No, definitely wouldn’t take it out into any large bodies of water. I’ve had a few big boats go by and wouldn’t want any bigger waves
@treylyde9995 күн бұрын
Proud
@dimm-up5qo6 күн бұрын
I want a under-water pov and how fast does that go
@GavinRemme5 күн бұрын
About 4 miles per hour! Doesn’t sound fast but for a small boat it’s not bad
@ryanpierce12476 күн бұрын
Isn't the point of kayaking to paddle?
@GavinRemme6 күн бұрын
but i didn’t wanna
@barenakedembedded7 күн бұрын
Can’t wait to see the full build! Any ideas on how to build a rudder system like that for an inflatable kayak? Lol
@bronzekilla7 күн бұрын
I feel like kayaks arent supposed to have a motor!
@GavinRemme7 күн бұрын
It’s much more fun with one 🤓
@SouvlakiSpooner7 күн бұрын
As someone who loves to kayak but has lower back issues, I can say some people need motors on their kayaks. Building this would be great because I’ve been thinking about how to put a motor on my current kayak as opposed to buying a new motorized one.
@user-hy7kq8gw2g8 күн бұрын
Great job! surprisingly fast
@user-mh1ko7sp1v8 күн бұрын
Can you share to me how did you build it sir?
@GavinRemme8 күн бұрын
I’ll have a full video posted on my channel soon!
@sisanamapula60938 күн бұрын
My dad running s soon as i pop out:
@user-xl5kt4dg6v11 күн бұрын
try to cooling cpu laptop we the mxm gpu cooler
@EnglertRacing9615 күн бұрын
If it has suspension its a car, not a kart.
@user-vj2nq1xm1h25 күн бұрын
Try a new thermostat and rad flush or waterweter and don't buy tecnacoilovers
@user-vj2nq1xm1h25 күн бұрын
Very nice in mint great buy😅
@shooter7aАй бұрын
Adjustability in suspension is super super important, as you will never get it just right on paper. For example, go online and look at the Technical Manual for the Tatuus T318. This is a top level race car, used for FIA International Formula 3. Go to Rear Suspension Geometry 5.6.2.1.2, and look at all the different combinations that are designed into the pickup points on the transmission housing. 28 different combinations of pick up points that change the way the rear suspension works..! You should design the space frame to utilize a rigid steel interface plates. Different interface plates can then be used to change your pick up points. These can also be precision machined to make up for fab tolerance issues in the machine frame, so that your suspension pick ups are precise to machining tolerances.
@prezeskodaty4637Ай бұрын
1400 megahertz 2000 megahertz processors on all cores perform best
@brandonchretien5995Ай бұрын
What kinda shocks.can you use?
@bacco0447Ай бұрын
god i'd love to build one
@bacco0447Ай бұрын
mostly the aerodynamic side of things
@MrTL3wisАй бұрын
You can't possibly know how lucky you are to have gone through that program. It's 32 years after I first walked into an FSAE shop and it was probably the biggest single event of my entire life. Great stuff!
@ThomasWindersАй бұрын
Overclocking on that board? Hmm that doesn't looks so... Oh boy this remember me of my very first attempt in watercooling where I used a jar too as a reservoir back in the times of the Intel Prescotts! I remember having an ATI (yes it was ATI, not yet AMD) Radeon 9800 pro, bios modded @ XT and watercooled too... I was able to beat the hell out of that card!
@brandonpryor5306Ай бұрын
Chico state in chico California nice build
@JonathanRCross2 ай бұрын
One of my second 'proper' cars was an NB MX5 / Miata. Same colour as this one, but 2003, so 16in Wheels vs these 15s. then 'upgraded' it to a Lotus Elise (amazing car), then an Mazda Mk3, M3 Convertible (also pretty damn fine - apart from it not being the coupe) and then a Focus ST. Safe to say i bought another NB Mx5 because out of all those nice Cars I've had, the mk2 Mazda was by far the best balanced driving tool I've owned. the best balance of Speed/Handling/Grip/Practicality out of all of them. Just wish they didn't rust so much!
@expertbv2 ай бұрын
nice work! 😎🤩
@sa6kod1542 ай бұрын
THE STIG!!
@Ash_Fritsch2 ай бұрын
It has been confirmed! Women like miatas! Its not a gay car!!
@ryanhurst38592 ай бұрын
How have you not clipped that smooth pickup into a KZread/IG/TikTok short/reel? Will go viral for sure.
@mnal5gex2 ай бұрын
Miata update please
@20spray12 ай бұрын
FSAE? I was a part of UHM's FSAE team. Fucking stressful project but I'd do it all over again
@luieflores59153 ай бұрын
I have a NA n it attacks girls like no other. Get a Miata in high school boys, guys will hate but girls will love. Thank me later
@CommentingTheTruth4 ай бұрын
What should a clean 99-2002 go for?
@cagednstatic4 ай бұрын
“You feel every bump” yeah because that’s called bump steer
@GavinRemme2 ай бұрын
Bump steer is when steering angle changes as a result of suspension compression. I have no evidence for this being the case; what makes you think that?
@cagednstatic4 ай бұрын
Autocros is all i need to hear
@cagednstatic4 ай бұрын
2k to fix ac. My camery had 468k this kids the guy you dont want to buy a miata from. He wore a mask and drifts an open diff. Looser then he talks about Grocery bags and getting sunburnt. Duh, you bought the most inconvenient car you can get the fuck bring back bull*ing.
@cagednstatic4 ай бұрын
Your ac went out… so bought a miata dude needs ac I bet his fingernails have never been dirty in his life probably works at a convenience store.
@newlearner87015 ай бұрын
Great video man thanks
@TheDIMONART5 ай бұрын
Underclocking can be useful for old games, but you need to slow it even more, to 100Mhz
@zhnkbr5 ай бұрын
Mine also died after a stop going uphill too! Couldn’t figure out what it was after checking forever!
@omrode54835 ай бұрын
Trust me when you said that you were facing a problem in Noise. And noise levels were near 124 decibels. We literally faced the same issue during our noise. But it was mainly due to echoing of sound in sidepods as the muffler was enclosed within the sidepods. We got it fixed by removing the sidepod and retesting again. This time it was around 105 at 7500 rpm. Unfortunately we couldn't attempt brakes. As we were past the deadline. I was responsible for Electronics and tuning in my team for 3 years and graduating this year as a captain. I could relate to the pain of not having the base map and also the engine parameters with you when you are starting from scratch. Anyways great job with the vehicle!
@lucasceleste47436 ай бұрын
Hell yeah brother
@smoltedo6 ай бұрын
How did yo adapt the cooler (not the fan, the heatsink) for the laptop? I did not understand it
@harrisappleton58665 ай бұрын
He just dropped it on, its not mounted at all really. Gravity
@Gauges516 ай бұрын
He should have did an edit driving off after the ladies and let it go would have been fun!
@solonskarlatos4236 ай бұрын
Where'd ya get the seat covers? How do you like them?
@GavinRemme4 ай бұрын
I don’t have seat covers
@dlablo71846 ай бұрын
Adding antifreeze is not a good idea. You are better off just using distilled water. And also i can see your jar still has holes on top, which means the water can evaporate over time and you need to fill it up when it's level decreases. Also if your radiator is aluminum and your cpu block is copper this will lead to corrosion over time, and eventually a leak.
@loftbuckleyrc7 ай бұрын
Vertical and horizontal stabilizers are too unstable, needs a more rigid fuse. But, it flies!
@loftbuckleyrc7 ай бұрын
Good video, you are a smart young man, probably have a degree by now. You will be successful. This is a great hobby and needs more creativity. Keep at it. Great old man hobby!.
@mr.adventure5597 ай бұрын
Low end torque is very important in those events.
@brookem6597 ай бұрын
Thanks for uploading this!
@suntzu61227 ай бұрын
Hey dude is there any good way (for free or low cost) to learn how to use an Emrax motor (axial flux)? Im looking for resources to learn :D Love channels like this! SAE is so cool!
@GavinRemme7 ай бұрын
I am not very familiar with that motor other than it’s used by a ton of EV teams. I’d recommend reading tech reports from other teams as a place to start. See what type of motor control they’re using and work from there. That’d be where I would start!
@suntzu61227 ай бұрын
@@GavinRemme Where are these tech reports? Thank you :D
@GavinRemme6 ай бұрын
Google lol some teams publish them. Also look at the FSAE website
@dair9197 ай бұрын
Cool mum!
@LONELY-x9k7 ай бұрын
would love to see an update on your car! I myself am in a FS team but in germany, Im doing driverless
Пікірлер
Will it survive heavy wake or waves?
No, definitely wouldn’t take it out into any large bodies of water. I’ve had a few big boats go by and wouldn’t want any bigger waves
Proud
I want a under-water pov and how fast does that go
About 4 miles per hour! Doesn’t sound fast but for a small boat it’s not bad
Isn't the point of kayaking to paddle?
but i didn’t wanna
Can’t wait to see the full build! Any ideas on how to build a rudder system like that for an inflatable kayak? Lol
I feel like kayaks arent supposed to have a motor!
It’s much more fun with one 🤓
As someone who loves to kayak but has lower back issues, I can say some people need motors on their kayaks. Building this would be great because I’ve been thinking about how to put a motor on my current kayak as opposed to buying a new motorized one.
Great job! surprisingly fast
Can you share to me how did you build it sir?
I’ll have a full video posted on my channel soon!
My dad running s soon as i pop out:
try to cooling cpu laptop we the mxm gpu cooler
If it has suspension its a car, not a kart.
Try a new thermostat and rad flush or waterweter and don't buy tecnacoilovers
Very nice in mint great buy😅
Adjustability in suspension is super super important, as you will never get it just right on paper. For example, go online and look at the Technical Manual for the Tatuus T318. This is a top level race car, used for FIA International Formula 3. Go to Rear Suspension Geometry 5.6.2.1.2, and look at all the different combinations that are designed into the pickup points on the transmission housing. 28 different combinations of pick up points that change the way the rear suspension works..! You should design the space frame to utilize a rigid steel interface plates. Different interface plates can then be used to change your pick up points. These can also be precision machined to make up for fab tolerance issues in the machine frame, so that your suspension pick ups are precise to machining tolerances.
1400 megahertz 2000 megahertz processors on all cores perform best
What kinda shocks.can you use?
god i'd love to build one
mostly the aerodynamic side of things
You can't possibly know how lucky you are to have gone through that program. It's 32 years after I first walked into an FSAE shop and it was probably the biggest single event of my entire life. Great stuff!
Overclocking on that board? Hmm that doesn't looks so... Oh boy this remember me of my very first attempt in watercooling where I used a jar too as a reservoir back in the times of the Intel Prescotts! I remember having an ATI (yes it was ATI, not yet AMD) Radeon 9800 pro, bios modded @ XT and watercooled too... I was able to beat the hell out of that card!
Chico state in chico California nice build
One of my second 'proper' cars was an NB MX5 / Miata. Same colour as this one, but 2003, so 16in Wheels vs these 15s. then 'upgraded' it to a Lotus Elise (amazing car), then an Mazda Mk3, M3 Convertible (also pretty damn fine - apart from it not being the coupe) and then a Focus ST. Safe to say i bought another NB Mx5 because out of all those nice Cars I've had, the mk2 Mazda was by far the best balanced driving tool I've owned. the best balance of Speed/Handling/Grip/Practicality out of all of them. Just wish they didn't rust so much!
nice work! 😎🤩
THE STIG!!
It has been confirmed! Women like miatas! Its not a gay car!!
How have you not clipped that smooth pickup into a KZread/IG/TikTok short/reel? Will go viral for sure.
Miata update please
FSAE? I was a part of UHM's FSAE team. Fucking stressful project but I'd do it all over again
I have a NA n it attacks girls like no other. Get a Miata in high school boys, guys will hate but girls will love. Thank me later
What should a clean 99-2002 go for?
“You feel every bump” yeah because that’s called bump steer
Bump steer is when steering angle changes as a result of suspension compression. I have no evidence for this being the case; what makes you think that?
Autocros is all i need to hear
2k to fix ac. My camery had 468k this kids the guy you dont want to buy a miata from. He wore a mask and drifts an open diff. Looser then he talks about Grocery bags and getting sunburnt. Duh, you bought the most inconvenient car you can get the fuck bring back bull*ing.
Your ac went out… so bought a miata dude needs ac I bet his fingernails have never been dirty in his life probably works at a convenience store.
Great video man thanks
Underclocking can be useful for old games, but you need to slow it even more, to 100Mhz
Mine also died after a stop going uphill too! Couldn’t figure out what it was after checking forever!
Trust me when you said that you were facing a problem in Noise. And noise levels were near 124 decibels. We literally faced the same issue during our noise. But it was mainly due to echoing of sound in sidepods as the muffler was enclosed within the sidepods. We got it fixed by removing the sidepod and retesting again. This time it was around 105 at 7500 rpm. Unfortunately we couldn't attempt brakes. As we were past the deadline. I was responsible for Electronics and tuning in my team for 3 years and graduating this year as a captain. I could relate to the pain of not having the base map and also the engine parameters with you when you are starting from scratch. Anyways great job with the vehicle!
Hell yeah brother
How did yo adapt the cooler (not the fan, the heatsink) for the laptop? I did not understand it
He just dropped it on, its not mounted at all really. Gravity
He should have did an edit driving off after the ladies and let it go would have been fun!
Where'd ya get the seat covers? How do you like them?
I don’t have seat covers
Adding antifreeze is not a good idea. You are better off just using distilled water. And also i can see your jar still has holes on top, which means the water can evaporate over time and you need to fill it up when it's level decreases. Also if your radiator is aluminum and your cpu block is copper this will lead to corrosion over time, and eventually a leak.
Vertical and horizontal stabilizers are too unstable, needs a more rigid fuse. But, it flies!
Good video, you are a smart young man, probably have a degree by now. You will be successful. This is a great hobby and needs more creativity. Keep at it. Great old man hobby!.
Low end torque is very important in those events.
Thanks for uploading this!
Hey dude is there any good way (for free or low cost) to learn how to use an Emrax motor (axial flux)? Im looking for resources to learn :D Love channels like this! SAE is so cool!
I am not very familiar with that motor other than it’s used by a ton of EV teams. I’d recommend reading tech reports from other teams as a place to start. See what type of motor control they’re using and work from there. That’d be where I would start!
@@GavinRemme Where are these tech reports? Thank you :D
Google lol some teams publish them. Also look at the FSAE website
Cool mum!
would love to see an update on your car! I myself am in a FS team but in germany, Im doing driverless
😊