In honor of Paul Walker for giving life to Brian O'conner
@astronautajhon659119 күн бұрын
How can i take apart my lionel racing car?
@JimDog7942 ай бұрын
You sure make something that easy look hard.
@3rdeyediecast6442 ай бұрын
Lol this is an old video when I first started I have since evolved. Thanks for watching though. 😘
@JiroProject3 ай бұрын
Do you use regular super glue? Because doesn't that leave white smokey residue?
@3rdeyediecast6442 ай бұрын
No I don’t use superglue. I typically will just remove the sides and the bottom leading the top in tact so I’m able to flip open and close.
@checolector21203 ай бұрын
Nice truck 👍🏻
@3rdeyediecast6443 ай бұрын
Thanks bud!! 🙏🏽🙏🏽🙏🏽🔥🔥🔥
@appsunder-ground25244 ай бұрын
Thx bro
@3rdeyediecast6443 ай бұрын
Thank you for watching!
@theultimatumerad4 ай бұрын
i have the same hot wheels as the video
@3rdeyediecast6443 ай бұрын
Awesome!!!
@ashiqxyz7 ай бұрын
Product link
@rip_faithh7 ай бұрын
Time to prove my parents wrong
@3rdeyediecast6447 ай бұрын
🤣🤣🤣🤣
@andysgaragediecastrestorations7 ай бұрын
Great information 👍
@3rdeyediecast6447 ай бұрын
Thanks man check the link pinned at top for updated video
@ERDEMgame_pubg7 ай бұрын
My mini gt silvia s15 buy❤
@3rdeyediecast6447 ай бұрын
💪🏽🔥🔥🔥
@bobbyjones21127 ай бұрын
Damn, and they spin super good!
@3rdeyediecast6445 ай бұрын
Thanks man 💪🏽
@bobbyjones21127 ай бұрын
Damn, it looks like those tools are using are super efficient. You barely look like you’re squeezing it.
@3rdeyediecast6445 ай бұрын
I have a new video with new method check my channel
@diabetical_levitater8 ай бұрын
I can't find those crimpers, do you have a link?!
@3rdeyediecast6447 ай бұрын
I dont unfortunately, i got those in store at walmart in the craft section
@prodigygamepro16688 ай бұрын
Good job it really helped!
@3rdeyediecast6447 ай бұрын
Awesome!
@cleverkuo-toa6448 ай бұрын
You paint rust beautifully!
@3rdeyediecast6445 ай бұрын
Thank you!!!! 🙏🏽 sorry for the late response im just seeing this
@Daniel-oe2kq8 ай бұрын
Great videoI have a question where did you buy your tools?
@3rdeyediecast6448 ай бұрын
At the time i had got everything at harbor freight
@jamesdostie35569 ай бұрын
OMG!!!!! WHAT A SH*TSHOW!!!!!!
@jamesdostie35569 ай бұрын
dude doesn't have a clue WTF start with a fucki^ng sharp not the ons you stole from the dump,entire vedio is spent making up excuses,i cound have been taking a shi4t DO NOT TAKE ER ADVISE AS YOU FO&Ck everthing YOUR WORKING ON RUN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WASTE YOUR TIME STU^P FU^CK
@itz_yaboii_ryan9 ай бұрын
Thank you so much for this❤ but how do you put it back on after removing??
@3rdeyediecast6448 ай бұрын
I will be making a video for that soon
@thecustomlegoweaponcreator40219 ай бұрын
What size of Brass Rod did you use for the axles?
@user-si6rx7zj9t9 ай бұрын
Wow❤
@3rdeyediecast6447 ай бұрын
🔥🔥🔥
@kermit_698210 ай бұрын
#usescrewforhotwheels 👇
@ericachamley441410 ай бұрын
two kinds of brake clean,one is safe for plastics
@Diecast_Boy9311 ай бұрын
I thought your video was great. The only question I had was how do I know if I have a metal or wood one? I have some hard time opening mine and I had a drill
@3rdeyediecast6445 ай бұрын
Well its either metal base or plastic you will definitely be able to tell
@mrvaluntat11 ай бұрын
😍
@stevenfchannel830 Жыл бұрын
What brand is it? For Brake cleaner?
@3rdeyediecast64411 ай бұрын
I don’t remember but I recommend using a dry erase marker instead. Works great
@db891989 Жыл бұрын
A small carbide ball or carbide drill bit works best and will eat that metal up. If you customize alot it's worth the money and keep it cool with some oil or even just water.
@3rdeyediecast64411 ай бұрын
Definitely! I have since upgraded since this video! 💪🏽💪🏽💪🏽
@wg1926 Жыл бұрын
Sayang kalo yang blisteran diloose
@3rdeyediecast64411 ай бұрын
🔥🔥🔥
@Mistergameoperator11 ай бұрын
Kan bisa di taro lagi kan?
@anykinehobbyguy808 Жыл бұрын
Thank you for this video. Very helpful. Where did you get the brass rods & your crimpers from?
@3rdeyediecast644 Жыл бұрын
Got everything from hobby lobby
@MyLife-cm2bm Жыл бұрын
Bro give buying like😅
@3rdeyediecast644 Жыл бұрын
🔥🔥🔥
@ronalddavidasagra9237 Жыл бұрын
howd you make the color matte?
@3rdeyediecast644 Жыл бұрын
Sanded and matte clear coat
@thewhosellout1967 Жыл бұрын
Make a new video man! I got these new Mandalorian themed hotwheels that I wanna customize. 😅😅
@3rdeyediecast644 Жыл бұрын
The process is the same! This is the latest process i use at the moment. But you are right i do need to do more videos
@tanleethengtan3800 Жыл бұрын
😯😯😯
@kksirgaming Жыл бұрын
Wow an you give me👀🙂
@raprulesdude6520 Жыл бұрын
Bit size 1:54 I agree but only tried once.
@3rdeyediecast6445 ай бұрын
Awesome!!
@xaviersaverela2958 Жыл бұрын
What do you write??
@3rdeyediecast6445 ай бұрын
🤐
@ellyfebriyanti7817 Жыл бұрын
Harga nya berapa bang
@zephyr3871 Жыл бұрын
In México it's around $500MXN
@Crazyreaper898 Жыл бұрын
Where’s the mini one that was inside
@Cultura_hotwheels Жыл бұрын
How will the card look after it drys
@3rdeyediecast644 Жыл бұрын
Perfect, like nothing
@Cultura_hotwheels Жыл бұрын
@@3rdeyediecast644 thank you
@3rdeyediecast644 Жыл бұрын
@@Cultura_hotwheels thanks for watching!
@3rdeyediecast644 Жыл бұрын
Latest Video with Updated tools. kzread.info/dash/bejne/dKiLuJl8pJvQkso.html
@rickyhernandez8988 Жыл бұрын
Where can I get the tools from. Tia
@3rdeyediecast644 Жыл бұрын
I recommend you getting a drill instead of a Dremel any hardware store will do Harbor freight Home Depot. Take a look at my latest video for updated tools
@RiverasHotWheels Жыл бұрын
Fun fact You can use the cheapest drill with a good name brand drill bit and you will enjoy this hobby more. Please don’t use cheap harbor freight drill bits.
@3rdeyediecast644 Жыл бұрын
Lol this video is 4 years old now, i have since updated many things my bro. But i thank you bud….You follow me on IG by the way .. @3rdeye_diecast 💪🏽
@bmosatx3333 ай бұрын
Do you have an updated video? @@3rdeyediecast644
@shanghunter7697 Жыл бұрын
Didn't understand why you cut the axel in half when you could've just cut the end off and repurposed the axel on a different car (we're all different). I do understand they are cheap to replace though. I buy a LOT of my materials at Michaels craft store......super cheap for all your h.w. needs
@3rdeyediecast644 Жыл бұрын
These vids are pretty old i need to update with new ones. But you are right though michaela has a lot of good stuff!
@norahisaac2687 Жыл бұрын
"promosm" 😕
@3rdeyediecast644 Жыл бұрын
??
@mavericknizmo9182 Жыл бұрын
So if I want to remove the whole bubble, will the glue stay with the plastic bubble or the card? I got a Matchbox car I want to get out of the blister, since it can wiggle enough to, eventually, get the roof scratched, but I also want to keep the card intact
@3rdeyediecast644 Жыл бұрын
This video is old and when i first started… 100% acetone is the way to go. Much better than nail polish remover
@gedsontatuzinhodiecast2016 Жыл бұрын
Perfeita miniatura
@3rdeyediecast644 Жыл бұрын
Thank you! 🙏🏽🙏🏽🔥🔥🔥
@brianwalker7771 Жыл бұрын
Power is NOT everything! I have been getting better results with a hand driven drill bit in a hand grip than a drill. As for your tool of choice in the video congratulations getting one that worked. I bought the same one from good old Harbor Freight and it would NOT even power up! The worst part is when I returned it the guy looked surprised that I actually expected it to work.
@3rdeyediecast644 Жыл бұрын
Yeah this video is old now i have since upgraded to a drill works great. Watch my newest video im using it there
Пікірлер
Great tips!👍🏻
In honor of Paul Walker for giving life to Brian O'conner
How can i take apart my lionel racing car?
You sure make something that easy look hard.
Lol this is an old video when I first started I have since evolved. Thanks for watching though. 😘
Do you use regular super glue? Because doesn't that leave white smokey residue?
No I don’t use superglue. I typically will just remove the sides and the bottom leading the top in tact so I’m able to flip open and close.
Nice truck 👍🏻
Thanks bud!! 🙏🏽🙏🏽🙏🏽🔥🔥🔥
Thx bro
Thank you for watching!
i have the same hot wheels as the video
Awesome!!!
Product link
Time to prove my parents wrong
🤣🤣🤣🤣
Great information 👍
Thanks man check the link pinned at top for updated video
My mini gt silvia s15 buy❤
💪🏽🔥🔥🔥
Damn, and they spin super good!
Thanks man 💪🏽
Damn, it looks like those tools are using are super efficient. You barely look like you’re squeezing it.
I have a new video with new method check my channel
I can't find those crimpers, do you have a link?!
I dont unfortunately, i got those in store at walmart in the craft section
Good job it really helped!
Awesome!
You paint rust beautifully!
Thank you!!!! 🙏🏽 sorry for the late response im just seeing this
Great videoI have a question where did you buy your tools?
At the time i had got everything at harbor freight
OMG!!!!! WHAT A SH*TSHOW!!!!!!
dude doesn't have a clue WTF start with a fucki^ng sharp not the ons you stole from the dump,entire vedio is spent making up excuses,i cound have been taking a shi4t DO NOT TAKE ER ADVISE AS YOU FO&Ck everthing YOUR WORKING ON RUN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WASTE YOUR TIME STU^P FU^CK
Thank you so much for this❤ but how do you put it back on after removing??
I will be making a video for that soon
What size of Brass Rod did you use for the axles?
Wow❤
🔥🔥🔥
#usescrewforhotwheels 👇
two kinds of brake clean,one is safe for plastics
I thought your video was great. The only question I had was how do I know if I have a metal or wood one? I have some hard time opening mine and I had a drill
Well its either metal base or plastic you will definitely be able to tell
😍
What brand is it? For Brake cleaner?
I don’t remember but I recommend using a dry erase marker instead. Works great
A small carbide ball or carbide drill bit works best and will eat that metal up. If you customize alot it's worth the money and keep it cool with some oil or even just water.
Definitely! I have since upgraded since this video! 💪🏽💪🏽💪🏽
Sayang kalo yang blisteran diloose
🔥🔥🔥
Kan bisa di taro lagi kan?
Thank you for this video. Very helpful. Where did you get the brass rods & your crimpers from?
Got everything from hobby lobby
Bro give buying like😅
🔥🔥🔥
howd you make the color matte?
Sanded and matte clear coat
Make a new video man! I got these new Mandalorian themed hotwheels that I wanna customize. 😅😅
The process is the same! This is the latest process i use at the moment. But you are right i do need to do more videos
😯😯😯
Wow an you give me👀🙂
Bit size 1:54 I agree but only tried once.
Awesome!!
What do you write??
🤐
Harga nya berapa bang
In México it's around $500MXN
Where’s the mini one that was inside
How will the card look after it drys
Perfect, like nothing
@@3rdeyediecast644 thank you
@@Cultura_hotwheels thanks for watching!
Latest Video with Updated tools. kzread.info/dash/bejne/dKiLuJl8pJvQkso.html
Where can I get the tools from. Tia
I recommend you getting a drill instead of a Dremel any hardware store will do Harbor freight Home Depot. Take a look at my latest video for updated tools
Fun fact You can use the cheapest drill with a good name brand drill bit and you will enjoy this hobby more. Please don’t use cheap harbor freight drill bits.
Lol this video is 4 years old now, i have since updated many things my bro. But i thank you bud….You follow me on IG by the way .. @3rdeye_diecast 💪🏽
Do you have an updated video? @@3rdeyediecast644
Didn't understand why you cut the axel in half when you could've just cut the end off and repurposed the axel on a different car (we're all different). I do understand they are cheap to replace though. I buy a LOT of my materials at Michaels craft store......super cheap for all your h.w. needs
These vids are pretty old i need to update with new ones. But you are right though michaela has a lot of good stuff!
"promosm" 😕
??
So if I want to remove the whole bubble, will the glue stay with the plastic bubble or the card? I got a Matchbox car I want to get out of the blister, since it can wiggle enough to, eventually, get the roof scratched, but I also want to keep the card intact
This video is old and when i first started… 100% acetone is the way to go. Much better than nail polish remover
Perfeita miniatura
Thank you! 🙏🏽🙏🏽🔥🔥🔥
Power is NOT everything! I have been getting better results with a hand driven drill bit in a hand grip than a drill. As for your tool of choice in the video congratulations getting one that worked. I bought the same one from good old Harbor Freight and it would NOT even power up! The worst part is when I returned it the guy looked surprised that I actually expected it to work.
Yeah this video is old now i have since upgraded to a drill works great. Watch my newest video im using it there
That's nice work 👏
Thank you man! 🙏🏽💪🏽🔥🔥🔥