Sehr schnelle RC Rennboote.
Alle Rigger sind Eigenbau.
Boote sind für den "Just for Fun" Bereich sowie "SAW" aufgebaut.
Gerne dürft ihr die Videos verlinken oder weiterleiten.
Auch über jeden Abonnenten würde ich mich freuen.
Very fast RC Boats.
All Riggers are self-made.
Boats are built for the "Just for fun" area as well as "SAW" competitions.
You are welcome to link or forward the videos.
I would also be happy about every subscriber.
Пікірлер
Krasses Teil! Bin grad neu im Hobby und sehr angetan!
Hier handelt es sich auch um die Speerspitze des Hobbys. Bei SAW Veranstaltungen geht es nur darum so schnell wie möglich geradeaus über 100 m zu fahren.
Absolutely awesome speed and the fact that it didn't disintegrate from air friction is amazing!!
I've seen alot of fast boats, but that is the fastest I've ever seen!!
Alter Verwalter, der Titel war ja mal zutreffend
Ce type d'hydro est apparemment moins concerné par les problèmes d'anti couple que ceux a moteurs thermiques...! Et ils semblent plus facile a piloter ....? Bravo
Les hydros y'a 10 ou 15.ans je préfère Engines thermiques... odeur. Méthanol ricin nitrométhane.... Et bruit IS ...GOOD ..... ❤️ Mais électrique très impressionnant..... Thank you
L'électrique est aussi très cher ! Mais lorsqu'il s'agit de vitesse, les véhicules à combustion n'arrivent plus à suivre.
Guten Tag. Darf ich fragen, ob das Boot zum Verkauf steht?
Das Boot gehört mir nicht. Das letzte was ich weiss, soll es Verkauft werden. Der Besitzer betreibt den YT Kanal HPR fast Boats . Versuche ihn mal zu kontaktieren, er schaut aberfast gar nicht mehr nach dem Kanal. Vielleicht hat er ja eine E-Mail Adresse hinterlegt.
My rasshole 😮
Set up my friend??
I don't know what was installed in this boat. The owner did not provide me with any information.
Fährt sich richtig geil! Ich habe vor, demnächst auch mal meinen eigenen Rigger zu bauen. Hast Du mir evtl. ein paar Tipps? Ride Pad-Winkel der Schwimmer etc. Hab bisher sehr wenig Ahnung in Sachen Outrigger, ausser nen Shrimp Rigger zusammengebaut aus China. 🙂
Hallo Martin, das beste ist wenn du dich in einem Forum anmeldest, re-rennboote.de . Es gibt da sehr viele unterschiedliche Möglichkeiten was die Ausführung angeht. Ich bin sogar bei meinem letztem Rigger 0° Winkel mit halbrunder Abrisskante gefahren. Ich hatte damals sehr viel experimentiert, leider mache ich aus Gesundheitlichen gründen die letzten 10 Jahre nichts mehr. Ich habe hier auch ein paar Bilder unter Bauberichte von diesem Rigger.
That was awesome.
What ever happened with this , is it on a wall ?
I have not been active for quite some time ( health ). But I still have all my boats ready for use in the cellar.
@@fast-rc-boats all the best with the health, i was inspired to get one made from the speed of the boat you made , any pointers for making it crazy fast ?
@@radioactive4388 It's an advantage if you know people with the same interests. With my boats, I also made each optimization individually and then tested it on the water, so you can see very well whether it is going in the right direction.
Hallo, wo fahrt ihr ?
Hallo, ich fahre aus Gesundheitlichen gründen schon lange nicht mehr. Früher war das als in Hanau-Steinheim oder Floßhafen Aschaffenburg bzw. Mainz.
Extremely impressive, bravo. This is actual engineering at this point, everything is custom built just for this purpose. I admire it so much. I don't understand all the comments, peope are dumb and jealous at the same time. Cheers!
I can't understand it either. Jörg is well-known in the SAW scene, and these people only celebrate him. He has held the absolute world record with his outriggers for tens of years. Sorry translator 😅
Wowo
Farouk
A lot of human speedometers in the comment section
Unfortunately it has to be a smooth brain sloped head simpleton who makes the first comment.
hello please setup?
Just watch the video from the beginning. It contains all the information about the setup. The boat is twin-engine (take everything x2).
Das kleine rote Boot ist König
How much KV of motor you have used
Leopard 3665 with 3930 kv / 4S1P 5000 / 40C / Esc from MBP with 200A / Prop self made 45er 2 blade with 1,8 pitch
Hi impressive....this is all stock?
Hello, i have no infos from this Mono boat. But I believe that this is a self-built. Almost all the boats that compete at the SAW competition in Munich are homebuilt.
manque de pêche no speed
Very cool
I don't think that can be fixed? 😢
That is correct. ( R.I.P )
Nice 👍
Какой вес лодки со всеми комплектующими?
Das weiß ich nicht mehr.
Bro your. Rc boat. Total weight
around 2 kg
Круто
Respekt .krasses rc rennboot 😮cool
Where did you buy this hull ?
Self made from Volly. Most of the boats are homebuilt or heavily modified.
Fantastic video 👏👌♥️
Would like to know the exact model and length of that Miss Geico hull ?❤
I suspect that it is a MHZ Mystic in 185 cm.
Looked like about 100km/hr max
lolz, really
Ne Digga das deutlich schneller
watch other videos about RC boats going at 150km/h or so with installed GPS and don't say bullshit again
Would like to know prop,motor and batt specs...thinking rpms are 40 to 50k range
Check out the other videos of this 8S1P rigger. In one video I wrote all the data and info under "comments".
The 40 -50k rpm range is not high enough for this boat. I'm running electric - driven outrigger boats for oval - racing - use for years at this rpm level. This boat runs at a significant higher rpm level. You could hear the difference. I think the Jörg - Mrkwitschka - outrigger needs around 70k rpm for its maximum speed. LMT motors offer custom - made versions with a titanium ring around the rotor ( rpm limit 100k ... not only 65k ). J. Mrkwitschka' s battery is extraordinary powerful for its size. I never heard how powerful his battery really is. But remembering data from former record attempts... with lower power level on board ... I think his battery is able to bring out 22 or 23 kW peak. In my opinion... not bad for a battery pack weighing not much more than 1100 gr. 😉.
@@dirkstaudt4341 Hallo Dirk, ich habe ein Video mit sämtlichen Daten und Hardware angaben von Jörg seinem ersten SAW im Jahre 2016 mit diesem Boot. Damals drehte der Motor schon ausbeschläunigt 63900 rpm. Bei kleinen Sprüngen stiegt die Drehzahl auf 70.000 rpm an. Ich habe schon so viele Fragen zu diesem Boot bekommen und das obwohl ich im ersten Video schon alles dazu geschrieben hatte. Leider liest anscheinen heutzutage keiner mehr was. kzread.info/dash/bejne/eKZrppuYhpe7itY.html Im laufe der Jahre wurden nur kleiner Änderungen daran vorgenommen.
Can you recommend somewhere where I can buy a similar boat
Unfortunately, I am no longer up to date. Such riggers have never been available for purchase. Hydro & Marine has also sold as riggers where were designed for 5 minute setups in the oval. But ours are SAW riggers where only 2x100 meters have to be run at maximum speed.
Where can I buy a boat like that?
I do not know where you could buy such riggers. These are homebuilt rigs that are designed for such high speeds.
Where can I buy a boat like that?
I have already answered you under the other video. Such high speed riggers as we drive them are all self-built and not for sale.
Whe can buy flex shaft same you rc boat
Everything is homemade. It is also 2 mm spring steel.
What is spring steel sir give idea hepl me send me picture shaft at coupling. sir you have messenger
Yes everythting. Look her: Part 1 kzread.info/dash/bejne/qnmayqmPfNy7ppM.html Part 2 kzread.info/dash/bejne/aKqKwaiCYaSXe6Q.html
@@buhayofwsaitaly7051 Just look on the internet ( google / Wikipedia ).
What spring steel sir ? Piano wire same ?
Ich mag RC-Boote sehr, besonders Twin-Boote, besonders wenn ich sie selbst baue. Ich möchte selbst einen Twin-Rigger bauen. Mir ist aufgefallen, dass das im Video gezeigte Boot keine einstellbaren Fahrer hat. Meine Frage, wenn Sie mir erlauben, wie Sie einstellen der Winkel für ein genaues Verhalten
Die Balsoholz Rigger wo wir früher als gebaut haben gingen nicht einzustellen. Wir haben die Heckauflastung für das Hoppeln alles über den Schwerpunkt eingestellt. Einfach den Lipo dementsprechend verschoben. Das starre Stevenrohr wurde so flach wie möglich verbaut, der Winkel betrug immer so 1 biss 3° negativ. Das funktionierte durch die extreme Erfahrung wo wir mit diesen Riggern hatten sehr gut. Ansonsten einfach 2 verstellbare Strut`s verbauen. Diese kann man dann ja in der Höhe wie im Winkel einstellen.
@@fast-rc-boats vielen Dank für die Antwort, vielleicht eröffne ich ein Bauthema im Forum, es ist noch eine Idee, jetzt sammle ich so viele Informationen wie möglich und versuche, mich von Bildern und Videos auf KZread inspirieren zu lassen
Run only on prop and fins if she have one,super slow motione
No fin. SAW test run.
272 feet per second...😲 Astonishing!
Xem kênh của bạn 4 năm rồi mà chưa biết bạn ở nước nào
Germany / Deutschland
Bạn ở nước nào
ĐứcBayern
Guten Tag, ich habe auch ein RC Modellboot. Ca. 100 km/h schafft das gute stück. Ich wollte mal fragen was die perfekt Wassertemperatur ist um Modellboote fahren zu lassen. Ist es besser wenn das Wetter wie jetzt ist also unter 0°, da da ja deine besser Kühlung für das Boot vorhanden ist und ich eh Probleme mit der Temperatur habe.
Ich bin im Winter wie im Sommer mit meinen Booten immer unterwegs gewesen. Ich würde erst mal dein Temperatur Problem abstellen, das ist immer ein Zeichen das das Setup zu viel Strom zieht. Wenn du im Winter oder bei kühleren Zeiten fährst ist es auf jedenfalls sinnvoll die Lipos auf 40° Temperatur vor zuheizen. Die geben dann mehr Leistung ab und erhitzen sich auch nicht so extrem wie als wenn sie kalt benutzt werden.
Prop mm?
I have no information about this. But I know that the propellers are self-cast.
@@fast-rc-boats thanks!!!
So far there are only 2 people in the world who manage to drive over 300 km/h. Jörg and Arne are a joint project. Everything was self-built, calculated and developed. Take a look at the first video of Jörg with his 8S rigger, there I gave a very precise setup and logs are under "Description".
So far there are only 2 people in the world who manage to drive over 300 km/h. Jörg and Arne are a joint project. Everything was self-built, calculated and developed. Take a look at the first video of Jörg with his 8S rigger, there I gave a very precise setup and logs are under "Description".
So far there are only 2 people in the world who manage to drive over 300 km/h. Jörg and Arne are a joint project. Everything was self-built, calculated and developed. Take a look at the first video of Jörg with his 8S rigger, there I gave a very precise setup and logs are under "Description".
So far there are only 2 people in the world who manage to drive over 300 km/h. Jörg and Arne are a joint project. Everything was self-built, calculated and developed. Take a look at the first video of Jörg with his 8S rigger, there I gave a very precise setup and logs are under "Description".
Very cool!