What is going on?! Welcome to my Motovlog Channel where I share my journey and adventures with my 2023 Honda Grom & 2023 CB650R. Please like & subscribe!
sick type r and ep3 SI and cb. I aspire to be like this man one day
@dougmaverick3287Ай бұрын
Just curious but are you a Honda fanboy???
@MotoJaceeeАй бұрын
Yes i am a honda fanboy
@gjj665j66Ай бұрын
Thanks to your video I ordered one as well, but with a different muffler. I'll upload a few videos of the sound, it sounds amazing.
@MotoJaceeeАй бұрын
Your welcome! I have about 2200 miles on the exhaust and so far so good. No issues with the welds and it is holding up. Fyi, When you’re installing the header part, don’t tighten all the bolts until everything is aligned. And check for leaks on where the headers and engine block meets.
@user-be9ok4yo1mАй бұрын
How to install tachometer ?
@METALHEADNYC22 күн бұрын
Don't need one, the sound of the engine is your tach
@moe.hАй бұрын
How many copper washers did you put with drain bolt?
@MotoJaceeeАй бұрын
Just one. I used the OEM honda crush washer 12mm.
@HuberHeinrichHuberАй бұрын
Schön sauber , dein Motorrad 😊! Ich fahre mit der Cb 650R durch den Monsunregen Dschungel etc , und die Cb, sieht aus wie ein Baufahrzeug mit Satteltaschen 😊. Was interessiert Dreck?! Ich will Cb 650 R fahren 😊. Gruss u Danke . Thailand 1959.
@MotocrossGuru-zf8pkАй бұрын
ive had a better philly at geno’s
@NickSwanson-ms5vvАй бұрын
How do you like it long term? Looking at one for mine and was wondering after 8 months if you still like it
@MotoJaceeeАй бұрын
Hi there! so I have ridden the bike with the ebay special exhaust for about 2000 miles and so far I still like the sound. Is it loud? Yes... any aftermarket exhaust with a cat delete will be loud but I do miss the stock exhaust from time to time. I really got the exhaust for me to be heard by other cars/drivers who are usually not paying attention.
@NickSwanson-ms5vvАй бұрын
@@MotoJaceee I’ll do a little more research but this is the best looking exhaust I’ve found and from what I’ve heard it’s one of the better sounding for the price. Good to know it’s still enjoyable after that long. I got the bike back in December and have got 4000+ miles on it already but I’ve had more than a few instances of people not knowing I was around them
@davidmanning48142 ай бұрын
hi motoJACE did you tune your bike after your exhaust in stall.
@MotoJaceeeАй бұрын
Hi there! I did not tune the bike. It is running great even without a tune but it could free up more Hp/Tq if it is tuned. Rode the bike with the exhaust for 2k miles and no issues at this point.
@Aleph10102 ай бұрын
Hey bud, thanks for the info. What length drain plug did you order, the link on Amazon has 3 options. Cheers
@MotoJaceee2 ай бұрын
Hey bud! I ordered the M12 x 1.5. M12 is the size of the bolt and 1.5 is the thread pitch.
@jal1872 ай бұрын
Gold Plug or nothing....
@danicosanchez16672 ай бұрын
how's the wind at 80 mph? figured without a windscreen its hell?
@MotoJaceee2 ай бұрын
Depends on the day. If there is a head wind then it is bad. If there is not it’s tolerable. Tucking in is your best bet.
@wolfgang44942 ай бұрын
I used a custom ixil exhaust before but the sound was obnoxiously loud i feel emberassed everytime at trafic lights, cold start in the morning, etc..maybe its just me, but ull get tired of loud exhaust pretty quick. But whatever makes u happy bros..just have to consider people around you.. 😅
@inodoge18972 ай бұрын
Plan on getting 1 soon but that bracket look sketchy.
@MotoJaceee2 ай бұрын
For the money, it’s surprisingly pretty good. The exhaust bracket?
@inodoge18972 ай бұрын
Yeah @10:50. Real value for money, you can even put a legit slip on on that thing if you have extra cash.
@CapJoy20232 ай бұрын
Nice from CT same bike, its absolute joy man.
@MotoJaceee2 ай бұрын
One of the best bikes of its class!
@donbraham4112 ай бұрын
Nice
@user-gg8tq2bx9r2 ай бұрын
Вуха не боліли з таким вихлопом на довгу дистанцію ? )) А так ставлю лайк!
@MotoJaceee2 ай бұрын
It does hurt but it is so good! Music to my ears!
@BayStateFishing3 ай бұрын
Did you replace the copper header gaskets?
@MotoJaceee2 ай бұрын
No, I used the original one and no leaks. The gasket had 600 miles on it
@nouyansyed31713 ай бұрын
any updates??
@MotoJaceee3 ай бұрын
Hey Buddy! So I put in about 1200 miles on the exhaust and it is still holding good. Still sounds good and no issues. I will update in a couple of months as riding season is just about to start here in the northeast
@nouyansyed31713 ай бұрын
@@MotoJaceee awesome man i appreciate it!
@iamtheiceman3 ай бұрын
Thank you for using (liters) when filling it with oil. Quarts is such a bad measurement.
@mircea50133 ай бұрын
well, that exhaust is tiring, I have to say..
@davidrobertson67794 ай бұрын
What is the exhaust exactly? ...sounds great
@MotoJaceee3 ай бұрын
It’s the eBay special. K.O. Lightning Exhaust. www.ebay.com/itm/204167902490?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dyrdlhfhrbo&sssrc=4429486&ssuid=zZ3l0KDwRxS&var=&widget_ver=artemis&media=COPY
@jeovanyreyes78544 ай бұрын
I just installed the full system exhaust on my Honda cbr 650 but now there’s black liquid coming out from the headers how can I fix this ?
@MotoJaceee3 ай бұрын
The black liquid is water/condensation which is normal just like in an automobile. It is water and carbon. I think it happens more when your bike is parked outside overnight.
@mat_prasto4 ай бұрын
What tank pads do you have, please? :)
@MotoJaceee2 ай бұрын
www.amazon.com/dp/B07WVFR6PP/ref=cm_sw_r_as_gl_api_gl_i_P9MQ4J1QXFMDS7Q06SZ8?linkCode=ml2&tag=motojace-20 Tech Spec Tank Grips
@carsonh68534 ай бұрын
What oil filter removal tool is that
@MotoJaceee4 ай бұрын
Just a regular oil filter remover from auto store. I have the one that attaches to a ratchet. It is the adjustable one.
@planb4life12344 ай бұрын
Did you use the copper washer like that bolt came with or steel like the books says to use?
@MotoJaceee4 ай бұрын
I don’t use the copper washer but the oem crush washer which is aluminum
@planb4life12344 ай бұрын
@@MotoJaceee I ended up biting the bullet and just ordering the correct pack on Amazon. Won’t be here until Sunday though sadly so bikes now out of commission. Thanks for the reply though. I was following a guide on the cb650r Reddit and the guy said they were steel washers which didn’t make sense
@MotoJaceee4 ай бұрын
@@planb4life1234 the copper one would definitely work. As long as you change it every oil change, you should be ok with cooper or aluminum. The part number for the OEM crush washer is 94109-12000.
@mindriddle4 ай бұрын
Nice bike man. I have the same 2023. Did yours come with a quick shifter installed already? I bought a knockoff one and it did not work, but I read that the 2023 and up required a specific one? Also, is yours lowered? I lowered mine using the t-rex racing lowering kit. Im 5'9" and needed about half inch to be able to flat foot it.
@MotoJaceee4 ай бұрын
Thanks man! I bought the OEM quick shifter after purchasing the bike. The 2020-2022 works with the 2023. Plug and play. Mine is not lowered.
@ceciliatabbi42185 ай бұрын
What are you using for the cleaning? That little spray can.
@MotoJaceee4 ай бұрын
Green can? That’s a break cleaner to just get the oil off where it dripped
@ceciliatabbi42184 ай бұрын
Ah, that makes sense :) Thank you! @@MotoJaceee
@The.JZA.5 ай бұрын
Man that's way too loud. The exhaust outlet is huge, like the size of a car. Oh well, to each their own.
@x_ghost_x66125 ай бұрын
I am curious as to what your first bike was. Nice video btw! Keep up the content! Do you do night rides?
@MotoJaceee5 ай бұрын
Hi! My first bike was Grom but I don’t know if I should really consider that as a bike lol but for full size bike, it is the CB650R. I do some night rides but not too much. Thanks!
@x_ghost_x66125 ай бұрын
@@MotoJaceee It has two wheels brother it's a bike! Haha! You need some Grom content to round out your channel! Thx for hitting me back!
@MotoJaceee5 ай бұрын
@@x_ghost_x6612 yes I do need some more Grom content! I gonna work on it! Thanks brother!
@raymunchieftain41705 ай бұрын
Hey MJ, how many miles on your HG and did you get your ECU reflashed after piping your ride up ?
@MotoJaceee5 ай бұрын
Hey! I have about 1300 miles on it to date. I didn't flash it.
@tamslove2ride5 ай бұрын
KM/H / MPH ?
@MotoJaceee5 ай бұрын
MPH
@Andy-fx4yk6 ай бұрын
Pwaaaaaah what a note jace❤from the UK
@nicun41026 ай бұрын
Hi, do u know if the bike need a remap after change the full exhaust ? I want to put one on my bike but I'm afraid to not cause the damage to the engine without remaping ...
@MotoJaceee5 ай бұрын
Hi, I did not remap the bike after the exhaust and it runs fine. It would benefit the bike from a remap/tune to increase HP/TQ
@emillutzkanov13486 ай бұрын
Im waiting for mine to be delivered at the end of march, black edition 2024 model. I love your videos, please keep uploading!
@maxim9135 ай бұрын
can you still get them without E clutch ?
@gaitocalico5 ай бұрын
@@maxim913 Yep, they have 2 separated model. Or you can just turn E-Clutch off.
@olaokolaok4 ай бұрын
Mine is being delivered tomorrow. Blue Matte, cannot fucking wait. Ride safe.
@lunarshteve3 ай бұрын
nice I didn't realize the 2024 model had a black edition, I thought they were all 2023 and only 180 Mads
@shauntylerfree82636 ай бұрын
Hi mate, sounds nice! I've been thinking about getting one but I'm not sure on the longevity of it. I'm not expecting a top notch standard as it's only an ebay special but i dont want to have to replace it again after a few months. Hows it holding out for you?
@MotoJaceee6 ай бұрын
Hey mate! So far it’s holding up good! I do not ride in the rain or snow often so the rusting part is kinda out of the equation. So far iv’e put 1k miles on it and it is holding up well. Only thing I noticed is that the silver color of the pipe turned into the same color as the wheels (bronze) which is cool because it blends well.
@shauntylerfree82636 ай бұрын
@@MotoJaceee thanks for the quick response. Ok awesome, sounds good to me!
@MotoJaceee6 ай бұрын
@@shauntylerfree8263 your welcome! Please hit subscribe when you get a chance! Thank you
@maxim.hnatiuk6 ай бұрын
Hello from Ukraine. Very nice pov ride video. Love these New Jersey views!
@MotoJaceee2 ай бұрын
Glad you like them! Thanks
@iklodyp6 ай бұрын
Hey man! Just found your channel through one of your older Honda CB650R rides. Great quality content! I was wondering if you ever tried the Honda CB300R? I'm asking because I’m watching videos to find out about what should be the first bike I own. And even though I wouldn't mind starting on a 300cc bike, in this economy I feel like selling it would be nearly impossible in order to upgrade and there is only about 3k$ difference. I wonder what’s your opinion about getting a Honda CB650R as a first bike. Pricier for sure, but I don't want to buy another one in a year or two and it appears to me that the CB650R might be a good choice being a beginner and for long term ownership as well. And that in line 4 sound... I'm in love with it. It has amazing reviews, haven’t heard anything bad about it so far (maybe that it's not that snappy with the throttle but I'm not an agressive driver anyway) everyone who rides it loves it. Do you think it works well as a beginner bike for a responsible rider? I would use it for city and longer trips as well. Thank you in advance! Have a good one!
@MotoJaceee6 ай бұрын
Hey bud! I haven’t ridden the CB300R. Technically, my CB650R is my second bike but it is my first full size bike. I bought a 23 Grom as my first bike back in June and 3 weeks later I purchased the CB650R. I love the Grom but I couldn’t take it to highways and needed something bigger. I initially was looking at the CB300 but I am glad I pulled the trigger on the CB650. No regrets! Love the bike all in all! I also knew I would wanted a 650 at one point so instead of having to upgrade the 300, I just went straight to it! It is powerful and snappy in my opinion but it is beginner friendly. Rode it for a 5 hour ride and it wasn’t bad. City Riding is also not bad. The only advantage of the CB300 is that it is lighter and easier to maneuver. If you really want comfort, I would look at the Rebel 300 or 500. Low seat height and more comfortable sitting position. Hope this helps and let me know what you ended up getting!
@TuanNguyen-nq3ri7 ай бұрын
Hi Jace! love the ride! May I have your Go Pro setting, please?
@MotoJaceee7 ай бұрын
Hey buddy! It’s a GoPro 11 Settings (4k, SuperView, 30 fps, Shutter 1/60, Iso 100, ND Filter, External Mic Zoom H1N)
@kevindias95187 ай бұрын
My headers keep hitting the oil pan I notice that when I tighten it it wants to hit the oil pan
@MotoJaceee5 ай бұрын
I had the same issue initially but I just re-aligned everything then tightened it and it gave me the OEM header clearance.
@vijayragoonanan64937 ай бұрын
Maybe you should of partially filled the new oil filter before installing & torque according to Honda recommendations so you don’t over tighten
@MotoJaceee5 ай бұрын
I don't torque the oil filter on anything. I always hand tight it and I've never had an issue on it coming loose. U can fill or not fill the filter before installing it also never had an issue when I don't pre fill it.
@BayStateFishing7 ай бұрын
That sounds so damn good on the open road
@harleking48337 ай бұрын
next time try making your intro even louder :) but nice video
@MotoJaceee5 ай бұрын
thanks for the feed back.. im working on the sound level lol
@JCclip58 ай бұрын
Do you have a video without db killer?
@MotoJaceee5 ай бұрын
the pull on the end of the video has no db killer. I feel like it sounds better without it.
@unnf99718 ай бұрын
More like aftermartket sound, nice ride nonetheless.
@aznpetyaw8 ай бұрын
How do you like the bike compare to other bikes you have riden?
@MotoJaceee8 ай бұрын
To be honest, this is my 2nd bike and my first one is a Honda Grom. This is my first full size bike. I’ve tested a Honda Rebel 300 which was a softer more comfy ride. I like the way the CB rides. Definitely have a sports bike feel on it!
@ThePresidentofMars6 ай бұрын
@MotoJaceee pretty much my intented path. This bike will be my first real bike after using a 125. Those are some lovely smooth rads
@MonsterDickBoy8 ай бұрын
disturbing people👎
@Lullaby9999999998 ай бұрын
Boring straight lines and loud for nothing...
@tahami41448 ай бұрын
I think bro loves honda too much Honda Civic Type R, Honda Grom, Honda CB650R all of them are reliable asf
@MotoJaceee8 ай бұрын
Yeah bro! I am a honda lover and loyal to the brand. Honda everything from lawnmower to bikes and cars lol they might not be the fastest cars and bikes out there but it sure is reliable and last forever.
@tahami41448 ай бұрын
@@MotoJaceee yes did you look at the new hornet 1000 its fucking sexxy mate
Пікірлер
What size is the drain plug washer?
sick type r and ep3 SI and cb. I aspire to be like this man one day
Just curious but are you a Honda fanboy???
Yes i am a honda fanboy
Thanks to your video I ordered one as well, but with a different muffler. I'll upload a few videos of the sound, it sounds amazing.
Your welcome! I have about 2200 miles on the exhaust and so far so good. No issues with the welds and it is holding up. Fyi, When you’re installing the header part, don’t tighten all the bolts until everything is aligned. And check for leaks on where the headers and engine block meets.
How to install tachometer ?
Don't need one, the sound of the engine is your tach
How many copper washers did you put with drain bolt?
Just one. I used the OEM honda crush washer 12mm.
Schön sauber , dein Motorrad 😊! Ich fahre mit der Cb 650R durch den Monsunregen Dschungel etc , und die Cb, sieht aus wie ein Baufahrzeug mit Satteltaschen 😊. Was interessiert Dreck?! Ich will Cb 650 R fahren 😊. Gruss u Danke . Thailand 1959.
ive had a better philly at geno’s
How do you like it long term? Looking at one for mine and was wondering after 8 months if you still like it
Hi there! so I have ridden the bike with the ebay special exhaust for about 2000 miles and so far I still like the sound. Is it loud? Yes... any aftermarket exhaust with a cat delete will be loud but I do miss the stock exhaust from time to time. I really got the exhaust for me to be heard by other cars/drivers who are usually not paying attention.
@@MotoJaceee I’ll do a little more research but this is the best looking exhaust I’ve found and from what I’ve heard it’s one of the better sounding for the price. Good to know it’s still enjoyable after that long. I got the bike back in December and have got 4000+ miles on it already but I’ve had more than a few instances of people not knowing I was around them
hi motoJACE did you tune your bike after your exhaust in stall.
Hi there! I did not tune the bike. It is running great even without a tune but it could free up more Hp/Tq if it is tuned. Rode the bike with the exhaust for 2k miles and no issues at this point.
Hey bud, thanks for the info. What length drain plug did you order, the link on Amazon has 3 options. Cheers
Hey bud! I ordered the M12 x 1.5. M12 is the size of the bolt and 1.5 is the thread pitch.
Gold Plug or nothing....
how's the wind at 80 mph? figured without a windscreen its hell?
Depends on the day. If there is a head wind then it is bad. If there is not it’s tolerable. Tucking in is your best bet.
I used a custom ixil exhaust before but the sound was obnoxiously loud i feel emberassed everytime at trafic lights, cold start in the morning, etc..maybe its just me, but ull get tired of loud exhaust pretty quick. But whatever makes u happy bros..just have to consider people around you.. 😅
Plan on getting 1 soon but that bracket look sketchy.
For the money, it’s surprisingly pretty good. The exhaust bracket?
Yeah @10:50. Real value for money, you can even put a legit slip on on that thing if you have extra cash.
Nice from CT same bike, its absolute joy man.
One of the best bikes of its class!
Nice
Вуха не боліли з таким вихлопом на довгу дистанцію ? )) А так ставлю лайк!
It does hurt but it is so good! Music to my ears!
Did you replace the copper header gaskets?
No, I used the original one and no leaks. The gasket had 600 miles on it
any updates??
Hey Buddy! So I put in about 1200 miles on the exhaust and it is still holding good. Still sounds good and no issues. I will update in a couple of months as riding season is just about to start here in the northeast
@@MotoJaceee awesome man i appreciate it!
Thank you for using (liters) when filling it with oil. Quarts is such a bad measurement.
well, that exhaust is tiring, I have to say..
What is the exhaust exactly? ...sounds great
It’s the eBay special. K.O. Lightning Exhaust. www.ebay.com/itm/204167902490?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dyrdlhfhrbo&sssrc=4429486&ssuid=zZ3l0KDwRxS&var=&widget_ver=artemis&media=COPY
I just installed the full system exhaust on my Honda cbr 650 but now there’s black liquid coming out from the headers how can I fix this ?
The black liquid is water/condensation which is normal just like in an automobile. It is water and carbon. I think it happens more when your bike is parked outside overnight.
What tank pads do you have, please? :)
www.amazon.com/dp/B07WVFR6PP/ref=cm_sw_r_as_gl_api_gl_i_P9MQ4J1QXFMDS7Q06SZ8?linkCode=ml2&tag=motojace-20 Tech Spec Tank Grips
What oil filter removal tool is that
Just a regular oil filter remover from auto store. I have the one that attaches to a ratchet. It is the adjustable one.
Did you use the copper washer like that bolt came with or steel like the books says to use?
I don’t use the copper washer but the oem crush washer which is aluminum
@@MotoJaceee I ended up biting the bullet and just ordering the correct pack on Amazon. Won’t be here until Sunday though sadly so bikes now out of commission. Thanks for the reply though. I was following a guide on the cb650r Reddit and the guy said they were steel washers which didn’t make sense
@@planb4life1234 the copper one would definitely work. As long as you change it every oil change, you should be ok with cooper or aluminum. The part number for the OEM crush washer is 94109-12000.
Nice bike man. I have the same 2023. Did yours come with a quick shifter installed already? I bought a knockoff one and it did not work, but I read that the 2023 and up required a specific one? Also, is yours lowered? I lowered mine using the t-rex racing lowering kit. Im 5'9" and needed about half inch to be able to flat foot it.
Thanks man! I bought the OEM quick shifter after purchasing the bike. The 2020-2022 works with the 2023. Plug and play. Mine is not lowered.
What are you using for the cleaning? That little spray can.
Green can? That’s a break cleaner to just get the oil off where it dripped
Ah, that makes sense :) Thank you! @@MotoJaceee
Man that's way too loud. The exhaust outlet is huge, like the size of a car. Oh well, to each their own.
I am curious as to what your first bike was. Nice video btw! Keep up the content! Do you do night rides?
Hi! My first bike was Grom but I don’t know if I should really consider that as a bike lol but for full size bike, it is the CB650R. I do some night rides but not too much. Thanks!
@@MotoJaceee It has two wheels brother it's a bike! Haha! You need some Grom content to round out your channel! Thx for hitting me back!
@@x_ghost_x6612 yes I do need some more Grom content! I gonna work on it! Thanks brother!
Hey MJ, how many miles on your HG and did you get your ECU reflashed after piping your ride up ?
Hey! I have about 1300 miles on it to date. I didn't flash it.
KM/H / MPH ?
MPH
Pwaaaaaah what a note jace❤from the UK
Hi, do u know if the bike need a remap after change the full exhaust ? I want to put one on my bike but I'm afraid to not cause the damage to the engine without remaping ...
Hi, I did not remap the bike after the exhaust and it runs fine. It would benefit the bike from a remap/tune to increase HP/TQ
Im waiting for mine to be delivered at the end of march, black edition 2024 model. I love your videos, please keep uploading!
can you still get them without E clutch ?
@@maxim913 Yep, they have 2 separated model. Or you can just turn E-Clutch off.
Mine is being delivered tomorrow. Blue Matte, cannot fucking wait. Ride safe.
nice I didn't realize the 2024 model had a black edition, I thought they were all 2023 and only 180 Mads
Hi mate, sounds nice! I've been thinking about getting one but I'm not sure on the longevity of it. I'm not expecting a top notch standard as it's only an ebay special but i dont want to have to replace it again after a few months. Hows it holding out for you?
Hey mate! So far it’s holding up good! I do not ride in the rain or snow often so the rusting part is kinda out of the equation. So far iv’e put 1k miles on it and it is holding up well. Only thing I noticed is that the silver color of the pipe turned into the same color as the wheels (bronze) which is cool because it blends well.
@@MotoJaceee thanks for the quick response. Ok awesome, sounds good to me!
@@shauntylerfree8263 your welcome! Please hit subscribe when you get a chance! Thank you
Hello from Ukraine. Very nice pov ride video. Love these New Jersey views!
Glad you like them! Thanks
Hey man! Just found your channel through one of your older Honda CB650R rides. Great quality content! I was wondering if you ever tried the Honda CB300R? I'm asking because I’m watching videos to find out about what should be the first bike I own. And even though I wouldn't mind starting on a 300cc bike, in this economy I feel like selling it would be nearly impossible in order to upgrade and there is only about 3k$ difference. I wonder what’s your opinion about getting a Honda CB650R as a first bike. Pricier for sure, but I don't want to buy another one in a year or two and it appears to me that the CB650R might be a good choice being a beginner and for long term ownership as well. And that in line 4 sound... I'm in love with it. It has amazing reviews, haven’t heard anything bad about it so far (maybe that it's not that snappy with the throttle but I'm not an agressive driver anyway) everyone who rides it loves it. Do you think it works well as a beginner bike for a responsible rider? I would use it for city and longer trips as well. Thank you in advance! Have a good one!
Hey bud! I haven’t ridden the CB300R. Technically, my CB650R is my second bike but it is my first full size bike. I bought a 23 Grom as my first bike back in June and 3 weeks later I purchased the CB650R. I love the Grom but I couldn’t take it to highways and needed something bigger. I initially was looking at the CB300 but I am glad I pulled the trigger on the CB650. No regrets! Love the bike all in all! I also knew I would wanted a 650 at one point so instead of having to upgrade the 300, I just went straight to it! It is powerful and snappy in my opinion but it is beginner friendly. Rode it for a 5 hour ride and it wasn’t bad. City Riding is also not bad. The only advantage of the CB300 is that it is lighter and easier to maneuver. If you really want comfort, I would look at the Rebel 300 or 500. Low seat height and more comfortable sitting position. Hope this helps and let me know what you ended up getting!
Hi Jace! love the ride! May I have your Go Pro setting, please?
Hey buddy! It’s a GoPro 11 Settings (4k, SuperView, 30 fps, Shutter 1/60, Iso 100, ND Filter, External Mic Zoom H1N)
My headers keep hitting the oil pan I notice that when I tighten it it wants to hit the oil pan
I had the same issue initially but I just re-aligned everything then tightened it and it gave me the OEM header clearance.
Maybe you should of partially filled the new oil filter before installing & torque according to Honda recommendations so you don’t over tighten
I don't torque the oil filter on anything. I always hand tight it and I've never had an issue on it coming loose. U can fill or not fill the filter before installing it also never had an issue when I don't pre fill it.
That sounds so damn good on the open road
next time try making your intro even louder :) but nice video
thanks for the feed back.. im working on the sound level lol
Do you have a video without db killer?
the pull on the end of the video has no db killer. I feel like it sounds better without it.
More like aftermartket sound, nice ride nonetheless.
How do you like the bike compare to other bikes you have riden?
To be honest, this is my 2nd bike and my first one is a Honda Grom. This is my first full size bike. I’ve tested a Honda Rebel 300 which was a softer more comfy ride. I like the way the CB rides. Definitely have a sports bike feel on it!
@MotoJaceee pretty much my intented path. This bike will be my first real bike after using a 125. Those are some lovely smooth rads
disturbing people👎
Boring straight lines and loud for nothing...
I think bro loves honda too much Honda Civic Type R, Honda Grom, Honda CB650R all of them are reliable asf
Yeah bro! I am a honda lover and loyal to the brand. Honda everything from lawnmower to bikes and cars lol they might not be the fastest cars and bikes out there but it sure is reliable and last forever.
@@MotoJaceee yes did you look at the new hornet 1000 its fucking sexxy mate