Ang alam ko sir puedi ang shotgun ng slug tangalin lang yung choke or ang pinaka mababang choke
@shadow6996Ай бұрын
Do you have a Green Card?
@florenciorodrigoalvarado17302 ай бұрын
Buenas tardes por favor que marca es ña mora
@earltalatala2 ай бұрын
Titolo
@sethtrujillo1192 ай бұрын
So it has the same bolt pressure pattern as a lee Enfield? It's not "hard" to pull the bolt but "harder" to push the bolt close?
@earltalatala2 ай бұрын
Sorry i have no idea re enfield but its hard to pull the bolt because the pin hadnt cycled yet but if its "cocked" already it is easy, pushing seemed harder because of the angle before closing but after awhile youll get the trick
@Logjam52 ай бұрын
To bad the Jets didnt make it further this year. Have the same on order
@MkmeOrg2 ай бұрын
Where did you order through?
@carguy19792 ай бұрын
That’s the one thing I think they could have done better, that magazine.
@deanflewelling87023 ай бұрын
You're going to scare away all the deer with that shiny stock lol just kidding looks really nice 👌
@earltalatala3 ай бұрын
😄 honestly i think its more better with the flat one, maybe if i got my deer with this rifle ill sand it down
@tdjohnskyАй бұрын
@@earltalatala 0000 steel wool will take of the shine to make it a satin finish. Then if you want more shine, just take a rag with mineral spirits and wipe it down for a shine.
@fredgrunder63483 ай бұрын
Before you buy one, try and get an extra mag. I have NOT been able to find one anywhere. They are nice rifles, very bad customer service.
@earltalatala3 ай бұрын
I already bought it, not really in a hurry to have another mag but ill try to get one
@patrickgallagher43444 ай бұрын
How did you get your bolt to run this smooth? Mine doesn’t
@earltalatala4 ай бұрын
It is like that already straight from the box,i only put a little bit of gun oil, how about yours? It might need a little oil, is it fit well or it wiggle if you shake it with your hand?
@sylviacandler55412 ай бұрын
@@earltalatala Slip 2000 on the bolt makes it slick as a hound's tooth!
@juanzamora52184 ай бұрын
How you get that stock to shine like that. Nice looking rig
@earltalatala4 ай бұрын
Tru-oil for wood stocks
@stevenhall93494 ай бұрын
Wish I could afford one
@earltalatala4 ай бұрын
Its one of the cheapest bolt rifle
@AlwaysRedHunting4 ай бұрын
cool gun ✌
@jaydee51564 ай бұрын
Looks great. I love glossy stocks on my vintage hunting rifles with their gloss blued steel. Even the scopes have a gloss finish. The patterning in the Turkish walnut is incredible, so I want to keep my 334 with the original look. I'll likely do nothing more than wax to maintain the finish. The Stevens 334 is an outstanding value.
@earltalatala4 ай бұрын
Agree
@venzondelacruz27824 ай бұрын
Bro kmusta? Saan lugar yang gun range?
@venzondelacruz27824 ай бұрын
Very nice…
@blackbirdpie2174 ай бұрын
That mag only holds 3 rounds and still protrudes. But it does seem like a great budget rifle.
@agricola4 ай бұрын
A small gripe
@earltalatala4 ай бұрын
Yes because its single file style, they have 5 rounds mag too
@JCAGLoftandAnimals5 ай бұрын
Does it shoot good
@earltalatala5 ай бұрын
Havent tried it yet, its still winter and havent renewed my gunrange membership, maybe 2weeks from now ill try it out
@earltalatala2 ай бұрын
Yes it shoot amazing
@Christ425 ай бұрын
Smart move on going with the 308! Fantastic rifle. Clean it before use and treat it with G96 work the bolt for about 5 minutes and she will skate like a blade on ice. If you find your getting bolt drag let me know! There tends to be a high spot I’ll show you were to fix that issue
@earltalatala5 ай бұрын
Thanks, my bolt just slide so easy,i read about some that are having issues with it,im glad mine is ok,thanks
@earltalatala5 ай бұрын
Thanks for the comment, my bad, its a failure to extract not squibload, as i mentioned (i think) i change brand of ammo and problem gone
@jasonlopez48557 ай бұрын
How much better is the new over the old one like the old ones are going feeling for me like Ruger American but like the Savage Axis XP two better. Like wood better but love how light Savage is in my 30-06. I've always cut my stocks to fit me. Just wondering 🧐
@Drevenwick10 ай бұрын
You have to press both at the same time. I have the same one
@Drevenwick10 ай бұрын
Press the bolt release and the trigger to get the bolt out. Its the same way to install the bolt
@jesseramon488010 ай бұрын
Sweet!!!!!!! Excellent rifle for the $$$$$$ With a great scope and Great ammo It is very accurate Without spending the thousands of $$$$$$$ dealers want you to spend
@earltalatala10 ай бұрын
agree, i only fire a few shots in the range whenever i have this rifle.so accurate and not choosy with ammo
@user-bw9mx4vo5d10 ай бұрын
Cómo se puede configurar ..el mío marca erróneo las yardas
@earltalatala10 ай бұрын
Long press and it will change km to yards and vice-versa
@bigbobg809111 ай бұрын
It’s so good to see a dad shooting with his daughter.
@earltalatala11 ай бұрын
Thank you
@Steezy.gunz_ Жыл бұрын
How much ?
@earltalatala10 ай бұрын
i paid almost $800 canadian dollar
@Balaclavaballistics Жыл бұрын
That is a rifle you can depend on.
@luisdelacruz4904 Жыл бұрын
Nice loving mine very accurate enjoy
@earltalatala10 ай бұрын
totally agree, so powerful and affordable price
@fciavarra Жыл бұрын
THIS VIDEO IS NOT ACCURATE!! IT IS NOT INTENDED TO BE REMOVED. I talked to Savage about this and that spacer is part of their design. (Really deceiving) The rifle was on sale and I made the mistake of thinking that the spacer was part of their "Accufit" style stocks. THEY ARE NOT! You cannot shorten the LOP on these stocks at all. The only way you can customize the fit is with that specific Accufit system. It's very confusing why Savage would even make stocks with a spacer if they were not intended to be shortened. Terrible design on Savage and very confusing marketing. The rifle was on sale so I made the mistake of buying one based on this video and a few others. I bought it for my son for his birthday and now I am stuck trying to somehow modify it. I am sure I can figure something out but just warning to everyone else that is just as confused as I am with Savage's design.
@earltalatala Жыл бұрын
I shorten my stock and thats it man, plain and simple,i don't care what savage says
@chrisquintana387711 ай бұрын
I can be done , but not without cutting up the butpad and cutting screws down.
@jimlundrigan6192 Жыл бұрын
What are the chokes. Improved cylinder, bore cylinder or fujj
@earltalatala Жыл бұрын
All three
@dannystephens7246 Жыл бұрын
A little audio explanation would have been nice. Couldn't tell from the video but it appears that is a phillips screwdriver,
@BrianDonner-si1hi Жыл бұрын
Good gun review! Thank you!
@ExploreAmerica Жыл бұрын
👍
@airbiscuit5101 Жыл бұрын
It would be nice if you could do a follow up video where you leave the spacer out and show how well the but pad fits up against the stock. Will it fit in the stock and screw in without trimming? Is there enough material on the recoil pad to grind a bit off the bottom so it matches the stock profile where they meet?
@adamgessner6380 Жыл бұрын
No doesn't fit at all with spacer removed. Just tried it hr or so ago
@airbiscuit5101 Жыл бұрын
@@adamgessner6380 Bummer
@bigfightfreak Жыл бұрын
Thanks for the video. Are the screws too long with the middle spacer out? I read that you had to cut the bottom inside or dremel it out to get that to work
@earltalatala Жыл бұрын
hi.you know what? i havent tried to screw it all the way.but if its too long then yeah, cutting it or using a shorter screws will do.thanks for the comment anyway
@rab386 Жыл бұрын
Yes the screws are too long with the spacer out. I tried that in the field had just put the spacer back in.
@dohboy4571 Жыл бұрын
The middle spacer has grooves, so the rubber pad doesn’t fit sadly
@howardtaylor9109 Жыл бұрын
Loved seeing that father daughter bonding time, which proves that daughters can have just as much fun as sons shooting as well as learning valuable skills. Thank you for you and your daughters video.
@earltalatala Жыл бұрын
Thank you Sir
@kenneth08004 Жыл бұрын
thank you
@earltalatala Жыл бұрын
ur welcome,and thanks to you too
@ps2paulywalnutz439 Жыл бұрын
is your yards off to
@earltalatala Жыл бұрын
All is fine.yards & km
@davecody59972 жыл бұрын
Good work u guys !!!
@dinnerwithfranklin24512 жыл бұрын
Thanks for this.
@nogod71842 жыл бұрын
Guns, like everything else, sold by names. Ruger 10/22 is NOT better than Savage 64F but almost twice the price. I had the 64FX for $119.99, half of that of a Ruger 10/22. Extremely accurate, reliable with some minor disadvantages like the awkward magazine release.
@intj29482 жыл бұрын
I like the Savage. Just as accurate for way less the $$$.
@earltalatala2 жыл бұрын
I agree on the price. But if you have both then you will know that ruger is more accurate
@intj29482 жыл бұрын
It’s a fun rifle. Just don’t forget to clean it after every 200 rounds. I’ve put over 300 rounds through mine without any issues.
@jeffreymilosevich19572 жыл бұрын
i got savage 64 looking a 10/22 take down soon thank you
@earltalatala2 жыл бұрын
Just a headstart about 10/22 its so thick compared to 64f. Its shorter also but maybe bcoz mine is a 10/22 carbine Woodstock.thats the only things i am not so happy with.but accuracy was super
@mbjclives2 жыл бұрын
Even more important than the accuracy of the rifles,,, I really appreciate what you are sharing with your daughter!
@earltalatala2 жыл бұрын
Thank u. Gunsafety and discipline is a big part in responsible gun ownership. It has to be learned even at young age specially here in canada where hunting is part of the culture.
@markwickk2 жыл бұрын
Iv had both..the ruger .more complex..good shooter..a solid 22. The stevens 62. Simple design ..light weight..only lacking high cap. Magazines..just as good as any ruger..my favorite is the ol stevens..be safe
@earltalatala2 жыл бұрын
Agree. Ruger 10/22 has that name for being top in accuracy quality and versatility.
@AvroBellow2 жыл бұрын
The Model 64 is the most iconic Canadian gun ever made. If you look on your barrel it will say "Made in Lakefield, Omtario, Canada".
@earltalatala2 жыл бұрын
I have no doubt the old versions of model 64 must be very respectable. As always, the new versions with composite stock and cheap price arent that good anymore. The rule of Quality and price.
@im2820082 жыл бұрын
Would of been nice to have the book explain to twist the bolt lever to unlock it. I figured it out though
@earltalatala2 жыл бұрын
Hahaha.actually it has to be pulled up/sideway
@indigenousliving36582 жыл бұрын
I just picked one up, can't wait to get it sighted in! It feels well balanced and easy to hold steady.
Пікірлер
Kumakain ba yan nang slug
Ang alam ko sir puedi ang shotgun ng slug tangalin lang yung choke or ang pinaka mababang choke
Do you have a Green Card?
Buenas tardes por favor que marca es ña mora
Titolo
So it has the same bolt pressure pattern as a lee Enfield? It's not "hard" to pull the bolt but "harder" to push the bolt close?
Sorry i have no idea re enfield but its hard to pull the bolt because the pin hadnt cycled yet but if its "cocked" already it is easy, pushing seemed harder because of the angle before closing but after awhile youll get the trick
To bad the Jets didnt make it further this year. Have the same on order
Where did you order through?
That’s the one thing I think they could have done better, that magazine.
You're going to scare away all the deer with that shiny stock lol just kidding looks really nice 👌
😄 honestly i think its more better with the flat one, maybe if i got my deer with this rifle ill sand it down
@@earltalatala 0000 steel wool will take of the shine to make it a satin finish. Then if you want more shine, just take a rag with mineral spirits and wipe it down for a shine.
Before you buy one, try and get an extra mag. I have NOT been able to find one anywhere. They are nice rifles, very bad customer service.
I already bought it, not really in a hurry to have another mag but ill try to get one
How did you get your bolt to run this smooth? Mine doesn’t
It is like that already straight from the box,i only put a little bit of gun oil, how about yours? It might need a little oil, is it fit well or it wiggle if you shake it with your hand?
@@earltalatala Slip 2000 on the bolt makes it slick as a hound's tooth!
How you get that stock to shine like that. Nice looking rig
Tru-oil for wood stocks
Wish I could afford one
Its one of the cheapest bolt rifle
cool gun ✌
Looks great. I love glossy stocks on my vintage hunting rifles with their gloss blued steel. Even the scopes have a gloss finish. The patterning in the Turkish walnut is incredible, so I want to keep my 334 with the original look. I'll likely do nothing more than wax to maintain the finish. The Stevens 334 is an outstanding value.
Agree
Bro kmusta? Saan lugar yang gun range?
Very nice…
That mag only holds 3 rounds and still protrudes. But it does seem like a great budget rifle.
A small gripe
Yes because its single file style, they have 5 rounds mag too
Does it shoot good
Havent tried it yet, its still winter and havent renewed my gunrange membership, maybe 2weeks from now ill try it out
Yes it shoot amazing
Smart move on going with the 308! Fantastic rifle. Clean it before use and treat it with G96 work the bolt for about 5 minutes and she will skate like a blade on ice. If you find your getting bolt drag let me know! There tends to be a high spot I’ll show you were to fix that issue
Thanks, my bolt just slide so easy,i read about some that are having issues with it,im glad mine is ok,thanks
Thanks for the comment, my bad, its a failure to extract not squibload, as i mentioned (i think) i change brand of ammo and problem gone
How much better is the new over the old one like the old ones are going feeling for me like Ruger American but like the Savage Axis XP two better. Like wood better but love how light Savage is in my 30-06. I've always cut my stocks to fit me. Just wondering 🧐
You have to press both at the same time. I have the same one
Press the bolt release and the trigger to get the bolt out. Its the same way to install the bolt
Sweet!!!!!!! Excellent rifle for the $$$$$$ With a great scope and Great ammo It is very accurate Without spending the thousands of $$$$$$$ dealers want you to spend
agree, i only fire a few shots in the range whenever i have this rifle.so accurate and not choosy with ammo
Cómo se puede configurar ..el mío marca erróneo las yardas
Long press and it will change km to yards and vice-versa
It’s so good to see a dad shooting with his daughter.
Thank you
How much ?
i paid almost $800 canadian dollar
That is a rifle you can depend on.
Nice loving mine very accurate enjoy
totally agree, so powerful and affordable price
THIS VIDEO IS NOT ACCURATE!! IT IS NOT INTENDED TO BE REMOVED. I talked to Savage about this and that spacer is part of their design. (Really deceiving) The rifle was on sale and I made the mistake of thinking that the spacer was part of their "Accufit" style stocks. THEY ARE NOT! You cannot shorten the LOP on these stocks at all. The only way you can customize the fit is with that specific Accufit system. It's very confusing why Savage would even make stocks with a spacer if they were not intended to be shortened. Terrible design on Savage and very confusing marketing. The rifle was on sale so I made the mistake of buying one based on this video and a few others. I bought it for my son for his birthday and now I am stuck trying to somehow modify it. I am sure I can figure something out but just warning to everyone else that is just as confused as I am with Savage's design.
I shorten my stock and thats it man, plain and simple,i don't care what savage says
I can be done , but not without cutting up the butpad and cutting screws down.
What are the chokes. Improved cylinder, bore cylinder or fujj
All three
A little audio explanation would have been nice. Couldn't tell from the video but it appears that is a phillips screwdriver,
Good gun review! Thank you!
👍
It would be nice if you could do a follow up video where you leave the spacer out and show how well the but pad fits up against the stock. Will it fit in the stock and screw in without trimming? Is there enough material on the recoil pad to grind a bit off the bottom so it matches the stock profile where they meet?
No doesn't fit at all with spacer removed. Just tried it hr or so ago
@@adamgessner6380 Bummer
Thanks for the video. Are the screws too long with the middle spacer out? I read that you had to cut the bottom inside or dremel it out to get that to work
hi.you know what? i havent tried to screw it all the way.but if its too long then yeah, cutting it or using a shorter screws will do.thanks for the comment anyway
Yes the screws are too long with the spacer out. I tried that in the field had just put the spacer back in.
The middle spacer has grooves, so the rubber pad doesn’t fit sadly
Loved seeing that father daughter bonding time, which proves that daughters can have just as much fun as sons shooting as well as learning valuable skills. Thank you for you and your daughters video.
Thank you Sir
thank you
ur welcome,and thanks to you too
is your yards off to
All is fine.yards & km
Good work u guys !!!
Thanks for this.
Guns, like everything else, sold by names. Ruger 10/22 is NOT better than Savage 64F but almost twice the price. I had the 64FX for $119.99, half of that of a Ruger 10/22. Extremely accurate, reliable with some minor disadvantages like the awkward magazine release.
I like the Savage. Just as accurate for way less the $$$.
I agree on the price. But if you have both then you will know that ruger is more accurate
It’s a fun rifle. Just don’t forget to clean it after every 200 rounds. I’ve put over 300 rounds through mine without any issues.
i got savage 64 looking a 10/22 take down soon thank you
Just a headstart about 10/22 its so thick compared to 64f. Its shorter also but maybe bcoz mine is a 10/22 carbine Woodstock.thats the only things i am not so happy with.but accuracy was super
Even more important than the accuracy of the rifles,,, I really appreciate what you are sharing with your daughter!
Thank u. Gunsafety and discipline is a big part in responsible gun ownership. It has to be learned even at young age specially here in canada where hunting is part of the culture.
Iv had both..the ruger .more complex..good shooter..a solid 22. The stevens 62. Simple design ..light weight..only lacking high cap. Magazines..just as good as any ruger..my favorite is the ol stevens..be safe
Agree. Ruger 10/22 has that name for being top in accuracy quality and versatility.
The Model 64 is the most iconic Canadian gun ever made. If you look on your barrel it will say "Made in Lakefield, Omtario, Canada".
I have no doubt the old versions of model 64 must be very respectable. As always, the new versions with composite stock and cheap price arent that good anymore. The rule of Quality and price.
Would of been nice to have the book explain to twist the bolt lever to unlock it. I figured it out though
Hahaha.actually it has to be pulled up/sideway
I just picked one up, can't wait to get it sighted in! It feels well balanced and easy to hold steady.