Пікірлер

• 
  @martiwf02 күн бұрын

  I am a bit disappointed that this video does not include changing the emergency brake pads.

• 
  @StevesBeyondRepair2 күн бұрын

  @@martiwf0 Hi. Mine didnt have any pads. It used two big brass dowels that captured the rotor to keep anything from moving when parked. In one of the 4 vids I think I mentioned it. Thanks for watching and commenting!👍

• 
  @butangviber4 күн бұрын

  I am assemblying my building at this moment and got hung up one the base angle. Thank the lord for you video!

• 
  @StevesBeyondRepair4 күн бұрын

  @@butangviber Oh man, that's great!! So glad it helped you!

• 
  @christineriley43715 күн бұрын

  I have the same exact trailer first thing I did was replace the Jack with a hydraulic Jack from Stillwell it cost 850.00 pretty easy to install worth it’s weight in gold

• 
  @StevesBeyondRepair5 күн бұрын

  @@christineriley4371 I think of that jack everytime I hook and unhook from my truck!!!🤣

• 
  @christineriley43714 күн бұрын

  @@StevesBeyondRepair when I bought my trailer the loading outriggers where included

• 
  @Malta23336 күн бұрын

  What a helpful video, Steve. Good job.

• 
  @joyceosborne41797 күн бұрын

  I don't know anything about welders or anything else in your shop, but I really enjoying your testing this Bestarc. Good job!

• 
  @tmack20907 күн бұрын

  Thanks for the video Steve 👍👍

• 
  @bparsons720078 күн бұрын

  Those 110 units hate 20amp breakers..... I have 2 110 units and have no problems when i use my dedicated 30 amp RV outlet using the 30amp to 20amp adapter for the plug. I can weld until the welders timeout for the cool down period. (Duty Cycle)

• 
  @StevesBeyondRepair7 күн бұрын

  Thanks for the comment. I'm going to look at max amp load on 12ga wire. i might could get away with tossing in a 30a breaker, it is a short dedicated single outlet... curious of the amp draw on this welder..i could test that.

• 
  @southtexashay7778 күн бұрын

  Great video Steve, is that a 220/110 look like its getting the job done. I thing 220 would be better if you can convert it. Vevor sent me a plasma cutter that I will be doing a review cutting well pipes for the farm gate. I wish I could get a heavier wire feed welder for welding the thick pipes.

• 
  @StevesBeyondRepair8 күн бұрын

  @@southtexashay777hey Luis, it's just a small 110v. But hey bestarc, I'll give your welder a workout!😁

• 
  @abdushakoorjamalmokalane171915 күн бұрын

  Great team work

• 
  @StevesBeyondRepair15 күн бұрын

  Kristina was a HUGE help!!

• 
  @kevinstockton31526 күн бұрын

  Thank you Steve ! You were clear and very easy to your follow directions.

• 
  @Malta2333Ай бұрын

  Not only works great…but looks great too! Good job.

• 
  @tmack2090Ай бұрын

  Thanks for the video Steve. Everything coming together nicely .

• 
  @StevesBeyondRepairАй бұрын

  Thank you!

• 
  @tmack2090Ай бұрын

  @@StevesBeyondRepair your welcome steve

• 
  @joyceosborne4179Ай бұрын

  That looks fantastic, Steve! You really did a good job. I couldn't help looking around and thinking about how YOU did all that by yourself! You're smart!

• 
  @fredosborne6342Ай бұрын

  Beautiful!! So professional. Great job!

• 
  @WaynesAdventureАй бұрын

  Great trailer and video

• 
  @paulacraig8252Ай бұрын

  Not very DIY😑

• 
  @StevesBeyondRepairАй бұрын

  Yeah...gotta have few tools..

• 
  @S650HeroАй бұрын

  Great video, just sold my 7x12 2015 load trail to up grade to a bigger 7x16 Lamar and I like it! Your video helped me feel good about my purchase lol I almost got a horizon brand or a raw maxx from same dealer but the hardware and build looked much cheaper and price wasn’t much more for the Lamar, with rebates I only paid 12500 no spare though, but mine came with back drop legs like you want idk why yours didn’t

• 
  @StevesBeyondRepairАй бұрын

  I love this trailer! I too was a bit disappointed that no drop legs were standard. Still need to build some. Thank you for clicking on this and especially for taking the time to leave me a nice comment. 👍

• 
  @go5582Ай бұрын

  hi could you give us a estimate on how much the business would have charged you for the transportation of the rocks? thanks

• 
  @StevesBeyondRepairАй бұрын

  Yes. Those 5 loads, about 20 tons, would have been around $800 delivered.

• 
  @Cameraflyer-Ай бұрын

  The wind ruined most of the video.

• 
  @StevesBeyondRepairАй бұрын

  You are not wrong. Even had wind sock on mic. On the Plus side, ac has been working great!

• 
  @DadandBellaАй бұрын

  A normal septic company will pump this without issue?

• 
  @StevesBeyondRepairАй бұрын

  Not sure. Hopefully with just me, and plenty of additives to help the solids dissolve, it will push out to lateral, clean gray water.

• 
  @greggarrot8132Ай бұрын

  If you store your PVC glue upside down it lasts way longer

• 
  @StevesBeyondRepairАй бұрын

  Great tip!

• 
  @remotecontrolfarmerАй бұрын

  I used 2 1000l flow bins for mine.

• 
  @stevemitz4740Ай бұрын

  My cheep commie dual fuel carb had 5 vacuum leaks on the regulator, found be removing the outlet tube, blowing pressure by mouth & spraying soap & looking for bubbles! Coasting many hours to fix! Fixing all the leaks on my new carb made it work!

• 
  @jamietaylor7258Ай бұрын

  and by thye way im in Spain

• 
  @jamietaylor7258Ай бұрын

  great job good reuild im in the process of a 773 rebuild that got completely burnt out

• 
  @garyeager64602 ай бұрын

  I could use the specs on cylinder you used , thanks and great video .

• 
  @StevesBeyondRepair2 ай бұрын

  this is the one i used. a.co/d/iy7Z4Be The only thing i would change is to use 3/8 hose instead of 1/2 inch. and also i would have made the grapple diameter a bit smaller. Good luck 👍

• 
  @joejones27222 ай бұрын

  Can anyone show me how to put a belt on an ES2252B2 zero turn

• 
  @joyceosborne41792 ай бұрын

  I can't believe how complicated all that is! Can't fathom how you can figure it all out. Amazing to me on so many different levels. Keep up the superb work. Glad you post!

• 
  @fredosborne63422 ай бұрын

  Wow! Those water connections are complex! Great work!

• 
  @Ozzie-yw3fb2 ай бұрын

  Great job Steve!!

• 
  @firstname62082 ай бұрын

  If that jad a telescope cylinder i would be all over it. Otherwise nice trailer.i would have put an air guage in the back bumper so you can always verify how much air in the bags. Should never be at zero. The bags will not last . Thanks for the vid.

• 
  @monsteryfz4502 ай бұрын

  You really need a pressure regulator for your RV if you don’t have one. It will blow the faucets apart if it’s not regulated. I know from experience!😂

• 
  @StevesBeyondRepair2 ай бұрын

  Good idea. Was thinkin the same, so many different types out there.

• 
  @monsteryfz4502 ай бұрын

  Mine just has a big chunk of square metal in a round pipe to restrict it

• 
  @daveseaver63372 ай бұрын

  Ironbull is junk paint will fall of and be rust bucket in two years. know eight people that have them every one paint falls off metal just bubbles up and falls off.

• 
  @michaelbellocchio13 ай бұрын

  Great video, you take your time a it make it easy to follow, thank you!

• 
  @dalejones21083 ай бұрын

  Did you use high pressure regulator or lo

• 
  @StevesBeyondRepair3 ай бұрын

  It was low, this setup was okay at best, and could never get it to work with natural gas, even messing with orifice. Went ahead and ran gas in it. Night and day. It did work with propane, used it a bunch to weld at property, not nearly as easy to start as gas.

• 
  @dalejones21083 ай бұрын

  @@StevesBeyondRepair did you try it on propane?

• 
  @StevesBeyondRepair3 ай бұрын

  @@dalejones2108 yes, in that vid I tested welder with propane, made a gate/fence video using propane to use it to weld with. Worked okay.👍

• 
  @fredosborne63423 ай бұрын

  Sad to hear of the overflow from the 100-gallon fresh-water tank and the P-trap leaking. You are doing amazing work on that trailer and barn! So many things to do!!!

• 
  @southtexashay7773 ай бұрын

  Man, that trailer sure has a bunch of water lines. Have a great week Steve.

• 
  @Malta23333 ай бұрын

  That would be my least favorite job, but you’re getting it done.

• 
  @joyceosborne41793 ай бұрын

  Well, this is really a challenge, isn't it? But you'll get that water problem figured out, and it'll be hunky-dory. You certainly know what to buy to fix whatever needs fixing! You're amazing!

• 
  @erwickline3 ай бұрын

  I am very thankful to you for these video's.. about 3 years ago I restored mine but I have to sort the chain case now.. chains/seals/bearings/oil etc.. looking forward to it O.o Going to have to build some tools it looks! Thank you for the cheat codes!

• 
  @Malta23333 ай бұрын

  That was a job! I’m exhausted, but am awed how you can do so many different things. Good work, Steve.

• 
  @fredosborne63423 ай бұрын

  I love how you move the camera around to focus on your work area! That seems like a real pain to keep doing, but it really is effective. So glad your water is not smelling.

• 
  @southtexashay7773 ай бұрын

  Nice job Steve, looks like it's progressing nicely. Have a great week my friend.

• 
  @StevesBeyondRepair3 ай бұрын

  Thank you Luis! you too my friend!

• 
  @joyceosborne41793 ай бұрын

  Well, my goodness! You know how to do so many different things. I love watching you work. Takes many tools to do all that! It's looking amazing out there, and it'll soon be done!

• 
  @rusosure73 ай бұрын

  If a guy got nervous about the drain field, he could put an aerator in the 2nd or 3rd barrel.

• 
  @tmacs3113 ай бұрын

  Thanks for sharing videos Steve 👍👍

• 
  @stevewoods59303 ай бұрын

  Hi Steve we are having the same problem as this but on a Donkey forklift with a kubota D1105 engine, hoping this has shone a light on what we need to look for, as you said couldnt find anything on the net related to this problem until now, so thanks for the vid and info

• 
  @StevesBeyondRepair3 ай бұрын

  That certainly could have the same solenoid setup. But if I remember right when I was knee deep in that kubota, there were a couple of wiring designs kubota used specifically on their equipment. I would think the forklift company would design that control as simple as possible.

• 
  @waynecook22213 ай бұрын

  Man u did a awesome job. My girl and myself would like to know WHERE we can use this design, Land wise????

• 
  @StevesBeyondRepair3 ай бұрын

  I dont ever think an in town city would ever let you do this unless you paid 5 different trades to layout, design, get design approval, perk test, and several permits. From a handful of comments here, j should be locked up. Maybe I should have dug a deep hole, built an outhouse over it, and pooped right in the dirt! 🤣😉

• 
  @scottwall46693 ай бұрын

  Rename video. "How to build a backyard disaster" or "Come smell Steves Shit" or "How to get code enforcement on your ass for smelling up city with faulty designed illegal system"

• 
  @scottwall46693 ай бұрын

  Please do not build a system like this!!! He lined the leach field with plastic????Then rock??? Backwards!! That was 5 tons of shit smelling mistake!!!! Steve wants to save his shit water for future generations?? It cannot sink into the ground!!!! He should have had rock on bottom and then a barrier to keep dirt from turning rock to cement. Like half cut barrels. Too much glue, none needed of the RV hook up side.... If I was banging the old lady or an earth quake that line will fracture!! It is gravity, not pressure.