бұрын

  Coming along great!

• 
  @plan-bmotos8 ай бұрын

  Thank you! It’s been bit slow for few weeks. Too much real work! 😂