never seen this colour before and it is amazing! Unfortunately in Greece this is not being offered with tubeless tyres...
@classicrider527411 күн бұрын
Take care with services, some dealers may be less expensive but will they do all the work they should? I had the old model and the dealer I used did not check tappets at the first service because in their opinion, they did not need to, even though it was detailed in the service schedule.
@mechanical-adventrues13 күн бұрын
What exhaust
@ultra814218 күн бұрын
Which Country
@pabloitare23 күн бұрын
Hi! Wich Mitas on the front? Thaks🙌🏼
@Lifes_g00dАй бұрын
Too much surrounding noises, try to upgrade your mice as it captures the wind noise..
@timothybrockbank7474Ай бұрын
Looks lovely have fun
@TwoWheelerSparkyАй бұрын
I had a quick look at one in a bike shop today. In comparison to my 300 Rally, they feel quite top heavy with that little side stand.. Hopefully that's not the case once they're on the move? I might try and take one for a spin!
@ChrisC85Ай бұрын
It does feel very heavy lifting off the stand like you mentioned but on the move it's not noticeable at all!
@jdabel1Ай бұрын
Certainly not heavy on the move or offroad. I bought mine for mostly offroad and I'm very impressed as it is also excellent on road. As far as the stand, that doesn't bother me. It's something I never noticed when testing. However, if you turn the bars to the far right before lifting, it lifts much easier.
@tatasth8559Ай бұрын
Looks ready for some exploring 😊
@jb-lu4voАй бұрын
Very nice bike and very good bike. Price quality seems to me to be the best on the current market, enjoy it, and make more videos about this bike with its good and less good parts. Thanks for the video and take care.
@mark.e.pАй бұрын
If you want to do off roading those tyres are pants!
@johnharris7353Ай бұрын
It's a good looking bike, l luuv the color!
@iuliandan3632 ай бұрын
I just restart my freelander 1.8, for the first time after, rebuild all engine. I double check all the electrical conection and fluidd, but hase same metalic sound like yours, and have some idle variation. Is normal? The idle variation can be from the small batery that i took from my 1.6 Toyota Corolla. I apreciate any advice. Thank you so much!!
@JoeRogerson-mr2wu2 ай бұрын
Missed the turn, ended up riding Peddars Way footpath, then the left at 17:13 completely off-piste....The woods with the bomb hole are also off-piste. Not a great advert for legal green laners...
@tamayaytam2 ай бұрын
Looks slick man.
@greenrush43132 ай бұрын
Hey Chris danks for da bag of chips and burger it was a pleasure.
@lostbeast7822 ай бұрын
Mate, you gotta do something about the audio. I can barely hear while you ride. Btw good choice on the colour there. Cheers
@ChrisC852 ай бұрын
Working on it👍
@jeffersonnny2 ай бұрын
And also "um... um...."
@Bob-oo7sm2 ай бұрын
Still waiting for mine to turn up .I ordered the tubeless model
@jimmyjam87952 ай бұрын
They are a bit delayed aren't they! Ordered mine Nov 23 but cancelled order after riding dealer demo bike. Far too much vibration. Just picked up shotgun 650 instead.
@ChrisC852 ай бұрын
@@jimmyjam8795 I really wonder if the vibration differs between bikes? I'm at around 250 miles now and it's getting sweeter and smoother every ride.
@Bob-oo7sm2 ай бұрын
@@ChrisC85 I didn't find it that bad on demo bike to be honest .but I guess each to their own .I took out the Honda nx500 and like the new Himalayan better hence that's why I ordered one.
@nesciusplayground2 ай бұрын
@@ChrisC85 Some people are just overly picky and like to complain about non issues
@RS235452 ай бұрын
first thing you hv to do is change the tyres.
@ChrisC852 ай бұрын
That's on the list👍
@jimmyjam87952 ай бұрын
No need really, only if you want off road tyres!
@ogasi17982 ай бұрын
bloody good looker that is fella well done - I am amazed though - 2 weeks and 100 miles??? , i remember running my 1st new bike in, was done in a day and half - 500 miles motorway and a-roads and then day 2 rode 100 miles down to the dealer for oil #1 AND BOOM, HAPPY BIKER - revs up, smiles wide
@Cavallaro993 ай бұрын
I cant hear you too wheel when you are riding the bike, sorry :/
@oldgrowler5 ай бұрын
Not sure if you'll get this comment, how do you find fantic v honda? I take it the fantic casa is same as xef250 trail they now sell and I've had a little go on that on a short byway and the Honda I only tested on road but it had upgraded suspension. But in real life riding together how does fantic compare to softer honda? Please
@Miky98Sky7 ай бұрын
Hi chris ! Now the bike run ok ? How you solved ?
@mesco820010 ай бұрын
Can do low 6s from standstill but difficult to get traction 👍🏻. Really Fast from 30mph to 85mph in 3rd
@chrisneumeister979410 ай бұрын
Kurbelgehäuseunterdruckleitung verstopft oder Drucksensor defekt !
@chrisneumeister979410 ай бұрын
(CCPS!)
@charliespann396710 ай бұрын
I want to see you put the front end on it. Great looking engine and great workmanship.
@tacoooooo1111110 ай бұрын
Did you end up fixing it? My 23 150 TPI does the same thing.
@jozeluixjozeluix9 ай бұрын
I guess all of us with 2023 150’s are having the same issues. Mine does the same thing. Just bought a crank case pressure sensor to see if it fixes it.
@nirkardni18669 ай бұрын
@@jozeluixjozeluix did it help?
@jozeluixjozeluix8 ай бұрын
@@nirkardni1866it did not, i also used a br8eix soark plug and changed the fuel line filter. Still the same. Might end up getting the tsp head and tune.
@Miky98Sky7 ай бұрын
HI! I have a 2021 husqvarna 150 tpi... basically has the same problem. before getting into torque if I do a good acceleration it gets dirty for 2 seconds before getting into torque. furthermore, the sensation is that of having a bike that is always cold... let's not talk about map 2, the more "delicate" one.... this map is a disaster, compared to the more aggressive map. today for the umpteenth time I'm going to look for a solution, now my days are based on this. if you have any advice share it because I think helping each other is the best way to not go crazy.
@jozeluixjozeluix7 ай бұрын
@@Miky98Sky you have instagram? Maybe we can find the solution together😂
@mariuszuk79 Жыл бұрын
So how does Fantic 250 compare to crf300l ? 🤔
@MarioRossi-no7hs Жыл бұрын
Impressive
@zackdontas1213 Жыл бұрын
I'm having that same problem thought it was my valve stems seals and sadly I was wrong
@cep8214 Жыл бұрын
How do you like the Rekluse?
@bobbyharris6099 Жыл бұрын
Very impressive look keep up the good work 🇯🇲
@6Twisted2 жыл бұрын
I've done 1000 miles on my road bike in 2 years so I sold it for a Fantic 250 which arrives in two days. Hopefully it keeps me more entertained.
@peakyblinder28472 жыл бұрын
👍👍👍👍
@mikelivsey2 жыл бұрын
Nice video. Great track
@alvaromartinez30552 жыл бұрын
I was there.
@dannythomas91762 жыл бұрын
hi there great video looks fun i was wondering if you could tell me where is the best place to start the pedders way track as i know there is a few sections to it from thetford to hunstanton
@Volfmech3 жыл бұрын
I'm a simple man. I see a K series turbo shoe horned into a Clubman and I hit like :D
@malcolmlane-ley20444 жыл бұрын
Nice car, strange steering technique
@ravisidhu16674 жыл бұрын
Dusted the 206
@greatbritannialine4 жыл бұрын
That exhaust sounds epic! What exhaust you got on there mate?
@pastytit4 жыл бұрын
Amazing work
@nikosdr99204 жыл бұрын
very nice!
@D4VE264 жыл бұрын
Oh dear what happened?
@ChrisC854 жыл бұрын
It cracked the block between cylinders!
@D4VE264 жыл бұрын
@@ChrisC85 the block! Wow what was the cause?
@greatbritannialine4 жыл бұрын
@@D4VE26 it was bored out to 1380 so maybe there was too much stress on it with too little metal, but I'm not sure for certain
@punkhawk32465 жыл бұрын
What handling upgrades have you done?
@ChrisC855 жыл бұрын
Red dot cones, Gaz dampers, degree neg camber front and rear, solid subframe mounts.. All the normal mods really. I think it handles well
@punkhawk32465 жыл бұрын
@@ChrisC85 Looks incredible around corners 😂
@pauljeffries5 жыл бұрын
Great video, sorry that the engine didn't want to play anymore 😐
@TheGentlemensMotorRacingTeam5 жыл бұрын
looks great fun
@ChrisC855 жыл бұрын
It's a grear little track.. gutted about my engine
@deannewton54585 жыл бұрын
Well done buddy that engine sounds SWEET More videos
Пікірлер
hey bro, Are the tires tubeless?
never seen this colour before and it is amazing! Unfortunately in Greece this is not being offered with tubeless tyres...
Take care with services, some dealers may be less expensive but will they do all the work they should? I had the old model and the dealer I used did not check tappets at the first service because in their opinion, they did not need to, even though it was detailed in the service schedule.
What exhaust
Which Country
Hi! Wich Mitas on the front? Thaks🙌🏼
Too much surrounding noises, try to upgrade your mice as it captures the wind noise..
Looks lovely have fun
I had a quick look at one in a bike shop today. In comparison to my 300 Rally, they feel quite top heavy with that little side stand.. Hopefully that's not the case once they're on the move? I might try and take one for a spin!
It does feel very heavy lifting off the stand like you mentioned but on the move it's not noticeable at all!
Certainly not heavy on the move or offroad. I bought mine for mostly offroad and I'm very impressed as it is also excellent on road. As far as the stand, that doesn't bother me. It's something I never noticed when testing. However, if you turn the bars to the far right before lifting, it lifts much easier.
Looks ready for some exploring 😊
Very nice bike and very good bike. Price quality seems to me to be the best on the current market, enjoy it, and make more videos about this bike with its good and less good parts. Thanks for the video and take care.
If you want to do off roading those tyres are pants!
It's a good looking bike, l luuv the color!
I just restart my freelander 1.8, for the first time after, rebuild all engine. I double check all the electrical conection and fluidd, but hase same metalic sound like yours, and have some idle variation. Is normal? The idle variation can be from the small batery that i took from my 1.6 Toyota Corolla. I apreciate any advice. Thank you so much!!
Missed the turn, ended up riding Peddars Way footpath, then the left at 17:13 completely off-piste....The woods with the bomb hole are also off-piste. Not a great advert for legal green laners...
Looks slick man.
Hey Chris danks for da bag of chips and burger it was a pleasure.
Mate, you gotta do something about the audio. I can barely hear while you ride. Btw good choice on the colour there. Cheers
Working on it👍
And also "um... um...."
Still waiting for mine to turn up .I ordered the tubeless model
They are a bit delayed aren't they! Ordered mine Nov 23 but cancelled order after riding dealer demo bike. Far too much vibration. Just picked up shotgun 650 instead.
@@jimmyjam8795 I really wonder if the vibration differs between bikes? I'm at around 250 miles now and it's getting sweeter and smoother every ride.
@@ChrisC85 I didn't find it that bad on demo bike to be honest .but I guess each to their own .I took out the Honda nx500 and like the new Himalayan better hence that's why I ordered one.
@@ChrisC85 Some people are just overly picky and like to complain about non issues
first thing you hv to do is change the tyres.
That's on the list👍
No need really, only if you want off road tyres!
bloody good looker that is fella well done - I am amazed though - 2 weeks and 100 miles??? , i remember running my 1st new bike in, was done in a day and half - 500 miles motorway and a-roads and then day 2 rode 100 miles down to the dealer for oil #1 AND BOOM, HAPPY BIKER - revs up, smiles wide
I cant hear you too wheel when you are riding the bike, sorry :/
Not sure if you'll get this comment, how do you find fantic v honda? I take it the fantic casa is same as xef250 trail they now sell and I've had a little go on that on a short byway and the Honda I only tested on road but it had upgraded suspension. But in real life riding together how does fantic compare to softer honda? Please
Hi chris ! Now the bike run ok ? How you solved ?
Can do low 6s from standstill but difficult to get traction 👍🏻. Really Fast from 30mph to 85mph in 3rd
Kurbelgehäuseunterdruckleitung verstopft oder Drucksensor defekt !
(CCPS!)
I want to see you put the front end on it. Great looking engine and great workmanship.
Did you end up fixing it? My 23 150 TPI does the same thing.
I guess all of us with 2023 150’s are having the same issues. Mine does the same thing. Just bought a crank case pressure sensor to see if it fixes it.
@@jozeluixjozeluix did it help?
@@nirkardni1866it did not, i also used a br8eix soark plug and changed the fuel line filter. Still the same. Might end up getting the tsp head and tune.
HI! I have a 2021 husqvarna 150 tpi... basically has the same problem. before getting into torque if I do a good acceleration it gets dirty for 2 seconds before getting into torque. furthermore, the sensation is that of having a bike that is always cold... let's not talk about map 2, the more "delicate" one.... this map is a disaster, compared to the more aggressive map. today for the umpteenth time I'm going to look for a solution, now my days are based on this. if you have any advice share it because I think helping each other is the best way to not go crazy.
@@Miky98Sky you have instagram? Maybe we can find the solution together😂
So how does Fantic 250 compare to crf300l ? 🤔
Impressive
I'm having that same problem thought it was my valve stems seals and sadly I was wrong
How do you like the Rekluse?
Very impressive look keep up the good work 🇯🇲
I've done 1000 miles on my road bike in 2 years so I sold it for a Fantic 250 which arrives in two days. Hopefully it keeps me more entertained.
👍👍👍👍
Nice video. Great track
I was there.
hi there great video looks fun i was wondering if you could tell me where is the best place to start the pedders way track as i know there is a few sections to it from thetford to hunstanton
I'm a simple man. I see a K series turbo shoe horned into a Clubman and I hit like :D
Nice car, strange steering technique
Dusted the 206
That exhaust sounds epic! What exhaust you got on there mate?
Amazing work
very nice!
Oh dear what happened?
It cracked the block between cylinders!
@@ChrisC85 the block! Wow what was the cause?
@@D4VE26 it was bored out to 1380 so maybe there was too much stress on it with too little metal, but I'm not sure for certain
What handling upgrades have you done?
Red dot cones, Gaz dampers, degree neg camber front and rear, solid subframe mounts.. All the normal mods really. I think it handles well
@@ChrisC85 Looks incredible around corners 😂
Great video, sorry that the engine didn't want to play anymore 😐
looks great fun
It's a grear little track.. gutted about my engine
Well done buddy that engine sounds SWEET More videos