It would be alot better if u worked .ore and less talking
@robertleski330712 күн бұрын
Your casting deck came out pretty good, now if you notch out a 2x4 and go down to center of the boat from the back seat to the front seat. Then check and see the side ribs are higher than the center that's the key to it. You may have to trim the center a bit.. Now mark the center of the seats and the center of the plywood, once it all fits and the side are a little higher then you mark each rib on both sides and take a half round course rasp and rasp them at the angle until they all fit . You will have a deep V that is just as stable as any Bass boats, I did the same thing to a 1976 mirror craft deepV and it was unbelievable how stable it was and you could not tip it like you can a regular deep V good luck and keep up with your fishing stuff and boat improvements
@marcoflores518121 күн бұрын
I just came across your channel, sweet build! I just bought a deep V hull myself and I'm thinking of adding a deck to it also
@its_tyrone411624 күн бұрын
Fishing in my spot without me is wild
@its_tyrone411624 күн бұрын
Motor runs good now
@user-kj1pm5jk4zАй бұрын
hey you should screw the board to the frame before you put it in there ! 🤣
@jacobanderson16682 ай бұрын
You should add an intro to ur videos
@user-io5wu9vi6d2 ай бұрын
favorite fisherman🫡
@Holycream2 ай бұрын
Beautiful kisser to💀
@TaylorDrzonek2 ай бұрын
Looking Good!
@thomasmorrissey3652 ай бұрын
Make sure the pressure treated wood is not in contact with aluminum. The copper in treated lumber will react strongly with aluminum causing corrosion.
@carlitodidthat2 ай бұрын
Love this build bro im going to follow your video n do the same to my 13ft
@carlitodidthat2 ай бұрын
U skipped day 4 i think lol
@user-kj1pm5jk4zАй бұрын
This is day 4
@scottbostic62472 ай бұрын
Cool. I see one piece of treated. Why wouldn't you purchase all treated? Pretty good ideas considering you are young and doing this alone. Also please, no such word as cutted. I believe cut is past and present , singular and plural. Not a school teacher but video seem to be taken more seriously if it is spoken correctly .
@wesleyfishing86102 ай бұрын
When I was doing research before I started the project, the majority of people I watched recommended using non treated and sealing it yourself with either paint or epoxy, depending on your budget.
@hugobruen3 ай бұрын
*promo sm*
@melvinrawlings14573 ай бұрын
Good job buddy. Keep up the great content. Looking forward to more videos of the build. Much love to ya from Maryland❤❤❤.
@user-vj5mw3gs1d3 ай бұрын
Love this one!
@schl86754 ай бұрын
Coming along nice, good work.
@allkindsofoutdooractivities4 ай бұрын
Really nice. Good luck!
@jacobkile54664 ай бұрын
Get out there with the boat
@EnyahSs4 ай бұрын
So trash season has started?
@user-io5wu9vi6d4 ай бұрын
great fish!!!
@JonathanAlva3336 ай бұрын
Great video!!! Thanks for the great review on the powell diesel heavy rod might go buy one.
@user-vj5mw3gs1d6 ай бұрын
Love the VID!
@user-ik5xe2cm7q6 ай бұрын
nice!!!
@user-io5wu9vi6d6 ай бұрын
thanks for the insight
@user-vl8td8ip7h6 ай бұрын
thanks for the great info, might have to get me one for myself
@ManOfSteel-uc8gc Жыл бұрын
Show us the cake
@ManOfSteel-uc8gc Жыл бұрын
Yes daddy
@tinyguy0514 Жыл бұрын
nice rod big boy ;)
@jacobanderson1668 Жыл бұрын
W sunglasses
@jacobanderson1668 Жыл бұрын
Bros voice is a L
@jacobanderson1668 Жыл бұрын
His mom is his only true subscriber
@kadynwhite2202 жыл бұрын
I’m ur biggest fan
@crazyz-gaming63213 жыл бұрын
Nice vid keep up the good work bro
@ashtynw1405 жыл бұрын
Niceee
@TheFisher6 жыл бұрын
Nice video brother! Sub #10 from me! Check me out when you get a chance, i am also a Wisconsin fisher :)
@jacksonsadoski55396 жыл бұрын
Can you make video on outdoors or fishing that is like 6-10 minuets long
Пікірлер
It would be alot better if u worked .ore and less talking
Your casting deck came out pretty good, now if you notch out a 2x4 and go down to center of the boat from the back seat to the front seat. Then check and see the side ribs are higher than the center that's the key to it. You may have to trim the center a bit.. Now mark the center of the seats and the center of the plywood, once it all fits and the side are a little higher then you mark each rib on both sides and take a half round course rasp and rasp them at the angle until they all fit . You will have a deep V that is just as stable as any Bass boats, I did the same thing to a 1976 mirror craft deepV and it was unbelievable how stable it was and you could not tip it like you can a regular deep V good luck and keep up with your fishing stuff and boat improvements
I just came across your channel, sweet build! I just bought a deep V hull myself and I'm thinking of adding a deck to it also
Fishing in my spot without me is wild
Motor runs good now
hey you should screw the board to the frame before you put it in there ! 🤣
You should add an intro to ur videos
favorite fisherman🫡
Beautiful kisser to💀
Looking Good!
Make sure the pressure treated wood is not in contact with aluminum. The copper in treated lumber will react strongly with aluminum causing corrosion.
Love this build bro im going to follow your video n do the same to my 13ft
U skipped day 4 i think lol
This is day 4
Cool. I see one piece of treated. Why wouldn't you purchase all treated? Pretty good ideas considering you are young and doing this alone. Also please, no such word as cutted. I believe cut is past and present , singular and plural. Not a school teacher but video seem to be taken more seriously if it is spoken correctly .
When I was doing research before I started the project, the majority of people I watched recommended using non treated and sealing it yourself with either paint or epoxy, depending on your budget.
*promo sm*
Good job buddy. Keep up the great content. Looking forward to more videos of the build. Much love to ya from Maryland❤❤❤.
Love this one!
Coming along nice, good work.
Really nice. Good luck!
Get out there with the boat
So trash season has started?
great fish!!!
Great video!!! Thanks for the great review on the powell diesel heavy rod might go buy one.
Love the VID!
nice!!!
thanks for the insight
thanks for the great info, might have to get me one for myself
Show us the cake
Yes daddy
nice rod big boy ;)
W sunglasses
Bros voice is a L
His mom is his only true subscriber
I’m ur biggest fan
Nice vid keep up the good work bro
Niceee
Nice video brother! Sub #10 from me! Check me out when you get a chance, i am also a Wisconsin fisher :)
Can you make video on outdoors or fishing that is like 6-10 minuets long
Yeah