What is the 5th bolt closest to the terminal for? Can that be used if there is already an in-line fuse on the wire?
@almirvelic640113 күн бұрын
That holds the whole terminal part, I'm actually looking for the nut size for that 😂
@aziyana_thevibe6 ай бұрын
Omg thanks so much you just made my day cause I was over it just now lol
@baraajtalib36937 ай бұрын
I have a different issue the screen still active in the parking lot or in charging time🤷🏻♀️
@Lemonhead88907 ай бұрын
use an extension......... why dude? and if you are afraid of hitting the windshield... cover it...
@ComputersSecurityAudioW9 ай бұрын
Well done, the video is well explained
@brahimholguinveras64289 ай бұрын
why you didnt install it under drivers seat?
@Aaronjaycardwell9 ай бұрын
Have one in my F150, super simple, sounds great. Love it.
@joshr1982110 ай бұрын
Curious do you know off the top of your head, what ford sells the factory speakers for? I am going all kicker with a hideaway amp myself
@joshr1982111 ай бұрын
My plan is to actually hide away behind that panel. So is wire running the same if you don’t use that fuse box you have on the back panel? I am thinking I won’t do that and just tie into the front two speakers
@joshr1982111 ай бұрын
And this doesn’t require a amp with it will I?
@joshr1982111 ай бұрын
Thank you so much for this!!! How did you deactivate your start/stop bs
@francisgarcia8511 ай бұрын
Hello Cory, good installation instructions video. Please provide speaker sizes and brand please. I'm also planning to upgrade my crappy speaker system on my 2023 Outer banks sasquatch. Thank you in advance brother.
@josiebaxter638411 ай бұрын
A bronco isn't a truck
@zocram2211 ай бұрын
perfetto grazie
@theotherone58 Жыл бұрын
I passed though the same grommet for my install. I sealed it with "duct seal".
@BradleyJokerst Жыл бұрын
I noticed your blue power light was on in the video. Was the vehicle on? I have the plug n play kit and assumed the remote turn on was wired in with the harness somewhere, but when I have the sub in DC, the blue power light stays on when the truck is off. Do you think I’d still have to tap-in to one of the 6.5’s?
@garretkom Жыл бұрын
Are these speakers now plug n play? Or do you still need the t clips or is the connector now available?
@mikeduron5315 Жыл бұрын
Where is good ground located in cargo area??
@Slideyslide Жыл бұрын
How is the bass compared to a truck box? Does it suck? I am looking at one because I can hid it under my trunk floor but am concerned it won't have enough of an impact on my Bose system. I had a Rockford fostgate 10" truck box before and it was plenty. I would be ok if it didn't hit as hard but I'm getting mixed reviews so any input would be helpful.
@mikefernandez499 Жыл бұрын
You’re brave, I would be worried that I would screw something up knowing my luck.
@ItsFrankieBoy Жыл бұрын
What AWG t connector do you use?
@ecobooster8298 Жыл бұрын
Cool video Cory!! Just in case you don't know about android dongles for your screen, check out my Sync 3 hack video!!
@anthonygallo3576 Жыл бұрын
Thats the band i woukd have used to test the speakers. Two questions, my wildtrak has a sub woofer, i see u didnt change that. Also,, you dont need an amp? .did you use bass blockers in thr dash speakers?
@drew.mateja Жыл бұрын
I want to say a massive THANK YOU for making this video… I’m looking to do Kicker KS Series 4”/6.75” speakers and the 46HS10 in my 2022 Black Diamond. If your views on this video double, it’s probably because I’m watching this constantly. 😂
@Lbintab Жыл бұрын
Not sure if it was mentioned but you should have you fuse box closer to the battery. If you were to ground out or blow that fuse it could burn all that power wire all the way to the fuse box. A good rule is to be within 12 inches from the batter.
@SouthDFWrep Жыл бұрын
Great video. Any reason you went passenger side and not driver side?
@jmilley1986 Жыл бұрын
How did you get the Right side speaker wire over to driverside?And where do the wires tie in at?
@SouthDFWrep Жыл бұрын
Great video!!!!
@wayneduhon7011 Жыл бұрын
Dude just take it out of the bag!
@connormuench8489 Жыл бұрын
For the front speakers, was it the Metra 72-5603 that didn’t fit?
@coyote208 Жыл бұрын
LOL. Unfortunately your video leave out some crucial information.. wire gauge.. which one is positive/negative. And wtf is done after the t connectors. I shouldn’t have followed this video because I’m about to out the t connectors on and I have no idea what I’m going to do next. This video only helped me understand what was under the speaker cover.. which I was going to find out anyways. Waste of time dude
@johnnypipe Жыл бұрын
Nice video but I have one question or observation. Unless something has changed that I don't know about, the proper way to check oil level is after you turn off the engine and let it set for 10 to 15 minutes. Not while the engine is running. Seeing where that filter is mounted, I would like to see the engineering degree of the fellow that designed that. That's what I liked about old Fords from the 60's and early 70's. Did not make any difference if it was a straight six, 289, 302, or 427 they all took an FL 1A filter, and they were ease to get to. Nice bronco.
@christianlatshaw1767 Жыл бұрын
what wires on the kickpanel speakers do i tap? been trying to figure it out and cant get a straight answer. thanks
@natalied3912 Жыл бұрын
Thanks, what is the bolt size for the negative side battery?
@PilotVBall Жыл бұрын
You should have bought a Tesla. You paid the dealer a huge dealer premium. The dealer fraudulently modified the window sticker with "dealer installed options" that have a 3000% markup. Tesla doesn't do that.
@bobdobalina7058 Жыл бұрын
Possibly a dumb question 😂 there is a cigarette style power source in the back of the bronco, could you tap into that instead of running power cable all the way to the battery?
@romainrisch9184 Жыл бұрын
Hi, problem still exist in 2023. Have had the same problem today. Thanks for posting the fix!
@jeffrice7725 Жыл бұрын
Thank you for posting this information. I added a towing harness control module tonight and ran the positive wire directly to one of these battery accessory points per the manufacturer's instructions, but I was going to have to go to the hardware store this week to test which size nuts fit on either open power accessory point to complete the job. I don't know why Ford didn't just place a set on the threaded studs during assembly so they could be used when we needed them during a project. They are definitely convenient to use to add new powered accessories items to the Bronco. You saved me some time trying to find the correct sizes.....Thanks again.
@bivbivi Жыл бұрын
Worked like a charm for me. Thanks!
@MrStingraybernard Жыл бұрын
Crutch field sells the plug in wire with right polarity, no clips needed
@Camaro1019 Жыл бұрын
Can you share which of the 4 wires in the kick panel you tapped into on each side?
@darrendaine4914 Жыл бұрын
Oh copyright ding on the music
@yira8656 Жыл бұрын
Thank you 😊
@trialmx Жыл бұрын
Where did you mount the harness ground wire? I'm looking at the ground point where the light and power output aft of the cubby but want to find one under the back seat.
@coryd9164 Жыл бұрын
I mounted the ground to a bolt near the seatbelt. I’ll check if I have any photos.
@deanhintzman2457 Жыл бұрын
Did you do anything with the sub?
@seattlecy Жыл бұрын
Thanks a ton! First day of owning was freaking much appreciated!
@justinvaughnatx Жыл бұрын
Thanks just what I needed
@trackguy2004x1 Жыл бұрын
@cory d do you know if i can get the speaker harnesses for the 4" speakers now?
@sct8326 Жыл бұрын
I just stuffed the wires from my 6.5s into the stock connector, is that gonna impact sound quality?
Пікірлер
Great video
What is the 5th bolt closest to the terminal for? Can that be used if there is already an in-line fuse on the wire?
That holds the whole terminal part, I'm actually looking for the nut size for that 😂
Omg thanks so much you just made my day cause I was over it just now lol
I have a different issue the screen still active in the parking lot or in charging time🤷🏻♀️
use an extension......... why dude? and if you are afraid of hitting the windshield... cover it...
Well done, the video is well explained
why you didnt install it under drivers seat?
Have one in my F150, super simple, sounds great. Love it.
Curious do you know off the top of your head, what ford sells the factory speakers for? I am going all kicker with a hideaway amp myself
My plan is to actually hide away behind that panel. So is wire running the same if you don’t use that fuse box you have on the back panel? I am thinking I won’t do that and just tie into the front two speakers
And this doesn’t require a amp with it will I?
Thank you so much for this!!! How did you deactivate your start/stop bs
Hello Cory, good installation instructions video. Please provide speaker sizes and brand please. I'm also planning to upgrade my crappy speaker system on my 2023 Outer banks sasquatch. Thank you in advance brother.
A bronco isn't a truck
perfetto grazie
I passed though the same grommet for my install. I sealed it with "duct seal".
I noticed your blue power light was on in the video. Was the vehicle on? I have the plug n play kit and assumed the remote turn on was wired in with the harness somewhere, but when I have the sub in DC, the blue power light stays on when the truck is off. Do you think I’d still have to tap-in to one of the 6.5’s?
Are these speakers now plug n play? Or do you still need the t clips or is the connector now available?
Where is good ground located in cargo area??
How is the bass compared to a truck box? Does it suck? I am looking at one because I can hid it under my trunk floor but am concerned it won't have enough of an impact on my Bose system. I had a Rockford fostgate 10" truck box before and it was plenty. I would be ok if it didn't hit as hard but I'm getting mixed reviews so any input would be helpful.
You’re brave, I would be worried that I would screw something up knowing my luck.
What AWG t connector do you use?
Cool video Cory!! Just in case you don't know about android dongles for your screen, check out my Sync 3 hack video!!
Thats the band i woukd have used to test the speakers. Two questions, my wildtrak has a sub woofer, i see u didnt change that. Also,, you dont need an amp? .did you use bass blockers in thr dash speakers?
I want to say a massive THANK YOU for making this video… I’m looking to do Kicker KS Series 4”/6.75” speakers and the 46HS10 in my 2022 Black Diamond. If your views on this video double, it’s probably because I’m watching this constantly. 😂
Not sure if it was mentioned but you should have you fuse box closer to the battery. If you were to ground out or blow that fuse it could burn all that power wire all the way to the fuse box. A good rule is to be within 12 inches from the batter.
Great video. Any reason you went passenger side and not driver side?
How did you get the Right side speaker wire over to driverside?And where do the wires tie in at?
Great video!!!!
Dude just take it out of the bag!
For the front speakers, was it the Metra 72-5603 that didn’t fit?
LOL. Unfortunately your video leave out some crucial information.. wire gauge.. which one is positive/negative. And wtf is done after the t connectors. I shouldn’t have followed this video because I’m about to out the t connectors on and I have no idea what I’m going to do next. This video only helped me understand what was under the speaker cover.. which I was going to find out anyways. Waste of time dude
Nice video but I have one question or observation. Unless something has changed that I don't know about, the proper way to check oil level is after you turn off the engine and let it set for 10 to 15 minutes. Not while the engine is running. Seeing where that filter is mounted, I would like to see the engineering degree of the fellow that designed that. That's what I liked about old Fords from the 60's and early 70's. Did not make any difference if it was a straight six, 289, 302, or 427 they all took an FL 1A filter, and they were ease to get to. Nice bronco.
what wires on the kickpanel speakers do i tap? been trying to figure it out and cant get a straight answer. thanks
Thanks, what is the bolt size for the negative side battery?
You should have bought a Tesla. You paid the dealer a huge dealer premium. The dealer fraudulently modified the window sticker with "dealer installed options" that have a 3000% markup. Tesla doesn't do that.
Possibly a dumb question 😂 there is a cigarette style power source in the back of the bronco, could you tap into that instead of running power cable all the way to the battery?
Hi, problem still exist in 2023. Have had the same problem today. Thanks for posting the fix!
Thank you for posting this information. I added a towing harness control module tonight and ran the positive wire directly to one of these battery accessory points per the manufacturer's instructions, but I was going to have to go to the hardware store this week to test which size nuts fit on either open power accessory point to complete the job. I don't know why Ford didn't just place a set on the threaded studs during assembly so they could be used when we needed them during a project. They are definitely convenient to use to add new powered accessories items to the Bronco. You saved me some time trying to find the correct sizes.....Thanks again.
Worked like a charm for me. Thanks!
Crutch field sells the plug in wire with right polarity, no clips needed
Can you share which of the 4 wires in the kick panel you tapped into on each side?
Oh copyright ding on the music
Thank you 😊
Where did you mount the harness ground wire? I'm looking at the ground point where the light and power output aft of the cubby but want to find one under the back seat.
I mounted the ground to a bolt near the seatbelt. I’ll check if I have any photos.
Did you do anything with the sub?
Thanks a ton! First day of owning was freaking much appreciated!
Thanks just what I needed
@cory d do you know if i can get the speaker harnesses for the 4" speakers now?
I just stuffed the wires from my 6.5s into the stock connector, is that gonna impact sound quality?