Hello, My name is Mr.X & I'll be posting videos weekly on gun reviews, paracording, how too videos with guns, cooking videos but only when I get great recipes, follow up videos from old reviews and if you support the 2nd Amendment? Then I think you will like it here, so join the Pew-Pew Family and Subscribe to stay in contact/see future and current Videos! When I'm not making videos you can find me Working on power lines, Because Im an Electrical line man and I've been a lineman since 2013! Before line work I used to work on cars by day and I was a karate Instructor by night for 6 years! Ive been working/tinkering on anything that moves ever since I can remember! I Love Fixing or modifying just about anything! I just wanna say thank you! Glad you enjoy the videos, because Little X and I love making videos and have lots of fun! I really enjoy the comments good or bad? I know theres things I can do better/Improve on, so keep the comments coming! Until next time & Thank you for watching!!
Пікірлер
I flattened a .22 casing and used that to shim mine. Bent off the cap and it fits like a glove.
Heritage...please listen to this. People have to shim your hammer tensioner to get your revolver to work properly. Please fix this. I bought my rough rider and on day 1 out of the box half the rounds were light strike misfires. Thought I had a dud pin but realize the hammer was striking too soft. Please please please, fix this problem on all your new productions.
Hey there. This was a pretty decent review. Thanks for posting. Maybe you can grow more from a couple of things... In your first part inside and after coming back from the range, you used "um and um and um" over and over. Maybe you felt nervous or didn't plan what you'd be saying? Outside seemed so much more normal. You seemed relaxed and like you knew what you wanted to say. Also, in my opinion, if you are doing review videos you should definitely get a Lyman trigger pull gauge. They are not expensive and would seem much more reputable. LASTLY, I think it would have been great for everyone if you just quickly swapped the recoil spring after the first 100 rounds, then you could have talked about the reliability change (if any) and the feel, because I'm definitely still curious about that. I hope you accept this as positive criticism that can help you grow. Great job putting the video together. Thanks for providing this material for the community.
Have you ever tested to see if the shadow systems comp will fit on a factory gen 5 glock slide? Im just curious if its possible.
I have not, because I don’t have a gen 5 Glock to try it on! It would be very close and if you figure it out before me let me know please? I hope you stay in contact and thank you for watching!
The back pages of my manual covers the competition model including disassembly and all the included optics plates.
And that is cerakoted that is black that is not metal that paint job is done on purpose that is exactly what Taryn wanted to give it more of a shadow effect that is not a mess up that is not a screw up that is done on purpose
Yeah they did that paint job on purpose because Taryn wanted it to be more pronounced ridges so it's not cerakoted there to give it a shadow look
I’m thinking M & P between 4 and 4.6 barrels! Is it a big difference in accuracy and muzzle flip?
No very minimal difference in accuracy/ muzzle flip. Will it be better with the 4.6 yes, but most shooters will barely be able to tell a difference. If your only gonna hip carry get the 4.6! If your gonna try and conceal 4 will definitely be easier and more comfortable depending on carry position. I hope you stay in contact and thank you for watching!
It is my edc love it found the trick too the ftf and ll bought mine did not shoot right away. Racked it left the slide back for 30 hrs never ever failure anything.
Thank you for sharing and if you ever have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
Question about the optic, I installed my holosun but it seems like the screws wouldn't tighten. Did you have the same issue?
I have so many optic screws it’s crazy, but I just found two in my collection that were the right thread and length to work! Sounds like you will have to get longer bolts! I hope you stay in contact and I hope you keep me posted on what happens? Until next time and thank you for watching!
@@pewpewswithmr.x thanks for the reply, I am going to check with Canik, maybe they can send me the correcr screws, I had some that fit but who knows. I'll let you know what Canik says.
@mattbabich8096 sounds good and thank you!
Love your vibes bro
Thank you and if you ever have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
Meh!! I like most guns but never owned or care to own a Canik. but nice review.
Stupid, waste of time,,,,🥕🥕
I had miss fires (light hammer strike) on mine. After seeing this video I gave it a try . I'll be damn it actually works. So far so good thanks for this DIY trick
I’m happy you got yours all fixed! If you ever have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
Just purchased a 9 inch and shot 100 of the crappiest ammo I could find and had zero issues… is this problem something that happens later on in the rough riders lifespan or what???
I suppose after many rounds of shooting you may see light primer strikes! The issues I was having stems from out of spec hammer springs resulting in light hammer strikes on the primer. I hope you keep me posted if you ever have problems. If you ever have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
Hard to believe he didn't know the carakote shadowing was intentional.
You are correct, but I have noticed other TTIs that have a better shadowing job than mine! My so called shadowing looks bad compared to others I have looked at! I will make a future video showing my experience in this matter! I hope you stay in contact and thank you for watching
Read your ammo box. The CCI has a warning that it should NOT be used in ported/compensated guns.
Interesting, because I would never think a company like CCI would ever make ammo that wasn’t able to be used for all applications. Thank you for sharing and I hope you stay in contact! Until next time and thank you for watching!
Did you ever reach out to Canik? If so what did they say?
No I have not, but I have noticed other TTIs and different stories have a better shadowing job than mine! I will make a future video showing my experience in this matter! I hope you stay in contact and thank you for watching!
So this gun has a ported barrel and the thing on the end is more of a removable barrel weight than it is a comp. That being said the ported barrel combined with the weight as designed produces a similar effect to that of a comp
What screws did you use to mount your Holosun optic? The screws that came in the mini gun tool kit or the screws that came with your optic???
I used The screws that I had in my collection that worked perfect. Another guy commented saying that canik told him he had to buy longer screws to make it work. If you have any other questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
@@pewpewswithmr.x Thanks for the reply/feedback!!! Yeah I contacted Canik directed and here’s there email statement… Response from Canik: Juan (Century Arms) Jul 9, 2024, 13:50 EDT Please use the screws that came with the SRO. The manual is currently being updated to state this.
"We got about 5 inches right there. You can see the bulge" 🫡
I owe you a case of beer, for real. Dad has had one of these since I was little. Always had problems with it. Never could get it fixed. So my dumb ass buys one when I'm of age, and it maybe shoots 60 rounds before having the same issue. Brother, I just shot 18 consecutive rounds for the first time in a long time. I can not wait to fix my pop's. I will for real cashapp you $20 for alcohol, this video just got my pistol out of the closet after 5 years.
It’s no problem brother I’m just glad you were able to get your guns working! If you ever have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching.
Underspray was intentional
You are correct, but I have noticed other TTIs that have a better shadowing job than mine! My so called shadowing looks bad compared to others I have looked at! I will make a future video showing my experience in this matter! I hope you stay in contact and thank you for watching!
@pewpewswithmr.x is your striker pin holding up?
I have had no issues to this point! Is this an issue people are having or have you had issues?
@pewpewswithmr.x there are several light strike issues and damaged firing pins on YT. hopefully centery arms will make it right. High demand may have resulted in spotty QC.
Yeah I could see that for sure especially after noticing a difference in cerakote quality from one TTI to the next. Hopefully mine is just a cerakote issue and nothing else!
Is it a pretty flat shooting gun? I own a Glock 17 but I’m thinking about buying the TTI. How’s the recoil with the comp compared to the Glock? I’m kinda new to guns
Thankyou! Bought mine maybe 6 months was working fine until I bought some cheaper ammo in bulk will definitely be trying this!
You’re welcome and if you have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
Good shooting. Canik confirmed that the 507, 407, vortex optics does not fit because they only have screws provided that doesn’t fit so you have to buy a separate t10 screw and different length t20 just in case. If your gun wiggles it’s because you need rear studs flushed on there or the screws are not long enough. Too long night cause your gun to malfunction. Shadow system also had that problem the screws had to be of perfect length.
Thank you and thank you for sharing your experience about the screws. It seems to be a common issue people are having. I hope you stay in contact and thank you for watching!
Canik Turkish gun all Turkish gun Tne are Garbace pis craps Junk 👎👎👎👎👎👎
What screws did you use to tighten down the holosun to the slide? because the screws that come with the canik don’t fit the ported holes that line up with the holosun in the middle?
I used the ones I got with the red dot, because they are the right length and taper to fit flush on the red dot. Caniks red dot bolts are not tapered at the head of the bolt so fitment is not right. If you have any other questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
You probably have to get a different length t10 screws. Thought it was just me. They messaged me back today saying that’s the right screw and they swear it fits and they blamed it on holosun and vortex
Ur lieing bro 🤣🤣🤣 that comp does nothing but make that pistol louder
I take it you don’t actually own one? You own a gun with a comp? Or a ported barrel? They both help and you are right they make the gun louder, but the TTI design is better then both my comped shadow system/ custom ported Glock clone build I did.
Cool tip!
No problem and if you ever have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
I called Springfield armory, ordered it and had a 407 on the gun in one week. The XDM elite is my “go to” gun.
The XDM is my favorite 10mm gun out of my SIG & S&W. I want to buy a 1911 10mm in the future, because I like the way they shoot best! I hope you stay in contact and thank you for watching!
So basically there are no problems with the gun, it's just typical 22 dirty issue, good to know, I love mine
Yes in a nutshell you are correct and just about everyone can fix the issues with out having to go to a gun smith! I hope you stay in contact and thank you for watching!
Were you able to torque the screws to 30" lbs?
Bolts where torqued to spec! If you have any other questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
I agree about the slide release pattern, it should be turned upside down but I think the cerakoting thing was on purpose
I’m not impressed with how they did the cerakoting at all, because the shadowing looks like miss cerakote. It’s also not even from one side of the gun to the other. There is more or less so called shadowing in spots and also some groves have no shadowing on the front of the gun on the right side of the slide, but does have it on the other side area opposite of where there is none! I hope you stay in contact and thank you for watching!
Love my Ruger Super Single Six made in the 200 year of American Liberty (1976). I got it new in 1976 for $112 dollars with the mag cylinder. 48 years old and still running strong . Never big on the Rump Riders- to many friends had problems with them . Lite primer strikes , springs breaking and screws falling out. And that sissy safety made it look a toy. The fit and finish left a lot. I have 3 Ruger Wranglers. All Rugers are made in America.😀
My dad has a single six too with the mag cylinder and I agree we have never had any issues. I love Ruger firearms too and for the price point you can’t go wrong! I hope you stay in contact and thank you for watching!
Love to have an old single six. I do have a Ruger Redhawk in 357 that was my grandpa's he bought back in the 80's. The Rough riders are decent I've only had the lite primer strike and this trick works so far
When you grab the comp and wiggle it does your barrel move? Mine does and its a little concerning.
Yes it moves on the slide a little, but the comp doesn’t move at all on the barrel once locked into place. I hope that answers your question? I hope you stay in contact and thank you for watching!
The singer have terrible voice!!!
I just picked up a used TP9SFx. I'm a lefty and the button sticks out so far that I felt the need to swap it. What a pain in the ass!!! It took me an hour to get that damn thing back in. Why the hell didn't they make a channel for the spring to slide in?!? Now that it's done, I'm never ever taking it out again 😂. Just one piece of feedback, get a bore light so the viewers can see better inside the magazine well. I appreciate your efforts though to show how to perform this task even though you are a right handed shooter. I don't think I would be that dedicated for this particular item 😂.
I definitely agree that a channel for the spring would help! I know just use dental floss to hold tight then slide in and cut/remove floss after it’s in! I hope you stay in contact and thank you for watching!
I’m looking for a flat shooting gun witch one of the two would you recommend
My canik rival S is noticeably better, but both are great guns! Im gonna do some upgrades to the TTI to see if I can make it better! I hope you stay in contact and thank you for watching!
I have the rival s and I have the tti, the rival s is almost twice as heavy to achieve similar recoil results. My opinion says tti all day. Also consider the original polymer rival as well, It’s shoots pretty darn flat. Personally I prefer the polymer over the steel frame rival
I love all my Caniks, but I definitely shoot the rival s the flattest and quickest transition for me personally!
Cz p10 competition. I just sent my canik back after 40 rounds
@simpleflipR6 what was wrong with your Canik?
Is this the compact Canik shoe or the rival shoe? Just trying to decide between Canik or freedom smith for my mc9. Thanks
It’s just Canik pro shoe that has every gun listed that it fits but the mc9 lol but it fits it perfectly! I’ve heard good things about the freedom smith, but I’ve never bought one. I personally like the canik flat faced trigger shoe best for me. If you have any other questions don’t hesitate to ask? I hope you stay in contact. I hope you stay in contact and thank you for watching!
Do these pistols actually ship in cardboard boxes? They aren't $300 Taurus 9mm pistols. I realize the box isn't a big deal, but that's pretty cheap.
So when do you need to use the spacer vs the spinning wheel used for the Glock?
Just use spin plate to push rear site out of a Glock. If you change front site on a Glock it’s a tiny bolt. If you have any other questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
@@pewpewswithmr.x ok thanks I was just wondering what the use of that spacer was because there’s not really other videos that show it being used
@AlexLopez-vt4fl it’s for removing a front sight for other guns that are different then glocks. Like my caniks for example that I used in the video.
On yours does the slide fit good to the frame have you noticed any wobble?
Yes there is a little wobble, but from my understanding that is normal with polymer guns. If you have any other questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
The holosun 407 or 507
507c and I have 3 of them. Two red and one green
Look into 507 comp it has a larger window
Great video. Very informative and moved along nicely. Constructive criticism; I would recommend you go to your local college and take a public speaking course to help alleviate your pregnant pauses (umm, umm). That was very distracting for me. Not saying I'm perfect, but having taken college courses and leadership training in the military made a big difference for me. You can slow your thoughts down and speak more deliberately and the listener will not notice. Just my 2 cents. I have a TP9SF and had ftf issues with 115 grain ammunition. Interesting that you had zero issues. I'm still putting some rounds through it to break it in and have ordered a low force recoil spring. Can't bring myself to drop a grand on a Canik though. As they say, to each their own. See you next time.
Thank you for the feedback I greatly appreciate it! I also have had FDF issues With some of my other Caniks and I just ran heavier grain bullets through mine and also locked the slide open for a day to relieve a little pressure of the spring. That fixed my problems with FDF and if you have any other questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
@@pewpewswithmr.x Yes, I saw one of your videos mentioning this. My slide is locked to the rear as I type...lol. Although it's been a little longer than 24 hours. Although I ordered a low force recoil spring, I want the OEM spring to get to a point where there are zero malfunctions.
@BlueBeretFirearms I never bought one and all my Caniks run flawlessly now. Keep me posted if it works for you? Until next time brother
I had my slide locked to the rear for 48 hours. Yesterday, I ran 60 RDS of 124 grain and had 2 failure to cock. Then I fired 30 rds of 115 gr and had numerous failure to return to battery. Today, I just got the low force recoil spring and fired 30 rds of 115 grain with zero malfunctions.
@BlueBeretFirearms that’s definitely one strong spring, but that’s awesome that the new spring does what it’s supposed to do! I’d just keep repeating the same steps you already did if you want to break that other spring in to run 115grain. Until next time and Thanks for letting me know!
In your estimation, will this tool accommodate removing and / or installing rear suppressor height sights for Glock pistols. Reference height clearance.
When I get home later I can measure how much distance from top of tool area to top of slide and see for you
Came to the comments to see if anyone had corrected you cerakote and I see that they got it covered. Might I suggest that you research any firearm you buy or showcase on your platform. That way you will not be giving out misleading information.
It’s a review of my opinion! My thoughts on the bad/ ugly shadowing job would not change if I knew beforehand. My job is to point out things I like or dislike about the gun and the viewer takes it for what it’s worth. I don’t like the a tempt of shadowing they did and I think they could have done a better job. I wouldn’t have used black to do the shadowing, but a darker gold color to create the shadowing affect! I think it would have turned out way cleaner and look better in my opinion.
@pewpewswithmr.x I was pointing out that your statement of it being the company's fault or bad QC, which was incorrect. You can't always have your opinion if it is ugly to you or not.
@terrence946 sounds good and I respect you communicating your thoughts. I still think QC was bad on the shadowing, because some areas of one part of the slide have more of the so called shadowing then the other side of the slide! It’s not symmetrical from one side to the other and that’s why it bugs me. Plus it doesn’t look good at all to me even knowing they did it on purpose. I will most likely get it fixed and have it done a little cleaner to my liking down the road because I do truly love the performance of the gun! Until next time and thanks for commenting!
@@pewpewswithmr.x look forward to seeing what you do with it. You might be the first to change the color scheme of the TTI. Probably would make a good video.
Appreciate you for putting up how to clean it and take it apart, just purchased my first canik ever and first gun ever this past weekend
That’s pretty exciting and if you ever have any questions don’t hesitate to ask? I hope you stay in contact and thank you for watching!
My understanding is that the springs come a little stiff on some of these from the factory and don’t like 115gr sometimes. You could probably alleviate the problem by leaving the slide locked open overnight.
Yes you are correct and I have a video talking about how I fixed mine that way! I have a lot of Caniks and videos on them at my home page.
@@pewpewswithmr.x awesome. I’ll check them out and give you a sub while I’m at it.
Just finished paying mine off and waiting for the background check to clear. Used to only have to wait 3 days but apparently they changed the rules and it could take up to 27 days! Wtf?!
Damn, what country or state you live in? I’m from Minnesota/Wisconsin area and I go home the same day when I buy! If ever have any questions about this gun or others don’t hesitate to ask? I hope you stay in contact and thank you for watching!
@@pewpewswithmr.x I’m in New Mexico. I’m pretty sure I’m on the gray list because every firearm I’ve ever purchased i had to wait for the Brady date. Now there’s a 7 day hold on top of the atf clearing which could take up to 20 days. The gun store told me they’ve never taken that long but i worry because of my particular situation.