You act like a regular idiot, but your produced video is really great. Thank you mate.
@rachaelb9164Күн бұрын
I’m going to have to watch this a few times. Lots of great info
@avocadoarms3582 күн бұрын
Too much hands
@tigheklory3 күн бұрын
Thank you for this!!
@G4DRONE6 күн бұрын
Top
@enosunim8 күн бұрын
Talks about second Z-axis, removing springs, but uses stock belts, which also are installed askew (yeah, as intended by manufacturer). Facepalm Remove bed regulation knobs, then argues that X bar is not bubble leveled. Double Facepalm Talking about 'PRO' firmware and printing like a turtle without pressure advance and input shaping. Multi Facepalm Installed spring nut upside down. Ultra Facepalm Have spent a lot of money for usless upgrades and recommend to spend $300 for tweaking a printer, instead of... You know some other brand printer, which is fast, does not have knobs, have 'professional' firmware out of the box, and costs less then $300. It is called.. like some european paper format. I will not advertise though. Monster Facepalm! PS Please understand me right. I am for cheap printing. And for Ender 3 actually (yeah, the bowden very first version). Just buy it cheap, you can get very cheap it. And install a direct drive. changing springs also a good idea. You also can just straighten your bed, with your knee, metal ruler and a flashlight. And thats all. No, you should not use bubble level to set up your printer. You better use high quality square, metal ruler and caliper. Also compiling firmware is nothing hard and you do not even need to buy printer for that. Just download your printer template (in case Ender 3 no trouble at all, unless you change motherboard). And that's it, just read the ducking manual. PPS Cheers!
@agrigor18 күн бұрын
the lead screw in ender 3 series is 365mm. Nema stepper motor with integrated lead screw have a max length of 350. Can these missing 15 mm be a problem ?
@MaxyMeanderings7 күн бұрын
The installed 350mm leadscrew stepper reaches the top of the frame on the ender 3 just fine. No Z height is lost.
@agrigor17 күн бұрын
@@MaxyMeanderings are you sure this leadscrew has 2mm pitch as the original ender 3 leadscrew ? The diagram image shows Tr8x8. There is a 310mm lead option with 2mm pitch (called 310-TR8X2) . Do I read something wrong ?
@unifytechuk8 күн бұрын
Try cleaning the lead screws and using a dry ptfe lubricant spray, have you also investigated changing out the v-slot wheels for polycarbonate?
@camilocortes631511 күн бұрын
This video NEEDS to be on the wiki of all manufacturers! Amazing, very clear and top quality! New sub!!!!
@eddy-readysteady-go900114 күн бұрын
If you dont like it so much then why do you use the ender? Stop complaining.
@Incorruptus115 күн бұрын
The yo bro factor here is extreme. Yo. 😂 ❤
@p3rrypm15 күн бұрын
You could just buy a Bambu and be done with it, the A1 has the smoothest surface I’ve yet seen on any print.
@Iisakkiik16 күн бұрын
Why am I watching this, I already have belted z 😂 Nice video :)
@lordofthehats446823 күн бұрын
Sir, a second z band has hit the second print.
@janholtzhausen673523 күн бұрын
eKKcentric
@user-sm8vf9hs3y28 күн бұрын
good work 👏
@larryfroot28 күн бұрын
I went all out and chucked the lead screws and went for a z-belt driven solution. Works beautifully well.
@VBall129529 күн бұрын
Loving this video, your quality and explanation, and the channel as a whole. Can't wait to see what else you do man
@maciejpospiech4371Ай бұрын
Have You heard about WobbleX?
@Hermy21Ай бұрын
Great job on the booth and video!
@lonewolfsstuckАй бұрын
You sir deserve more views and subs for your quality of videos.
@kaihentheАй бұрын
i became one of the 2K subs cause of this vid, keep goin!
@TheSquirrelessАй бұрын
Any place to buy the thrust bearings, no longer showing
@ly2Ай бұрын
2k subs is criminal
@jinultonicАй бұрын
I've subscribed without even watching the whole video. The intro was so captivating.
@vedanthinornАй бұрын
Note that brass oldham couples like the ones you showed aren't supposed to work well under compression, when an oldham coupler that responds well to compression is installed the lead screw isn't constrained laterally at the X axis, in those cases constraining at the top _is_ a good idea because otherwise the lead screw is underconstrained. There are bearing-based oldham-style couplers like the "wobble wings" and the suchlike that are designed to work under compression, also bear in mind that thrust bearing are great but can introduce vertical motion in the lead screw if they are not perfectly perpendicular to the axis of the lead screw, which can be tough to ensure
@Jim_One-wl4keАй бұрын
In my opinion & experience as long as we let the top end hang free and allow the linear rod to hold its position. Best is increase to 10mm rod or use linear guide the Z. I use a PLA printed z Lead nut and it really zero down the blacklash. Sometimes some parts of the machine need NOT be metal to cut out vibrations and noise. Part of your printed band seems like uneven extrusions not totally z-band. I am not sure about converting to belt to stop my blame on the Z-Leadscrew bend. Anyone tested can share your views too. Bear in mind Z is the least movement axis among all bed slingers. Thanks for making this well presented video ❤
@tannerdudemanАй бұрын
This is one of the best produced 3d printing videos I have ever seen. Engaging at every segment.
@mcclungandsonsАй бұрын
Best cure for zbanding on and ender 3... get a bambu labs 3d printer.
@andrewwatts1997Ай бұрын
Great advice ! I solved the leadscrew issues by, THROWING THEM AWAY and replacing them with a belted Z mod. Z hopping is MEGA accurate now and my supports just snap clean off. Next thing I will do is install linear rails because those POM wheels are a huge problem aswell....
@Sena121Ай бұрын
And there is my next upgrade for my ender 5 pro. Someday this bitch will print perfectly...
@pekonipilvi116Ай бұрын
or just spend 60bucks for dual belt Z kit for elegoo :D it deletes whole wobble problem of leadscrews...and if u want u can combine it with linear rails so POM wheels wont get problematic
@feilko2170Ай бұрын
as a polymechanic this hurts my eyes
@feilko2170Ай бұрын
HOW THE FUCK AM I PRINTING A Z SCREW CLEANER IF MY PRINTER CAN'T EVEN PRINT A POTATO ???
@slicedpageАй бұрын
okay put your hand up if you thought, like I did, that it was your front doorbell at @00.44?
@GertGybelsАй бұрын
Funny, looking at Mark Wahlberg with the voice of Mark Rober.
@dev-debugАй бұрын
I use anti-backlash pom nuts but if you don't use z-hop anti-backlash really won't do anything for you. The single Z screw is the downfall of virtually every entry level bed slinger.
@TheYear-dm9opАй бұрын
I was really wondering, why there were no "lead screw stabilizers" on my Prusa. Seems like they had done their homework.
@matthewmathis62Ай бұрын
What a great video! Fun to watch, too. :) Thanks Maxy,
@peterclarke5323Ай бұрын
Thanks. You helped me.
@eraldylliАй бұрын
Quite comprehensive. Great stuff. Appreciated how much effort you put into it.
@jayd9203Ай бұрын
Eccentric pronunciation ek-sen-trik not e-sen-trik
@home_Grown_studioАй бұрын
bro, need to pay your light bill
@reyalPRONАй бұрын
0:48 dont be sorry mate.. over here we use something called "scale" to get the dimensions to the correct measurement, metric. also i cant remember a slicer without a scale tool.
@JoanMendozaАй бұрын
Thanks for all your testing!!
@Cara.314Ай бұрын
ek-cen-tric, not ee-cen-tric
@gymkhanadogАй бұрын
This. So much this. 🤣
@holdengohs6997Ай бұрын
It's crazy that your videos aren't blowing up yet. This and the Z-wobble video were both top quality, and you can feel the practicality of it all. Keep up the good work!
@frankdearr2772Ай бұрын
Great topic, thanks 👍
@Deviled_EGАй бұрын
Didn’t you already post this I know I saw this before🤔
Пікірлер
You act like a regular idiot, but your produced video is really great. Thank you mate.
I’m going to have to watch this a few times. Lots of great info
Too much hands
Thank you for this!!
Top
Talks about second Z-axis, removing springs, but uses stock belts, which also are installed askew (yeah, as intended by manufacturer). Facepalm Remove bed regulation knobs, then argues that X bar is not bubble leveled. Double Facepalm Talking about 'PRO' firmware and printing like a turtle without pressure advance and input shaping. Multi Facepalm Installed spring nut upside down. Ultra Facepalm Have spent a lot of money for usless upgrades and recommend to spend $300 for tweaking a printer, instead of... You know some other brand printer, which is fast, does not have knobs, have 'professional' firmware out of the box, and costs less then $300. It is called.. like some european paper format. I will not advertise though. Monster Facepalm! PS Please understand me right. I am for cheap printing. And for Ender 3 actually (yeah, the bowden very first version). Just buy it cheap, you can get very cheap it. And install a direct drive. changing springs also a good idea. You also can just straighten your bed, with your knee, metal ruler and a flashlight. And thats all. No, you should not use bubble level to set up your printer. You better use high quality square, metal ruler and caliper. Also compiling firmware is nothing hard and you do not even need to buy printer for that. Just download your printer template (in case Ender 3 no trouble at all, unless you change motherboard). And that's it, just read the ducking manual. PPS Cheers!
the lead screw in ender 3 series is 365mm. Nema stepper motor with integrated lead screw have a max length of 350. Can these missing 15 mm be a problem ?
The installed 350mm leadscrew stepper reaches the top of the frame on the ender 3 just fine. No Z height is lost.
@@MaxyMeanderings are you sure this leadscrew has 2mm pitch as the original ender 3 leadscrew ? The diagram image shows Tr8x8. There is a 310mm lead option with 2mm pitch (called 310-TR8X2) . Do I read something wrong ?
Try cleaning the lead screws and using a dry ptfe lubricant spray, have you also investigated changing out the v-slot wheels for polycarbonate?
This video NEEDS to be on the wiki of all manufacturers! Amazing, very clear and top quality! New sub!!!!
If you dont like it so much then why do you use the ender? Stop complaining.
The yo bro factor here is extreme. Yo. 😂 ❤
You could just buy a Bambu and be done with it, the A1 has the smoothest surface I’ve yet seen on any print.
Why am I watching this, I already have belted z 😂 Nice video :)
Sir, a second z band has hit the second print.
eKKcentric
good work 👏
I went all out and chucked the lead screws and went for a z-belt driven solution. Works beautifully well.
Loving this video, your quality and explanation, and the channel as a whole. Can't wait to see what else you do man
Have You heard about WobbleX?
Great job on the booth and video!
You sir deserve more views and subs for your quality of videos.
i became one of the 2K subs cause of this vid, keep goin!
Any place to buy the thrust bearings, no longer showing
2k subs is criminal
I've subscribed without even watching the whole video. The intro was so captivating.
Note that brass oldham couples like the ones you showed aren't supposed to work well under compression, when an oldham coupler that responds well to compression is installed the lead screw isn't constrained laterally at the X axis, in those cases constraining at the top _is_ a good idea because otherwise the lead screw is underconstrained. There are bearing-based oldham-style couplers like the "wobble wings" and the suchlike that are designed to work under compression, also bear in mind that thrust bearing are great but can introduce vertical motion in the lead screw if they are not perfectly perpendicular to the axis of the lead screw, which can be tough to ensure
In my opinion & experience as long as we let the top end hang free and allow the linear rod to hold its position. Best is increase to 10mm rod or use linear guide the Z. I use a PLA printed z Lead nut and it really zero down the blacklash. Sometimes some parts of the machine need NOT be metal to cut out vibrations and noise. Part of your printed band seems like uneven extrusions not totally z-band. I am not sure about converting to belt to stop my blame on the Z-Leadscrew bend. Anyone tested can share your views too. Bear in mind Z is the least movement axis among all bed slingers. Thanks for making this well presented video ❤
This is one of the best produced 3d printing videos I have ever seen. Engaging at every segment.
Best cure for zbanding on and ender 3... get a bambu labs 3d printer.
Great advice ! I solved the leadscrew issues by, THROWING THEM AWAY and replacing them with a belted Z mod. Z hopping is MEGA accurate now and my supports just snap clean off. Next thing I will do is install linear rails because those POM wheels are a huge problem aswell....
And there is my next upgrade for my ender 5 pro. Someday this bitch will print perfectly...
or just spend 60bucks for dual belt Z kit for elegoo :D it deletes whole wobble problem of leadscrews...and if u want u can combine it with linear rails so POM wheels wont get problematic
as a polymechanic this hurts my eyes
HOW THE FUCK AM I PRINTING A Z SCREW CLEANER IF MY PRINTER CAN'T EVEN PRINT A POTATO ???
okay put your hand up if you thought, like I did, that it was your front doorbell at @00.44?
Funny, looking at Mark Wahlberg with the voice of Mark Rober.
I use anti-backlash pom nuts but if you don't use z-hop anti-backlash really won't do anything for you. The single Z screw is the downfall of virtually every entry level bed slinger.
I was really wondering, why there were no "lead screw stabilizers" on my Prusa. Seems like they had done their homework.
What a great video! Fun to watch, too. :) Thanks Maxy,
Thanks. You helped me.
Quite comprehensive. Great stuff. Appreciated how much effort you put into it.
Eccentric pronunciation ek-sen-trik not e-sen-trik
bro, need to pay your light bill
0:48 dont be sorry mate.. over here we use something called "scale" to get the dimensions to the correct measurement, metric. also i cant remember a slicer without a scale tool.
Thanks for all your testing!!
ek-cen-tric, not ee-cen-tric
This. So much this. 🤣
It's crazy that your videos aren't blowing up yet. This and the Z-wobble video were both top quality, and you can feel the practicality of it all. Keep up the good work!
Great topic, thanks 👍
Didn’t you already post this I know I saw this before🤔
I had to make some changes...
No business having this good production quality