@@LivingonApex-cp3sx 225 width 540 threadwear tires, 4500lb car
@colin55594Ай бұрын
Got me there 😂
@mistertech332Ай бұрын
german monster 🇩🇪
@allisonkooАй бұрын
Hi, what app is this? is it Racechrono? and how how did you mount the camera? i have a c5
@CFGRacingАй бұрын
Yes it's racechrono on the phone, just use one of your old phones. Get a 10Hz external gps for it, the phone internal one is not accurate enough. As for the camera, I have a gopro upside down on the roof.
@jon350Ай бұрын
Nice vid... Have you done much work to the Z?
@CFGRacingАй бұрын
Engine died after 1 session when I first bought it. just rebuilt over winter. Check some of the other vids.
@PondGuardianRacing2 ай бұрын
What kit is this???
@CFGRacingАй бұрын
not a kit, i built the setup byself using jenvey itb's
@PondGuardianRacingАй бұрын
@@CFGRacing nice man! It looks really clean.
@tydortch306319 сағат бұрын
@@CFGRacingwhat intake manifold?
@yipchitaywonga2 ай бұрын
What a race, well done!
@CFGRacing2 ай бұрын
Thank you, it was a hard race. But very satisfying end.
@coreyarmastus61892 ай бұрын
Mine does this too
@CFGRacing2 ай бұрын
They fixed it pretty easily when I brought it in.
@ethanweaver13 ай бұрын
What ITB setup is this?
@CFGRacing3 ай бұрын
No itb on this one. My other car is itb.
@gakidomo95613 ай бұрын
I tried this before on a Yaris manual, I only listen to the sound and its fun. You should try not to look at the Rev but try to listen to the car sound, the feeling off the pedals and you'll love it!
@CFGRacing3 ай бұрын
don't look at the revs at all when on track all sound
@TheTERIO143 ай бұрын
Im curious about your engine management, what system are you using and did you get it professionally tuned?
@CFGRacing3 ай бұрын
It’s in Haltech ps1000 I did all the sections that could be street tuned Then get a pro to clean up the dyno pull sections
@danyu52083 ай бұрын
very spacious trunk
@HokKan3 ай бұрын
Wow it is so fast
@CFGRacing3 ай бұрын
could be faster if i can slow properly
@HokKan3 ай бұрын
@@CFGRacing what did you do with the engine to make it so much faster?
@CFGRacing3 ай бұрын
@@HokKan rebuilt lmao
@northamericadrivingacademy4 ай бұрын
Hello mate May i feature your driving video with credit back to you? Thanks and can you explain what happen? Stay safe!!
@CFGRacing4 ай бұрын
Please link my channel for credit, feel free to use it. No comment as I have no idea what that guy was trying to achieve.
@northamericadrivingacademy4 ай бұрын
Thank you@@CFGRacing
@driveinstructordrivingscho82334 ай бұрын
Hello CFG Racing,,,can I use this clip in my compilation? Any comment what happened? Thanks
@CFGRacing4 ай бұрын
Please link my channel for credit, feel free to use it. No comment as I have no idea what that guy was trying to achieve.
@sarthakverma90244 ай бұрын
do you have syncromesh gears or dog gears?
@CFGRacing4 ай бұрын
It was a normal honda transmission with some good mileages on it.
@sachinniyarepola16405 ай бұрын
Are thos rental cars
@CFGRacing5 ай бұрын
Most are not, some are available for rent.
@24GardLake6 ай бұрын
I gotta dig up some turbos... shame mine's just a garage queen...
@rileygally29677 ай бұрын
BC registered 🤤
@jaidenkiersten70807 ай бұрын
P r o m o S M
@BboyWhiteNinja7 ай бұрын
Dreams 🥰
@dragbeast8 ай бұрын
Very cool videos man! I know it's 2 years old but keep going 👍🏽👍🏽
@CFGRacing8 ай бұрын
Watch video of my new car. The C6Z.
@dragbeast8 ай бұрын
Cool video, good driving..I can see that you can push it more :) Do it?! Its a rotary, it wants you to push it more. S4..Like mine, very very reliable 😎👌🏽
@CFGRacing8 ай бұрын
Engine felt off balanced, starts vibrating around 6.5k that's why the early shifts. Front rotor housing has a hair line crack spilling oil out when ran hard, that was 2021. Car is sitting for now until I find time to rebuild the engine.
@dragbeast8 ай бұрын
@@CFGRacing I see, good luck on that. I just saw your recent videos. I miss the braps man haha are you gonna port the engine when you rebuild it (if ever). 6 ports porting ain't the same as 4
@YELLOW08Z068 ай бұрын
Congrats
@CFGRacing8 ай бұрын
Came a loooooong way to get here. Check instagram, I posted about the engine build process.
@BboyWhiteNinja8 ай бұрын
Lmao
@BboyWhiteNinja8 ай бұрын
Straight 🔥
@CFGRacing8 ай бұрын
Cheers, I think I could have done better by holding him to the right more before turning in. But this was my first real pass leading up to first race win. Later on in the season I do much better than this.
@HokKan8 ай бұрын
just an inchident
@sarthakverma90249 ай бұрын
how is it possible 😮🙌
@CFGRacing9 ай бұрын
mechanical understanding of how the engine/transmission work and then practice practice practice
@o0reig0o9 ай бұрын
What a nice start! Loved the video :)
@CFGRacing9 ай бұрын
Glad you liked it!
@nessusing10 ай бұрын
Bring him to the track!😆
@CFGRacing10 ай бұрын
Won't let me touch him, so that might be tough to do. LOL
@HasTheTimeGone10 ай бұрын
this mf is going crazy on that fucking walnut this is an amazing video
@CFGRacing10 ай бұрын
I endure those little bits peppering my cars for about 2 months each year. There's absolutely no point in washing until these guys eat all the walnuts on the tree.
@HasTheTimeGone10 ай бұрын
@@CFGRacing darn dude they seem like a pain
@KathrynsWorldWildfireTracking10 ай бұрын
_It's a Piney!_ What we call pine squirrels. :)
@ItsWinTime10 ай бұрын
That was some excellent driving by yourself and Rod towards the end. Great sportsmanship, respect, and skill coming out of corner 6!
@CFGRacing10 ай бұрын
Glad you enjoyed it
@dylanfortune139111 ай бұрын
And he never put it together again..hehe
@CFGRacing11 ай бұрын
Put together just fine when the spring going in is shorter.
@saml.s2907 Жыл бұрын
Cold start?
@CFGRacing Жыл бұрын
Yup cold start, I start up my rotary's every month or so to warm them up to temp.
@nessusing Жыл бұрын
awesome race! congrats! and also thanks for better video quality😀
@CFGRacing Жыл бұрын
Glad you enjoyed that one, check out the CACC 3 videos from last week's race event.
@nessusing Жыл бұрын
@@CFGRacing watched them all!
@clintlogue4344 Жыл бұрын
You were driving the wheels off that thing!
@johnscott8590 Жыл бұрын
No redlining?
@CFGRacing Жыл бұрын
counterweight for light flywheel engine is out of balance, so it shakes rather violently over 7k it's an attribute of racing with a lack of funding
@gearhead3666 ай бұрын
@@CFGRacing I thought rotaries were naturally balanced.
@CFGRacing6 ай бұрын
@@gearhead366 balance does not come naturally on anything. rotary is naturally "more" balanced to their piston counter parts, that's where it ends
@Noeffortls7 Жыл бұрын
Any plans to make and sell them or do made to orders?
@CFGRacing Жыл бұрын
can do make to orders
@Noeffortls7 Жыл бұрын
@@CFGRacingwhats the best way to contact you regarding ordering one?
@Itscastlebravo Жыл бұрын
How many muffler this thing have ?
@CFGRacing Жыл бұрын
2 at the time of this video, but both MF mufflers. since then I replaced the 2 mufflers with RB ones. And added a canister style MF horizontal below the rear bumper. Super quiet now.
@Itscastlebravo Жыл бұрын
@@CFGRacing can’t imagine what a full straight pipe with no muffler would have sound like lol
@hossemadian7127 Жыл бұрын
I'd also add, yes it can track in a sense that it won't tip over, having a low COM being an electric SUV.
@davidaix5771 Жыл бұрын
Yeah till that engine eats those turbos
@buzzrace90959 ай бұрын
It’s a v10 N/A engine. it doesn’t have turbos…
@davidaix57719 ай бұрын
@buzzrace9095 🤣🤣🤣 yeah it dosint but it's still a POS those where the worst engines in there
@buzzrace90959 ай бұрын
Yeah you don’t know what your talking about my guy but okay
@davidaix57719 ай бұрын
@@buzzrace9095kzread.info/dash/bejne/ZIik2a2Ndb29nco.htmlsi=LodBo_kzFDr06jAa this is the worst engine that you could get in this it's common knowledge that it's a total piece of crap you don't even have to look hard
@user_473139 ай бұрын
Neither of you do. It’s a twin-turbo diesel V10 and it lasted my family a solid 200k miles without any issues.
@isamcdivitt2867 Жыл бұрын
Great talent, keep up the good work. Don't miss out - Promo*SM!
@Fishsticks187 Жыл бұрын
Are you running the stock transmission?
@CFGRacing Жыл бұрын
yes that was a stock b18c1 transmission
@xmangle5382 Жыл бұрын
it sucks that this track has so many long straights, it's almost frustrating seeing you catching up to them on corners but then right after their car's power completely carries them on the straight
@CFGRacing Жыл бұрын
That's why I bought a "faster" car in 2022. Check out my c6z06 chasing a lambo down video.
@xmangle5382 Жыл бұрын
@@CFGRacing wouldnt a turbo on that 13B help closing the gab between the car’s power tho?
@CFGRacing Жыл бұрын
@@xmangle5382 i popped 4 motors back in 2019 when i bought this car turbo'd
@xmangle5382 Жыл бұрын
@@CFGRacing jesus crist, didnt know racing was that bad when it comes to engine blows
@CFGRacing Жыл бұрын
@@xmangle5382 once you are up to speed, demand from your equipment is very high
@kingly2074 Жыл бұрын
Hi where to download this mod
@e.r.6147 Жыл бұрын
Whats ur camera setup? Maybe u could doa video on that cause I like it and wanr to copy it 😂 👍🏼 👍🏼
@CFGRacing Жыл бұрын
simple 3 gopro hero 4 setup it's all in the editing
@e.r.6147 Жыл бұрын
@@CFGRacing what software do u use to edit it and sync thr timelines? Cool rx7 btw whats the year of it?
@smokiethebear3334 Жыл бұрын
You weren't lieing.
@CFGRacing Жыл бұрын
yea lol, cursing around town in 500hp is boring af
@smokiethebear3334 Жыл бұрын
@@CFGRacing and probably 600ft lbs of tq. My lbz is averaging 700hp and 1100ft lbs so ya 500hp is boring.
@bluesky-ud9wg Жыл бұрын
Guess you're heater doesn't work
@CFGRacing Жыл бұрын
it works once fully warmed up, just a cold day over all lol
@anyau Жыл бұрын
do you have a mod list?
@CFGRacing Жыл бұрын
It's a really old build from over 15 years ago. I will just list them out as much as I can remember. Stripped out interior TEIN HA Coilovers Energy suspension PU bushing all over Rear subframe camber link Ebay header into RB Y pipe and dual Rev II mufflers Stock port motor, Jenvey ITB with RB upper Haltech PS1000 stand alone ECU Stock brakes with Stoptech rotors and Hawk DTC60 17x8 RPF1 235/45/17 squared setup Large ebay AL radiator that's all i could think of, car was a very basic setup
Пікірлер
Hahahahaha the mustang is crying every turn
@@LivingonApex-cp3sx 225 width 540 threadwear tires, 4500lb car
Got me there 😂
german monster 🇩🇪
Hi, what app is this? is it Racechrono? and how how did you mount the camera? i have a c5
Yes it's racechrono on the phone, just use one of your old phones. Get a 10Hz external gps for it, the phone internal one is not accurate enough. As for the camera, I have a gopro upside down on the roof.
Nice vid... Have you done much work to the Z?
Engine died after 1 session when I first bought it. just rebuilt over winter. Check some of the other vids.
What kit is this???
not a kit, i built the setup byself using jenvey itb's
@@CFGRacing nice man! It looks really clean.
@@CFGRacingwhat intake manifold?
What a race, well done!
Thank you, it was a hard race. But very satisfying end.
Mine does this too
They fixed it pretty easily when I brought it in.
What ITB setup is this?
No itb on this one. My other car is itb.
I tried this before on a Yaris manual, I only listen to the sound and its fun. You should try not to look at the Rev but try to listen to the car sound, the feeling off the pedals and you'll love it!
don't look at the revs at all when on track all sound
Im curious about your engine management, what system are you using and did you get it professionally tuned?
It’s in Haltech ps1000 I did all the sections that could be street tuned Then get a pro to clean up the dyno pull sections
very spacious trunk
Wow it is so fast
could be faster if i can slow properly
@@CFGRacing what did you do with the engine to make it so much faster?
@@HokKan rebuilt lmao
Hello mate May i feature your driving video with credit back to you? Thanks and can you explain what happen? Stay safe!!
Please link my channel for credit, feel free to use it. No comment as I have no idea what that guy was trying to achieve.
Thank you@@CFGRacing
Hello CFG Racing,,,can I use this clip in my compilation? Any comment what happened? Thanks
Please link my channel for credit, feel free to use it. No comment as I have no idea what that guy was trying to achieve.
do you have syncromesh gears or dog gears?
It was a normal honda transmission with some good mileages on it.
Are thos rental cars
Most are not, some are available for rent.
I gotta dig up some turbos... shame mine's just a garage queen...
BC registered 🤤
P r o m o S M
Dreams 🥰
Very cool videos man! I know it's 2 years old but keep going 👍🏽👍🏽
Watch video of my new car. The C6Z.
Cool video, good driving..I can see that you can push it more :) Do it?! Its a rotary, it wants you to push it more. S4..Like mine, very very reliable 😎👌🏽
Engine felt off balanced, starts vibrating around 6.5k that's why the early shifts. Front rotor housing has a hair line crack spilling oil out when ran hard, that was 2021. Car is sitting for now until I find time to rebuild the engine.
@@CFGRacing I see, good luck on that. I just saw your recent videos. I miss the braps man haha are you gonna port the engine when you rebuild it (if ever). 6 ports porting ain't the same as 4
Congrats
Came a loooooong way to get here. Check instagram, I posted about the engine build process.
Lmao
Straight 🔥
Cheers, I think I could have done better by holding him to the right more before turning in. But this was my first real pass leading up to first race win. Later on in the season I do much better than this.
just an inchident
how is it possible 😮🙌
mechanical understanding of how the engine/transmission work and then practice practice practice
What a nice start! Loved the video :)
Glad you liked it!
Bring him to the track!😆
Won't let me touch him, so that might be tough to do. LOL
this mf is going crazy on that fucking walnut this is an amazing video
I endure those little bits peppering my cars for about 2 months each year. There's absolutely no point in washing until these guys eat all the walnuts on the tree.
@@CFGRacing darn dude they seem like a pain
_It's a Piney!_ What we call pine squirrels. :)
That was some excellent driving by yourself and Rod towards the end. Great sportsmanship, respect, and skill coming out of corner 6!
Glad you enjoyed it
And he never put it together again..hehe
Put together just fine when the spring going in is shorter.
Cold start?
Yup cold start, I start up my rotary's every month or so to warm them up to temp.
awesome race! congrats! and also thanks for better video quality😀
Glad you enjoyed that one, check out the CACC 3 videos from last week's race event.
@@CFGRacing watched them all!
You were driving the wheels off that thing!
No redlining?
counterweight for light flywheel engine is out of balance, so it shakes rather violently over 7k it's an attribute of racing with a lack of funding
@@CFGRacing I thought rotaries were naturally balanced.
@@gearhead366 balance does not come naturally on anything. rotary is naturally "more" balanced to their piston counter parts, that's where it ends
Any plans to make and sell them or do made to orders?
can do make to orders
@@CFGRacingwhats the best way to contact you regarding ordering one?
How many muffler this thing have ?
2 at the time of this video, but both MF mufflers. since then I replaced the 2 mufflers with RB ones. And added a canister style MF horizontal below the rear bumper. Super quiet now.
@@CFGRacing can’t imagine what a full straight pipe with no muffler would have sound like lol
I'd also add, yes it can track in a sense that it won't tip over, having a low COM being an electric SUV.
Yeah till that engine eats those turbos
It’s a v10 N/A engine. it doesn’t have turbos…
@buzzrace9095 🤣🤣🤣 yeah it dosint but it's still a POS those where the worst engines in there
Yeah you don’t know what your talking about my guy but okay
@@buzzrace9095kzread.info/dash/bejne/ZIik2a2Ndb29nco.htmlsi=LodBo_kzFDr06jAa this is the worst engine that you could get in this it's common knowledge that it's a total piece of crap you don't even have to look hard
Neither of you do. It’s a twin-turbo diesel V10 and it lasted my family a solid 200k miles without any issues.
Great talent, keep up the good work. Don't miss out - Promo*SM!
Are you running the stock transmission?
yes that was a stock b18c1 transmission
it sucks that this track has so many long straights, it's almost frustrating seeing you catching up to them on corners but then right after their car's power completely carries them on the straight
That's why I bought a "faster" car in 2022. Check out my c6z06 chasing a lambo down video.
@@CFGRacing wouldnt a turbo on that 13B help closing the gab between the car’s power tho?
@@xmangle5382 i popped 4 motors back in 2019 when i bought this car turbo'd
@@CFGRacing jesus crist, didnt know racing was that bad when it comes to engine blows
@@xmangle5382 once you are up to speed, demand from your equipment is very high
Hi where to download this mod
Whats ur camera setup? Maybe u could doa video on that cause I like it and wanr to copy it 😂 👍🏼 👍🏼
simple 3 gopro hero 4 setup it's all in the editing
@@CFGRacing what software do u use to edit it and sync thr timelines? Cool rx7 btw whats the year of it?
You weren't lieing.
yea lol, cursing around town in 500hp is boring af
@@CFGRacing and probably 600ft lbs of tq. My lbz is averaging 700hp and 1100ft lbs so ya 500hp is boring.
Guess you're heater doesn't work
it works once fully warmed up, just a cold day over all lol
do you have a mod list?
It's a really old build from over 15 years ago. I will just list them out as much as I can remember. Stripped out interior TEIN HA Coilovers Energy suspension PU bushing all over Rear subframe camber link Ebay header into RB Y pipe and dual Rev II mufflers Stock port motor, Jenvey ITB with RB upper Haltech PS1000 stand alone ECU Stock brakes with Stoptech rotors and Hawk DTC60 17x8 RPF1 235/45/17 squared setup Large ebay AL radiator that's all i could think of, car was a very basic setup