Пікірлер

• 
  @pappytinkers21 сағат бұрын

  Shagalicious lol. I can see Austin Powers driving that

• 
  @pappytinkersКүн бұрын

  I have an old Cop Out that I'm planning to freshen up a little and maybe a little better detail painting. It did not have the rubber band, but i don't know how old it is. Yours turned out very nice!

• 
  @PlasticImaginationWorkshopКүн бұрын

  Thank you! Enjoy your refresh of the Cop Out, that is a kit I always wanted but never picked up. I did have a "snap-tite" version that resembled it; dang, that was like 40+ years ago.... Thanks for watching, have a great day.

• 
  @donaldshain5647Күн бұрын

  Looks good though but back in the late 60s this is the same kite one of the hardest kits I have not built one in a while I like Revel kits And Itaileri Trucks better detailing and moulding .I have put together many AMT kits even from they where AMT-MPC there instructions are hard but after so many builds I under stand them. So I can look at a page and knowing the step by memory and just a glance thats all ,I have owned a few truck myself and just stop driving a few years ago building model trucks help me as a driver to one the test for class A driver license you have to explain and point out the pre trip inspection and check many like the s cam brake play air and on . The models are the same as the trucks just smaller and its up to you how much detail air lines plumed and on keep modeling and always enjoy you can always build another one the same or kit base for parts and build up your spare parts ,

• 
  @PlasticImaginationWorkshopКүн бұрын

  Awesome! Thanks for sharing, and thanks for watching. Have a great day 😀

• 
  @ramblers692 күн бұрын

  I use it too for chrome, great stuff

• 
  @PlasticImaginationWorkshopКүн бұрын

  Thanks Tom! And thanks for watching and commenting. I really appreciate it. Have a great day.

• 
  @mx4720002 күн бұрын

  Will it also remove the heavy lacquer that is under the chrome? Many chromed parts have a layer of a yellowy lacquer under the chrome itself.

• 
  @PlasticImaginationWorkshop2 күн бұрын

  So... most of the time, it removes everything, and you are left with bare plastic. That said, I have had a few kits that leave a yellowish color on the parts. I used to let them soak longer-a lot longer-and most of it would come off. However, I don't do that anymore; I just prime and paint the parts. The yellowish residue isn't an issue once they are primed and painted. I hope this answers your question and helps. Thanks for watching, and have a great day.

• 
  @michaelcooke25592 күн бұрын

  Nice tutorial. Thanks for sharing.

• 
  @PlasticImaginationWorkshop2 күн бұрын

  You are welcome! Thanks for watching. Have a great day.

• 
  @LarrysModelShop2 күн бұрын

  Nice video.

• 
  @PlasticImaginationWorkshop2 күн бұрын

  Thank you and Thanks for watching. Have a great day.

• 
  @dongordon44642 күн бұрын

  thank you

• 
  @PlasticImaginationWorkshop2 күн бұрын

  You're welcome. Have a great day.

• 
  @shadhord95023 күн бұрын

  I'm currently building this kit. My Dad was a truck driver in the 70's and I built many of these kits growing up. As much is the kits cost you thing the instructions would be better? I honestly don't know how I managed to but these things together as a kid! lol

• 
  @PlasticImaginationWorkshop3 күн бұрын

  I hear you! It's definitely a challenging kit but I still think it's worth it. Thanks for watching and have a great week.

• 
  @bigcharliesmodelgarage2965 күн бұрын

  Nice build 😊

• 
  @PlasticImaginationWorkshop4 күн бұрын

  Thanks!

• 
  @profitlauncher225 күн бұрын

  twenty seven done Keep up the hard work. It's paying off , stay tuned with fellow friends

• 
  @PlasticImaginationWorkshop4 күн бұрын

  Thanks!

• 
  @ramblers695 күн бұрын

  Looks really nice David

• 
  @PlasticImaginationWorkshop5 күн бұрын

  Thanks, Tom! Have a great weekend 👍

• 
  @Johnny-tt8zc6 күн бұрын

  Turned out pretty nice.

• 
  @PlasticImaginationWorkshop5 күн бұрын

  Thank you, Sir. Have a great weekend 👍

• 
  @user-sk8nd1kd9y6 күн бұрын

  WHAT DID YOU USE TO CLEAN THE CHROME OFF?

• 
  @PlasticImaginationWorkshop5 күн бұрын

  I use "Super Clean" to remove the chrome. Thanks for watching, and have a great weekend 👍

• 
  @user-sk8nd1kd9y7 күн бұрын

  HAVE YOU EVER BUILT A REVELL OF GERMANY KW OR PETERBUILT?

• 
  @PlasticImaginationWorkshop7 күн бұрын

  Yes. I built the Revell Pet a while back. Just search my channel for "Peterbilt" and it will pop up. Thanks for watching, and have a great day 😀

• 
  @user-wp9lb3mt2n7 күн бұрын

  Anyone ever notice the lack of stake pockets?

• 
  @PlasticImaginationWorkshop7 күн бұрын

  DANG!!! I didn't notice that. Thanks for mentioning it. Thanks for watching, have a great day.

• 
  @tombower4508 күн бұрын

  I've enjoyed your channel but Respectfully. lately it's turned more into "informercials". There are plenty of youtube channels for that kind of content. Please go back to building. You're a skilled builder and you should focus on that. Of course, this is only my opinion. Take care

• 
  @PlasticImaginationWorkshop7 күн бұрын

  Thanks for the input, Tom. I don't want it to be an "infomercial" sort of channel, but I am trying to find a good balance. It's still a work in progress. I am building gradually, and building takes time, especially since I don't want to rush a build just to make content. More builds are on the way. Thanks for your input; I really appreciate it. Also, thanks for watching, and have a great week.

• 
  @bigcharliesmodelgarage2968 күн бұрын

  Nice build😊

• 
  @PlasticImaginationWorkshop8 күн бұрын

  Thanks! 👍

• 
  @ronandanne112 күн бұрын

  Outstanding build!

• 
  @PlasticImaginationWorkshop11 күн бұрын

  Thanks! Have a great day 👍

• 
  @marclangevin915212 күн бұрын

  The original AMT kits had part numbers and also a description of the part ie muffler , starter etc .

• 
  @PlasticImaginationWorkshop12 күн бұрын

  Cool! Thanks.

• 
  @ronaldgreen529213 күн бұрын

  Finished build is awesome 😮😮🎉

• 
  @PlasticImaginationWorkshop13 күн бұрын

  Thanks! Have A great weekend and thanks for watching.

• 
  @ronaldgreen529213 күн бұрын

  Any color, but, puke 🤢 green! 🤔😐

• 
  @PlasticImaginationWorkshop13 күн бұрын

  That color isn't for everyone, that's for sure.

• 
  @MidwestFarmToys14 күн бұрын

  99?! I remember those kits existing way earlier than that I am guessing the re-released it

• 
  @PlasticImaginationWorkshop14 күн бұрын

  Yes, you are correct. The original release of this kit was in 1975 but, this one was re-released in 1999. Thanks for watching, have a great weekend.

• 
  @hangerbird14 күн бұрын

  any tip dry?

• 
  @PlasticImaginationWorkshop14 күн бұрын

  Thanks for the question! No, these paints have never had an issue with "tip dry". I forgot to mention that in the video, I should have. At the time I just didn't think about it because it's never been a issue with these paints. Thanks for the great question! Thanks for watching and have a great weekend.

• 
  @davidchin35018 күн бұрын

  Nice paint and airbrush review David 👍

• 
  @PlasticImaginationWorkshop18 күн бұрын

  Thanks David!!! Have a great day!

• 
  @JustBelowAverageModelCars20 күн бұрын

  Nice review of the paint, I’ve had my eye on those for a while, so this review was very helpful. Nice overview of your cleaning procedure, also. Thanks!

• 
  @PlasticImaginationWorkshop19 күн бұрын

  Glad it was helpful! Thanks for watching and have a great day 😀

• 
  @INeeDMyGarageTime20 күн бұрын

  You always deliver Awesome Reviews. I'm definitely going to get into airbrushing .

• 
  @PlasticImaginationWorkshop19 күн бұрын

  Awesome!!!! you should totally try airbrushing. It's a whole new level. Thanks for watching, and have a great day 😀

• 
  @blueline30820 күн бұрын

  what is wrong with your hands? might wanna see a doc.

• 
  @PlasticImaginationWorkshop19 күн бұрын

  Thanks. I'm not self-conscious about that at all. I've actually seen several doctors, but so far, there is no cure.

• 
  @dudleyrathborne984921 күн бұрын

  Hi There . I just recently assembled and painted this model .I found that the sub hull was easy enough to do . What was the greatest challenge was the paint for the the stand . I realized that getting the detail paint on the stand would make or break the overall success of the the Seaview model . I'm pleased to say that I was successful and the end result is great . Thanks for your idea's as I watched this episode before I began . .....Yours Truly ....DGR

• 
  @PlasticImaginationWorkshop20 күн бұрын

  Awesome!!! I'm glad you enjoyed the kit and that it tuned out great 👍 thanks for watching and have a great weekend 👍 😀

• 
  @davidchin35027 күн бұрын

  Nice waterfall and enjoy your nature bonding😊

• 
  @PlasticImaginationWorkshop27 күн бұрын

  Thank you, I will

• 
  @user-kz8kt9dm2z27 күн бұрын

  Can this kit be built as a day cab with tandem axles?

• 
  @PlasticImaginationWorkshop27 күн бұрын

  Yes it can. Thanks for watching and have a great day

• 
  @maquetteTrisАй бұрын

  Hello, I speack french and I have'nt understand what you say when you use the black paint on the steering wheel . Can you explain it please, thank you !

• 
  @PlasticImaginationWorkshopАй бұрын

  Bonjour, Merci pour la question! Pour donner au volant un aspect "grain de bois", je l'ai peint en orange et je l'ai laissé sécher. Après cela, j’ai utilisé un lavis noir et je l’ai également laissé sécher. Une fois le linge sec, j'en ai légèrement retiré une partie avec de l'essence minérale jusqu'à ce qu'il ressemble à du bois. Enfin, j'ai appliqué une couche transparente brillante. Je vais passer cela via Google Translate et j'espère que cela apparaîtra clairement pour vous. J'espère que ça aide. Merci d'avoir regardé et passez une bonne semaine !

• 
  @maquetteTrisАй бұрын

  @@PlasticImaginationWorkshop merci 👌

• 
  @dakel20Ай бұрын

  I've had one of these for a while, they're shockingly useful for a little hunk of aluminum.

• 
  @PlasticImaginationWorkshopАй бұрын

  Yes they are! Thanks for watching and commenting. Have a great day!

• 
  @milgeekmediaАй бұрын

  (Audio comments aside)... This is one of those tools that isn't really essential BUT as you point out it is good to clearly differentiate different tools on you workbench by having specific 'mini stations' for each process. It kinda cleans up your process... I - like you - used to use an old plate or lid for painting and super glue and I frequently lost sight of where my superglue blob was! So this tool on my desk is a good signpost to where the sticky stuff is! :) Thanks for the video.

• 
  @PlasticImaginationWorkshopАй бұрын

  I totally agree, not an essential too but... I haven't used a plastic lid for glue since I started using this and it's been great. I don't have to worry about dipping my brush in Supers Glue! Thanks for watching and commenting. Have a great day.

• 
  @milgeekmediaАй бұрын

  Hi there, apologies - but are you still having audio problems? There is an annoying high pitched whine going on throughout your commentary. Sounds like some sort of feedback or connection issue and it happens every time you start speaking.

• 
  @PlasticImaginationWorkshopАй бұрын

  No need to apologize, I am aware of it and it's been a real pain. I am not good with audio but I think it is an issue with my mic. I am trying out a different one so hopefully that will help. Thanks for mentioning it. have a great rest of your weekend.

• 
  @juanbrauliosobrevielafuert8044Ай бұрын

  Saludos desde España inreresante video y muy practico gracias ¡¡¡¡¡¡¡¡¡¡

• 
  @PlasticImaginationWorkshopАй бұрын

  Greeting back to you from the US! It really is a great little tool. Thanks for watching and for commenting. have a great day!

• 
  @JustBelowAverageModelCarsАй бұрын

  Very good product review, thanks for sharing.

• 
  @PlasticImaginationWorkshopАй бұрын

  Thanks for watching! Have a great weekend!

• 
  @JeffsmodelgarageАй бұрын

  That’s a pretty cool tool I’m tired of gluing the toothpick to my bench thanks David

• 
  @PlasticImaginationWorkshopАй бұрын

  You're welcome! It is a pretty cool tool. Thanks for watching, and have a great weekend 👍

• 
  @ramblers69Ай бұрын

  Great review David, 😎👍✌️

• 
  @PlasticImaginationWorkshopАй бұрын

  Thanks, Tom! I appreciate it. Thanks for watching, and have a great weekend 👍

• 
  @andrewsandoz8005Ай бұрын

  Not very impressive.

• 
  @PlasticImaginationWorkshopАй бұрын

  Thank you for watching and sharing your feedback. I appreciate your honesty. If you have any specific suggestions or feedback on how I can improve, I'm open to hearing them. Constructive criticism is always valuable to me.

• 
  @claudio8395Ай бұрын

  Hola , me acabo de suscribir , saludos.

• 
  @PlasticImaginationWorkshopАй бұрын

  Thanks for the SUB, and have a great day 👍

• 
  @cjpardo100Ай бұрын

  I bought the same truck and I am following the recommended colors. Is this an original color scheme for the truck??? It does look beautiful.

• 
  @PlasticImaginationWorkshopАй бұрын

  Thank you, and no, this color scheme is just my imagination. This is a nice kit, I'm sure you will enjoy it. Thanks for watching and commenting. Have a great day.

• 
  @silencekitАй бұрын

  I just did one! Gift from a couple years ago. Came out really nice once weathered.

• 
  @PlasticImaginationWorkshopАй бұрын

  Awesome! It's a really cool little kit. Thanks for watching, and have a great weekend 👍

• 
  @silverfingerthesilverstack5062Ай бұрын

  I think they should use your model for the box art, stunning.

• 
  @PlasticImaginationWorkshopАй бұрын

  Wow! Thank you, that means a lot. Thanks for watching and have a great week.

• 
  @dickfitzwell1557Ай бұрын

  I've always used a liquid soap like Softsoap on my slot cars to insert the wheels into the tires. Just spread a little soap inside the tire and it was easy to slip on. Don't see why it wouldn't work here.

• 
  @macatchison7029Ай бұрын

  Nice build. Nice video. I have this truck and the Coca Cola trailer and planning on building them both next!! Thanks for the heads up on the tractor. Will definitely use this video as a guide

• 
  @PlasticImaginationWorkshopАй бұрын

  Thanks 👍 I'm actually building the trailer now. Thanks for watching and have a great week.