Пікірлер

• 
  @anasmahmoud54282 сағат бұрын

  why the model have to be naked ? it will be more appropriate with only the wanted area exposed

• 
  @wade70609 сағат бұрын

  Thanks, I managed to get a bit of practice removing a couple off parts cars at the wrecking lot. Afterwards, I did it to my car, had a bit of a hard time getting the sensor in, but I actually managed to secure the wire back on using my hands since I have skinny fingers haha. Hopefully the used one from the wrecker lasts! Thanks saved me a bunch of money at the mechanic.

• 
  @davidtorres380311 сағат бұрын

  Perfect video man thank u

• 
  @JessieHodges-r4f4 күн бұрын

  Thanks Great demo video step by step

• 
  @balaofcanada2 күн бұрын

  You are welcome!

• 
  @MichaelJP4 күн бұрын

  Mine's been playing up for about 3 weeks, smart diagnosis kept reporting no errors. I just checked the door and although I can't see light inside the drum, I did notice some movement. So I ran a diagnosis again and it's saying the door's not closed properly....are you a telepathic Dryer Whisperer? 😂 Hopefully hear from customer service early next week but at least now I can point them in some direction. 👍

• 
  @balaofcanada2 күн бұрын

  Hahaha.......glad to hear

• 
  @hectorramos47734 күн бұрын

  Can you tell me where they sell the sensor spacer?

• 
  @balaofcanada2 күн бұрын

  I got it from Amazon

• 
  @hectorramos4773Күн бұрын

  @balaofcanada and since I look for it on Amazon, what name should I put?

• 
  @sonyyoung10367 күн бұрын

  Well done. Thanks for the tips too.

• 
  @blazeaglory10 күн бұрын

  Just fyi, Honda's are designed to be worked on from underneath.

• 
  @balaofcanada10 күн бұрын

  @blazeaglory 100% agree, but we need to find creative ways to troubleshoot when you don't have the ability to lift the car to work underneath

• 
  @staceymortoncoto796011 күн бұрын

  Knock sensor 2004 Honda pilot

• 
  @jvieira571912 күн бұрын

  Hi where do you get the bushings and want size/product # would it be.

• 
  @takecare617812 күн бұрын

  Thanks for your sharing❤

• 
  @user-tw5px4xp8c13 күн бұрын

  Sir please my question is, what causes someone to stammer, and what is the cure?

• 
  @user-tw5px4xp8c13 күн бұрын

  I imagine who created this heart, now I can understand how my heart works, I will mind what I take in, especially to the lungs. But I would like you to make a video explaining how a bad smelling environment can affect the heart... if it does affect it. Thank you sir for taking your time to make this video, I will always keep in touch with your channel to learn more about how my body functions 🙏

• 
  @alanrichardson917519 күн бұрын

  If you have a code? Put in a new sensor! WTF?

• 
  @alanrichardson917519 күн бұрын

  After 400,000 K you changed it?

• 
  @alanpachecoosuna327719 күн бұрын

  Does anyone know the severity of this issue. I scanned my car and it said to change the sensor as soon as possible if I had driving issues. That it could damage the main system.

• 
  @blazeaglory10 күн бұрын

  Low. If anything does start knocking, you can usually hear it

• 
  @dazergurl23 күн бұрын

  How do you know if you need the one with oil charge or regular R-134a?

• 
  @mellissabeckwith876323 күн бұрын

  Thank you for the information.

• 
  @BB-zi7di25 күн бұрын

  You are smart, man. Very helpful. Thank you!!! 🙌🏻

• 
  @balaofcanada25 күн бұрын

  @@BB-zi7di glad you found the video helpful.

• 
  @jamesrivtАй бұрын

  video starts @2:05

• 
  @elizabethwoolnough4358Ай бұрын

  Mine is brand new - just tried to use it for the first time. The battery is fully charged but the mower turned over once and then stopped and won't restart. I wish I hadn't bought it. 😢

• 
  @balaofcanadaАй бұрын

  Video to show how to shampoo the inside of your car like a pro.

• 
  @roosterjones4247Ай бұрын

  My 96 Camry calls for 32 ft lb. Tried to install a Beck/Arnley and the tip broke. (Pot metal made in China) Ordered an OEM, and hoping for better luck.

• 
  @balaofcanadaАй бұрын

  Goodluck

• 
  @arturos.l.2248Ай бұрын

  INTAKE MANIFOLD. ITS MADE OF METAL. HOSES ARENT MADE OF METAL.

• 
  @nasrinarabegum63492 ай бұрын

  The simplest explanation I have ever seen in internet.... thank you so much sir🙏

• 
  @balaofcanada2 ай бұрын

  Appreciate your feedback

• 
  @realfantasy32182 ай бұрын

  How often do u press it and for how long u press it for ??

• 
  @balaofcanada2 ай бұрын

  You have to press it every 15 seconds and then give it a gentle shake and press again . You have press until you reach the correct pressure as per needle indicator. .

• 
  @stubberific2 ай бұрын

  Great video. Really helpful and well explained

• 
  @balaofcanada2 ай бұрын

  Thanks for your feedback

• 
  @andrewvillavicencio84962 ай бұрын

  Thank you

• 
  @balaofcanada2 ай бұрын

  Thank you for your feedback

• 
  @benjaminduliguez54202 ай бұрын

  Two types..of sensor ..its single pin and twu pin..for instance two wires cut or eat the rat.. how to know to correct connection pin.

• 
  @bp70832 ай бұрын

  I was about to start on the repair but i have a 2006 and it has a platic piece below the intake manifold, making it impossible to see the knock sensor, looks like i have to remove the im.😢

• 
  @balaofcanada2 ай бұрын

  That sucks.....any way....removing manifold is not too difficult, see my other video regarding changing starter motor....I had shown how to remove intake. Make sure to get a new gasket.

• 
  @coveeclown93972 ай бұрын

  did this work ? is it still working?

• 
  @balaofcanada2 ай бұрын

  Yes. 1 year now. Still works and blows cold air.

• 
  @aarontapatio22572 ай бұрын

  That thing looks like shit😂

• 
  @balaofcanada2 ай бұрын

  That's right.....20 year old shit 😀

• 
  @howtodoitdude16622 ай бұрын

  So you had an engine code that you knock sensor was bad, but when you tested it, it showed that it was good, so your problem was not your knock sensor.

• 
  @balaofcanada2 ай бұрын

  Even though it test OK, but it was throwing g the code as it's worn out.

• 
  @jsmadray2 ай бұрын

  Tons of extra talking that just lengthens this video for no reason.

• 
  @balaofcanada2 ай бұрын

  Yup.....I agree. 🙂

• 
  @jogmas122 ай бұрын

  Thank you my friend. Another diy video on the accord. How is the recharge working so far? I have a 2004 accord

• 
  @balaofcanada2 ай бұрын

  Working great

• 
  @howtodoitdude16622 ай бұрын

  So you can reach in to plug the connector, but need a needle nose and a hose for the other steps?

• 
  @balaofcanada2 ай бұрын

  100% you need a long nose plier.

• 
  @ItchyKneeSon3 ай бұрын

  The duct tape is hilarious. If anything, use masking or painters tape so your tools don't have sticky residue afterwards. Alternatively, you could use a stick magnet to retrieve the sensor if it falls out of the socket. When reinstalling (any threaded part), turn it counter-clockwise first until you hear/feel it *click*. Then, turn clockwise to tighten. There's only one 'entrance' on the threads of a machined screw/bolt. When you hear/feel the *click*, you've found it. Make sure the screw is straight, though!

• 
  @ItchyKneeSon3 ай бұрын

  You can even turn it counter-clockwise a number of times to make sure it's THE click before you start tightening.

• 
  @fernandomartins98163 ай бұрын

  Well done 👏🏽👏🏽👏🏽 thanks

• 
  @SuperMetalFiend3 ай бұрын

  I have changed this sensor, TWICE! the code comes and goes every few days. I thought the cat was bad, but I guess I will try this next.

• 
  @balaofcanada3 ай бұрын

  Just a small tip. I finally figured out that any other after .market O2 sensor you change , the ECU is super sensitive and will keep throwing the P0139 code. Just get the original O2 sensor from Honda and see the magic.

• 
  @SuperMetalFiend3 ай бұрын

  @@balaofcanada I got the Denso, does Honda make one?

• 
  @balaofcanada3 ай бұрын

  @SuperMetalFiend Yes Honda have their original genuine part

• 
  @nacholesarri93522 ай бұрын

  @@SuperMetalFiendjust did the same thing let me know what you figure out I used denso sensor as well. 02 sensor only 07 accord lx i4

• 
  @msjimmied3 ай бұрын

  I don't know what you call it, but it's the part where the latch is to the hood. The part you dangerously use as a shelf for your tools. .You can take off the nuts etc, and pop those couple of tac point. You can then lift and push back that back. it will give you about two inches more of room to get your arm in there and get it done easier. Otherwise, it's a bear.

• 
  @charlieallan6584 ай бұрын

  Do NOT use an aftermarket Knock Sensor - Use Honda OEM, even if you have to pull it from a yard. The aftermarket (I used a Delphi) ones do not clear the engine code!!!

• 
  @balaofcanada4 ай бұрын

  I totally agree. Most Honda OEM parts are designed to be super sensitive for accurate readings. Aftermarket ones can keep throwing codes.

• 
  @torontoguy80434 ай бұрын

  thank you for this video. where did you buy the starter from? I'm also in Ontario(toronto)

• 
  @balaofcanada4 ай бұрын

  I purchased from Amazon.

• 
  @stevelutwyche5 ай бұрын

  Great idea with the hose/tape to assist the install. I’ve got to do this job at the weekend, thanks for the tip.

• 
  @balaofcanada5 ай бұрын

  All the best. With patience and the right tools....anything is possible 😀

• 
  @tallgoose91785 ай бұрын

  Thx i jus rolled my ankle playing basketball and this was helpful

• 
  @balaofcanada5 ай бұрын

  So glad it helped.

• 
  @balaofcanada5 ай бұрын

  Also. Ice for 2 days.

• 
  @SarojKabir-bv7to5 ай бұрын

  Thanks

• 
  @NappyZoeRebel5 ай бұрын

  Great video!!! Thank you!!!

• 
  @balaofcanada5 ай бұрын

  Thank you

• 
  @user-sc2ei9hu2t5 ай бұрын

  Thank you

• 
  @balaofcanada5 ай бұрын

  You are welcome

• 
  @jogmas125 ай бұрын

  You are a good amateur mechanic. Thanks 🙏🏾 for your service

• 
  @balaofcanada5 ай бұрын

  Thanks for your lovely compliment

• 
  @balaofcanada5 ай бұрын

  This video is done to simplify the understanding of heart structure and function. Hope you find it helpful.

• 
  @user-tw5px4xp8c13 күн бұрын

  After watching, I now better understand how my heart works, I will be happy to learn more about how my body functions from you sir 🙏🫡

• 
  @anuskharvi5 ай бұрын

  Thank you🙏

• 
  @balaofcanada5 ай бұрын

  You’re welcome 😊