Ich nö 😂😂😂 Das mit 2S . Ich pack ein und bleib zu Hause 😁 Geiler Lauf 👍👍👍👍🤩 Bin dann mal auf 3S gespannt. Wieviel KV sind 6,5 T in etwa ? Viele Grüße. P.S. Werde Dich bestimmt noch nerven, wenn meiner Kac… läuft 😁
@rc_michi12 сағат бұрын
@@msfunracer Danke! Dabei sein ist alles 😅Sind laut Hersteller 5350 KV, allerdings mit Standard-Timing. Also in der Realität wahrscheinlich eher mehr 😉 Klar, wir helfen uns gegenseitig. Dafür ist eine Community doch da 😊👍
@mitchellminer4596Күн бұрын
Great pass buddy!👊👍👍
@rc_michiКүн бұрын
Thanks buddy! I'm curious to see if I can maintain this at higher speeds 😅
@jack-o-tradesКүн бұрын
Nice shakedown runs. It looks fast and stable!
@rc_michiКүн бұрын
Thanks buddy! I saw your shakedowns, also very nice. Only the curbs hurt 😅
@scaleworksRCКүн бұрын
Awesome setup and nice smooth pass! I was guessing in the low 70s, but it must be the size of the car that makes it look faster.
@rc_michiКүн бұрын
Thanks bro! 70s next time 😅
@coygtrcКүн бұрын
😮 hyper stable 😮 Well done (except I barely saw the screen of the phone 🧐)👍🤝
@rc_michiКүн бұрын
Thanks buddy! Yes, the lightning of the phone display was set too low... Next time I'll do it better 😉
@reitplace4765Күн бұрын
Good stuff Mich, 😎🤙👍
@rc_michiКүн бұрын
Thank you my friend! 😊
@Ercc2flaКүн бұрын
What diff gears are you running?
@rc_michiКүн бұрын
None in the front (spool), rear Tamiya part # 54875
@thebandit19745 күн бұрын
That is going so straight
@rc_michi5 күн бұрын
@@thebandit1974 Getting a Tamiya running straight is one of the harder jobs. But with a bit of experience and setup you can do it 😉
@reitplace47656 күн бұрын
Smokin. 😎🤙
@Rcprescription6 күн бұрын
Car looks awesome! That was the straightest I’ve seen one go so far! 😂🤜🤛
@rc_michi5 күн бұрын
@@Rcprescription Thanks bro! I'll give my best 😅
@Gernotrametsteiner-dl6ns7 күн бұрын
❤Racing time 👍🔥😎👑🏆😍🤩🤣😊🌞😇
@rc_michi5 күн бұрын
@@Gernotrametsteiner-dl6ns Hell yeah 😀👍
@SkippyRC7 күн бұрын
That's quick for the small wheels, best of luck, I am entering the brushed class.
@rc_michi5 күн бұрын
@@SkippyRC Thanks buddy, I wish you also good luck! 👍
@JoevsRc8 күн бұрын
Can't wait to see your runs
@rc_michi8 күн бұрын
@@JoevsRc Always appreciated bro 😁 Are you also part of the party?
@JoevsRc7 күн бұрын
@rc_michi I will be going In . I just finished the build and Will have an intro video in a few days
@rc_michi7 күн бұрын
@@JoevsRc Glad to hear, so I'm excited! 👍
@electricnitrorc8 күн бұрын
Well done 👏 this years speedrun will be very interesting 👍
@rc_michi8 күн бұрын
@@electricnitrorc Thanks buddy! You have my full agreement 😉
@reitplace47659 күн бұрын
Ya buddy looks like a ripper.. Let the fun begin..
@rc_michi8 күн бұрын
@@reitplace4765 I hope she is one too 😅 The fun has already begun, just waiting for the challenge to start 😁 What's the status of your TT02 challenge?
@MechanicallyFun10 күн бұрын
Nice run👍 I still cannot make up my mind to join this year or next year.
@rc_michi9 күн бұрын
@@MechanicallyFun Thanks! Thats shame, so I wish you much fun with your other projects 😉
@poorboysrc10 күн бұрын
She looks fast already! Have fun!
@rc_michi9 күн бұрын
@@poorboysrc Thanks! Yes, she is already. But the small wheels make it slower. Its a really smooth car, nice choice for the challenge 😉
@scaleworksRC10 күн бұрын
Niiice! There's just something special about that Escort body. It's timeless, and great to see you got it running smoothly in the test footage
@rc_michi9 күн бұрын
@@scaleworksRC Thanks! Its really a great looking car, so I always wanted to have one. Now it was a good chance to get one 😉
@alantaylor35320 күн бұрын
After looking for ages, I've finally bought an 037 TA02S. £120 off Ebay, it's a fully completed but never ran shelf queen with a brushed system in it.. I'm really looking forward to it arriving... I'm going to fit a mild brushless system in it as soon as I get it... Do you have any tips for running a TA02 on brushless.? Stay safe out there mate & the very best wishes from Scotland 🏴 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍 👍
@rc_michi20 күн бұрын
Hey Alan, congrats, thats a great purchase! I would recommend the reinforced cardan shaft, CVDs in the front and the 66T spur gear. That should be enough for now. Brushless motor should have around 3000 KV. Thanks and also best wishes from germany. Always appreciated! 😄
@mitchellminer459628 күн бұрын
👌and she drove away!😂👊👍👍
@msfunracerАй бұрын
Blitz 💥 😂 Wahnsinn 🤩 Das Du noch siehst wo Du lang fährst 👍👍👍
@EatChowAzzАй бұрын
do u use any gyro for added stability
@NBC_NCOАй бұрын
That's excellent!!!
@RcprescriptionАй бұрын
Awesome run brother! You are the only one with a more sketchy road than me!..😂🤜🤛👍
@rc_michiАй бұрын
Thanks bro. Yeah, perfect for rally 😅
@mitchellminer4596Ай бұрын
Great run buddy!👌👍👍👊
@SabineVetter-iq9drАй бұрын
Hol dir mal ein hobao vte 2 dann locker 300
@rc_michiАй бұрын
Ganz so locker gehen 300 selbst mit nem Hobao nicht. Da muss man schon einiges machen. Erstmal die Kleinen ausreizen 😅
@hardcores02Ай бұрын
@SabineVetter-iq9dr so einfach ist das mit einem VTE2 auch nicht...und ich glaube, er möchte seinen TT02 weiterbringen ;)
@SabineVetter-iq9drАй бұрын
Da habt ihr recht
@RcprescriptionАй бұрын
Awesome runs brother!!… you have that dude dialed in! 🤜🤛
@rc_michiАй бұрын
Thanks brother! 👊
@scaleworksRCАй бұрын
Very nice clean passes! I see you like running your motors at 20 degrees timing. I played around with mine and got to 11 degrees with no benefits on the 5900kv motor, so I went back to zero. I wonder what the difference in speed is 🤔
@rc_michiАй бұрын
Thanks bro! 👊 The timing should always result in an increase in performance. Otherwise the ESC or the battery could be too weak, or the gear ratio is too low.
@scaleworksRCАй бұрын
@@rc_michi Gotcha.. I'll have to play around with that once I decide to run again. Have a great rest of your day!
@bluebeastRCАй бұрын
Wow she's flying. And it's so beautiful there. Where are you at? 👊
@rc_michiАй бұрын
Thank you! 😊 It's in the south of Bavaria!
@bluebeastRCАй бұрын
Wow you got nice straight and empty roads. And beautiful runs. Liked and subscribed. Cheers! 😎🔥
@rc_michiАй бұрын
Thanks buddy, much appreciated! 😄👊
@Capz24Ай бұрын
What pitch is the gear?
@rc_michiАй бұрын
It's Tamiya Modul 0.6. Similar to 48 pitch, but not compatible.
@msfunracerАй бұрын
Du musst mal wieder die Scheiben putzen 😁
@rc_michiАй бұрын
Da hast du allerdings recht 😅
@hardcores02Ай бұрын
Kenn ich 😂
@scaleworksRCАй бұрын
Very nice.. and on a rally chassis!
@rc_michiАй бұрын
Thanks bro! Yeah, I should try this on gravel 😅
@scaleworksRCАй бұрын
@@rc_michi I hope it's smooth and straight 🙏 😁
@rc_michiАй бұрын
@@scaleworksRC One of the best cars designed by Tamiya 👍
@scaleworksRCАй бұрын
@@rc_michi agreed, but I'm leaning toward the Xv02.. I like the shaft drive better than belts
@rc_michiАй бұрын
@@scaleworksRC The sound is definitely better 😅
@SabineVetter-iq9drАй бұрын
Da wollte der xv01 schwimmen gehen
@rc_michiАй бұрын
Der hält das aus zum Glück 😅
@SabineVetter-iq9drАй бұрын
Gratuliere dir zum pb 🎉
@rc_michiАй бұрын
Danke dir! 😊
@SabineVetter-iq9drАй бұрын
Bau dir mal ein tp 3060 motor in dein Auto
@rc_michiАй бұрын
@@SabineVetter-iq9dr Kommt noch. Erstmal den aktuellen ausreizen 😉
@scaleworksRCАй бұрын
Very nice passes! Congrats on your PB! 🎉🏅🎊
@rc_michiАй бұрын
Thanks bro! 200 are within reach 😉👍
@scaleworksRCАй бұрын
@@rc_michi You can do it! I'm messing around with a boat right now.. re-painting and getting ready for a maiden voyage hopefully before dark! It says 45km/h (basically 28mph) on the box, but I'm gonna try for 30mph 👍🚤💨
@reitplace4765Ай бұрын
Nice Mich....
@rc_michiАй бұрын
Thanks buddy! 124 next time 😅👍
@reitplace4765Ай бұрын
@@rc_michi get it!!!!!
@hardcores02Ай бұрын
Geiles Ding. Gratuliere zur PB 💪🏻
@rc_michiАй бұрын
Danke dir! ☺👍
@BriansRCStuff2 ай бұрын
"When this baby hits 88 mph, you are going to see some serious sh*t." Keep pushing, it took me forever to get my Bandit up to 100 mph on 3s!
@rc_michi2 ай бұрын
Yeah, I should have got a Delorean body 😂 One of my favourite movies, absolutely love it! Still trying to improve my current PB of 106 😉
@BriansRCStuff2 ай бұрын
@@rc_michi that would have been awesome if one would fit. 106 is great…. I took a break from going faster as I was worried I was just going to crash. 😂
@micron32682 ай бұрын
Nice runs buddy! 👍 What's your replacement esc going to be MMX8S? subd!
@rc_michi2 ай бұрын
Thanks buddy, much appreciated! Yeah, the MM8XS is already built in! Currently I'm waiting for the rain to stop 😉
@rc_tom2 ай бұрын
Aua das Geräusch tut weh😮
@rc_michi2 ай бұрын
Ja. Zum Glück kein wirklicher Schaden. Das Hauptzahnrad wurde nur etwas am Rand angeschrägt 😅
Пікірлер
Respekt😯. Das ist ja schon mal eine Hausnummer.
Ich nö 😂😂😂 Das mit 2S . Ich pack ein und bleib zu Hause 😁 Geiler Lauf 👍👍👍👍🤩 Bin dann mal auf 3S gespannt. Wieviel KV sind 6,5 T in etwa ? Viele Grüße. P.S. Werde Dich bestimmt noch nerven, wenn meiner Kac… läuft 😁
@@msfunracer Danke! Dabei sein ist alles 😅Sind laut Hersteller 5350 KV, allerdings mit Standard-Timing. Also in der Realität wahrscheinlich eher mehr 😉 Klar, wir helfen uns gegenseitig. Dafür ist eine Community doch da 😊👍
Great pass buddy!👊👍👍
Thanks buddy! I'm curious to see if I can maintain this at higher speeds 😅
Nice shakedown runs. It looks fast and stable!
Thanks buddy! I saw your shakedowns, also very nice. Only the curbs hurt 😅
Awesome setup and nice smooth pass! I was guessing in the low 70s, but it must be the size of the car that makes it look faster.
Thanks bro! 70s next time 😅
😮 hyper stable 😮 Well done (except I barely saw the screen of the phone 🧐)👍🤝
Thanks buddy! Yes, the lightning of the phone display was set too low... Next time I'll do it better 😉
Good stuff Mich, 😎🤙👍
Thank you my friend! 😊
What diff gears are you running?
None in the front (spool), rear Tamiya part # 54875
That is going so straight
@@thebandit1974 Getting a Tamiya running straight is one of the harder jobs. But with a bit of experience and setup you can do it 😉
Smokin. 😎🤙
Car looks awesome! That was the straightest I’ve seen one go so far! 😂🤜🤛
@@Rcprescription Thanks bro! I'll give my best 😅
❤Racing time 👍🔥😎👑🏆😍🤩🤣😊🌞😇
@@Gernotrametsteiner-dl6ns Hell yeah 😀👍
That's quick for the small wheels, best of luck, I am entering the brushed class.
@@SkippyRC Thanks buddy, I wish you also good luck! 👍
Can't wait to see your runs
@@JoevsRc Always appreciated bro 😁 Are you also part of the party?
@rc_michi I will be going In . I just finished the build and Will have an intro video in a few days
@@JoevsRc Glad to hear, so I'm excited! 👍
Well done 👏 this years speedrun will be very interesting 👍
@@electricnitrorc Thanks buddy! You have my full agreement 😉
Ya buddy looks like a ripper.. Let the fun begin..
@@reitplace4765 I hope she is one too 😅 The fun has already begun, just waiting for the challenge to start 😁 What's the status of your TT02 challenge?
Nice run👍 I still cannot make up my mind to join this year or next year.
@@MechanicallyFun Thanks! Thats shame, so I wish you much fun with your other projects 😉
She looks fast already! Have fun!
@@poorboysrc Thanks! Yes, she is already. But the small wheels make it slower. Its a really smooth car, nice choice for the challenge 😉
Niiice! There's just something special about that Escort body. It's timeless, and great to see you got it running smoothly in the test footage
@@scaleworksRC Thanks! Its really a great looking car, so I always wanted to have one. Now it was a good chance to get one 😉
After looking for ages, I've finally bought an 037 TA02S. £120 off Ebay, it's a fully completed but never ran shelf queen with a brushed system in it.. I'm really looking forward to it arriving... I'm going to fit a mild brushless system in it as soon as I get it... Do you have any tips for running a TA02 on brushless.? Stay safe out there mate & the very best wishes from Scotland 🏴 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍 👍
Hey Alan, congrats, thats a great purchase! I would recommend the reinforced cardan shaft, CVDs in the front and the 66T spur gear. That should be enough for now. Brushless motor should have around 3000 KV. Thanks and also best wishes from germany. Always appreciated! 😄
👌and she drove away!😂👊👍👍
Blitz 💥 😂 Wahnsinn 🤩 Das Du noch siehst wo Du lang fährst 👍👍👍
do u use any gyro for added stability
That's excellent!!!
Awesome run brother! You are the only one with a more sketchy road than me!..😂🤜🤛👍
Thanks bro. Yeah, perfect for rally 😅
Great run buddy!👌👍👍👊
Hol dir mal ein hobao vte 2 dann locker 300
Ganz so locker gehen 300 selbst mit nem Hobao nicht. Da muss man schon einiges machen. Erstmal die Kleinen ausreizen 😅
@SabineVetter-iq9dr so einfach ist das mit einem VTE2 auch nicht...und ich glaube, er möchte seinen TT02 weiterbringen ;)
Da habt ihr recht
Awesome runs brother!!… you have that dude dialed in! 🤜🤛
Thanks brother! 👊
Very nice clean passes! I see you like running your motors at 20 degrees timing. I played around with mine and got to 11 degrees with no benefits on the 5900kv motor, so I went back to zero. I wonder what the difference in speed is 🤔
Thanks bro! 👊 The timing should always result in an increase in performance. Otherwise the ESC or the battery could be too weak, or the gear ratio is too low.
@@rc_michi Gotcha.. I'll have to play around with that once I decide to run again. Have a great rest of your day!
Wow she's flying. And it's so beautiful there. Where are you at? 👊
Thank you! 😊 It's in the south of Bavaria!
Wow you got nice straight and empty roads. And beautiful runs. Liked and subscribed. Cheers! 😎🔥
Thanks buddy, much appreciated! 😄👊
What pitch is the gear?
It's Tamiya Modul 0.6. Similar to 48 pitch, but not compatible.
Du musst mal wieder die Scheiben putzen 😁
Da hast du allerdings recht 😅
Kenn ich 😂
Very nice.. and on a rally chassis!
Thanks bro! Yeah, I should try this on gravel 😅
@@rc_michi I hope it's smooth and straight 🙏 😁
@@scaleworksRC One of the best cars designed by Tamiya 👍
@@rc_michi agreed, but I'm leaning toward the Xv02.. I like the shaft drive better than belts
@@scaleworksRC The sound is definitely better 😅
Da wollte der xv01 schwimmen gehen
Der hält das aus zum Glück 😅
Gratuliere dir zum pb 🎉
Danke dir! 😊
Bau dir mal ein tp 3060 motor in dein Auto
@@SabineVetter-iq9dr Kommt noch. Erstmal den aktuellen ausreizen 😉
Very nice passes! Congrats on your PB! 🎉🏅🎊
Thanks bro! 200 are within reach 😉👍
@@rc_michi You can do it! I'm messing around with a boat right now.. re-painting and getting ready for a maiden voyage hopefully before dark! It says 45km/h (basically 28mph) on the box, but I'm gonna try for 30mph 👍🚤💨
Nice Mich....
Thanks buddy! 124 next time 😅👍
@@rc_michi get it!!!!!
Geiles Ding. Gratuliere zur PB 💪🏻
Danke dir! ☺👍
"When this baby hits 88 mph, you are going to see some serious sh*t." Keep pushing, it took me forever to get my Bandit up to 100 mph on 3s!
Yeah, I should have got a Delorean body 😂 One of my favourite movies, absolutely love it! Still trying to improve my current PB of 106 😉
@@rc_michi that would have been awesome if one would fit. 106 is great…. I took a break from going faster as I was worried I was just going to crash. 😂
Nice runs buddy! 👍 What's your replacement esc going to be MMX8S? subd!
Thanks buddy, much appreciated! Yeah, the MM8XS is already built in! Currently I'm waiting for the rain to stop 😉
Aua das Geräusch tut weh😮
Ja. Zum Glück kein wirklicher Schaden. Das Hauptzahnrad wurde nur etwas am Rand angeschrägt 😅