I wired mine just like yours. The 2nd speed fan kicked on for a few seconds and only one fan was working. Now its back to 1st speed and both fans work. So not sure whats going on.
@JeremyWilson-vu2pw11 ай бұрын
This way works can even test if first using a relay already in the truck like I took out my horn relay, and wired it like he wired this one, tested and has everything working currently now all I have to do is get a replacement horn relay.
@2620patrol11 ай бұрын
Nice explanation, but you can eliminate the middleman relay by taping from pin 86 on the ac relay (which gives control ground from bcm )to your pin 86 of the fan relay. 😉
@TheMonstervirus11 ай бұрын
Can you explain it in more detail please, im making a relay this way to because black bear performance suggest to make it the same way the OP just explained. But it sounds alot better the way your saying it, please clarify.
@JeremyWilson-vu2pw11 ай бұрын
@@TheMonstervirus Take pin 86 from AC relay, wire straight to pin 86 on fan relay. Ac relay should be in big fuse box marked AC relay and fan relay should be in small fan fuse box marked fan relay. One wore just go from pin 86 on one to pin 86 on the other. Does that help?
@JeremyWilson-vu2pw11 ай бұрын
I tried this a/c pin 86 to pin 86 or fan relay method but it doesn’t work completely correctly.
@JeremyWilson-vu2pw11 ай бұрын
So I went with the original from the video and it worked
@IndiansAuto3 ай бұрын
If you do this the AC compressor will turn on whenever the Fans turn on. Not a good idea
@familyfamily1024 Жыл бұрын
Great job! Thank you.
@OBS_DD Жыл бұрын
thanks my ls swap obs chevy has that setup been trying to get a/c hooked up for a week now all I caught was headaches thanks
@keithmitchko1386 Жыл бұрын
What did you set your ecu to? The second mine in running the fans kick on, doesn't matter what temperature it is. Already did the relay wiring.
@douglasgarcia2731 Жыл бұрын
Did you figure out what was wrong? mine also as soon as I turn the truck on the fans turn on I have GREEN WIRE TO BLUE PLUG #42 / Blue wire to red plug #33
@keithmitchko1386 Жыл бұрын
@douglasgarcia2731 what year do you have? There was a fan setting that needed to be turned on but I don't remember off hand which one.
@curtisvanleeuwen5101 Жыл бұрын
Best video I could find, seems everyone is fine with not having ac after this mod. Thanks for the help hope this video is still up when I need it again
@christopherhernandez91152 жыл бұрын
How where the fan set on the tune ?
@Andy-ue3dv3 жыл бұрын
I'm about to wire up the 3 relay hi/low with 05+ efans and 2 temp. switches. (Not using the factory harness/ecu). I only found one forum with this info, but your video helped with a better visual explanation. Thanks for sharing
@joaquinguerrero90603 жыл бұрын
Great video
@tuscani9154 жыл бұрын
Is your truck tuned for the other fan to kick on, you dont mentioned that part.
@alonsovelazquez93315 жыл бұрын
you are a wizard
@CrzyMav5 жыл бұрын
How long and what are the dimensions on the correct tool rods??
@IgorGutman6 жыл бұрын
How do they compare against the IPFU pants?
@dianalanders24579 жыл бұрын
Yes the larger seam across the butt is weird. I foresee some folks with raspberries. But how did they do through the winter? Did you end up wearing your "ninjas"? :)
Пікірлер
I wired mine just like yours. The 2nd speed fan kicked on for a few seconds and only one fan was working. Now its back to 1st speed and both fans work. So not sure whats going on.
This way works can even test if first using a relay already in the truck like I took out my horn relay, and wired it like he wired this one, tested and has everything working currently now all I have to do is get a replacement horn relay.
Nice explanation, but you can eliminate the middleman relay by taping from pin 86 on the ac relay (which gives control ground from bcm )to your pin 86 of the fan relay. 😉
Can you explain it in more detail please, im making a relay this way to because black bear performance suggest to make it the same way the OP just explained. But it sounds alot better the way your saying it, please clarify.
@@TheMonstervirus Take pin 86 from AC relay, wire straight to pin 86 on fan relay. Ac relay should be in big fuse box marked AC relay and fan relay should be in small fan fuse box marked fan relay. One wore just go from pin 86 on one to pin 86 on the other. Does that help?
I tried this a/c pin 86 to pin 86 or fan relay method but it doesn’t work completely correctly.
So I went with the original from the video and it worked
If you do this the AC compressor will turn on whenever the Fans turn on. Not a good idea
Great job! Thank you.
thanks my ls swap obs chevy has that setup been trying to get a/c hooked up for a week now all I caught was headaches thanks
What did you set your ecu to? The second mine in running the fans kick on, doesn't matter what temperature it is. Already did the relay wiring.
Did you figure out what was wrong? mine also as soon as I turn the truck on the fans turn on I have GREEN WIRE TO BLUE PLUG #42 / Blue wire to red plug #33
@douglasgarcia2731 what year do you have? There was a fan setting that needed to be turned on but I don't remember off hand which one.
Best video I could find, seems everyone is fine with not having ac after this mod. Thanks for the help hope this video is still up when I need it again
How where the fan set on the tune ?
I'm about to wire up the 3 relay hi/low with 05+ efans and 2 temp. switches. (Not using the factory harness/ecu). I only found one forum with this info, but your video helped with a better visual explanation. Thanks for sharing
Great video
Is your truck tuned for the other fan to kick on, you dont mentioned that part.
you are a wizard
How long and what are the dimensions on the correct tool rods??
How do they compare against the IPFU pants?
Yes the larger seam across the butt is weird. I foresee some folks with raspberries. But how did they do through the winter? Did you end up wearing your "ninjas"? :)
They look as shitty as what we have now