What year is your 111? I am looking for a key switch for mine which is an 1984 C111J model. If you don't have one, perhaps you know where I can get one. I do not have a part number unfortunately.
@mikestarcher9 сағат бұрын
@@Beaconbrook should be able to get one off ebay. I'm pretty sure mine is a 1980
@Beaconbrook6 сағат бұрын
@@mikestarcherI did that already and received the incorrect part. So I've had to send the part back. Unfortunately I do not have a part number to go by. I only have the model and serial number of my machine. If those tab letters don't match correctly, I cause more damage with it being incorrect. I have a 6 tab key switch. The new one that showed up from ebay, the tab letters definitely did not match. Any other suggestions?
@mikestarcher6 сағат бұрын
@@Beaconbrook use deeres website to find part number
@JohnDeere_112Күн бұрын
You have a lot of tractors! I do not have any of those 3 sadly. Awesome video! Are you doing a video on restoring the patio or 210?
@mikestarcherКүн бұрын
@JohnDeere_112 there is already two videos up on the 212 restoration. There will be at least two more to come. And I am doing a video on the 140 patio restore also
@DanLamey-qk7seКүн бұрын
hi mike i got ur answer can you give me any psrts yards by you thanks
@mikestarcher5 сағат бұрын
i don't really have any local, i would try almost heaven mower salvage.
@DanLamey-qk7seКүн бұрын
hi mike i am looking for a front axle for a 116 jd lawn tractor
@mikestarcherКүн бұрын
@DanLamey-qk7se try ebay or local parts yards
@scottclarke2293Күн бұрын
Details on the patio paint?
@mikestarcherКүн бұрын
@@scottclarke2293 wym?
@Creddy37373 күн бұрын
When I engage my blades my 317 stops. What could be the problem ? I am in Logan Ohio.
@mikestarcher3 күн бұрын
@Creddy3737 it stops running?
@Gage-ed2hp5 күн бұрын
Hi i have a question the 140 im looking at only has one brake pedal and is a 72 he thinks is only having one pedal normal or is it aftermarket
@mikestarcher5 күн бұрын
@@Gage-ed2hp must be the other one was taken off
@Gage-ed2hp5 күн бұрын
@@mikestarcher ok thanks
@Waterwater7436 күн бұрын
Informative!!!
@richardharris20617 күн бұрын
You need to pressure washer soon
@olliesmowermart1110 күн бұрын
Hey. Can you make a video on adjusting the variable speed on a John Deere 110 with one clutch and brake pedal?
@mikestarcher10 күн бұрын
@@olliesmowermart11 okay I'll try to get to it
@80cheyenneblazer11 күн бұрын
Hey have you tried a new coil and spark plug, and leave your air cover off when trying to start.oh and try carb cleaner or starting fluid.
@keeseywelding13 күн бұрын
We had an 812 for a long time good units
@Red-head-triple115 күн бұрын
Nice collection
@mikestarcher14 күн бұрын
@@Red-head-triple1 thanks
@robertsmith981015 күн бұрын
bread and butter chisel ploughing
@Jerry-jd40016 күн бұрын
Looks great can you switch form chisel blades to caltavater blades I really like that might have to make one thank great job 👍👍👍
@joehenry193416 күн бұрын
There's an easy trick you know
@urbanitesgarage329916 күн бұрын
Looks really well built
@bobbyoakley120916 күн бұрын
yes
@jimpalazzolo601316 күн бұрын
Yes, good stuff Mike!!👍
@artszabo101516 күн бұрын
Great video Mike, that was impressive Art from Ohio.
@ThatMowerMan17 күн бұрын
Missed the live.
@olliesmowermart1117 күн бұрын
Thank you. That was perfect
@JohnDeere_11217 күн бұрын
My 112 cable runs along the motor
@mikestarcher17 күн бұрын
@@JohnDeere_112 what year is it
@JohnDeere_11217 күн бұрын
@@mikestarcher 1967 round fender
@mikestarcher17 күн бұрын
@@JohnDeere_112 ya, completely different tractor
@ThatMowerMan17 күн бұрын
You should do the 140 throttle and choke cables.
@JohnMe-uv4hm18 күн бұрын
You’ll have to let the clutch out, fan won’t pull it…
@olliesmowermart1118 күн бұрын
Hey Mike. Great fix again. Could you possibly make a quick video on the throttle cable position at the engine for a 112?
@mikestarcher18 күн бұрын
@@olliesmowermart11 are you talking the way it's run or how to adjust it?
@olliesmowermart1117 күн бұрын
@@mikestarcher I don’t know where the throttle cable mounts
@mikestarcher17 күн бұрын
@@olliesmowermart11 making a short now it'll be up soon
@user-ww1oe8um6i18 күн бұрын
Yes please
@user-ww1oe8um6i18 күн бұрын
Beautiful creatures in there natural habitat
@Swfmco.18 күн бұрын
Do you think you’re gonna sell any of them? or your implements cause if you were, I would be interested in the estate rake or plow and the 400 or the hydraulic John Deeres
@mikestarcher18 күн бұрын
@@Swfmco. no, only attachments for sale are mower decks and a brinely cultivator
@user-ww1oe8um6i18 күн бұрын
This was one of the most relaxing videos I ever watched I have an old 30” 10hp Murray but it it is kinda just wasted because I barely have enough grass for a push mower so thanks for this video
@urbanitesgarage329918 күн бұрын
great work
@Zach-ju5vi18 күн бұрын
Cool 😂
@gabrielhankins92519 күн бұрын
I dont refer to things as units often but this
@justina262720 күн бұрын
when was the last time you checked your valves?
@LewisMowersandBoats20 күн бұрын
Very cool brother 😎
@remiprovencher20 күн бұрын
Not sure to inderstand the oil you use, 5w30 or 10w30 ??
@mikestarcher20 күн бұрын
@@remiprovencher I think it was 10 I'll have to check
@MAl-xz7lc20 күн бұрын
YES SIR THE WHOLE FIELD IN 15 MIN☝️👀
@raymondfilyau750020 күн бұрын
It's terrifying yet so friggin awesome at the same time. 😂
@MichaelMiller-vf3wn21 күн бұрын
Fuck that diesel let's put a gaser on it run that cam baby
@Red-head-triple116 күн бұрын
It has a gas engine in it
@michaelvega682721 күн бұрын
Awesome
@imskjrpops638921 күн бұрын
Takes him 5/min to trench a half mile 2’ deep trench.. You’re not paying for how fast he does his job, you’re paying for his expertise..🫡🫵🏽🤣😂
@boostedstinger21 күн бұрын
Is this West Salem Illinois?
@myelzdavis70221 күн бұрын
Yes
@boostedstinger21 күн бұрын
@@myelzdavis702 sweet saw the water tower, spent many years in that area lol.
@chadstellwagen346021 күн бұрын
That could be the most redneck think have ever seen. 😂
Пікірлер
What year is your 111? I am looking for a key switch for mine which is an 1984 C111J model. If you don't have one, perhaps you know where I can get one. I do not have a part number unfortunately.
@@Beaconbrook should be able to get one off ebay. I'm pretty sure mine is a 1980
@@mikestarcherI did that already and received the incorrect part. So I've had to send the part back. Unfortunately I do not have a part number to go by. I only have the model and serial number of my machine. If those tab letters don't match correctly, I cause more damage with it being incorrect. I have a 6 tab key switch. The new one that showed up from ebay, the tab letters definitely did not match. Any other suggestions?
@@Beaconbrook use deeres website to find part number
You have a lot of tractors! I do not have any of those 3 sadly. Awesome video! Are you doing a video on restoring the patio or 210?
@JohnDeere_112 there is already two videos up on the 212 restoration. There will be at least two more to come. And I am doing a video on the 140 patio restore also
hi mike i got ur answer can you give me any psrts yards by you thanks
i don't really have any local, i would try almost heaven mower salvage.
hi mike i am looking for a front axle for a 116 jd lawn tractor
@DanLamey-qk7se try ebay or local parts yards
Details on the patio paint?
@@scottclarke2293 wym?
When I engage my blades my 317 stops. What could be the problem ? I am in Logan Ohio.
@Creddy3737 it stops running?
Hi i have a question the 140 im looking at only has one brake pedal and is a 72 he thinks is only having one pedal normal or is it aftermarket
@@Gage-ed2hp must be the other one was taken off
@@mikestarcher ok thanks
Informative!!!
You need to pressure washer soon
Hey. Can you make a video on adjusting the variable speed on a John Deere 110 with one clutch and brake pedal?
@@olliesmowermart11 okay I'll try to get to it
Hey have you tried a new coil and spark plug, and leave your air cover off when trying to start.oh and try carb cleaner or starting fluid.
We had an 812 for a long time good units
Nice collection
@@Red-head-triple1 thanks
bread and butter chisel ploughing
Looks great can you switch form chisel blades to caltavater blades I really like that might have to make one thank great job 👍👍👍
There's an easy trick you know
Looks really well built
yes
Yes, good stuff Mike!!👍
Great video Mike, that was impressive Art from Ohio.
Missed the live.
Thank you. That was perfect
My 112 cable runs along the motor
@@JohnDeere_112 what year is it
@@mikestarcher 1967 round fender
@@JohnDeere_112 ya, completely different tractor
You should do the 140 throttle and choke cables.
You’ll have to let the clutch out, fan won’t pull it…
Hey Mike. Great fix again. Could you possibly make a quick video on the throttle cable position at the engine for a 112?
@@olliesmowermart11 are you talking the way it's run or how to adjust it?
@@mikestarcher I don’t know where the throttle cable mounts
@@olliesmowermart11 making a short now it'll be up soon
Yes please
Beautiful creatures in there natural habitat
Do you think you’re gonna sell any of them? or your implements cause if you were, I would be interested in the estate rake or plow and the 400 or the hydraulic John Deeres
@@Swfmco. no, only attachments for sale are mower decks and a brinely cultivator
This was one of the most relaxing videos I ever watched I have an old 30” 10hp Murray but it it is kinda just wasted because I barely have enough grass for a push mower so thanks for this video
great work
Cool 😂
I dont refer to things as units often but this
when was the last time you checked your valves?
Very cool brother 😎
Not sure to inderstand the oil you use, 5w30 or 10w30 ??
@@remiprovencher I think it was 10 I'll have to check
YES SIR THE WHOLE FIELD IN 15 MIN☝️👀
It's terrifying yet so friggin awesome at the same time. 😂
Fuck that diesel let's put a gaser on it run that cam baby
It has a gas engine in it
Awesome
Takes him 5/min to trench a half mile 2’ deep trench.. You’re not paying for how fast he does his job, you’re paying for his expertise..🫡🫵🏽🤣😂
Is this West Salem Illinois?
Yes
@@myelzdavis702 sweet saw the water tower, spent many years in that area lol.
That could be the most redneck think have ever seen. 😂
🇺🇸
Now lets see it dig a trench
@@lefthandcigg4253 my thoughts exactly
That is badass
Seems normal😂
ditch witch trencher commercial add
What the hell🤣🤣🤣🤣
Awesome!